RESUMEN
This work introduces a novel setup for computed tomography of heavy and bulky specimens at the SYRMEP beamline of the Italian synchrotron Elettra. All the key features of the setup are described and the first application to off-center computed tomography scanning of a human chest phantom (approximately 45â kg) as well as the first results for vertical helical acquisitions are discussed.
Asunto(s)
Sincrotrones , Tomografía Computarizada por Rayos X , Humanos , Tomografía Computarizada por Rayos X/métodos , Fantasmas de ImagenRESUMEN
While advanced imaging strategies have improved the diagnosis of bone-related pathologies, early signs of bone alterations remain difficult to detect. The Covid-19 pandemic has brought attention to the need for a better understanding of bone micro-scale toughening and weakening phenomena. This study used an artificial intelligence-based tool to automatically investigate and validate four clinical hypotheses by examining osteocyte lacunae on a large scale with synchrotron image-guided failure assessment. The findings indicate that trabecular bone features exhibit intrinsic variability related to external loading, micro-scale bone characteristics affect fracture initiation and propagation, osteoporosis signs can be detected at the micro-scale through changes in osteocyte lacunar features, and Covid-19 worsens micro-scale porosities in a statistically significant manner similar to the osteoporotic condition. Incorporating these findings with existing clinical and diagnostic tools could prevent micro-scale damages from progressing into critical fractures.
RESUMEN
Introduction: Synchrotron-based propagation-based imaging (PBI) is ideally suited for lung imaging and has successfully been applied in a variety of in vivo small animal studies. Virtually all these experiments were tailored to achieve extremely high spatial resolution close to the alveolar level while delivering high x-ray doses that would not permit longitudinal studies. However, the main rationale for performing lung imaging studies in vivo in small animal models is the ability to follow disease progression or monitor treatment response in the same animal over time. Thus, an in vivo imaging strategy should ideally allow performing longitudinal studies. Methods: Here, we demonstrate our findings of using PBI-based planar and CT imaging with two different detectors-MÖNCH 0.3 direct conversion detector and a complementary metal-oxide-semiconductor (CMOS) detector (Photonics Science)-in an Ovalbumin induced experimental allergic airway disease mouse model in comparison with healthy controls. The mice were imaged free breathing under isoflurane anesthesia. Results: At x-ray dose levels below those once used by commercial small animal CT devices at similar spatial resolutions, we were able to resolve structural changes at a pixel size down to 25 µm and demonstrate the reduction in elastic recoil in the asthmatic mice in cinematic planar x-ray imaging with a frame rate of up to 100 fps. Discussion: Thus, we believe that our approach will permit longitudinal small animal lung disease studies, closely following the mice over longer time spans.
RESUMEN
The world of complementary and alternative medicine (CAM) encompasses a wide range of practices, treatments, and products that fall outside the realm of conventional (mainstream) medicine. The use of complementary and CAM has become increasingly popular in Western nations. People are turning to CAM for a variety of reasons, including managing chronic diseases, relieving symptoms of various conditions, and improving their overall health and well-being. There's a growing trend of people using and showing interest in complementary and alternative medicine therapies, especially in Western countries. CAM encompasses a wide range of treatments, some offering complete alternatives to conventional medicine, while others aim to complement existing medical approaches. Urologists should stay informed about CAM to guide their patients effectively to treat patients in a modern and personalized way. The aim of review is to analyze the scenario of complimentary and alternative medicine with a specific focus in the urological field.
RESUMEN
Pulmonary fibrosis (PF) is a severe and progressive condition in which the lung becomes scarred over time resulting in pulmonary function impairment. Classical histopathology remains an important tool for micro-structural tissue assessment in the diagnosis of PF. A novel workflow based on spatial correlated propagation-based phase-contrast micro computed tomography (PBI-microCT), atomic force microscopy (AFM) and histopathology was developed and applied to two different preclinical mouse models of PF - the commonly used and well characterized Bleomycin-induced PF and a novel mouse model for progressive PF caused by conditional Nedd4-2 KO. The aim was to integrate structural and mechanical features from hallmarks of fibrotic lung tissue remodeling. PBI-microCT was used to assess structural alteration in whole fixed and paraffin embedded lungs, allowing for identification of fibrotic foci within the 3D context of the entire organ and facilitating targeted microtome sectioning of planes of interest for subsequent histopathology. Subsequently, these sections of interest were subjected to AFM to assess changes in the local tissue stiffness of previously identified structures of interest. 3D whole organ analysis showed clear morphological differences in 3D tissue porosity between transient and progressive PF and control lungs. By integrating the results obtained from targeted AFM analysis, it was possible to discriminate between the Bleomycin model and the novel conditional Nedd4-2 KO model using agglomerative cluster analysis. As our workflow for 3D spatial correlation of PBI, targeted histopathology and subsequent AFM is tailored around the standard procedure of formalin-fixed paraffin-embedded (FFPE) tissue specimens, it may be a powerful tool for the comprehensive tissue assessment beyond the scope of PF and preclinical research.
