OLFM4, KNG1 and Sec24C identified by proteomics and immunohistochemistry as potential markers of early colorectal cancer stages.

BACKGROUND: Despite recent advances in colorectal cancer (CRC) diagnosis and population screening programs, the identification of patients with preneoplastic lesions or with early CRC stages remains challenging and is important for reducing CRC incidence and increasing patient's survival. METHODS: We analysed 76 colorectal tissue samples originated from early CRC stages, normal or inflamed mucosa by label-free proteomics. The characterisation of three selected biomarker candidates was performed by immunohistochemistry on an independent set of precancerous and cancerous lesions harbouring increasing CRC stages. RESULTS: Out of 5258 proteins identified, we obtained 561 proteins with a significant differential distribution among groups of patients and controls. KNG1, OLFM4 and Sec24C distributions were validated in tissues and showed different expression levels especially in the two early CRC stages compared to normal and preneoplastic tissues. CONCLUSION: We highlighted three proteins that require further investigations to better characterise their role in early CRC carcinogenesis and their potential as early CRC markers.

Biocompatible Polyion Complex Micelles Synthesized from Arborescent Polymers.

Water-dispersible polyion complex (PIC) micelles were prepared by the self-assembly of an arborescent polystyrene-graft-poly(2-vinylpyridine) copolymer (denoted G0PS-g-P2VP or G1) serving as core and a poly(acrylic acid)-block-poly(2-hydroxyethyl acrylate) (PAA-b-PHEA) double-hydrophilic block copolymer (DHBC) forming a shell. Varying the density of hydrophilic polymer chains in the stabilizing layer provided control over the size and structure of the entities obtained, from large flocculated species to stable isolated PIC micelles with diameters ranging from 42 to 67 nm. The hydrodynamic radius (determined from dynamic light scattering measurements), and the weight-average molar mass (M̅w) and radius of gyration of the scatterers (extracted from static multiangle light scattering data) evidenced the formation of either isolated or aggregated PIC micelles depending on the self-assembly conditions used (pH, concentration and mixing molar ratio f). Changes in the morphology of the arborescent copolymer after complexation were observed by atomic force microscopy (AFM) imaging. In particular, by varying the force applied with the AFM tip on the samples, the core-shell structure of the PIC micelles was clearly evidenced. The PIC micelles displayed no significant cytotoxicity toward mouse fibroblast L929 cells, a standard cell line recommended for toxicity assays, due to the good biocompatibility of the hydrophilic PAA-b-PHEA shell. In spite of a negative residual zeta potential due to an excess of negative charges, fluorescently labeled PIC* micelles were successfully internalized by L929 cells, as confirmed by laser scanning confocal microscopy (LSCM) and transmission electron microscopy (TEM).

Effects of Methylmercury on Harbour Seal Peripheral Blood Leucocytes In Vitro Studied by Electron Microscopy.

Methylmercury (MeHg) is highly immunotoxic and can alter the health status of the harbour seal, Phoca vitulina, from the North Sea. To investigate the mechanism of MeHg-induced toxicity in harbour seal lymphocytes, Concanavalin A (ConA)-stimulated peripheral blood leucocytes were exposed in vitro to sublethal concentrations of MeHgCl (0.2, 1, and 2 µM) for 72 h and then analysed for their viability and ultrastructure. After 72 h of incubation, cells were counted with a propidium iodide staining technique, a metabolic MTS assay was performed, and cells exposed to 1 µM of MeHgCl were observed by transmission electron microscopy (TEM). Alive cell numbers decreased with increased MeHgCl concentrations. In presence of ConA and 1 µM of MeHgCl, TEM images revealed a higher frequency of apoptotic cells. Exposed cells displayed condensation of the chromatin at the nuclear membrane and mitochondrial damages. The results suggest that in vitro MeHgCl-induced apoptosis in harbour seal lymphocytes through a mitochondrial pathway.

