RESUMEN
Droplet fusion technology is a key technology for many droplet-based biochemical medical applications. By integrating a symmetrical flow channel structure, we demonstrate an acoustics-controlled fusion method of microdroplets using surface acoustic waves. Different kinds of microdroplets can be staggered and ordered in the symmetrical flow channel, proving the good arrangement effect of the microfluidic chip. This method can realize not only the effective fusion of microbubbles but also the effective fusion of microdroplets of different sizes without any modification. Further, we investigate the influence of the input frequency and peak-to-peak value of the driving voltage on microdroplets fusion, giving the effective fusion parameter conditions of microdroplets. Finally, this method is successfully used in the preparation of hydrogel microspheres, offering a new platform for the synthesis of hydrogel microspheres.
Asunto(s)
Acústica , Hidrogeles , Microburbujas , Microesferas , Hidrogeles/síntesis química , Hidrogeles/química , MicrofluídicaRESUMEN
Hydrogel microstructures that encapsulate cells can be assembled into tissues and have broad applications in biology and medicine. However, 3D posture control for a single arbitrary microstructure remains a challenge. A novel 3D manipulation and assembly technique based on optothermally generated bubble robots is proposed. The generation, rate of growth, and motion of a microbubble robot can be controlled by modulating the power of a laser focused on the interface between the substrate and a fluid. In addition to 2D operations, bubble robots are able to perform 3D manipulations. The 3D properties of hydrogel microstructures are adjusted arbitrarily, and convex and concave structures with different heights are designed. Furthermore, annular micromodules are assembled into 3D constructs, including tubular and concentric constructs. A variety of hydrogel microstructures of different sizes and shapes are operated and assembled in both 2D and 3D conformations by bubble robots. The manipulation and assembly methods are simple, rapid, versatile, and can be used for fabricating tissue constructs.
RESUMEN
A 3D manipulation technique based on two optothermally generated and actuated surface-bubble robots is proposed. A single laser beam can be divided into two parallel beams and used for the generation and motion control of twin bubbles. The movement and spacing control of the lasers and bubbles can be varied directly and rapidly. Both 2D and 3D operations of micromodules were carried out successfully using twin bubble robots. The cooperative manipulation of twin bubble robots is superior to that of a single robot in terms of stability, speed, and efficiency. The operational technique proposed in this study is expected to play an important role in tissue engineering, drug screening, and other fields.
RESUMEN
Microrobots have emerged as powerful tools for manipulating particles, cells, and assembling biological tissue structures at the microscale. However, achieving precise and flexible operation of arbitrary-shaped microstructures in 3D space remains a challenge. In this study, three novel operation methods based on bubble microrobots are proposed to enable delicate and multifunctional manipulation of various microstructures. These methods include 3D turnover, fixed-point rotation, and 3D ejection. By harnessing the combined principles of the effect of the heat flow field and surface tension of an optothermally generated bubble, the bubble microrobot can perform tasks such as flipping an SIA humanoid structure, rotating a bird-like structure, and launching a hollow rocket-like structure. The proposed multi-mode operation of bubble microrobots enables diverse attitude adjustments of microstructures with different sizes and shapes in both 2D and 3D spaces. As a demonstration, a biological microenvironment of brain glioblastoma is constructed by the bubble microrobot. The simplicity, versatility, and flexibility of this proposed method hold great promise for applications in micromanipulation, assembly, and tissue engineering.
Asunto(s)
Robótica , Robótica/instrumentación , Humanos , Glioblastoma/patología , Ingeniería de Tejidos/métodos , Diseño de EquipoRESUMEN
In recent years, microbubbles have been widely used in the field of microrobots due to their unique properties. Microbubbles can be easily produced and used as power sources or tools of microrobots, and the bubbles can even serve as microrobots themselves. As a power source, bubbles can propel microrobots to swim in liquid under low-Reynolds-number conditions. As a manipulation tool, microbubbles can act as the micromanipulators of microrobots, allowing them to operate upon particles, cells, and organisms. As a microrobot, microbubbles can operate and assemble complex microparts in two- or three-dimensional spaces. This review provides a comprehensive overview of bubble applications in microrobotics including propulsion, micromanipulation, and microassembly. First, we introduce the diverse bubble generation and control methods. Then, we review and discuss how bubbles can play a role in microrobotics via three functions: propulsion, manipulation, and assembly. Finally, by highlighting the advantages and current challenges of this progress, we discuss the prospects of microbubbles in microrobotics.
RESUMEN
The specific spatial distribution of tissue generates a heterogeneous micromechanical environment that provides ideal conditions for diverse functions such as regeneration and angiogenesis. However, to manufacture microscale multicellular heterogeneous tissue modulesin vitroand then assemble them into specific functional units is still a challenging task. In this study, a novel method for the digital assembly of heterogeneous microtissue modules is proposed. This technique utilizes the flexibility of digital micromirror device-based optical projection lithography and the manipulability of bubble-based microrobots in a liquid environment. The results indicate that multicellular microstructures can be fabricated by increasing the inlets of the microfluidic chip. Upon altering the exposure time, the Young's modulus of the entire module and different regions of each module can be fine-tuned to mimic normal tissue. The surface morphology, mechanical properties, and internal structure of the constructed bionic peritoneum were similar to those of the real peritoneum. Overall, this work demonstrates the potential of this system to produce and control the posture of modules and simulate peritoneal metastasis using reconfigurable manipulation.
Asunto(s)
Microfluídica , ImpresiónRESUMEN
Industrial robots have been widely used for manufacturing and assembly in factories. However, at the microscale, most assembly technologies can only pattern the micromodules together loosely and can hardly combine the micromodules to directly form an entity that cannot be easily dispersed. In this study, surface bubbles are made to function as microrobots on a chip. These microrobots can move, fix, lift, and drop microparts and integratively assemble them into a tightly connected entity. As an example, the assembly of a pair of microparts with dovetails is considered. A jacklike bubble robot is used to lift and drop a micropart with a tail, whereas a mobile microrobot is used to push the other micropart with the corresponding socket to the proper position so that the tail can be inserted into the socket. The assembled microparts with the tail-socket joint can move as an entity without separation. Similarly, different types of parts are integratively assembled to form various structures such as gears, snake-shaped chains, and vehicles, which are then driven by bubble microrobots to perform different forms of movement. This assembly technology is simple and efficient and is expected to play an important role in micro-operation, modular assembly, and tissue engineering.