Asunto(s)
Fibrosis Pulmonar , Animales , Ratones , Fibrosis Pulmonar/patología , Microtomografía por Rayos X/métodos , Microscopía de Fuerza Atómica , Pulmón/anatomía & histología , BleomicinaRESUMEN
The investigation of destruction processes in composite materials is a current problem for their structural application and the improvement of their functional properties. This work aimed to visualize structural changes induced in layered carbon fiber reinforced plastics (CFRP) with the help of synchrotron X-ray microtomography. This article presents the details of destructive processes in the early stages of the deformation of reinforced polymers under uniaxial stretching, investigated at the micro level. Individual structural elements of the composite-filaments, parallel fiber bundles, the nonuniformity of the polymer binder distribution, and continuity defects-were observed under an external load. We have considered the influence of the material architecture and technological defects on fracture evolution in cross-ply and quasi-isotropic fiber-reinforced plastics. The results indicate the sequence of irreversible structural changes before the destruction of the material.
RESUMEN
Hydroxyapatite is one of the materials of choice for tissue engineering bone scaffolds manufacturing. Vat photopolymerization (VPP) is a promising Additive Manufacturing (AM) technology capable of producing scaffolds with high resolution micro-architecture and complex shapes. However, mechanical reliability of ceramic scaffolds can be achieved if a high fidelity printing process is obtained and if knowledge of the intrinsic mechanical properties of the constituent material is available. As the hydroxyapatite (HAP) obtained from VPP is subjected to a sintering process, the mechanical properties of the material should be assessed with specific reference to the process parameters (e.g. sintering temperature) and to the specific characteristic size of the microscopic features in the scaffolds. In order to tackle this challenge the HAP solid matrix of the scaffold was mimicked in the form of miniaturized samples suitable for ad hoc mechanical characterization, which is an unprecedented approach. To this purpose small scale HAP samples, having a simple geometry and size similar to that of the scaffolds, were produced through VPP. The samples were subjected to geometric characterization and to mechanical laboratory tests. Confocal laser scanning and Computed micro-Tomography (micro-CT) were used for geometric characterization; while, micro-bending and nanoindentation were used for mechanical testing. Micro-CT analyses have shown a highly dense material with negligible intrinsic micro-porosity. The imaging process allowed quantifying the variation of geometry with respect to the nominal size showing high accuracy of the printing process and identifying printing defects on one specific sample type, depending on the printing direction. The mechanical tests have shown that the VPP produces HAP with an elastic modulus as high as approximately 100GPa and flexural strength of approximately 100MPa. The results of this study have shown that vat photopolymerization is a promising technology capable of producing high quality HAP with reliable geometric fidelity.
Asunto(s)
Durapatita , Impresión Tridimensional , Reproducibilidad de los Resultados , Andamios del Tejido , Ingeniería de Tejidos/métodos , PorosidadRESUMEN
Plant hydraulic traits related to leaf drought tolerance, like the water potential at turgor loss point (TLP) and the water potential inducing 50% loss of hydraulic conductance (P50), are extremely useful to predict the potential impacts of drought on plants. While novel techniques have allowed the inclusion of TLP in studies targeting a large group of species, fast and reliable protocols to measure leaf P50 are still lacking. Recently, the optical method coupled with the gas injection (GI) technique has been proposed as a possibility to speed up the P50 estimation. Here, we present a comparison of leaf optical vulnerability curves (OVcs) measured in three woody species, namely Acer campestre (Ac), Ostrya carpinifolia (Oc) and Populus nigra (Pn), based on bench dehydration (BD) or GI of detached branches. For Pn, we also compared optical data with direct micro-computed tomography (micro-CT) imaging in both intact saplings and cut shoots subjected to BD. Based on the BD procedure, Ac, Oc and Pn had P50 values of -2.87, -2.47 and -2.11 MPa, respectively, while the GI procedure overestimated the leaf vulnerability (-2.68, -2.04 and -1.54 MPa for Ac, Oc and Pn, respectively). The overestimation was higher for Oc and Pn than for Ac, likely reflecting the species-specific vessel lengths. According to micro-CT observations performed on Pn, the leaf midrib showed none or very few embolized conduits at -1.2 MPa, consistent with the OVcs obtained with the BD procedure but at odds with that derived on the basis of GI. Overall, our data suggest that coupling the optical method with GI might not be a reliable technique to quantify leaf hydraulic vulnerability since it could be affected by the 'open-vessel' artifact. Accurate detection of xylem embolism in the leaf vein network should be based on BD, preferably of intact up-rooted plants.