Gold nanorods coated with mesoporous silica shell as drug delivery system for remote near infrared light-activated release and potential phototherapy.

In this study, we report the synthesis of a nanoscaled drug delivery system, which is composed of a gold nanorod-like core and a mesoporous silica shell (GNR@MSNP) and partially uploaded with phase-changing molecules (1-tetradecanol, TD, T(m) 39 °C) as gatekeepers, as well as its ability to regulate the release of doxorubicin (DOX). Indeed, a nearly zero premature release is evidenced at physiological temperature (37 °C), whereas the DOX release is efficiently achieved at higher temperature not only upon external heating, but also via internal heating generated by the GNR core under near infrared irradiation. When tagged with folate moieties, GNR@MSNPs target specifically to KB cells, which are known to overexpress the folate receptors. Such a precise control over drug release, combining with the photothermal effect of GNR cores, provides promising opportunity for localized synergistic photothermal ablation and chemotherapy. Moreover, the performance in killing the targeted cancer cells is more efficient compared with the single phototherapeutic modality of GNR@MSNPs. This versatile combination of local heating, phototherapeutics, chemotherapeutics and gating components opens up the possibilities for designing multifunctional drug delivery systems.

Poly(2-oxazoline)-based nanogels as biocompatible pseudopolypeptide nanoparticles.

Hydrophilic nanogels based on partially hydrolyzed poly(2-ethyl-2-oxazoline) were synthesized in dilute aqueous media in the presence of 1,6-hexanediol diglycidyl ether as a cross-linker. Nanogel formation was monitored by DLS and HSQC NMR spectroscopy, and the final nano-objects were characterized by DLS, TEM, AFM, and NanoSight analyses. Nanogels with a hydrodynamic radius of 78 nm exhibiting a slight positive surface charge were obtained. MTS assays (cell metabolic activity test) evidenced that nanogels were nontoxic in the investigated concentration range (i.e., 0.1 to 400 µg/mL) and that no specific interaction with bovine serum albumin was observed.

Crystallisation-driven self-assembly of poly(2-isopropyl-2-oxazoline)-block-poly(2-methyl-2-oxazoline) above the LCST.

The solution behaviour in water of a polyoxazoline-type block copolymer, namely poly(2-isopropyl-2-oxazoline)-block-poly(2-methyl-2-oxazoline), denoted as P(iPrOx-b-MeOx), above the lower critical solution temperature (LCST) of the PiPrOx block was exploited to induce a temporary or permanent self-assembly. Spherical micelles were first obtained and could be disassembled in a reversible manner when kept for a short period of time (i.e. t < 90 min) above the LCST, and cooled down to room temperature. In contrast, annealing the copolymer solution for more than 90 min at 65 °C induced the crystallisation of the PiPrOx block, as evidenced by wide angle X-ray scattering (WAXS) experiments. This crystallisation-driven self-assembly phenomenon resulted in different morphologies, including spherical and distorted crystallised micelles and micron-size fibers, their relative proportion varies with the annealing time. Formation of micron-size range fiber-like structures might be explained by the re-organization of parent crystallised micelles. The crystal structure, as determined by WAXS, appeared to be identical to that of the PiPrOx homopolymer.

Selected protein monitoring in histological sections by targeted MALDI-FTICR in-source decay imaging.

Matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI MSI) is a rapidly growing method in biomedical research allowing molecular mapping of proteins on histological sections. The images can be analyzed in terms of spectral pattern to define regions of interest. However, the identification and the differential quantitative analysis of proteins require off line or in situ proteomic methods using enzymatic digestion. The rapid identification of biomarkers holds great promise for diagnostic research, but the major obstacle is the absence of a rapid and direct method to detect and identify with a sufficient dynamic range a set of specific biomarkers. In the current work, we present a proof of concept for a method allowing one to identify simultaneously a set of selected biomarkers on histological slices with minimal sample treatment using in-source decay (ISD) MSI and MALDI-Fourier transform ion cyclotron resonance (FTICR). In the proposed method, known biomarkers are spotted next to the tissue of interest, the whole MALDI plate being coated with 1,5-diaminonaphthalene (1,5-DAN) matrix. The latter enhances MALDI radical-induced ISD, providing large tags of the amino acid sequences. Comparative analysis of ISD fragments between the reference spots and the specimen in imaging mode allows for unambiguous identification of the selected biomarker while preserving full spatial resolution. Moreover, the high resolution/high mass accuracy provided by FTICR mass spectrometry allows the identification of proteins. Well-resolved peaks and precise measurements of masses and mass differences allow the construction of reliable sequence tags for protein identification. The method will allow the use of MALDI-FTICR MSI as a method for rapid targeted biomarker detection in complement to classical histology.

An analytical pipeline for MALDI in-source decay mass spectrometry imaging.

In-source decay (ISD) fragmentation as combined with matrix-assisted laser desorption/ionization (MALDI) mass spectrometry allows protein sequencing directly from mass spectra. Acquisition of MALDI-ISD mass spectra from tissue samples is achieved using an appropriate MALDI matrix, such as 1,5-diaminonaphthalene (DAN). Recent efforts have focused on combining MALDI-ISD with mass spectrometry imaging (MSI) to provide simultaneous sequencing and localization of proteins over a thin tissue surface. Successfully coupling these approaches requires the development of new data analysis tools, but first, investigating the properties of MALDI-ISD as applied to mixtures of protein standards reveals a high sensitivity to the relative protein ionization efficiency. This finding translates to the protein mixtures found in tissues and is used to inform the development of an analytical pipeline for data analysis in MALDI-ISD MS imaging, including software to identify the most pertinent spectra, to sequence protein mixtures, and to generate ion images for comparison with tissue morphology. The ability to simultaneously identify and localize proteins is demonstrated by using the analytical pipeline on three tissue sections from porcine eye lens, resulting in localizations for crystallins and cytochrome c. The variety of protein identifications provided by MALDI-ISD-MSI between tissue sections creates a discovery tool, and the analytical pipeline makes this process more efficient.

MALDI-in source decay applied to mass spectrometry imaging: a new tool for protein identification.

Matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) imaging is a powerful technique giving access to the distribution of a large range of biomolecules directly from a tissue section, allowing, for example, the discovery of new pathological biomarkers. Nevertheless, one main difficulty lies in the identification of the detected species, especially proteins. MALDI-in source decay (ISD) is used to fragment ions directly in the mass spectrometer ion source. This technique does not require any special sample treatment but only the use of a specific MALDI matrix such as 2,5-dihydroxybenzoic acid or 1,5-diaminonaphthalene. MALDI-ISD is generally employed on classical, purified samples, but here we demonstrate that ISD can also be performed directly on mixtures and on a tissue slice leading to fragment ions, allowing the identification of major proteins without any further treatment. On a porcine eye lens slice, de novo sequencing was even performed. Crystallins not yet referenced in databases were identified by sequence homology with other mammalian species. On a mouse brain slice, we demonstrate that results obtained with ISD are comparable and even better than those obtained with a classical in situ digestion.

Proteome alteration induced by hTERT transfection of human fibroblast cells.

