π-Bonding of Group 11 Metals to a Tantalum Alkylidyne Alkyl Complex Promotes Unusual Tautomerism to Bis-alkylidene and CO2 to Ketenyl Transformation.

A salt metathesis synthetic strategy is used to access rare tantalum/coinage metal (Cu, Ag, Au) heterobimetallic complexes. Specifically, complex [Li(THF)2][Ta(CtBu)(CH2tBu)3], 1, reacts with (IPr)MCl (M = Cu, Ag, Au, IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) to afford the alkylidyne-bridged species [Ta(CH2tBu)3(µ-CtBu)M(IPr)] 2-M. Interestingly, π-bonding of group 11 metals to the Ta─C moiety promotes a rare alkylidyne alkyl to bis-alkylidene tautomerism, in which compounds 2-M are in equilibrium with [Ta(CHtBu)(CH2tBu)2(µ-CHtBu)M(IPr)] 3-M. This equilibrium was studied in detail using NMR spectroscopy and computational studies. This reveals that the equilibrium position is strongly dependent on the nature of the coinage metal going down the group 11 triad, thus offering a new valuable avenue for controlling this phenomenon. Furthermore, we show that these uncommon bimetallic couples could open attractive opportunities for synergistic reactivity. We notably report an uncommon deoxygenative carbyne transfer to CO2 resulting in rare examples of coinage metal ketenyl species, (tBuCCO)M(IPr), 4-M (M = Cu, Ag, Au). In the case of the Ta/Li analogue 1, the bis(alkylidene) tautomer is not detected, and the reaction with CO2 does not cleanly yield ketenyl species, which highlights the pivotal role played by the coinage metal partner in controlling these unconventional reactions.

Probing Basal and Prismatic Planes of Graphitic Materials for Metal Single Atom and Subnanometer Cluster Stabilization.

Supported metal single atom catalysis is a dynamic research area in catalysis science combining the advantages of homogeneous and heterogeneous catalysis. Understanding the interactions between metal single atoms and the support constitutes a challenge facing the development of such catalysts, since these interactions are essential in optimizing the catalytic performance. For conventional carbon supports, two types of surfaces can contribute to single atom stabilization: the basal planes and the prismatic surface; both of which can be decorated by defects and surface oxygen groups. To date, most studies on carbon-supported single atom catalysts focused on nitrogen-doped carbons, which, unlike classic carbon materials, have a fairly well-defined chemical environment. Herein we report the synthesis, characterization and modeling of rhodium single atom catalysts supported on carbon materials presenting distinct concentrations of surface oxygen groups and basal/prismatic surface area. The influence of these parameters on the speciation of the Rh species, their coordination and ultimately on their catalytic performance in hydrogenation and hydroformylation reactions is analyzed. The results obtained show that catalysis itself is an interesting tool for the fine characterization of these materials, for which the detection of small quantities of metal clusters remains a challenge, even when combining several cutting-edge analytical methods.

Planar Tetranuclear Uranium Hydride Cluster Supported by ansa-Bis(cyclopentadienyl) Ligands.

Polynuclear metal hydride clusters play important roles in various catalytic processes, with most of the reported polynuclear metal hydride clusters adopting a polyhedral three-dimensional structure. Herein, we report the first example of a planar tetranuclear uranium hydride cluster [(CpCMe2CMe2Cp)U]4(µ2-H)4(µ3-H)4 (U4H8). It was synthesized by reacting an ansa-bis(cyclopentadienyl) ligand-supported uranium chloride precursor [(CpCMe2CMe2Cp)U]3(µ2-Cl)3(µ3-Cl)2 with NaHBEt3. The presence of hydrides in U4H8 was confirmed by NMR spectroscopy and its reactivity with phenol and carbon tetrachloride. DFT calculations also facilitated the determination of the hydrides' positions in U4H8, featuring four bridging µ2-H ligands and four face-capping µ3-H ligands, with the four U centers arranged in a rhombic geometry. The U4H8 represents not only the first example of planar polynuclear actinide metal hydride cluster but also the uranium hydride cluster with the highest nuclearity reported to date.

