Evolution of the throwing shoulder: why apes don't throw well and how that applies to throwing athletes.

BACKGROUND: Humans have unique characteristics making us the only primate that can throw well while most other primates throw predominately underhand with poor speed and accuracy. The purpose of this study is to illuminate the uniquely human characteristics that allow us to throw so well. When treating an injury such as a labral tear or capsule tear, this study hopes the reader can gain a better understanding of the issues that lead to the tear and those that may determine the success of treatment besides the actual repair. METHODS: In addition to a review of scientific and medical literature, information was obtained from interviews and experience with primate veterinarians, anthropologists, archeologists, and professional baseball players. These sources were used to study the connection between evolutionary throwing activities and current sports medicine issues. RESULTS: Arm acceleration requires a functional kinetic chain, rapid motor sequences, and the ability to absorb elastic energy in the shoulder. Successful treatment of the throwing shoulder requires awareness of the shoulder's position in the kinetic chain and correction of defects in the ability to execute the kinetic chain. Some problems in the shoulder could reflect regression to a more primitive anatomy or dyskinesis. Return of performance requires regaining the elasticity in the tissues of the shoulder to temporarily store kinetic energy. For example, tissue remodeling after rotator cuff repair continues for months to years; however, the newly formed tissue lacks the same elasticity of the native tendon. This suggests why throwing performance typically does not return for 7 or more months after repair even though there may be structural integrity at 3-4 months. CONCLUSION: The shoulder has developed uniquely in modern man for the act of throwing. The anatomic deficiencies in primates for throwing provide an illustration of the more subtle changes that a throwing athlete might have that are detrimental to throwing. Nonhuman primates have been unable to demonstrate the kinetic chain sequence for throwing secondary to the lack of neurologic pathways required. Humans are more sophisticated and precise in their movements but lack robusticity in their bone and muscle architecture, seen especially in the human rotator cuff. Successful treatment of a throwing injury requires familiarity with the conditions that cause the injury or affect the rehabilitation process. The return of performance following injury or surgery requires regaining the elasticity in the tissues of the shoulder to temporarily store kinetic energy from the kinetic chain.

In Vivo Kinematics and Cruciate Ligament Tension Are Not Restored to Normal After Bicruciate-Preserving Arthroplasty.

BACKGROUND: Whether cruciate ligament forces in cruciate-preserving designs, such as unicompartmental knee arthroplasty (UKA) or bi-cruciate-retaining total knee arthroplasty (BCR-TKA), differ from those in normal knees remains unknown. The purpose of this study was to compare the in vivo kinematics and cruciate ligament force in knees before and after UKA or BCR-TKA to those in normal knees during high-flexion activity. METHODS: Overall, twenty normal knees, 17 knees with medial UKA, and 15 knees with BCR-TKA were fluoroscopically examined while performing a squatting activity. A 2-dimensional or 3-dimensional registration technique was employed to measure tibio-femoral kinematics. Ligament strains and tensions in the anteromedial bundle of the anterior cruciate ligament and posterolateral bundle of the anterior cruciate ligament and the anterolateral bundle of the posterior cruciate ligament (aPCL) and posteromedial bundle of the posterior cruciate ligament (pPCL) during knee flexion were analyzed. RESULTS: Tension in both bundles of the anterior cruciate ligament decreased with flexion. At 60° of flexion, anteromedial bundle of the anterior cruciate ligament tension in postoperative UKA knees was greater than that in normal knees. At 30° of flexion, posterolateral bundle of the anterior cruciate ligament tension in postoperative UKA knees was greater than that in normal knees. On the other hand, aPCL and pPCL tensions increased with flexion. From 40 to 110° of flexion, the postoperative aPCL tension in UKA knees was greater than that in normal knees. At 110° of flexion, the preoperative pPCL tension in UKA knees was greater than that in normal knees. In addition, the postoperative pPCL tension in UKA knees was larger than that in normal knees beyond 20° of flexion. Furthermore, the pPCL tension of postoperative BCR-TKA knees was larger than that in normal knees from 20 to 50° and beyond 90° of flexion. CONCLUSIONS: The cruciate ligament tensions, especially posterior cruciate ligament tension in knees after UKA, were greater than those in the normal knees. Surgeons performing bi-cruciat-preserving knee arthroplasties should therefore balance cruciate ligament tension more carefully in flexion and extension.