BACKGROUND: Telomerase confers cellular immortality by elongating telomeres, thereby circumventing the Hayflick limit. Extended-life-span cells have been generated by transfection with the human telomerase reverse transcriptase (hTERT) gene. hTERT transfected cell lines may be of outstanding interest to monitor the effect of drugs targeting the telomerase activity. The incidence of hTERT gene transfection at the proteome level is a prerequisite to that purpose. The effect of the transfection has been studied on the proteome of human fibroblast (WI38). Cytosolic and nuclear fractions of WI38 cells, empty vector transfected WI38 (WI38-HPV) and hTERT WI38 cells were submitted to a 2D-DIGE (Two-Dimensional Differential In-Gel Electrophoresis) analysis. Only spots that had a similar abundance in WI38 and WI38-HPV, but were differentially expressed in WI38 hTERT were selected for MS identification. This method directly points to the proteins linked with the hTERT expression. Number of false positive differentially expressed proteins has been excluded by using control WI38-HPV cells. The proteome alteration induced by hTERT WI38 transfection should be taken into account in subsequent use of the cell line for anti-telomerase drugs evaluation. RESULTS: 2D-DIGE experiment shows that 57 spots out of 2246 are significantly differentially expressed in the cytosolic fraction due to hTERT transfection, and 38 were confidently identified. In the nuclear fraction, 44 spots out of 2172 were selected in the differential proteome analysis, and 14 were identified. The results show that, in addition to elongating telomeres, hTERT gene transfection has other physiological roles, among which an enhanced ER capacity and a potent cell protection against apoptosis. CONCLUSION: We show that the methodology reduces the complexity of the proteome analysis and highlights proteins implicated in other processes than telomere elongation. hTERT induced proteome changes suggest that telomerase expression enhances natural cell repair mechanisms and stress resistance probably required for long term resistance of immortalized cells. Thus, hTERT transfected cells can not be only consider as an immortal equivalent to parental cells but also as cells which are over-resistant to stresses. These findings are the prerequisite for any larger proteomics aiming to evaluate anti-telomerase drugs proteome alteration and thus therapeutics induced cell reactions.

Mercury immune toxicity in harbour seals: links to in vitro toxicity.

BACKGROUND: Mercury is known to bioaccumulate and to magnify in marine mammals, which is a cause of great concern in terms of their general health. In particular, the immune system is known to be susceptible to long-term mercury exposure. The aims of the present study were (1) to determine the mercury level in the blood of free-ranging harbour seals from the North Sea and (2) to examine the link between methylmercury in vitro exposure and immune functions using seal and human mitogen-stimulated peripheral blood mononuclear cells (T-lymphocytes). METHODS: Total mercury was analysed in the blood of 22 harbour seals. Peripheral blood mononuclear cells were isolated from seals (n = 11) and from humans (n = 9). Stimulated lymphocytes of both species were exposed to functional tests (proliferation, metabolic activity, radioactive precursor incorporation) under increasing doses of methylmercury (0.1 to 10 microM). The expression of cytokines (IL-2, IL-4 and TGF-beta) was investigated in seal lymphocytes by RT-PCR and by real time quantitative PCR (n = 5) at methylmercury concentrations of 0.2 and 1 microM. Finally, proteomics analysis was attempted on human lymphocytes (cytoplasmic fraction) in order to identify biochemical pathways of toxicity at concentration of 1 microM (n = 3). RESULTS: The results showed that the number of seal lymphocytes, viability, metabolic activity, DNA and RNA synthesis were reduced in vitro, suggesting deleterious effects of methylmercury concentrations naturally encountered in free-ranging seals. Similar results were found for human lymphocytes. Functional tests showed that a 1 microM concentration was the critical concentration above which lymphocyte activity, proliferation and survival were compromised. The expression of IL-2 and TGF-beta mRNA was weaker in exposed seal lymphocytes compared to control cells (0.2 and 1 microM). Proteomics showed some variation in the protein expression profile (e.g. vimentin). CONCLUSION: Our results suggest that seal and human PBMCs react in a comparable way to MeHg in vitro exposure with, however, larger inter-individual variations. MeHg could be an additional cofactor in the immunosuppressive pollutant cocktail generally described in the blood of seals and this therefore raises the possibility of additional additive effects in the marine mammal immune system.

Magnetic Polyion Complex Micelles for Cell Toxicity Induced by Radiofrequency Magnetic Field Hyperthermia.