Oxidative Addition of E-H (E=C, N) Bonds to Transient Uranium(II) Centers.

Two-electron oxidative addition is one of the most important elementary reactions for d-block transition metals but it is uncommon for f-block elements. Here, we report the first examples of intermolecular oxidative addition of E-H (E=C, N) bonds to uranium(II) centers. The transient U(II) species was formed in-situ by reducing a heterometallic cluster featuring U(IV)-Pd(0) bonds with potassium-graphite (KC8). Oxidative addition of C-H or N-H bonds to the U(II) centers was observed when this transient U(II) species was treated with benzene, carbazole or 1-adamantylamine, respectively. The U(II) centers could also react with tetracene, biphenylene or N2O, leading to the formation of arene reduced U(IV) products and uranyl(VI) species via two- or four-electron processes. This study demonstrates that the intermolecular two-electron oxidative addition reactions are viable for actinide elements.

Multimetallic Uranium Nitride Cubane Clusters from Dinitrogen Cleavage.

Dinitrogen cleavage provides an attractive but poorly studied route to the assembly of multimetallic nitride clusters. Here, we show that the monoelectron reduction of the dinitrogen complex [{U(OC6H2-But3-2,4,6)3}2(µ-η2:η2-N2)], 1, allows us to generate, for the first time, a uranium complex presenting a rare triply reduced N2 moiety ((µ-η2:η2-N2)•3-). Importantly, the bound dinitrogen can be further reduced, affording the U4N4 cubane cluster, 3, and the U6N6 edge-shared cubane cluster, 4, thus showing that (N2)•3- can be an intermediate in nitride formation. The tetranitride cluster showed high reactivity with electrophiles, yielding ammonia quantitatively upon acid addition and promoting CO cleavage to yield quantitative conversion of nitride into cyanide. These results show that dinitrogen reduction provides a versatile route for the assembly of large highly reactive nitride clusters, with U6N6 providing the first example of a molecular nitride of any metal formed from a complete cleavage of three N2 molecules.

1,2-Palladasilacyclobutene: The Missing Link in the Pd-Catalyzed Annulation of Alkynes for the Silirene-to-Silole Transformation.

The palladium-catalyzed annulation reaction of alkynes enables an attractive approach to siloles. Their access from silirenes and terminal alkynes proved rather general, involving reactive intermediates that have remained elusive to date. Starting from 1,2-bis(3-thienyl)silirene as a source of photochromic siloles, the mechanism of the annulation reaction has been revisited, and palladasilacyclobutenes resulting from the activation of the silirene could be isolated and thoroughly characterized (NMR, X-ray, and DFT). Their role as reactive intermediates and their fate in the course of the reaction were also studied in situ. In combination with in-depth DFT calculations, a clearer picture of the mechanism and the reactive key species is disclosed.

Monodentate Alkoxy/Aryloxy Anchored Yttrium Dihydrides; Anticipated Outcomes and Surprises.

