Substituent-Guided Cluster Nuclearity for Tetranuclear Iron(III) Compounds with Flat {Fe4(µ3-O)2} Butterfly Core.

The tetranuclear iron(III) compounds [Fe4(µ3-O)2(µ-LZ)4] (1-3) were obtained by reaction of FeCl3 with the shortened salen-type N2O2 tetradentate Schiff bases N,N'-bis(salicylidene)-o-Z-phenylmethanediamine H2LZ (Z = NO2, Cl and OMe, respectively), where the one-carbon bridge between the two iminic nitrogen donor atoms guide preferentially to the formation of oligonuclear species, and the ortho position of the substituent Z on the central phenyl ring selectively drives towards Fe4 bis-oxido clusters. All compounds show a flat almost-symmetric butterfly-like conformation of the {Fe4(µ3-O)2} core, surrounded by the four Schiff base ligands, as depicted by both the X-ray molecular structures of 1 and 2 and the optimized geometries of all derivatives as obtained by UM06/6-311G(d) DFT calculations. The strength of the antiferromagnetic exchange coupling constants between the iron(III) ions varies among the three derivatives, despite their magnetic cores remain structurally almost unvaried, as well as the coordination of the metal ions, with a distorted octahedral environment for the two-body iron ions, Feb, and a pentacoordination with trigonal bipyramidal geometry for the two-wing iron ions, Few. The different magnetic behavior within the series of examined compounds may be ascribed to the influence of the electronic features of Z on the electron density distribution (EDD) of the central {Fe4(µ3-O)2} core, substantiated by a Quantum Theory of Atoms In Molecules (QTAIM) topological analysis of the EDD, as obtained by UM06 calculations 1-3.

Role of the Solvent in the Reactivity of Bis-4-imidazoline-2-selone Derivatives toward I2: An Experimental and Theoretical Approach.

The reactivity of 1,1'-bis(3-methyl-4-imidazolin-2-selone)methane (L1) and 1,2-bis(3-methyl-4-imidazolin-2-selone)ethane (L2) toward I2 has been explored in MeCN under different experimental conditions and compared with that in CH2Cl2. The compounds [L1'](I)2 (I), [L1I]n(I)n (II), [L1(µ-Se)](I)2·1/2H2O (III), [L1I](I3)·2I2 (IV), and [L2](I)2·MeCN (V) were obtained and characterized. X-ray diffraction analyses point out an ionic nature for these compounds, which is presumably favored by the polarity of the solvent used. In particular, [L1I]n(I)n (II) represents the first example of an iodonium complex of imidazoline-2-selone derivatives, while [L1(µ-Se)](I)2·1/2H2O (III) represents a unique example of a dicationic [RSeSeSeR] triselane. Density functional theory calculations have allowed us to better understand the nature of the obtained compounds and to justify their formations in polarizing reaction conditions rather than in low polar solvents.

Gold Clusters: From the Dispute on a Gold Chair to the Golden Future of Nanostructures.

The present work opens with an acknowledgement to the research activity performed by Luciana Naldini while affiliated at the Università degli Studi di Sassari (Italy), in particular towards gold complexes and clusters, as a tribute to her outstanding figure in a time and a society where being a woman in science was rather difficult, hoping her achievements could be of inspiration to young female chemists in pursuing their careers against the many hurdles they may encounter. Naldini's findings will be a key to introduce the most recent results in this field, showing how the chemistry of gold compounds has changed throughout the years, to reach levels of complexity and elegance that were once unimagined. The study of gold complexes and clusters with various phosphine ligands was Naldini's main field of research because of the potential application of these species in diverse research areas including electronics, catalysis, and medicine. As the conclusion of a vital period of study, here we report Naldini's last results on a hexanuclear cationic gold cluster, [(PPh3)6Au6(OH)2]2+, having a chair conformation, and on the assumption, supported by experimental data, that it comprises two hydroxyl groups. This contribution, within the fascinating field of inorganic chemistry, provides the intuition of how a simple electron counting may lead to predictable species of yet unknown molecular architectures and formulation, nowadays suggesting interesting opportunities to tune the electronic structures of similar and higher nuclearity species thanks to new spectroscopic and analytical approaches and software facilities. After several decades since Naldini's exceptional work, the chemistry of the gold cluster has reached a considerable degree of complexity, dealing with new, single-atom precise, materials possessing interesting physico-chemical properties, such as luminescence, chirality, or paramagnetic behavior. Here we will describe some of the most significant contributions.