A Network Meta-Analysis of Randomized Controlled Trials Assessing Intraoperative Anesthetic Therapies for Analgesic Efficacy and Morphine Consumption Following Total Knee Arthroplasty.

BACKGROUND: The purpose of this study was to compare intraoperative anesthetic therapies for total knee arthroplasty (TKA) regarding postoperative analgesic efficacy and morphine consumption by conducting a systematic literature search. METHODS: Randomized controlled trials of TKA using various anesthetic therapies were identified from various databases from conception through December 31, 2021. A network meta-analysis of relevant literature was performed to investigate which treatment showed better outcomes. In total, 40 trials were included in this study. RESULTS: Surface under the cumulative ranking curve showed local infiltration anesthesia (LIA) with saphenous nerve block (SNB) to produce the best pain relief on postoperative days (PODs) 1 and 2 and the best reduction of morphine consumption on PODs 1 and 3. However, femoral nerve block showed the largest effect on pain relief on POD 3, and liposomal bupivacaine showed the largest effect on reduction of morphine consumption on POD 2. CONCLUSIONS: According to this network meta-analysis, surface under the cumulative ranking curve percentage showed that LIA with SNB provided the best analgesic effect after TKA. Furthermore, patients receiving LIA with SNB had the lowest consumption of morphine. Although femoral nerve block resulted in better pain relief on POD 3, LIA with SNB could be selected first when trying to reduce morphine consumption or increase early ambulation.

Senescent cell population with ZEB1 transcription factor as its main regulator promotes osteoarthritis in cartilage and meniscus.

OBJECTIVES: Single-cell level analysis of articular cartilage and meniscus tissues from human healthy and osteoarthritis (OA) knees. METHODS: Single-cell RNA sequencing (scRNA-seq) analyses were performed on articular cartilage and meniscus tissues from healthy (n=6, n=7) and OA (n=6, n=6) knees. Expression of genes of interest was validated using immunohistochemistry and RNA-seq and function was analysed by gene overexpression and depletion. RESULTS: scRNA-seq analyses of human knee articular cartilage (70 972 cells) and meniscus (78 017 cells) identified a pathogenic subset that is shared between both tissues. This cell population is expanded in OA and has strong OA and senescence gene signatures. Further, this subset has critical roles in extracellular matrix (ECM) and tenascin signalling and is the dominant sender of signals to all other cartilage and meniscus clusters and a receiver of TGFß signalling. Fibroblast activating protein (FAP) is also a dysregulated gene in this cluster and promotes ECM degradation. Regulons that are controlled by transcription factor ZEB1 are shared between the pathogenic subset in articular cartilage and meniscus. In meniscus and cartilage cells, FAP and ZEB1 promote expression of genes that contribute to OA pathogenesis, including senescence. CONCLUSIONS: These single-cell studies identified a senescent pathogenic cell cluster that is present in cartilage and meniscus and has FAP and ZEB1 as main regulators which are novel and promising therapeutic targets for OA-associated pathways in both tissues.

FOXO1 and FOXO3 transcription factors have unique functions in meniscus development and homeostasis during aging and osteoarthritis.