The synthesis, characterization, and solid-state structure of bulky alkoxy- and aryloxy-supported yttrium polynuclear hydrides are reported. Hydrogenolysis of the supertrityl alkoxy anchored yttrium dialkyl, Y(OTr*)(CH2SiMe3)2(THF)2 (1) (Tr* = tris(3,5-di-tert-butylphenyl)methyl), resulted in the clean conversion to the tetranuclear dihydride, [Y(OTr*)H2(THF)]4 (1a). X-ray analysis revealed a highly symmetrical structure (4̅ site symmetry) with the four Y atoms located on the corners of a compressed tetrahedron, each bonded to an OTr* and tetrahydrofuran (THF) ligand and the cluster held together by four face-capping, µ3-H, and four edge-bridging, µ2-H, hydrides. DFT calculations on the full system with and without THF, but also on model systems, clearly show that the structural preference for complex 1a is controlled by the presence and coordination of THF molecules. Contrary to the exclusive formation of the tetranuclear dihydride, hydrogenolysis of the bulky aryloxy yttrium dialkyl, Y(OAr*)(CH2SiMe3)2(THF)2 (2) (Ar* = 3,5-di-tert-butylphenyl) gave a mixture of the analogous tetranuclear 2a and trinuclear, [Y3(OAr*)4H5(THF)4], polyhydride, 2b. Similar results, i.e., a mixture of tetra-/tri-nuclear products, were obtained from hydrogenolysis of the even bulkier Y(OArAd2,Me)(CH2SiMe3)2(THF)2 compound. Experimental conditions were established to optimize the production of either the tetra- or trinuclear products. X-ray structure of 2b revealed a triangular array of three yttrium atoms with two face-capping µ3-H and three edge-bridging µ2-H hydrides, with one yttrium bonded to two aryloxy ligands while the other two have a complement of one aryloxy and two THF ligands; the solid-state structure is close to being C2 symmetric, with the C2 axis running through the unique Y and unique µ2-H hydride. As opposed to 2a, which shows distinct 1H NMR resonances for µ3/ µ2-H (δ = 5.83/6.35 ppm, respectively), no hydride signals for 2b were observed at room temperature, indicating hydride exchange on the NMR time scale. Their presence and assignment were secured at -40 °C from 1H SST (spin saturation) experiment.

Synthesis and Reactivity of a Zinc Diazoalkyl Complex: [3+2] Cycloaddition Reaction with Carbon Monoxide.

This work reports the synthesis, characterization, and reactivity of the first example of a well-defined zinc α-diazoalkyl complex. Treatment of zinc(I)-zinc(I) bonded compound L2 Zn2 [L=CH3 C(2,6-i Pr2 C6 H3 N)CHC(CH3 )(NCH2 CH2 PPh2 )] or zinc(II) hydride LZnH with trimethylsilyldiazomethane affords zinc diazoalkyl complex LZnC(N2 )SiMe3 . This complex liberates N2 in the presence of a nickel catalyst to form an α-zincated phosphorus ylide by reacting with the pendant phosphine. It selectively undergoes formal [3+2] cycloaddition with CO2 or CO to form the corresponding product with a five-membered heterocyclic core. Notably, the use of CO in such a [3+2] cycloaddition reaction is unprecedented, reflecting a novel CO reaction mode.

An Experimental and Computational Investigation Rules Out Direct Nucleophilic Addition on the N2 Ligand in Manganese Dinitrogen Complex [Cp(CO)2 Mn(N2 )].

We have re-examined the reactivity of the manganese dinitrogen complex [Cp(CO)2 Mn(N2 )] (1, Cp=η5 -cyclopentadienyl, C5 H5 ) with phenylithium (PhLi). By combining experiment and density functional theory (DFT), we have found that, unlike previously reported, the direct nucleophilic attack of the carbanion onto coordinated dinitrogen does not occur. Instead, PhLi reacts with one of the CO ligands to provide an anionic acylcarbonyl dinitrogen metallate [Cp(CO)(N2 )MnCOPh]Li (3) that is stable only below -40 °C. Full characterization of 3 (including single crystal X-ray diffraction) was performed. This complex decomposes quickly above -20 °C with N2 loss to give a phenylate complex [Cp(CO)2 MnPh]Li (2). The latter compound was erroneously formulated as an anionic diazenido compound [Cp(CO)2 MnN(Ph)=N]Li in earlier reports, ruling out the claimed and so-far unique behavior of the N2 ligand in 1. DFT calculations were run to explore both the hypothesized and the experimentally verified reactivity of 1 with PhLi and are fully consistent with our results. Direct attack of a nucleophile on metal-coordinated N2 remains to be demonstrated.