Can Serendipity Still Hold Any Surprises in the Coordination Chemistry of Mixed-Donor Macrocyclic Ligands? The Case Study of Pyridine-Containing 12-Membered Macrocycles and Platinum Group Metal Ions PdII, PtII, and RhIII.

This study investigates the coordination chemistry of the tetradentate pyridine-containing 12-membered macrocycles L1-L3 towards Platinum Group metal ions PdII, PtII, and RhIII. The reactions between the chloride salts of these metal ions and the three ligands in MeCN/H2O or MeOH/H2O (1:1 v/v) are shown, and the isolated solid compounds are characterized, where possible, by mass spectroscopy and 1H- and 13C-NMR spectroscopic measurements. Structural characterization of the 1:1 metal-to-ligand complexes [Pd(L1)Cl]2[Pd2Cl6], [Pt(L1)Cl](BF4), [Rh(L1)Cl2](PF6), and [Rh(L3)Cl2](BF4)·MeCN shows the coordinated macrocyclic ligands adopting a folded conformation, and occupying four coordination sites of a distorted square-based pyramidal and octahedral coordination environment for the PdII/PtII, and RhIII complexes, respectively. The remaining coordination site(s) are occupied by chlorido ligands. The reaction of L3 with PtCl2 in MeCN/H2O gave by serendipity the complex [Pt(L3)(m-1,3-MeCONH)PtCl(MeCN)](BF4)2·H2O, in which two metal centers are bridged by an amidate ligand at a Pt1-Pt2 distance of 2.5798(3) Å and feature one square-planar and one octahedral coordination environment. Density Functional Theory (DFT) calculations, which utilize the broken symmetry approach (DFT-BS), indicate a singlet d8-d8 PtII-PtII ground-state nature for this compound, rather than the alleged d9-d7 PtI-PtIII mixed-valence character reported for related dinuclear Pt-complexes.

Selective Formation, Reactivity, Redox and Magnetic Properties of MnIII and FeIII Dinuclear Complexes with Shortened Salen-Type Schiff Base Ligands.

The reactivity of the shortened salen-type ligands H3salmp, H2salmen and H2sal(p-X)ben with variable para-substituent on the central aromatic ring (X = tBu, Me, H, F, Cl, CF3, NO2) towards the trivalent metal ions manganese(III) and iron(III) is presented. The selective formation of the dinuclear complexes [M2(µ-salmp)2], M = Mn (1a), Fe (2a), [M2(µ-salmen)2(µ-OR)2)], R = Et, Me, H and M = Mn (3a-c) or Fe (4a-c), and (M2(µ-sal[p-X]ben)2(µ-OMe)2), X = tBu, Me, H, F, Cl, CF3, NO2 and M = Mn (5a-g) or Fe (6a-g), could be identified by reaction of the Schiff bases with metal salts and the base NEt3, and their characterization through elemental analysis, infrared spectroscopy, mass spectrometry and single-crystal X-ray diffraction of 2a·2AcOEt, 2a·2CH3CN and 3c·2DMF was performed. In the case of iron(III) and H3salmp, when using NaOH as a base instead of NEt3, the dinuclear complexes [Fe2(µ-salmp)(µ-OR)(salim)2], R = Me, H (2b,c) could be isolated and spectroscopically characterized, including the crystal structure of 2b·1.5H2O, which showed that rupture of one salmp3- to two coordinated salim- ligands and release of one salH molecule occurred. The same hydrolytic tendency could be identified with sal(p-X)ben ligands in the case of iron(III) also by using NEt3 or upon standing in solution, while manganese(III) did not promote such a C-N bond breakage. Cyclic voltammetry studies were performed for 3b, 4b, 5a and 6a, revealing that the iron(III) complexes can be irreversibly reduced to the mixed-valence FeIIFeIII and FeII2 dinuclear species, while the manganese(III) derivatives can be reversibly oxidized to either the mixed-valence MnIIIMnIV or to the MnIV2 dinuclear species. The super-exchange interaction between the metal centers, mediated by the bridging ligands, resulted in being antiferromagnetic (AFM) for the selected dinuclear compounds 3b, 4b, 5a, 5e,5f, 6a and 6e. The coupling constants J (-2JS1·S2 formalism) had values around -13 cm-1 for manganese(III) compounds, among the largest AFM coupling constants reported so far for dinuclear MnIII2 derivatives, while values between -3 and -10 cm-1 were obtained for iron(III) compounds.