Magnetic nanoparticles (MNPs) of magnetite (Fe3O4) were prepared using a polystyrene-graft-poly(2-vinylpyridine) copolymer (denoted G0PS-g-P2VP or G1) as template. These MNPs were subjected to self-assembly with a poly(acrylic acid)-block-poly(2-hydroxyethyl acrylate) double-hydrophilic block copolymer (DHBC), PAA-b-PHEA, to form water-dispersible magnetic polyion complex (MPIC) micelles. Large Fe3O4 crystallites were visualized by transmission electron microscopy (TEM) and magnetic suspensions of MPIC micelles exhibited improved colloidal stability in aqueous environments over a wide pH and ionic strength range. Biological cells incubated for 48 h with MPIC micelles at the highest concentration (1250 µg of Fe3O4 per mL) had a cell viability of 91%, as compared with 51% when incubated with bare (unprotected) MNPs. Cell internalization, visualized by confocal laser scanning microscopy (CLSM) and TEM, exhibited strong dependence on the MPIC micelle concentration and incubation time, as also evidenced by fluorescence-activated cell sorting (FACS). The usefulness of MPIC micelles for cellular radiofrequency magnetic field hyperthermia (MFH) was also confirmed, as the MPIC micelles showed a dual dose-dependent effect (concentration and duration of magnetic field exposure) on the viability of L929 mouse fibroblasts and U87 human glioblastoma epithelial cells.

Atmospheric Plasma Deposition of Methacrylate Layers Containing Catechol/Quinone Groups: An Alternative to Polydopamine Bioconjugation for Biomedical Applications.

Bioconjugation of enzymes on coatings based on polydopamine (PDA) layers is an appealing approach to control biological responses on biomedical implant surfaces. As alternative to PDA wet deposition, a fast, solvent-free, and dynamic deposition approach based on atmospheric-pressure plasma dielectric barrier discharge process is considered to deposit on metallic surfaces acrylic-based interlayers containing highly chemically reactive catechol/quinone groups. A biomimetic approach based on covalent immobilization of Dispersin B, an enzyme with antibiofilm properties, shows the bioconjugation potential of the novel plasma polymer layers. The excellent antibiofilm activity against Staphylococcus epidermidis is comparable to the PDA-based layers prepared by wet chemical methods with slow deposition rates. A study of preosteoblastic MG-63 human cell line viability and adhesion properties on plasma polymer layers demonstrates early interaction required for biomedical applications.

Apoptosis and cytolysis induced by giganteosides and hederacolchisides in HL-60 cells.

UNLABELLED: The viability, cytolysis and apoptosis-mediated cellular death induced by giganteosides D and E (Gig-D and Gig-E) and hederacolchisides A and A1 (Hcol-A and Hcol-A1) were analysed in HL-60 cells. MATERIALS AND METHODS: The end-point metabolic (WST1) and lactate dehydrogenase (LDH) assays were used. Cell cycle analysis and apoptosis were measured by flow cytometry, DNA laddering and caspase-3 analyses. RESULTS: the HL-60 cell line was more sensitive to Hcol-A1 and Gig-D (IC50 3-5 microM) than to Gig-E and Hcol-A (IC50 8-13 microM; WST1 assay). This was related to LDH release. The induction of apoptosis could be detected without caspase-3 activation after 24 h of treatment. DNA fragmentation could be detected only with Gig-D. With Hcol-A1 and Gig-D, an accumulation of cells in the S-phase and an increase of cells in sub-G1 peak were observed. By the annexinV-fluorescein isothiocyanate (FITC)/7-amino-actinomycin D (AAD) assay, the majority of cells were in late apoptosis with Gig-D, and in necrosis with Hcol-A1. CONCLUSION: Hcol-A1 is more cytotoxic than Gig-D, followed by Gig-E and finally Hcol-A. This is related to a membrane permeabilization effect, leading to cytolysis.

Biocompatibility of polymer-infiltrated-ceramic-network (PICN) materials with Human Gingival Keratinocytes (HGKs).