Magnesium(I) Reduction of Aluminum(III) Hydride Complexes: Generation of Mixed Valence Aluminum (AlI /Al0 ) Hydride Cluster Compounds, [Al6 H8 (NR3 )2 {Mg(ß-diketiminate)}4 ].

Reduction of a range of amido- and aryloxy-aluminum dihydride complexes, e.g. [AlH2 (NR3 ){N(SiMe3 )2 }] (NR3 =NMe3 or N-methylpiperidine (NMP)), with ß-diketiminato dimagnesium(I) reagents, [{(Ar Nacnac)Mg}2 ] (Ar Nacnac=[HC(MeCNAr)2 ]- , Ar=mesityl (Mes) or 2,6-xylyl (Xyl)), have afforded deep red mixed valence aluminum hydride cluster compounds, [Al6 H8 (NR3 )2 {Mg(Ar Nacnac)}4 ], which have an average Al oxidation state of +0.66, the lowest for any well-defined aluminum hydride compound. In the solid-state, the clusters are shown to have distorted octahedral Al6 cores, having zero-valent Al axial sites and mono-valent AlH2 - equatorial units. Several novel by-products were isolated from the reactions that gave the clusters, including the Mg-Al bonded magnesio-aluminate complexes, [(Ar Nacnac)(Me3 N)Mg-Al(µ-H)3 [{Mg(Ar Nacnac)}2 (µ-H)]]. Computational analyses of one aluminum hydride cluster revealed its Al6 core to be electronically delocalized, and to possess one unoccupied, and six occupied, skeletal molecular orbitals.

A Masked Form of an O-Borylated Breslow Intermediate for the Diastereoselective FLP-Type Activation of Aldehydes.

Breslow intermediates are very often elusive species whose application in frustrated Lewis pair (FLP) chemistry is unprecedented. Described herein is the use of a masked form of an O-borylated Breslow (OBB) intermediate that performs FLP-type activation of the carbonyl function of five different benzaldehyde derivatives with complete diastereoselectivity. The resulting compounds are characterised in solution by NMR spectroscopy (compounds 4-8) and in solid state by X-ray diffraction analysis (compounds 4-6). A combined kinetic and theoretical investigation reveals the associative nature of the rate determining step and suggests that the OBB intermediate part is never released during the whole process.

Synthesis and Reactivity of Triangular Heterometallic Complexes Containing Zn-Zn Bond.

This work provides a facile access to a series of triangular [Zn2M] (M = group 10 and 11 metals) clusters. Treatment of Zn-Zn-bonded compounds [LZn-ZnL] (L = CH3C(2,6-iPr2C6H3N)CHC(CH3)(NCH2CH2PR2); R = Ph, iPr) with zero-valent transition-metal reagents selectively afforded the corresponding triangular clusters [Zn2M], where M = Ni(0), Pd(0), and Pt(0). Notably, the isoelectronic triangular clusters [Zn2M]+, where M = Ag(I) and Cu(I), could also be obtained by reactions of [LZn-ZnL] with AgOTf and CuOTf, respectively. The [Zn2Ag]+ complex containing elusive Zn-Ag bonds was investigated by density functional theory analysis, showing a 3c-2e bonding feature in the metallic ring. The electrochemical behaviors of [Zn2M] complexes were examined and revealed the donation of electron density from the Zn-Zn σ-bond to the metal centers. Reaction of the [Zn2Ni] complex with isocyanide gave heterometallic species by coordination of isocyanide to the nickel center, keeping the trimetallic ring core structure intact. In contrast, the Zn-Zn bond was rapidly cleaved upon treatment of the [Zn2Ni] complex with dihydrogen or phenyl acetylene, generating the hydride- or acetylide-bridged heterotrimetallic complex.

Rational Preparation of Well-Defined Multinuclear Iridium-Aluminum Polyhydride Clusters and Comparative Reactivity.