Fascinating role of the number of f electrons in dipolar and octupolar contributions to quadratic hyperpolarizability of trinuclear lanthanides-biscopper Schiff base complexes.

The trinuclear [Ln(NO3)3(CuL)2] complexes (Ln = La, Ce, Sm, Eu and Er, L = N,N'-1,3-propylen-bis(salicylideniminato) have been investigated by a combination of HLS and EFISH techniques to evaluate both the dipolar and octupolar contributions to their significant quadratic hyperpolarizability and to confirm that f electrons may tune their second-order NLO response. In the complexes investigated, the major contribution to the total quadratic hyperpolarizability is largely controlled by the octupolar contribution, but the values of both ßEFISH and [parallel]ß(J=1)[parallel], that is the dipolar part, are significantly influenced by the number of f electrons, confirming that the unexpected polarizable character of f electrons may be the origin of such fascinating evidence.

Structure of the new mineral sarrabusite, Pb5CuCl4(SeO3)4, solved by manual electron-diffraction tomography.

The new mineral sarrabusite Pb(5)CuCl(4)(SeO(3))(4) has been discovered in the Sardinian mine of Baccu Locci, near Villaputzu. It occurs as small lemon-yellow spherical aggregates of tabular crystals (< 10 µm) of less than 100 µm in diameter. The crystal structure has been solved from and refined against electron diffraction of a microcrystal. Data sets have been measured by both a manual and an automated version of the new electron-diffraction tomography technique combined with the precession of the electron beam. The sarrabusite structure is monoclinic and consists of (010) layers of straight chains formed by alternating edge-sharing CuO(4)Cl(2) and PbO(8) polyhedra parallel to the c axis, which share corners laterally with two zigzag corner-sharing chains of PbO(6)Cl(2) and PbO(4)Cl(4) bicapped trigonal prisms. These blocks are linked together by SeO(3)(2-) flat-pyramidal groups.

Relevance of production method on the physical stability and in vitro biopharmaceutical performances of olanzapine orodispersible film.

This study assessed the relevance of the preparation process, namely solvent casting and hot-melt ram printing, on the biopharmaceutical performances of olanzapine orodispersible films (ODF) made of maltodextrins. Beside the clinical rationale, olanzapine was selected since it is subjected to polymorphism which impacts on its bioavailability. All ODF disintegrated in less than 3 min and showed content uniformity within the acceptable values. Dissolution testing in 3 mL of artificial saliva at pH = 6.8 evidenced that cast and printed ODF released after 5 min about 2% and 100%, respectively; at higher volume, a yellow precipitate was formed after disintegration of the cast ODF. At pH = 1.2, the t85% for cast ODF was reached after about 20 min and only the 90% olanzapine was dissolved increasing the pH to 6.8. These differences were explained by DSC, TGA and X-ray diffraction data which demonstrated that the casting method, which included the preparation of an aqueous slurry, favours the conversion from Form I to a hydrated one. Since extruded ODF resulted physically stable after 30 months, this suggests the potentiality of this technique to load in ODF drugs undergoing solid-state modification after exposure to aqueous media.

A selective, nontoxic, OFF-ON fluorescent molecular sensor based on 8-hydroxyquinoline for probing Cd(2+) in living cells.