Asunto(s)
Acer , Embolia , Microtomografía por Rayos X , Hojas de la Planta , Xilema , Agua , SequíasRESUMEN
(1) Recent studies suggested that stem photosynthesis could favor bark water uptake and embolism recovery when stem segments are soaked in water under light conditions, but evidence for this phenomenon in drought-resistant Mediterranean species with photosynthetic stems is missing. (2) Embolism recovery upon immersion in water for 2 h-4 h under light was assessed (i) via a classical hydraulic method in leafless Fraxinus ornus and Olea europaea branch segments stressed to xylem water potentials (Yxyl) inducing ca. 50% loss of hydraulic conductivity (PLC) and (ii) via X-ray micro-CT imaging of the stem segments of drought-stressed potted F. ornus saplings. Hydraulic recovery was also assessed in vivo in intact drought-stressed F. ornus saplings upon soil re-irrigation. (3) Intact F. ornus plants recovered hydraulic function through root water uptake. Conversely, the soaked stem segments of both species did not refill embolized conduits, although Yxyl recovered to pre-stress levels (between -0.5 MPa and -0.2 MPa). (4) We hypothesize that xylem embolism recovery through bark water uptake, even in light conditions, may not be a common phenomenon in woody plants and/or that wounds caused by cutting short stem segments might inhibit the refilling process upon soaking.
RESUMEN
Most tissues in clinical practice are formalin-fixed and paraffin-embedded for histological as well as molecular analyses. The reproducibility and uniformity of molecular analyses is strictly dependent on the quality of the biomolecules, which is highly influenced by pre-analytical processes. In this study, the effect of different fixatives was compared, including formalin, Bouin's solution, RCL2® and TAG-1™ fixatives, by stringent application of ISO standards in mouse liver tissue processing, including formalin-free transport of tissues and tissue grossing in a refrigerated environment. The effect of fixatives was studied in terms of nucleic acid quality at the time of tissue processing and after one year of tissue storage at room temperature in the dark. Furthermore, a microcomputed tomography (CT) scan analysis was applied to investigate the paraffin embedding. The results show that the application of ISO standards in tissue processing allows analysis of 400 bases amplicons from RNA and 1000 bases from DNA, even in extracts from formalin-fixed and paraffin-embedded tissues. However, after one year storage at room temperature in the dark, a degradation of the nucleic acids was observed. Nevertheless, extracts can still be analyzed, but for metachronous tests it is highly recommended to repeat the quantitation of housekeeping genes in order to standardize the extent of nucleic acid degradation.
Asunto(s)
Formaldehído , Ácidos Nucleicos , Animales , Fijadores , Ratones , Ácidos Nucleicos/genética , Estándares de Referencia , Reproducibilidad de los Resultados , Fijación del Tejido/métodos , Microtomografía por Rayos XRESUMEN
The use of antibody and peptide functionalized semiconductor quantum dots holds considerable potential for specific labeling of target antigens and high resolution optical imaging of biological preparations. Despite this potential, their use in neuroscience is not yet widespread; a number of technical and methodological challenges must still be overcome in order to produce reliable and reproducible labeling protocols. We have optimized and used anti-GFAP functionalized quantum dots for specific labeling of intermediate filaments in astrocyte and Müller glial cells in sections of intact rat neural sensory retina and dissociated primary spinal cord astrocytes. These techniques produced stable and robust imaging of retinal astrocytes and Müller cells with minimal non-specific background labeling and intense fluorescence resulting in a high signal to noise ratio. This resulted in clear and efficient labeling of normal levels of GFAP in the retina and the ability to differentiate it from pathologically high levels of GFAP associated with reactive gliosis in a laser induced injury model. Labeling and imaging of dissociated astrocytes demonstrated the presence of what appeared to be highly complex organizations of fine intermediate filaments that spanned between cells to form intricate networks of filamentous intercellular bridges. The presence of these structures in situ and in vivo as well as any potential functions remain to be determined, but their identification should be greatly facilitated by quantum dot labeling protocols.