Strongly anisotropic ultrafast dynamic behavior of GaTe dominated by the tilted and flat bands.

The anisotropic transport properties of gallium telluride (GaTe) have been reported by several experiments, giving rise to many debates recently. The anisotropic electronic band structure of GaTe shows the extreme difference between the flat band and tilted band in two distinct directions,Γ¯-X¯andΓ¯-Y¯, and which we called as the mixed flat-tilted band (MFTB). Focusing on such two directions, the relaxation of photo-generated carriers has been studied using the non-adiabatic molecular dynamics (NAMD) method to investigate the anisotropic behavior of ultrafast dynamics. The results show that the relaxation lifetime is different in flat band direction and tilted band direction, which is evidence for the existence of anisotropic behavior of the ultrafast dynamic, and such anisotropic behavior comes from the different intensities of electron-phonon coupling of the flat band and tilted band. Furthermore, the ultrafast dynamic behavior is found to be affected strongly by spin-orbit coupling (SOC) and such anisotropic behavior of the ultrafast dynamic can be reversed by SOC. The tunable anisotropic ultrafast dynamic behavior of GaTe is expected to be detected in ultrafast spectroscopy experiments and it may provide a tunable application in nanodevice design. The results may also provide a reference for the investigation of MFTB semiconductors.

Dynamic and transient processes in warm dense matter.

In this paper, we discuss some of the key challenges in the study of time-dependent processes and non-equilibrium behaviour in warm dense matter. We outline some of the basic physics concepts that have underpinned the definition of warm dense matter as a subject area in its own right and then cover, in a selective, non-comprehensive manner, some of the current challenges, pointing along the way to topics covered by the papers presented in this volume. This article is part of the theme issue 'Dynamic and transient processes in warm dense matter'.

The thermodynamic-pathway-determined microstructure evolution of copper under shock compression.

Shock-induced structural transformations in copper exhibit notable directional dependence and anisotropy, but the mechanisms that govern the responses of materials with different orientations are not yet well understood. In this study, we employ large-scale non-equilibrium molecular dynamics simulations to investigate the propagation of a shock wave through monocrystal copper and analyse the structural transformation dynamics in detail. Our results indicate that anisotropic structural evolution is determined by the thermodynamic pathway. A shock along the [Formula: see text] orientation causes a rapid and instantaneous temperature spike, resulting in a solid-solid phase transition. Conversely, a liquid metastable state is observed along the [Formula: see text] orientation due to thermodynamic supercooling. Notably, melting still occurs during the [Formula: see text]-oriented shock, even if it falls below the supercooling line in the thermodynamic pathway. These results highlight the importance of considering anisotropy, the thermodynamic pathway and solid-state disordering when interpreting phase transitions induced by shock. This article is part of the theme issue 'Dynamic and transient processes in warm dense matter'.

Microstructure evolution under thermo-mechanical operating of rocksalt-structure TiN via neural network potential.

In the process of high temperature service, the mechanical properties of cutting tools decrease sharply due to the peeling of the protective coating. However, the mechanism of such coating failure remains obscure due to the complicated interaction between atomic structure, temperature, and stress. This dynamic evolution nature demands both large system sizes and accurate description on the atomic scale, raising challenges for existing atomic scale calculation methods. Here, we developed a deep neural network (DNN) potential for Ti-N binary systems based on first-principles study datasets to achieve quantum-accurate large-scale atomic simulation. Compared with empirical interatomic potential based on the embedded-atom-method, the developed DNN-potential can accurately predict lattice constants, phonon properties, and mechanical properties under various thermodynamic conditions. Moreover, for the first time, we present the atomic evolution of the fracture behavior of large-scale rocksalt-structure (B1) TiN systems coupled with temperature and stress conditions. Our study validates that interatomic brittle fractures occur when TiN stretches beyond its tensile yield point. Such simulation of coating fracture and cutting behavior based on large-scale atoms can shed new light on understanding the microstructure and mechanical properties of coating tools under extreme operating conditions.

Serum Protein Profiling Reveals a Landscape of Inflammation and Immune Signaling in Early-stage COVID-19 Infection.