In spite of the fact that cadmium(II) has been recognized as a highly toxic element and that excessive exposure to this metal ion has been reported to have many adverse effects on human health, very few selective and specific fluorescent probes are available for imaging Cd(2+) in living cells. Herein, we report the spectroscopic and photochemical characterization of 5-(5-chloro-8-hydroxyquinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane (L) as a fluorescent sensor for the selective imaging of Cd(2+) in living cells. In particular, the response of L to Cd(2+) was first assessed in aqueous solutions, sodium dodecyl sulfate micelles, and liposomes, and subsequently in living cells by fluorescence microscopy techniques. Cytofluorimetric analyses of leukemic HL-60 cells loaded with L also allowed evaluation of the toxicity of the probe and the selective analysis of its intracellular fluorescence in the presence of Cd(2+). Furthermore, the 1:1 complex species [Cd(L)H(2)O](2+) responsible for the OFF-ON chelation enhancement of fluorescence (CHEF) effect on L was structurally characterized; time-dependent DFT calculations allowed the prediction of theoretical excitations, which were comparable with the experimental ones.

Interaction of mixed-donor macrocycles containing the 1,10-phenanthroline subunit with selected transition and post-transition metal ions: metal ion recognition in competitive liquid-liquid solvent extraction of Cu(II), Zn(II), Pb(II), Cd(II), Ag(I), and Hg(II).

Two new mixed aza-thia crowns 5-aza-2,8-dithia[9]-(2,9)-1,10-phenanthrolinophane (L(4)) and 2,8-diaza-5-thia[9]-(2,9)-1,10-phenanthrolinophane (L(7)) have been synthesized and characterized. The coordination behavior of L(4) and L(7) toward the metal ions Cu(II), Zn(II), Pb(II), Cd(II), Hg(II), and Ag(I) was studied in aqueous solution by potentiometric methods, in CD3CN/D2O 4:1 (v/v) by (1)H NMR titrations and in the solid state. The data obtained were compared with those available for the coordination behavior toward the same metal ions of structurally analogous mixed donor macrocyclic ligands L(1)-L(3), L(5), L(6): all these contain a phenanthroline subunit but have only S/O/N(aromatic) donor groups in the remaining portion of the ring and are, therefore, less water-soluble than L(4) and L(7). The complexes [Cd(NO3)2(L(5))], [Pb(L(7))](ClO4)2 x 1/2MeCN, [Pb(L(4))](ClO4)2 x MeCN, and [Cu(L(7))](ClO4)2 x 3/2MeNO2 were characterized by X-ray crystallography. The efficacy of L(1)-L(7) in competitive liquid-liquid metal ion extraction of Cu(II), Zn(II), Cd(II), Pb(II), Ag(I), and Hg(II) was assessed. In the absence of Hg(II), a clear extraction selectivity for Ag(I) was observed in all systems investigated.

Characterization and physical stability of fast-dissolving microparticles containing nifedipine.

The suitability of a poly(sodium methacrylate, methyl methacrylate) (NaPMM), a novel mucoadhesive material, to prepare fast-dissolving microparticles containing nifedipine (NIF) in the range of 25-75% w/w was verified. Microparticles made of a low-viscosity hydroxypropylmethylcellulose (HPMC), were also prepared to compare the NIF release profile and bioadhesive properties. The release test was carried out in oversaturation conditions. The physical state of microparticles was also investigated. The formulation stability was evaluated over a 3-month period in long-term and accelerated conditions. The presence of amorphous NIF within freshly prepared microparticles was attributed to interactions between the drug and both polymers. NaPMM conferred to microparticles suitable mucoadhesive properties and significantly increased NIF dissolution rate in comparison to HPMC. Nevertheless, NIF apparent solubilities obtained by NaPMM microparticles were lower than those obtained by the HPMC set. After 3-month storage in the case of HPMC microparticles, NIF dissolution rate and supersaturation degree significantly decreased due to drug crystallization. As far as NaPMM microparticles are concerned, neither NIF dissolution rate nor apparent solubility significantly changed.