OBJECTIVE: Biocompatibility of polymer-infiltrated-ceramic-network (PICN) materials, a new class of CAD-CAM composites, is poorly explored in the literature, in particular, no data are available regarding Human Gingival Keratinocytes (HGK). The first objective of this study was to evaluate the in vitro biocompatibility of PICNs with HGKs in comparison with other materials typically used for implant prostheses. The second objective was to correlate results with PICN monomer release and indirect cytotoxicity. METHODS: HGK attachment, proliferation and spreading on PICN, grade V titanium (Ti), yttrium zirconia (Zi), lithium disilicate glass-ceramic (eM) and polytetrafluoroethylene (negative control) discs were evaluated using a specific insert-based culture system. For PICN and eM samples, monomer release in the culture medium was quantified by high performance liquid chromatography and indirect cytotoxicity tests were performed. RESULTS: Ti and Zi exhibited the best results regarding HGK viability, number and coverage. eM showed inferior results while PICN showed statistically similar results to eM but also to Ti regarding cell number and to Ti and Zi regarding cell viability. No monomer release from PICN discs was found, nor indirect cytotoxicity, as for eM. SIGNIFICANCE: The results confirmed the excellent behavior of Ti and Zi with gingival cells. Even if polymer based, PICN materials exhibited intermediate results between Ti-Zi and eM. These promising results could notably be explained by PICN high temperature-high pressure (HT-HP) innovative polymerization mode, as confirmed by the absence of monomer release and indirect cytotoxicity.

Photoreversibility and Biocompatibility of Polydimethylsiloxane-Coumarin as Adjustable Intraocular Lens Material.

Polydimethylsiloxane (PDMS) constitutes an interesting material for a variety of biomedical applications, especially as intraocular lenses (IOLs), for its excellent transparency. In this work, a photoreversible PDMS-coumarin network, whose shape and properties can be adjusted postoperatively in a noninvasive manner, is developed. The synthesis of PDMS-coumarin is achieved by amidation of a coumarin acid chloride derivative with amine-functionalized PDMSs. Under exposure of λ > 300 nm, these polymers can be cured by dimerization of coumarin. The cured polymers can be uncrosslinked via photocleavage of cyclobutane dimers upon illumination at λ < 290 nm. The diffusion of linear PDMSs in a crosslinked network and the controlled shape modification are studied, which demonstrate that these polymers are good candidates for adjustable IOL application. IOL disks prepared from these materials show high hydrophobicity and good transparency. In vitro cytotoxicity, lens epithelial cell adhesion assays, and rabbit host reaction against implanted disks demonstrate the biocompatibility of the polymer.

Biocompatibility of polymer-infiltrated-ceramic-network (PICN) materials with Human Gingival Fibroblasts (HGFs).

OBJECTIVES: Polymer-infiltrated-ceramic-network (PICN) materials constitute an innovative class of CAD-CAM materials offering promising perspectives in prosthodontics, but no data are available in the literature regarding their biological properties. The objective of the present study was to evaluate the in vitro biocompatibility of PICNs with human gingival fibroblasts (HGFs) in comparison with materials typically used for implant prostheses and abutments. METHODS: HGF attachment, proliferation and spreading on discs made of PICN, grade V titanium (Ti), yttrium zirconia (Zi), lithium disilicate glass-ceramic (eM) and polytetrafluoroethylene (negative control), were evaluated using a specific insert-based culture system (IBS-R). Sample surface properties were characterized by XPS, contact angle measurement, profilometry and SEM. RESULTS: Ti and Zi gave the best results regarding HGF viability, morphology, number and coverage increase with time in comparison with the negative control, while PICN and eM gave intermediate results, cell spreading being comparable for PICN, Ti, Zi and eM. Despite the presence of polymers and their related hydrophobicity, PICN exhibited comparable results to glass-ceramic materials, which could be explained by the mode of polymerization of the monomers. SIGNIFICANCE: The results of the present study confirm that the currently employed materials, i.e. Ti and Zi, can be considered to be the gold standard of materials in terms of HGF behavior, while PICN gave intermediate results comparable to eM. The impact of the present in vitro results needs to be further investigated clinically, particularly in the view of the utilization of PICNs for prostheses on bone-level implants.