The objective of this study was to examine FoxO expression and FoxO function in meniscus. In menisci from human knee joints with osteoarthritis (OA), FoxO1 and 3 expression were significantly reduced compared with normal menisci from young and old normal donors. The expression of FoxO1 and 3 was also significantly reduced in mouse menisci during aging and OA induced by surgical meniscus destabilization or mechanical overuse. Deletion of FoxO1 and combined FoxO1, 3, and 4 deletions induced abnormal postnatal meniscus development in mice and these mutant mice spontaneously displayed meniscus pathology at 6 mo. Mice with Col2Cre-mediated deletion of FoxO3 or FoxO4 had normal meniscus development but had more severe aging-related damage. In mature AcanCreERT2 mice, the deletion of FoxO1, 3, and 4 aggravated meniscus lesions in all experimental OA models. FoxO deletion suppressed autophagy and antioxidant defense genes and altered several meniscus-specific genes. Expression of these genes was modulated by adenoviral FoxO1 in cultured human meniscus cells. These results suggest that FoxO1 plays a key role in meniscus development and maturation, and both FoxO1 and 3 support homeostasis and protect against meniscus damage in response to mechanical overuse and during aging and OA.

Bicruciate-retaining total knee arthroplasty procedure reduced tensile force in the middle and posterior components of lateral collateral ligament during deep knee flexion activities with no effect on tensile force of the medial collateral ligament.

PURPOSE: To analyse the effects of bicruciate-retaining total knee arthroplasty (BCR-TKA) on the tensile force of the collateral ligaments during two deep knee flexion activities, cross-leg sitting and squatting. METHODS: Thirteen patients (15 knees) treated using bicruciate-retaining total knee arthroplasty (BCR-TKA) for knee joint osteoarthritis were analysed. Knee joint kinematics during cross-leg sitting (open-chain flexion) and squatting (closed-chain flexion) were evaluated through fluoroscopy. The tensile force was calculated in vivo based on the change in the distance between the femoral and tibial attachment areas for the anterior, middle, and posterior components of the superficial (sMCL) and deep (dMCL) medial collateral ligament and the lateral collateral ligament (LCL). Differences in the calculated tensile forces of the collateral ligaments were evaluated using repeated measures of analysis of variance, with post hoc pairwise comparison (Bonferroni test). Statistical significance was set at P ≤ 0.05. RESULTS: The correction of the coronal alignment was related to the surgical technique, not to the implant design. No significant change in the tensile force in all three components of the sMCL from pre- to post-TKA (n.s.) was observed. For dMCL, a pre- to post-TKA change in the tensile force was observed only for the anterior dMCL component (p = 0.03). No change was observed in the tensile force of the anterior LCL with increasing flexion, with no difference in pre- to post-TKA and between activities (n.s.). In contrast, tensile force in the middle LCL slightly decreased with increasing flexion during squatting, pre- and post-TKA. After surgery, lower forces were generated at 40° of flexion (p = 0.04). Tensile force in the posterior LCL was higher in extension than flexion, which remained high in the extension post-TKA. However, after surgery, lower tensile forces were generated at 10° (p = 0.04) and 40° (p = 0.04) of flexion. CONCLUSIONS: The in vivo change in tensile forces of the collateral ligaments of the knee before and after BCR-TKA can inform the development of appropriate ligament balancing strategies to facilitate recovery of deep knee flexion activities after TKA, as well as for continued improvement of BCR-TKA designs. LEVEL OF EVIDENCE: III.

Repair of medial meniscus posterior root tear is effective for root healing and cartilage regeneration in opening wedge high tibial osteotomy.