We report an original alkane elimination approach, entailing the protonolysis of triisobutylaluminum by the acidic hydrides from Cp*IrH4. This strategy allows access to a series of well-defined tri- and tetranuclear iridium aluminum polyhydride clusters, depending on the stoichiometry: [Cp*IrH3Al(iBu)2]2 (1), [Cp*IrH2Al(iBu)]2 (2), [(Cp*IrH3)2Al(iBu)] (3), and [(Cp*IrH3)3Al] (4). Contrary to most transition-metal aluminohydride complexes, which can be considered as [AlHx+3]x- aluminates and LnM+ moieties, the situation here is reversed: These complexes have original structures that are best described as [Cp*IrHx]n- iridate units surrounding cationic Al(III) fragments. This is corroborated by reactivity studies, which show that the hydrides are always retained at the iridium sites and that the [Cp*IrH3]- moieties are labile and can be transmetalated to yield potassium ([KIrCp*H3], 8) or silver (([AgIrCp*H3]n, 10) derivatives of potential synthetic interest. DFT calculations show that the bonding situation can vary in these systems, from 3-center 2-electron hydride-bridged Lewis adducts of the form Ir-H⇀Al to direct polarized metal-metal interaction from donation of d-electrons of Ir to the Al metal, and both types of interactions take place to some extent in each of these clusters.

Strongly Polarized Iridiumδ--Aluminumδ+ Pairs: Unconventional Reactivity Patterns Including CO2 Cooperative Reductive Cleavage.

The iridium tetrahydride complex Cp*IrH4 reacts with a range of isobutylaluminum derivatives of general formula Al(iBu)x(OAr)3-x (x = 1, 2) to give the unusual iridium aluminum species [Cp*IrH3Al(iBu)(OAr)] (1) via a reductive elimination route. The Lewis acidity of the Al atom in complex 1 is confirmed by the coordination of pyridine, leading to the adduct [Cp*IrH3Al(iBu)(OAr)(Py)] (2). Spectroscopic, crystallographic, and computational data support the description of these heterobimetallic complexes 1 and 2 as featuring strongly polarized Al(III)δ+-Ir(III)δ- interactions. Reactivity studies demonstrate that the binding of a Lewis base to Al does not quench the reactivity of the Ir-Al motif and that both species 1 and 2 promote the cooperative reductive cleavage of a range of heteroallenes. Specifically, complex 2 promotes the decarbonylation of CO2 and AdNCO, leading to CO (trapped as Cp*IrH2(CO)) and the alkylaluminum oxo ([(iBu)(OAr)Al(Py)]2(µ-O) (3)) and ureate ({Al(OAr)(iBu)[κ2-(N,O)AdNC(O)NHAd]} (4)) species, respectively. The bridged amidinate species Cp*IrH2(µ-CyNC(H)NCy)Al(iBu)(OAr) (5) is formed in the reaction of 2 with dicyclohexylcarbodiimine. Mechanistic investigations via DFT support cooperative heterobimetallic bond activation processes.

A Uranium(II) Arene Complex That Acts as a Uranium(I) Synthon.

Two-electron reduction of the amidate-supported U(III) mono(arene) complex U(TDA)3 (2) with KC8 yields the anionic bis(arene) complex [K[2.2.2]cryptand][U(TDA)2] (3) (TDA = N-(2,6-di-isopropylphenyl)pivalamido). EPR spectroscopy, magnetic susceptibility measurements, and calculations using DFT as well as multireference CASSCF methods all provide strong evidence that the electronic structure of 3 is best represented as a 5f4 U(II) metal center bound to a monoreduced arene ligand. Reactivity studies show 3 reacts as a U(I) synthon by behaving as a two-electron reductant toward I2 to form the dinuclear U(III)-U(III) triiodide species [K[2.2.2]cryptand][(UI(TDA)2)2(µ-I)] (6) and as a three-electron reductant toward cycloheptatriene (CHT) to form the U(IV) complex [K[2.2.2]cryptand][U(η7-C7H7)(TDA)2(THF)] (7). The reaction of 3 with cyclooctatetraene (COT) generates a mixture of the U(III) anion [K[2.2.2]cryptand][U(TDA)4] (1-crypt) and U(COT)2, while the addition of COT to complex 2 instead yields the dinuclear U(IV)-U(IV) inverse sandwich complex [U(TDA)3]2(µ-η8:η3-C8H8) (8). Two-electron reduction of the homoleptic Th(IV) amidate complex Th(TDA)4 (4) with KC8 gives the mono(arene) complex [K[2.2.2]cryptand][Th(TDA)3(THF)] (5). The C-C bond lengths and torsion angles in the bound arene of 5 suggest a direduced arene bound to a Th(IV) metal center; this conclusion is supported by DFT calculations.