A new method using insert-based systems (IBS) to improve cell behavior study on flexible and rigid biomaterials.

In vitro studies about biomaterials biological properties are essential screening tests. Yet cell cultures encounter difficulties related to cell retention on material surface or to the observation of both faces of permeable materials. The objective of the present study was to develop a reliable in vitro method to study cell behavior on rigid and flexible/permeable biomaterials elaborating two specific insert-based systems (IBS-R and IBS-F respectively). IBS-R was designed as a specific cylindrical polytetrafluoroethylene (PTFE) system to evaluate attachment, proliferation and morphology of human gingival fibroblasts (HGFs) on grade V titanium and lithium disilicate glass-ceramic discs characteristics of dental prostheses. The number of cells, their covering on discs and their morphology were determined from MTS assays and microscopic fluorescent images after 24, 48 and 72 h. IBS-F was developed as a two components system to study HGFs behavior on guided bone regeneration polyester membranes. The viability and the membrane barrier effect were evaluated by metabolic MTS assays and by scanning electron microscopy. IBS-R and IBS-F were shown to promote (1) easy and rapid handling; (2) cell retention on biomaterial surface; (3) accurate evaluation of the cellular proliferation, spreading and viability; (4) use of non-toxic material. Moreover IBS-F allowed the study of the cell migration through degradable membranes, with an access to both faces of the biomaterial and to the bottom of culture wells for medium changing.

Absence of selenium protection against methylmercury toxicity in harbour seal leucocytes in vitro.

Previous studies described high concentrations of mercury (Hg) and selenium (Se) in the blood of harbour seals, Phoca vitulina from the North Sea. In the present study, we evaluated the in vitro potential protective effects of sodium selenite (Na2SeO3) and selenomethionine (SeMet) on cell proliferation of harbour seal lymphocytes exposed to MeHgCl 0.75µM. In vitro exposure of ConA-stimulated T lymphocytes resulted in severe inhibition of DNA synthesis, likely linked to severe loss of mitochondrial membrane potential at 0.75µM. Neither selenite nor SeMet showed a protective effect against MeHg toxicity expressed at the T lymphocyte proliferation level for harbour seals. Selenite and SeMet did not show negative effects regarding lymphocyte proliferation and mitochondrial membrane potential. To conclude, our results clearly demonstrated that MeHg affected in vitro immune cells exposure with no protective effects of selenium at a molar ratio Hg:Se of 1:10 in harbour seals from the North Sea.

Evaluation of a class of polyurethane materials for intraocular lens manufacturing.

Ophthalmic lenses are medical devices with considerable requirements in terms of optical, biomechanical and biological performance. There is limited number of materials used for their manufacturing, comprising mainly silicones and poly(meth)acrylates. This series of publications aims at investigating the applicability of thermoplastic polyurethane elastomers (TPU) for the manufacturing of ophthalmic lenses and examining the properties of the respective devices. This study is related to the synthesis of TPUs with chemical compositions that comprise chemically grafted filters for the hazardous-light. GC-MS, attenuated total reflectance Fourier transform infrared spectroscopy, and UV-vis spectroscopies confirmed the reaction completion and the beneficial effect of the filters on the light transmittance, respectively. Relatively high refractive index of the material was measured and allows for the manufacturing of thinner lenses. The contrast sensitivity determined for a model intraocular lens (IOL) was satisfactory. Few optical defects were, however, present on the model lens prepared by thermoplastic injection molding. The elasticity of the materials was evaluated in view to their potential applicability as foldable IOLs by determining their glass transition temperature and their Young modulus and measuring their shore A. The TPU materials demonstrated more bioadhesive character compared with a benchmark hydrophilic acrylic reference material, which is already used for IOL manufacturing.