PURPOSE: This study aimed to determine whether the repair of a medial meniscus posterior root tear (MMPRT) is effective for MMPRT healing, cartilage regeneration, and clinical outcomes in opening wedge high tibial osteotomy (OWHTO). METHODS: This retrospective study included 80 patients who underwent OWHTO and subsequent second-look arthroscopy. The patients were divided into OWHTO-with-MMPRT-repair (n = 40) and OWHTO alone (n = 40) groups, and the healing rates (complete/partial/failure) were compared. Each group was further divided into over- and under-corrected subgroups to compare healing rates. The International Cartilage Repair Society (ICRS) grade, cartilage defect size, Koshino stage, ICRS cartilage repair assessment score of the medial femoral condyle (MFC), and International Knee Documentation Committee (IKDC) scores between the OWHTO-with-MMPRT-repair and OWHTO alone groups were compared according to whether microfracture was performed on the MFC. RESULTS: The overall healing rate of the MMPRT was higher in the OWHTO-with-MMPRT-repair group than that in the OWHTO alone group (P < 0.001). In addition, in the subgroup analysis, no difference in the MMPRT healing rate between the over-correction and under-correction groups when MMPRT repair was performed (n.s). In contrast, without MMPRT repair, the healing rate was lower in the under-correction group than that in the over-correction group (P = 0.03). Cartilage regeneration of the OWHTO-with-MMPRT-repair group was superior to that of the OWHTO alone group (P < 0.05). The IKDC subjective scores of the OWHTO-with-MMPRT-repair and OWHTO alone groups were 34.5 and 33.1 before surgery (n.s) and 50 and 47.2 at one year after surgery, respectively (n.s). These differences between the two groups for cartilage regeneration and IKDC subjective scores showed the same pattern regardless of microfractures. CONCLUSIONS: MMPRT repair during OWHTO might improve MMPRT healing, even with under-correction, and cartilage regeneration of MFC, regardless of microfracture. However, OWHTO with MMPRT repair might not improve short-term clinical outcomes compared to OWHTO alone. Further randomized clinical trials are necessary. LEVEL OF EVIDENCE: III, Retrospective cohort study.

Subject-specific computational modeling of acromioclavicular and coracoclavicular ligaments.

BACKGROUND: Disruption of the acromioclavicular joint is a common injury. Despite the different surgical procedures described for treating this injury, complications such as loss of reduction and failure of fixation remain unacceptably high. We developed a computer model of the acromioclavicular joint to better understand the biomechanical contributions of the ligaments that are typically injured. METHODS: Six fresh frozen human cadaveric shoulders were tested on an AMTI VIVO 6-degree of freedom test platform to measure force-displacement in inferior translation, anteroposterior translation, and internal rotation before and after sequentially transecting the coracoclavicular and acromioclavicular ligaments. These data were used to construct computer models of each specimen. Three-dimensional computed tomographic scans were used to generate a rigid-body dynamics model using the AnyBody Modeling System. The scapula and clavicle were connected by the acromioclavicular joint capsule, the conoid ligament, and the trapezoid ligament. Subject-specific ligament properties were calculated by matching computer predictions to experimental force-displacement data. RESULTS: The calculated free lengths of the conoid, trapezoid, and acromioclavicular ligaments were 13.5 (±3.2), 11.8 (±2.4), and 11.0 (±2.7) mm, respectively. The calculated stiffnesses of the conoid, trapezoid, and acromioclavicular ligaments were 34.3 (±6.3), 28.4 (±3.2), and 33.8 (±8.2) N/mm, respectively. Root mean square deviation (RMSD) of predicted force-displacement curves relative to experimental force-displacement curves (during inferior and anteroposterior translation) was less than 1 mm. For validation of subject-specific models, after ligament properties were calculated, the RMSD of the predicted torque over 15° of internal rotation was 12% of maximum rotational torque (average for 6 specimens). DISCUSSION AND CONCLUSION: Acromioclavicular disruption results in multidirectional instability, which requires careful consideration of the individual contributions of the injured ligaments. In addition, variations in patient anatomy can significantly affect the biomechanical stability of the reconstruction. Subject-specific models can enhance our understanding of the individual and collective biomechanical contributions of the injured soft tissues to the multiaxial stability of the acromioclavicular joint. These models may also be useful for analyzing and assessing biomechanical stability after various types of surgical reconstruction.

Postoperative Valgus Laxity and Medial Pivot Kinematics Are Significantly Associated With Better Clinical Outcomes.