Intriguing C-HCu interactions in bis-(phenanthroline)Cu(i) redox mediators for dye-sensitized solar cells.

We have synthesized and characterized a series of bis-(phenanthroline)Cu(i) complexes of interest as redox mediators for dye-sensitized solar cells. This study led to the discovery of intriguing anagostic interactions between the hydrogen atom and the copper center as evidenced by X-ray diffraction studies on a single crystal. Remarkably, an anagostic interaction was found between a H atom of a methyl group and a copper site.

Sol-Gel Synthesis of CaTiO3:Pr3+ Red Phosphors: Tailoring the Synthetic Parameters for Luminescent and Afterglow Applications.

Two sol-gel synthetic routes for the preparation of CaTiO3:Pr3+ red emitting phosphors were compared, with the aim of producing nanostructured materials with tailored luminescence/afterglow properties. The effect of the synthetic parameters, such as the addition of a stabilizer and calcination temperature, on the structural, morphological, and optical properties was investigated. The desired perovskite phase was obtained at a calcination temperature of 800 °C or higher. Although the use of acetic acid as the chelating agent leads to micrometric particles with heterogeneous composition, the presence of hydroxypropylcellulose (HPC) results in smaller, less aggregated particles as well as in a high phase purity. At the highest HPC content, surface Ca-rich impurities were detected, although no segregated Ca-rich phases were detectable by X-ray powder diffraction analyses. Luminescence properties were found to be positively related to the phase purity of the oxide, with the highest quantum yields at temperatures equal to or higher than 1000 °C. On the contrary, persistent luminescence properties were highest at intermediate calcination temperatures and for samples synthesized with acetic acid. Overall, a notable role of oxygen vacancies resulting from local Ca excess was observed, acting as trap levels promoting longer relaxation pathways. Thanks to the small-sized particles and best steady-state luminescent properties due to a substantial decrease of lattice defects, the HPC synthesis is a promising strategy for light-emitting diode applications. On the other hand, the acetic acid synthesis promoted a higher defect density, which is required for an efficient yield of light emission in the long time range and is thus more suitable for afterglow applications.

Aspirin and paracetamol removal using a commercial micro-sized TiO2 catalyst in deionized and tap water.

Micro-sized TiO2 catalyst was employed to degrade pharmaceutical compounds, i.e. aspirin and paracetamol, two of the most widely used drugs, purchasable without prescription. Their active agents, acetylsalicylic acid and acetaminophen, are characterized by different substituent groups, linked to the aromatic ring, which affect both the photodegradation and mineralization processes. The experimental conditions highlight the relationship between the nature of the pristine molecules, their degradation mechanisms, their mutual interference and the water's role. The research started from model systems with a single pollutant to the mixture of them and finally by moving from deionized water to tap water.

Novel coumarins and related copper complexes with biological activity: DNA binding, molecular docking and in vitro antiproliferative activity.

Coumarins show biological activity and are widely exploited for their therapeutic effects. Although a great number of coumarins substituted by heterocyclic moieties have been prepared, few studies have been carried out on coumarins containing pyridine heterocycle, which is known to modulate their physiological activities. We prepared and characterized three novel 3-(pyridin-2-yl)coumarins and their corresponding copper(II) complexes. We extended our investigations also to three known similar coumarins, since no data about their biochemical activity was previously been reported. The antiproliferative activity of the studied compounds was tested against human derived tumor cell lines and one human normal cell line. The DNA binding constants were determined and docking studies with DNA carried out. Selected Quantitative Structure-Activity Relationship (QSAR) descriptors were calculated in order to relate a set of structural and topological descriptors of the studied compounds to their DNA interaction and cytotoxic activity.

Fast-dissolving mucoadhesive microparticulate delivery system containing piroxicam.