Coronavirus disease 2019 (COVID-19) is a highly contagious infection and threating the human lives in the world. The elevation of cytokines in blood is crucial to induce cytokine storm and immunosuppression in the transition of severity in COVID-19 patients. However, the comprehensive changes of serum proteins in COVID-19 patients throughout the SARS-CoV-2 infection is unknown. In this work, we developed a high-density antibody microarray and performed an in-depth proteomics analysis of serum samples collected from early COVID-19 (n = 15) and influenza (n = 13) patients. We identified a large set of differentially expressed proteins (n = 132) that participate in a landscape of inflammation and immune signaling related to the SARS-CoV-2 infection. Furthermore, the significant correlations of neutrophil and lymphocyte with the CCL2 and CXCL10 mediated cytokine signaling pathways was identified. These information are valuable for the understanding of COVID-19 pathogenesis, identification of biomarkers and development of the optimal anti-inflammation therapy.

Phase-Changing in Graphite Assisted by Interface Charge Injection.

Among many phase-changing materials, graphite is probably the most studied and interesting: the rhombohedral (3R) and hexagonal (2H) phases exhibit dramatically different electronic properties. However, up to now the only way to promote 3R to 2H phase transition is through exposure to elevated temperatures (above 1000 °C); thus, it is not feasible for modern technology. In this work, we demonstrate that 3R to 2H phase transition can be promoted by changing the charged state of 3D graphite, which promotes the repulsion between the layers and significantly reduces the energy barrier between the 3R and 2H phases. In particular, we show that charge transfer from lithium nitride (α-Li3N) to graphite can lower the transition temperature down to 350 °C. The proposed interlayer slipping model potentially offers the control over topological states at the interfaces between different phases, making this system even more attractive for future electronic applications.

Comprehensive analysis of immunoglobulin and clinical variables identifies functional linkages and diagnostic indicators associated with Behcet's disease patients receiving immunomodulatory treatment.

BACKGROUND: Behcet's disease (BD) is a relapsing systemic vascular autoimmune/inflammatory disease. Despite much effort to investigate BD, there are virtually no unique laboratory markers identified to help in the diagnosis of BD, and the pathogenesis is largely unknown. The aim of this work is to explore interactions between different clinical variables by correlation analysis to determine associations between the functional linkages of different paired variables and potential diagnostic biomarkers of BD. METHODS: We measured the immunoglobulin proteome (IgG, IgG1-4, IgA, IgA1-2) and 29 clinical variables in 66 healthy controls and 63 patients with BD. We performed a comprehensive clinical variable linkage analysis and defined the physiological, pathological and pharmacological linkages based on the correlations of all variables in healthy controls and BD patients without and with immunomodulatory therapy. We further calculated relative changes between variables derived from comprehensive linkage analysis for better indications in the clinic. The potential indicators were validated in a validation set with 76 patients with BD, 30 healthy controls, 18 patients with Takayasu arteritis and 18 patients with ANCA-associated vasculitis. RESULTS: In this study, the variables identified were found to act in synergy rather than alone in BD patients under physiological, pathological and pharmacological conditions. Immunity and inflammation can be suppressed by corticosteroids and immunosuppressants, and integrative analysis of granulocytes, platelets and related variables is likely to provide a more comprehensive understanding of disease activity, thrombotic potential and ultimately potential tissue damage. We determined that total protein/mean corpuscular hemoglobin and total protein/mean corpuscular hemoglobin levels, total protein/mean corpuscular volume, and plateletcrit/monocyte counts were significantly increased in BD compared with controls (P < 0.05, in both the discovery and validation sets), which helped in distinguishing BD patients from healthy and vasculitis controls. Chronic anemia in BD combined with increased total protein contributed to higher levels of these biomarkers, and the interactions between platelets and monocytes may be linked to vascular involvement. CONCLUSIONS: All these results demonstrate the utility of our approach in elucidating the pathogenesis and in identifying novel biomarkers for autoimmune diseases in the future.

Multishock to Quasi-Isentropic Compression of Dense Gaseous Deuterium-Helium Mixtures up to 120 GPa: Probing the Sound Velocities Relevant to Planetary Interiors.

Shock reverberation compression experiments on dense gaseous deuterium-helium mixtures are carried out to provide thermodynamic parameters relevant to the conditions in planetary interiors. The multishock pressures are determined up to 120 GPa and reshock temperatures to 7400 K. Furthermore, the unique compression path from shock-adiabatic to quasi-isentropic compressions enables a direct estimation of the high-pressure sound velocities in the unexplored range of 50-120 GPa. The equation of state and sound velocity provide particular dual perspectives to validate the theoretical models. Our experimental data are found to agree with several equation of state models widely used in astrophysics within the probed pressure range. The current data improve the experimental constraints on sound velocities in the Jovian insulating-to-metallic transition layer.

Comprehensive Analyses of the Immunoglobulin Proteome for the Classification of Glomerular Diseases.