BACKGROUND: The relative impact of soft tissue balance and knee laxity on clinical outcomes after total knee arthroplasty (TKA) is not fully understood. We analyzed associations among knee laxity, kinematics, and patient-reported outcomes. METHODS: Knee Society Scores were recorded in 67 patients before and after primary TKA for osteoarthritis with varus deformity (N = 78). Varus and valgus laxity was measured in 78 knees using stress radiographs. Knee kinematics were measured fluoroscopically during stair ascent in 16 knees. RESULTS: On average, varus laxity decreased significantly, and valgus laxity increased significantly after TKA, although the net combined varus-valgus laxity did not change significantly. Postoperatively, the magnitude of valgus laxity correlated significantly with greater patient symptoms and satisfaction scores. Patients with medial pivot kinematics scored higher on patient satisfaction and standard activities. CONCLUSION: We found that postoperative valgus laxity and medial pivot kinematics were significantly associated with better clinical outcomes. These results emphasize the importance of careful preoperative planning and attention to intraoperative alignment and ligament balancing.

Cartilage tissue engineering combining microspheroid building blocks and microneedle arrays.

Purpose: Scaffold-free cartilage tissue engineering circumvents issues with scaffold seeding, potential toxicity response, and impaired host integration. However, precisely controlling and maintaining a scaffold-free construct shape have been challenging. We explored the feasibility of microneedle arrays to print tissue using cellular microspheroids as building blocks.Materials and Methods: Human embryonic-derived mesenchymal stem cells or infrapatellar fat pad mesenchymal stem cells were used to create microspheroids of 500 µm in diameter, which were assembled on microneedle arrays in a predefined arrangement using a robotic system under computer vision. Microspheroids on microneedles were cultured to permit fusion into a tissue construct. Infrapatellar fat pad mesenchymal stem cell constructs were either implanted into chondral defects created in human osteoarthritic cartilage explants or maintained on the microneedle array for 3 weeks. Embryonic-derived mesenchymal stem cell constructs were designed to be press-fit into 3 mm subchondral defects in New Zealand White rabbits and maintained for up to 8 weeks to assess retention, early tissue repair, and more mature cartilage regeneration.Results: Microspheroids of both cell types fused together in culture to form neotissues of predefined shape and size. Infrapatellar fat pad mesenchymal stem cell neotissues expressed high levels of chondrogenic genes and integrated with the surrounding osteoarthritic host cartilage. Embryonic-derived mesenchymal stem cell constructs generated chondrogenic neotissue in vivo as early as 2 weeks and more mature tissue by 8 weeks with increased glycosaminoglycan deposition.Conclusions: We constructed defined scaffold-free shapes by bioprinting and fusing microspheroids. Proof of concept was shown in the repair of ex vivo osteoarthritic human cartilage and in vivo rabbit osteochondral (OC) defects.

Bioactive proteins delivery through core-shell nanofibers for meniscal tissue regeneration.

Mimicking the ultrastructural morphology of the meniscus with nanofiber scaffolds, coupled with controlled growth-factor delivery to the appropriate cells, can help engineer tissue with the potential to grow, mature, and regenerate after in vivo implantation. We electrospun nanofibers encapsulating platelet-derived growth factor (PDGF-BB), which is a potent mitogen and chemoattractant in a core of serum albumin contained within a shell of polylactic acid. We controlled the local PDGF-BB release by adding water-soluble polyethylene glycol to the polylactic acid shell to serve as a porogen. The novel core-shell nanofibers generated 3D scaffolds with an interconnected macroporous structure, with appropriate mechanical properties and with high cell compatibility. Incorporating PDGF-BB increased cell viability, proliferation, and infiltration, and upregulated key genes involved in meniscal extracellular matrix synthesis in human meniscal and synovial cells. Our results support proof of concept that these core-shell nanofibers can create a cell-favorable nanoenvironment and can serve as a system for sustained release of bioactive factors.

Huge intrameniscal cyst successfully treated by open debridement and combined arthroscopic and open repair: a case report.