We have studied the feasibility of preparing fast-dissolving mucoadhesive microparticulate delivery systems containing amorphous piroxicam to improve drug residence time on sublingual mucosa and drug dissolution rate. Two new mucoadhesive carriers, Eudragit L100 (EuLNa) and Eudragit S100 (EuSNa) sodium salts, both characterized by a fast intrinsic dissolution rate, have been selected. Microparticles containing piroxicam and EuLNa (series 1) or EuSNa (series 2) in ratios from 15/85 to 85/15% (m/m) were prepared by spray drying. The morphology and physical state of the microparticles and the effect of the microparticle composition on the piroxicam release and mucoadhesion were investigated. Piroxicam loaded into the microparticles was found to be in the amorphous form at all drug/copolymer ratios. This feature was ascribed to the presence of an H-bond between the NH of piroxicam and a CO of the copolymers. The formation of solid solutions improved the dissolution rate and the apparent drug solubility. The mucoadhesive properties were affected by the drug/copolymer ratio and in series 2 the microparticles containing more than 50% (m/m) of piroxicam did not show mucoadhesive properties. The delivery system made of piroxicam and EuLNa in the ratio 70/30% (m/m) appears to be the most promising because it contains the lowest amount of polymer able to confer mucoadhesive properties and increase apparent drug solubility.

Zinc(II)-methimazole complexes: synthesis and reactivity.

The tetrahedral S-coordinated complex [Zn(MeImHS)4](ClO4)2, synthesised from the reaction of [Zn(ClO4)2] with methimazole (1-methyl-3H-imidazole-2-thione, MeImHS), reacts with triethylamine to yield the homoleptic complex [Zn(MeImS)2] (MeImS = anion methimazole). ESI-MS and MAS (13)C-NMR experiments supported MeImS acting as a (N,S)-chelating ligand. The DFT-optimised structure of [Zn(MeImS)2] is also reported and the main bond lengths compared to those of related Zn-methimazole complexes. The complex [Zn(MeImS)2] reacts under mild conditions with methyl iodide and separates the novel complex [Zn(MeImSMe)2I2] (MeImSMe = S-methylmethimazole). X-ray diffraction analysis of the complex shows a ZnI2N2 core, with the methyl thioethers uncoordinated to zinc. Conversely, the reaction of [Zn(MeImS)2] with hydroiodic acid led to the formation of the complex [Zn(MeImHS)2I2] having a ZnI2S2 core with the neutral methimazole units S-coordinating the metal centre. The Zn-coordinated methimazole can markedly modify the coordination environment when changing from its thione to thionate form and vice versa. The study of the interaction of the drug methimazole with the complex [Zn(MeIm)4](2+) (MeIm = 1-methylimidazole) - as a model for Zn-enzymes containing a N4 donor set from histidine residues - shows that methimazole displaces only one of the coordinated MeIm molecules; the formation constant of the mixed complex [Zn(MeIm)3(MeImHS)](2+) was determined.

An unprecedented example of a cis-phosphonodithioato nickel(II) complex built by an extensive hydrogen bonding supramolecular network.

The P-N bond hydrolysis of the 4-methoxyphenyl-ammonium ethylamido-phosphonodithioato ligand during its complexation to NiII leads to the first example of phosphonodithioato nickel(II) complex having a cis configuration; this complex is stabilised in the solid state by an extensive and intricate network of hydrogen bondings involving the released ethylenediamine and a water molecule.

New Class of Chiral Diphosphine Ligands for Highly Efficient Transition Metal-Catalyzed Stereoselective Reactions: The Bis(diphenylphosphino) Five-membered Biheteroaryls.

The synthesis and application of three examples of a new class of chiral (C(2)) atropisomeric diphosphines characterized by two interconnected five-membered heteroaromatic rings, with hindered rotation around the interanular bond, are described. Optically pure (+)- and (-)-2,2'-bis(diphenylphosphino)-4,4',6,6'-tetramethyl-3,3'-bibenzo[b]thiophene (tetraMe-bitianp) (1a) and the parent unsubstituted system (+)- and (-)-bitianp (1b) were synthesized. They were found to be optically stable at 100 degrees C and were successfully employed as ligands in the Ru(II)-catalyzed hydrogenation of alpha- and beta-oxo esters to the corresponding alpha- and beta-hydroxy esters and in the hydrogenation of olefinic substrates. The optical and chemical yields were comparable with those reported for the same Ru(II)-binap-catalyzed reactions carried out under the same experimental conditions. The 2,2'-bis(diphenylphosphino)-3,3'-bibenzo[b]furan (1c), the oxygenated analogue of bitianp, was found to be configurationally unstable at room temperature. Complete structural X-ray elucidation of the Pd complexes of 1a-c is reported. The advantages of these biheteroaromatic ligands over the classical biaryl systems are discussed.