Synthesis, Characterization, and Comparative Theoretical Investigation of Dinitrogen-Bridged Group 6-Gold Heterobimetallic Complexes.

We have prepared and characterized a series of unprecedented group 6-group 11, N2-bridged, heterobimetallic [ML4(η1-N2)(µ-η1:η1-N2)Au(NHC)]+ complexes (M = Mo, W, L2 = diphosphine) by treatment of trans-[ML4(N2)2] with a cationic gold(I) complex [Au(NHC)]+. The adducts are very labile in solution and in the solid, especially in the case of molybdenum, and decomposition pathways are likely initiated by electron transfers from the zerovalent group 6 atom to gold. Spectroscopic and structural parameters point to the fact that the gold adducts are very similar to Lewis pairs formed out of strong main-group Lewis acids (LA) and low-valent, end-on dinitrogen complexes, with a bent M-N-N-Au motif. To verify how far the analogy goes, we computed the electronic structures of [W(depe)2(η1-N2)(µ-η1:η1-N2)AuNHC]+ (10W+) and [W(depe)2(η1-N2)(µ-η1:η1-N2)B(C6F5)3] (11W). A careful analysis of the frontier orbitals of both compounds shows that a filled orbital resulting from the combination of the π* orbital of the bridging N2 with a d orbital of the group 6 metal overlaps in 10W+ with an empty sd hybrid orbital at gold, whereas in 11W with an sp3 hybrid orbital at boron. The bent N-N-LA arrangement maximizes these interactions, providing a similar level of N2 "push-pull" activation in the two compounds. In the gold case, the HOMO-2 orbital is further delocalized to the empty carbenic p orbital, and an NBO analysis suggests an important electrostatic component in the µ-N2-[Au(NHC)]+ bond.

Calcium-mediated C(sp3)-H Activation and Alkylation of Alkylpyridines.

Main-group metal calcium-mediated alkylpyridine benzylic C(sp3)-H activation and functionalization have been achieved. The reaction of a calcium hydride complex [{(DIPPnacnac)CaH(thf)}2] (DIPPnacnac = CH{(CMe)(2,6-iPr2-C6H3N)}2) with two equivalents of 2,6-lutidine rapidly yields a monomeric calcium alkyl complex with the release of dihydrogen. A hydride/carbon-bridged binuclear calcium complex [{(DIPPnacnac)Ca}2(µ-H){2-Me-6-(µ-CH2)-Py}(thf)] is obtained from an equimolar treatment of calcium hydride and 2,6-lutidine that is readily converted into mono- or binuclear calcium alkyl complexes upon subsequent addition of 2,6-lutidine. DFT calculations and kinetic studies are conducted to determine their reaction profiles. More significantly, this calcium hydride complex catalyzes regioselective benzylic C-H bond addition of alkylpyridines to a variety of alkenes, affording linear or branched alkylated pyridine derivatives.

Grafting of Lanthanum Complexes on a Functionalized Graphene Surface: Theoretical Investigation on Ethylene and 1,3-Butadiene Homo- and Co-Polymerization.