BACKGROUND: Meniscal cysts are not uncommon in clinical practice, with reported incidence rates varying from 1 to 22%. Most meniscal cysts are parameniscal cysts, which are created by extravasation of synovial fluid through the meniscal tear into the adjacent soft tissue. In contrast, intrameniscal cysts in which the fluid collects in the meniscus are very rare. We encountered a teenager with a huge intrameniscal cyst accompanied by a small vertical meniscal tear in the red-white zone of the upper surface of the medial meniscus. A literature search revealed no information regarding the appropriate treatment methods and results for this type of lesion. CASE PRESENTATION: A 14-year-old boy presented to our outpatient clinic because of right knee pain that had been present for the previous 2 months. The patient participated in Hapkido, but had no specific trauma history. Magnetic resonance imaging revealed a huge intrameniscal cyst located in the central parenchyma of the posteromedial corner of the medial meniscus. In addition, one sagittal slice on MRI revealed a vertical tear in the red-white zone of the upper surface of the medial meniscus. The presence of such a tear accompanied by a huge intrameniscal cyst is very unusual. The patient was treated via arthroscopic inside-out meniscal suture repair and open cystic debridement with additional meniscocapsular suturing. During 4 years of magnetic resonance imaging follow-up, the lesion has completely disappeared and the meniscus has successfully recovered its normal form. CONCLUSIONS: Our treatment method may be considered as the first choice for young patients who require surgical treatment for large intrameniscal cysts with accompanying small vertical meniscal tears.

A new scale measuring translation of the humeral head as a prognostic factor for the treatment of large and massive rotator cuff tears.

BACKGROUND: Failure rates after rotator cuff repair remain high in patients with massive tears. Although superior translation of the humeral head has been used to assess the severity of rotator cuff tears, the relevance of anterior migration of the humeral head to clinical outcomes has not been established. The purpose of this study was to investigate the potential role of the T-scale, a measure of the anterolateral translation of the humeral head, as a prognostic factor for rotator cuff repair. METHODS: One hundred twenty consecutive patients with full-thickness rotator cuff tears underwent primary rotator cuff repair. The T-scale and acromiohumeral interval (AHI) were measured preoperatively on axial computed tomography scans and radiographs, respectively. The correlations of the T-scale and AHI with previously published scores and active forward elevation (FE) were investigated. The outcome of rotator cuff repairs was compared between patients with positive and patients with negative preoperative T-scale values. RESULTS: The preoperative T-scale but not AHI correlated significantly with postoperative FE and clinical scores in patients with large to massive tears but not in those with small to medium tears. Postoperative FE and clinical scores were significantly higher in patients with positive T-scale values than in those with negative T-scale values. The relative risk of retear was 2.0 to 7.9 times greater in patients with negative T-scale values. CONCLUSION: Patients with large to massive tears and negative T-scale values had poorer clinical outcomes and higher retear rates. A negative T-scale value represents a useful prognostic factor for considering reverse shoulder arthroplasty in patients at greater risk of retear after rotator cuff repair.

Second-Generation Electronic Ligament Balancing for Knee Arthroplasty: A Cadaver Study.

BACKGROUND: Knee instability is emerging as a major complication after total knee arthroplasty (TKA), with ligament laxity and component alignment listed as important contributory factors. Knee balancing remains an art and is largely dependent on the surgeon's subjective "feel." The objectives were to measure the accuracy of an electronic balancing device to document the magnitude of correction in knee balance after soft-tissue releases and measure change in knee laxity after medial release. METHODS: The accuracy of a second-generation electronic ligament-balancing device was compared with that of 2 mechanical balancing instruments. TKA was performed in 12 cadaver knees. Soft-tissue balance was measured sequentially before TKA, after mounting a trial femoral component, after medial release, and after resecting the posterior cruciate ligament. Coronal laxity of the knee under a 10 Nm valgus moment was measured before and after medial release. RESULTS: The electronic balancing instrument was more accurate than mechanical instruments in measuring distracted gap and distraction force. On average, before TKA, the flexion gap was wider than the extension gap, and the medial gap was tighter than the lateral gap. Medial release increased the medial gap in flexion and increased passive knee valgus laxity. Posterior cruciate ligament release increased the tibiofemoral gap in both flexion and extension with a greater increase in the lateral gap. CONCLUSION: The second-generation electronic balancing device was significantly more accurate than mechanical instruments and could record knee balance over the entire range of flexion. More accurate soft-tissue balance may enhance outcomes after TKA.