Glomerular diseases, which are currently diagnosed using an invasive renal biopsy, encompass numerous disease subtypes that often display similar clinical manifestations even though they have different therapeutic regimes. Therefore, a noninvasive assay is needed to classify and guide the treatment of glomerular diseases. Here, we develop and apply a high-throughput and quantitative microarray platform to characterize the immunoglobulin proteome in the serum from 419 healthy and diseased patients. The immunoglobulin proteome-clinical variable correlation network revealed novel pathological mechanisms of glomerular diseases. Furthermore, an immunoglobulin proteome-multivariate normal distribution (IP-MiND) mathematical model based on the correlation network classified healthy volunteers and patients with idiopathic membranous nephropathy with an average recall of 48% (23-80%) in the discovery cohort and 64% (63-65%) in an independent validation cohort. Our results demonstrate the translational utility of our microarray platform to glomerular diseases as well as its clinical potential in characterizing other human diseases.

Ab initio study of the miscibility for solid hydrogen-helium mixtures at high pressure.

Understanding the behavior of H2-He binary mixtures at high pressure is of great importance. Two more recent experiments [J. Lim and C. S. Yoo, Phys. Rev. Lett. 120, 165301 (2018) and R. Turnbull et al., ibid. 121, 195702 (2018)] are in conflict, regarding the miscibility between H2 and He in solids at high pressure. On the basis of first-principles calculations combined with the structure prediction method, we investigate the miscibility for solid H2-He mixtures at pressures from 0 GPa to 200 GPa. It is found that there is no sign of miscibility and chemical reactivity in H2-He mixtures with any H:He ratio. Moreover, instead of H2-He mixtures, the calculated Raman modes of the N-H mixtures can better explain the characteristic peaks observed experimentally, which were claimed to be the H-He vibrational modes. These calculation results are more in line with the experimental findings by Turnbull et al. [Phys. Rev. Lett. 121, 195702 (2018)].

Extremely Low Electron-ion Temperature Relaxation Rates in Warm Dense Hydrogen: Interplay between Quantum Electrons and Coupled Ions.

Theoretical and computational modeling of nonequilibrium processes in warm dense matter represents a significant challenge. The electron-ion relaxation process in warm dense hydrogen is investigated here by nonequilibrium molecular dynamics using the constrained electron force field (CEFF) method. CEFF evolves wave packets that incorporate dynamic quantum diffraction that obviates the Coulomb catastrophe. Predictions from this model reveal temperature relaxation times as much as three times longer than prior molecular dynamics results based on quantum statistical potentials. Through analyses of energy distributions and mean free paths, this result can be traced to delocalization. Finally, an improved GMS [Gericke, Murillo, and Schlanges, Phys. Rev. E 78, 025401 (2008)PRESCM1539-375510.1103/PhysRevE.78.025401] model is proposed, in which the Coulomb logarithms are in good agreement with CEFF results.

Erratum: Extremely Low Electron-ion Temperature Relaxation Rates in Warm Dense Hydrogen: Interplay between Quantum Electrons and Coupled Ions [Phys. Rev. Lett. 122, 015001 (2019)].

This corrects the article DOI: 10.1103/PhysRevLett.122.015001.

Achieving a direct band gap and high power conversion efficiency in an SbI3/BiI3 type-II vdW heterostructure via interlayer compression and electric field application.

Type-II van der Waals (vdW) heterostructures are considered as a class of competitive candidates of high-efficiency photovoltaic materials, due to their spontaneous electron-hole separation. However, most of the vdW heterostructures possess an indirect gap and a large band offset, which would lead to low photon-to-electron conversion efficiency. Taking an SbI3/BiI3 vdW heterostructure as an illustrative example, we propose interlayer compression and vertical electric field application as two effective strategies to modulate the electronic and photovoltaic properties of type-II vdW heterostructures. Our results reveal that a lattice-matched SbI3/BiI3 vdW heterostructure has an indirect band gap of 1.34 eV with the conduction band minimum (CBM) at the Γ point and the valence band maximum (VBM) between the Γ and M points. The power conversion efficiency (PCE) of an SbI3/BiI3-based excitonic solar cell (XSC) is predicted to be about 14.42%. When compressing the heterostructure along the vdW gap direction, the highest valence band state at the Γ point is lifted significantly and the VBM gradually approaches the Γ point, implying an indirect-direct gap transition. This interesting evolution can be attributed to the increasing k-dependent electronic hybridization of the pz orbitals of interlayer adjacent I atoms with a reduced interlayer distance. Moreover, the interlayer compression also enhances the PCE of the system monotonically. When applying a vertical electric field, the band alignment of the heterostructure undergoes a transition from type-II to type-I and then returns to type-II between 0.1 and 0.6 V Å-1. Meanwhile, the PCE of the SbI3/BiI3 XSC could be enhanced up to 21.63%. This work provides guidance for improving the electronic and photovoltaic properties of type-II vdW heterostructures.