In this contribution, we describe the use of graphene as an efficient catalyst support and the role it plays in increasing the Lewis acidity of the supported metal complexes. By a density functional theory study, we show that the [La(N(SiMe3 )2 )3 ] complex can be easily grafted on graphene-OH and -COOH functionalized surfaces. Two stable mono-grafted compounds, (gO)-[La(N(SiMe3 )2 )2 ] and (gOO)-[La(N(SiMe3 )2 )2 ], are formed, behaving as stronger Lewis acids than the previously reported silica grafted analogues. To study the role of the graphene support in catalysis, we also computed the catalytic activity of the alkylated (gO)-[La(CH3 )2 ] and (gOO)-[La(CH3 )2 ] complexes in the ethylene and 1,3-butadiene homo- and co-polymerization reactions. Both compounds are efficient catalysts for the homo-polymerization of the ethylene and 1,3-butadiene. For the 1,3-butadiene homo-polymerization, the stereoselectivity outcome of the reaction differs according to the grafting site. The results computed for the co-polymerization reaction, finally, show that the high stability of the allylic products leads to the formation of block copolymers.

Hydrogen Isotope Exchange Catalyzed by Ru Nanocatalysts: Labelling of Complex Molecules Containing N-Heterocycles and Reaction Mechanism Insights.

Ruthenium nanocatalysis can provide effective deuteration and tritiation of oxazole, imidazole, triazole and carbazole substructures in complex molecules using D2 or T2 gas as isotopic sources. Depending on the substructure considered, this approach does not only represent a significant step forward in practice, with notably higher isotope uptakes, a broader substrate scope and a higher solvent applicability compared to existing procedures, but also the unique way to label important heterocycles using hydrogen isotope exchange. In terms of applications, the high incorporation of deuterium atoms, allows the synthesis of internal standards for LC-MS quantification. Moreover, the efficacy of the catalyst permits, even under subatmospheric pressure of T2 gas, the preparation of complex radiolabeled drugs owning high molar activities. From a fundamental point of view, a detailed DFT-based mechanistic study identifying undisclosed key intermediates, allowed a deeper understanding of C-H (and N-H) activation processes occurring at the surface of metallic nanoclusters.

Nickel(0)-Induced ß-H Elimination of Magnesium Alkyls: Formation and Reactivity of Heterometallic Hydrides.

We report the synthesis and reactivity of heterometallic Mg-Ni complexes with bridging hydrides. Treatment of magnesium monoalkyl complexes, which are supported by a tridentate ß-diketiminato ligand bearing a pendent phosphine group, with nickel(0) reagent Ni(COD)2 (COD: 1,5-cyclooctadiene) at a molar ratio of 2:1 resulted in the formation of a heterotrimetallic hydride-bridged [Mg-Ni-Mg] complex via facile elimination of the corresponding alkenes. A heterobimetallic hydride-bridged [Mg-Ni] complex served as an intermediate species for the formation of the [Mg-Ni-Mg] complex. Computational studies revealed that the reaction was initiated by coordination of nickel to magnesium followed by an alkyl group transfer. ß-H elimination at the nickel center subsequently occurred to give the heterometallic hydride-bridged complex. Density functional theory analysis also highlighted a three-center two-electron interaction for the Mg-H-Ni unit. The hydride-bridged [Mg-Ni-Mg] complex showed diverse reactivity toward unsaturated small molecules. For instance, reactions with isocyanides provided heterometallic species by coordination of isocyanides to the nickel center, with no subsequent reduction detected. Isocyanides could also be dissociated at 80 °C. In contrast, hydromagnesiation occurred upon treatment of the heterotrimetallic hydride with carbodiimides, affording C3-symmetric complexes with three heteroleptic magnesium mixed ß-diketiminate/amidinate moieties. The hydride-bridged heterotrimetallic complex underwent dehydrogenation reaction with phenyl acetylene to produce an acetylide-bridged [Mg-Ni-Mg] complex.