Relevance of meniscal cell regional phenotype to tissue engineering.

PURPOSE: Meniscus contains heterogeneous populations of cells that have not been fully characterized. Cell phenotype is often lost during culture; however, culture expansion is typically required for tissue engineering. We examined and compared cell-surface molecule expression levels on human meniscus cells from the vascular and avascular regions and articular chondrocytes while documenting changes during culture-induced dedifferentiation. MATERIALS AND METHODS: Expressions of 16 different surface molecules were examined by flow cytometry after monolayer culture for 24 h, 1 week, and 2 weeks. Menisci were also immunostained to document the spatial distributions of selected surface molecules. RESULTS: Meniscus cells and chondrocytes exhibited several similarities in surface molecule profiles with dynamic changes during culture. A greater percentage of meniscal cells were positive for CD14, CD26, CD49c, and CD49f compared to articular chondrocytes. Initially, more meniscal cells from the vascular region were positive for CD90 compared to cells from the avascular region or chondrocytes. Cells from the vascular region also expressed higher levels of CD166 and CD271 compared to cells from the avascular region. CD90, CD166, and CD271-positive cells were predominately perivascular in location. However, CD166-positive cells were also located in the superficial layer and in the adjacent synovial and adipose tissue. CONCLUSIONS: These surface marker profiles provide a target phenotype for differentiation of progenitors in tissue engineering. The spatial location of progenitor cells in meniscus is consistent with higher regenerative capacity of the vascular region, while the surface progenitor subpopulations have potential to be utilized in tears created in the avascular region.

Translation of the humeral head scale is associated with success of rotator cuff repair for large-massive tears.

BACKGROUND: Although a loss of rotator cuff integrity leads to the superior migration of the humeral head, the parameters that characterize the anterolateral migration of the humeral head have not been established. The purpose of this study was to investigate the correlation between the translation of the humeral head scale (T-scale) and clinical outcomes of rotator cuff repair, as well as the correlation between the T-scale and radiologic parameters. METHODS: One hundred thirty-five consecutive patients with full-thickness rotator cuff tears underwent primary rotator cuff repair. The T-scale, which indicates the distance from the center of the humeral head to the lateral coracoacromial arch, was measured on axial computed tomography scans, and the acromiohumeral interval (AHI) was measured radiographically. The correlation of the two parameters with the clinical scores of the Japanese Orthopaedic Association and University of California-Los Angeles scores and active forward elevation (FE) were evaluated at the preoperative and postoperative stages, respectively. RESULTS: The postoperative T-scale and AHI correlated well with the postoperative FE and clinical scores in the patients with large-massive tears but not in those patients with small-medium tears and preoperative large-massive tears. A significant correlation was observed between the postoperative T-scale and AHI. The T-scale was subject to cuff repair integrity. CONCLUSIONS: We demonstrated that the postoperative T-scale was well correlated with the clinical results and postoperative AHI after rotator cuff repair for large-massive tears, indicating that poor outcomes are associated with combined superior and anterolateral migration of the humeral head following retears.

Posterior augmented glenoid implants require less bone removal and generate lower stresses: a finite element analysis.