Synthesis and Chemical and Electrochemical Characterization of Fe-S Carbonyl Clusters. X-ray Crystal Structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)].

A reinvestigation of the redox behavior of the [Fe(3)(&mgr;(3)-S)(CO)(9)](2)(-) dianion led to the isolation and characterization of the new [Fe(5)S(2)(CO)(14)](2)(-), as well as the known [Fe(6)S(6)(CO)(12)](2)(-) dianion. As a corollary, new syntheses of the [Fe(3)S(CO)(9)](2)(-) dianion are also reported. The [Fe(5)S(2)(CO)(14)](2)(-) dianion has been obtained by oxidative condensation of [Fe(3)S(CO)(9)](2)(-) induced by tropylium and Ag(I) salts or SCl(2), or more straightforwardly through the reaction of [Fe(4)(CO)(13)](2)(-) with SCl(2). The [Fe(6)S(6)(CO)(12)](2)(-) dianion has been isolated as a byproduct of the synthesis of [Fe(3)S(CO)(9)](2)(-) and [Fe(5)S(2)(CO)(14)](2)(-) or by reaction of [Fe(4)(CO)(13)](2)(-) with elemental sulfur. The structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)] were determined by single-crystal X-ray diffraction analyses. Crystal data: for [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)], monoclinic, space group P2(1)/c (No. 14), a = 24.060(5), b = 14.355(6), c = 23.898(13) Å, beta = 90.42(3) degrees, Z = 4; for [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)], monoclinic, space group C2/c (No. 15), a = 34.424(4), b = 14.081(2), c = 19.674(2) Å, beta = 115.72(1) degrees, Z = 4. The new [Fe(5)S(2)(CO)(14)](2)(-) dianion shows a "bow tie" arrangement of the five metal atoms. The two Fe(3) triangles sharing the central Fe atom are not coplanar and show a dihedral angle of 55.08(3) degrees. Each Fe(3) moiety is capped by a triply bridging sulfide ligand. The 14 carbonyl groups are all terminal; two are bonded to the unique central atom and three to each peripheral iron atom. Protonation of the [Fe(5)S(2)(CO)(14)](2)(-) dianion gives reversibly rise to the corresponding [HFe(5)S(2)(CO)(14)](-) monohydride derivative, which shows an (1)H-NMR signal at delta -21.7 ppm. Its further protonation results in decomposition to mixtures of Fe(2)S(2)(CO)(6) and Fe(3)S(2)(CO)(9), rather than formation of the expected H(2)Fe(5)S(2)(CO)(14) dihydride. Exhaustive reduction of [Fe(5)S(2)(CO)(14)](2)(-) with sodium diphenyl ketyl progressively leads to fragmentation into [Fe(3)S(CO)(9)](2)(-) and [Fe(CO)(4)](2)(-), whereas electrochemical, as well as chemical oxidation with silver or tropylium tetrafluoroborate, in dichloromethane, generates the corresponding [Fe(5)S(2)(CO)(14)](-) radical anion which exhibits an ESR signal at g = 2.067 at 200 K. The electrochemical studies also indicated the existence of a subsequent one-electron anodic oxidation which possesses features of chemical reversibility in dichloromethane but not in acetonitrile solution. A reexamination of the electrochemical behavior of the [Fe(3)S(CO)(9)](2)(-) dianion coupled with ESR monitoring enabled the spectroscopic characterization of the [Fe(3)S(CO)(9)](-) radical monoanion and demonstrated its direct involvement in the generation of the [Fe(5)S(2)(CO)(14)](n)()(-) (n = 0, 1, 2) system.