Development of RBC Membrane Antigen Arrays for Validating Blood Grouping Reagents.

Antibody reagents have been remained as a standard approach to characterize blood group (BG) antigens in clinic. The specificity and cross-reactivity of these BG antibodies are routine detected using the gel microcolumn assay (GMA). However, the GMA is neither specific nor sensitive, thus increasing the risk of improperly matched RBC transfusions. In this work, we describe a bead-based RBC membrane antigen array to detect BG antibody-antigen binding with ∼700-fold higher sensitivity and dynamic range than the GMA. RBC membrane antigen arrays were fabricated using fragmented RBC membranes highly enriched in BG panel antigens. The arrays were then used to screen the interactions of 15 BG reagents to three antigen panels. The majority of the antibody reactions (i.e., 86.7%; 39/45) aligned with those obtained with the GMA. The six cross-reactive, nonspecific antibody reactions identified only by our arrays (i.e., 13.3%; 6/45) were confirmed by agglutination inhibition and genotyping assays. These results demonstrate that our RBC membrane antigen array has great potential in screening BG antibodies and improving the safety of RBC transfusions.

First-principles study on equation of states and electronic structures of shock compressed Ar up to warm dense regime.

The equation of states (EOS) and electronic structures of argon with temperatures from 0.02 eV to 3 eV and densities from 0.5 g/cm(3) to 5.5 g/cm(3) are calculated using the pair potential and many-body potential molecular dynamics and the density functional theory (DFT) molecular dynamics with van der Waals (vdW) corrections. First-principles molecular dynamics is implemented above 2.0 g/cm(3). For the cases of low densities below 3 g/cm(3), we performed pair potential molecular dynamics in order to obtain the ionic configurations, which are used in density functional theory to calculate the EOS and electronic structures. We checked the validity of different methods at different densities and temperatures, showing their behaviors by comparing EOS. DFT without vdW correction works well above 1 eV and 3.5 g/cm(3). Below 1 eV and 2.0 g/cm(3), it overestimates the pressure apparently and results in incorrect behaviors of the internal energy. With vdW corrections, the semi-empirical force-field correction (DFT-D2) method gives consistent results in the whole density and temperature region, and the vdW density functional (vdW-DF2) method gives good results below 2.5 g/cm(3), but it overestimates the pressure at higher densities. The interactions among the atoms are overestimated by the pair potential above 1 eV, and a temperature dependent scaled pair potential can be used to correct the ionic configurations of the pair potential up to 3 eV. The comparisons between our calculations and the experimental multi-shock compression results show that the Hugoniot line of DFT-D2 and DFT tends to give larger pressure than the results of the self-consistent fluid variational theory, and the difference increases with the density. The electronic energy gap exists for all our cases up to 5.5 g/cm(3) and 1 eV. The effect of vdW interactions on the electronic structures are also discussed.

Strength of bulk aluminum-boron alloys containing helium produced by 10B(n,α)7Li reaction in nuclear reactor.

The study of metals and alloys containing helium has garnered significant attention within the nuclear energy community. However, there is limited research on the mechanical behavior of bulk alloys implanted with helium. This study investigates the mechanical properties of several Al-Boron alloys implanted with helium using controlled manipulation of helium doses via boron content under a consistent neutron dose. Results show that HemVn may contribute to strength by approximately 8.4-15 MPa and 16.8-23 MPa for helium doses 3.08 × 1019/cm3 and 6.84 × 1019/cm3, respectively, while lattice damages due to neutron-aluminum reaction contribute to strength by 24∼27 MPa. Subsequent annealing leads to the formation of helium bubbles, resulting in a slightly higher strengthening effect compared to HemVn. Additionally, the work hardening behavior of the alloys can be explained by the Voce model, drawing inspiration from the resemblance between helium bubbles and nanoprecipitates in 7xxx alloys. These findings provide insights to the nuclear energy community.

Trunk-Inspired SWCNT-Based Wrinkled Films for Highly-Stretchable Electromagnetic Interference Shielding and Wearable Thermotherapy.