HYPOTHESIS: Glenoid retroversion can be corrected with standard glenoid implants after anterior-side asymmetric reaming or by using posterior augmented glenoid implants with built-in corrections. The purpose of this study was to compare 2 augmented glenoid designs with a standard glenoid design, measure the amount of bone removed, and compute the stresses generated in the cement and bone. METHODS: Finite element models of 3 arthritic scapulae with varying severities of posterior glenoid wear were each implanted with 4 different implant configurations: standard glenoid implant in neutral alignment with asymmetric reaming, standard glenoid implant in retroversion, glenoid implant augmented with a posterior wedge in neutral alignment, and glenoid implant augmented with a posterior step in neutral alignment. The volume of cortical and cancellous bone removed and the percentage of implant back surface supported by cortical bone were measured. Stresses and strains in the implant, cement, and glenoid bone were computed. RESULTS: Asymmetric reaming for the standard implant in neutral version required the most bone removal, resulted in the lowest percentage of back surface supported by cortical bone, and generated strain levels that risked damage to the most bone volume. The wedged implant removed less bone, had a significantly greater percentage of the back surface supported by cortical bone, and generated strain levels that risked damage to significantly less bone volume. CONCLUSIONS: The wedged glenoid implants appear to have various advantages over the standard implant for the correction of retroversion. LEVEL OF EVIDENCE: Basic Science Study; Computer Modeling.

Ultrashort echo time magnetization transfer (UTE-MT) imaging of cortical bone.

Magnetization transfer (MT) imaging is one way to indirectly assess pools of protons with fast transverse relaxation. However, conventional MT imaging sequences are not applicable to short T2 tissues such as cortical bone. Ultrashort echo time (UTE) sequences with TE values as low as 8 µs can detect signals from different water components in cortical bone. In this study we aim to evaluate two-dimensional UTE-MT imaging of cortical bone and its application in assessing cortical bone porosity as measured by micro-computed tomography (µCT) and biomechanical properties. In total, 38 human cadaveric distal femur and proximal tibia bones were sectioned to produce 122 rectangular pieces of cortical bone for quantitative UTE-MT MR imaging, µCT, and biomechanical testing. Off-resonance saturation ratios (OSRs) with a series of MT pulse frequency offsets (Δf) were calculated and compared with porosity assessed with µCT, as well as elastic (modulus, yield stress, and strain) and failure (ultimate stress, failure strain, and energy) properties, using Pearson correlation and linear regression. A moderately strong negative correlation was observed between OSR and µCT porosity (R(2) = 0.46-0.51), while a moderate positive correlation was observed between OSR and yield stress (R(2) = 0.25-0.30) and failure stress (R(2) = 0.31-0.35), and a weak positive correlation (R(2) = 0.09-0.12) between OSR and Young's modulus at all off-resonance saturation frequencies. OSR determined with the UTE-MT sequence provides quantitative information on cortical bone and is sensitive to µCT porosity and biomechanical function.

Posterior augmented glenoid designs preserve more bone in biconcave glenoids.

BACKGROUND AND HYPOTHESIS: Total shoulder arthroplasty is recommended treatment for severe osteoarthritis of the glenohumeral joint, which often results in excessive posterior wear. Two recent glenoid components with posterior augments have been designed to correct excessive posterior wear and retroversion. Our primary hypothesis was that posterior augmented glenoid designs require less bone removal than a standard glenoid design. METHODS: Ten arthritic scapulae classified as Walch B2 glenoids were virtually implanted with standard, stepped, and wedged components. The volume of surgical bone removal, the maximum reaming depth, and the portion of the implant surface in contact with cancellous vs. cortical bone were calculated for each implant. RESULTS: The neoglenoid made up an average of 65% ± 12% of the glenoid width. Mean surgical bone volume removed was least for the wedged (2857 ± 1618 mm(3)) compared with the stepped (4307 ± 1485 mm(3); P < .001) and standard (5385 ± 2348 mm(3); P < .001) designs. Maximum bone depth removed for the wedged (4.2 ± 2.0 mm) was less than for the stepped (7.6 ± 1.2 mm; P < .001) and standard (9.9 ± 3.2 mm; P < .001). The mean percentage of the implant's back surface supported by cancellous bone was 18.2% for the standard, 8.8% for the stepped (P = .02), and 4.3% for the wedged (P = .01). DISCUSSION: Both augmented components corrected glenoid version to neutral and required less bone removal, required less reaming depth, and were supported by more cortical bone than in the standard implant. The least amount of bone removed was with the wedged design.