Nowadays, the increasing electromagnetic waves generated by wearable devices are becoming an emerging issue for human health, so stretchable electromagnetic interference (EMI) shielding materials are highly demanded. Elephant trunks are capable of grabbing fragile vegetation and tearing trees thanks not only to their muscles but also to their folded skins. Inspired by the wrinkled skin of the elephant trunks, herein, we propose a winkled conductive film based on single-walled carbon nanotubes (SWCNTs) for multifunctional EMI applications. The conductive film has a sandwich structure, which was prepared by coating SWCNTs on both sides of the stretched elastic latex cylindrical substrate. The shrinking-induced winkled conductive network could withstand up to 200% tensile strain. Typically, when the stretching direction is parallel to the polarization direction of the electric field, the total EMI shielding effectiveness could surprisingly increase from 38.4 to 52.7 dB at 200% tensile strain. It is mainly contributed by the increased connection of the SWCNTs. In addition, the film also has good Joule heating performance at several voltages, capable of releasing pains in injured joints. This unique property makes it possible for strain-adjustable multifunctional EMI shielding and wearable thermotherapy applications.

Strain-Induced Surface Interface Dual Polarization Constructs PML-Cu/Bi12O17Br2 High-Density Active Sites for CO2 Photoreduction.

The insufficient active sites and slow interfacial charge transfer of photocatalysts restrict the efficiency of CO2 photoreduction. The synchronized modulation of the above key issues is demanding and challenging. Herein, strain-induced strategy is developed to construct the Bi-O-bonded interface in Cu porphyrin-based monoatomic layer (PML-Cu) and Bi12O17Br2 (BOB), which triggers the surface interface dual polarization of PML-Cu/BOB (PBOB). In this multi-step polarization, the built-in electric field formed between the interfaces induces the electron transfer from conduction band (CB) of BOB to CB of PML-Cu and suppresses its reverse migration. Moreover, the surface polarization of PML-Cu further promotes the electron converge in Cu atoms. The introduction of PML-Cu endows a high density of dispersed Cu active sites on the surface of PBOB, significantly promoting the adsorption and activation of CO2 and CO desorption. The conversion rate of CO2 photoreduction to CO for PBOB can reach 584.3 µmol g-1, which is 7.83 times higher than BOB and 20.01 times than PML-Cu. This work offers valuable insights into multi-step polarization regulation and active site design for catalysts.

Theoretical evidence of H-He demixing under Jupiter and Saturn conditions.

The immiscibility of hydrogen-helium mixture under the temperature and pressure conditions of planetary interiors is crucial for understanding the structures of gas giant planets (e.g., Jupiter and Saturn). While the experimental probe at such extreme conditions is challenging, theoretical simulation is heavily relied in an effort to unravel the mixing behavior of hydrogen and helium. Here we develop a method via a machine learning accelerated molecular dynamics simulation to quantify the physical separation of hydrogen and helium under the conditions of planetary interiors. The immiscibility line achieved with the developed method yields substantially higher demixing temperatures at pressure above 1.5 Mbar than earlier theoretical data, but matches better to the experimental estimate. Our results suggest a possibility that H-He demixing takes place in a large fraction of the interior radii of Jupiter and Saturn, i.e., 27.5% in Jupiter and 48.3% in Saturn. This indication of an H-He immiscible layer hints at the formation of helium rain and offers a potential explanation for the decrease of helium in the atmospheres of Jupiter and Saturn.

Lattice Thermal Conductivity of Monolayer InSe Calculated by Machine Learning Potential.

The two-dimensional post-transition-metal chalcogenides, particularly indium selenide (InSe), exhibit salient carrier transport properties and evince extensive interest for broad applications. A comprehensive understanding of thermal transport is indispensable for thermal management. However, theoretical predictions on thermal transport in the InSe system are found in disagreement with experimental measurements. In this work, we utilize both the Green-Kubo approach with deep potential (GK-DP), together with the phonon Boltzmann transport equation with density functional theory (BTE-DFT) to investigate the thermal conductivity (κ) of InSe monolayer. The κ calculated by GK-DP is 9.52 W/mK at 300 K, which is in good agreement with the experimental value, while the κ predicted by BTE-DFT is 13.08 W/mK. After analyzing the scattering phase space and cumulative κ by mode-decomposed method, we found that, due to the large energy gap between lower and upper optical branches, the exclusion of four-phonon scattering in BTE-DFT underestimates the scattering phase space of lower optical branches due to large group velocities, and thus would overestimate their contribution to κ. The temperature dependence of κ calculated by GK-DP also demonstrates the effect of higher-order phonon scattering, especially at high temperatures. Our results emphasize the significant role of four-phonon scattering in InSe monolayer, suggesting that combining molecular dynamics with machine learning potential is an accurate and efficient approach to predict thermal transport.