Orientated-quantitative computed tomography study on individualized axial safety target area of femoral neck screw channel and establishment of a stable spatial coordinate system based on anterior cortex of femoral neck basilar.

BACKGROUND: Frequent in-out-in femoral neck screws were reported potential huge iatrogenic-injury risks, related to axial safe target area (ASTA) of femoral neck screws channel. However, orientated-quantitative ASTA based on stable coordinate system was unreported before. METHODS: Three-dimensional reconstruction was performed on computed tomography (CT) images of 139 intact normal hips, and the intersection area, defined as ASTA, was obtained by superimposing the axial CT images of each femoral neck. Taking anterior cortex of femoral neck basilar (AC-FNB) as landmark, a coordinate system was established to measure the anterior-posterior diameter (D-AP), the superior-inferior diameter (D-SI) and the oblique angle respectively. Each intersection was overlaid up to the axial CT images to determine the coronal location of the ASTA boundaries. RESULTS: Each ASTA presented an inclined rounded triangle with a flat anterior base coincided with AC-FNB. There were significant sex differences in D-SI (male: 33.6±2.3 vs. female: 29.4±1.9 mm) and D-AP (male: 25.3±2.1 vs. 21.9±1.9 mm), P <0.001. D-SI was found to be positively correlated with D-AP ( R2 =0.6). All fluoroscopic visible border isthmus completely matched the corresponding ASTA boundaries. The oblique angle was 5-53° (male: 28.1±10.3°, female: 27.1±8.2°) without significant difference between sexes. CONCLUSION: The intersection method was employed to conveniently acquire orientated-quantitative individualized ASTA. Under this coordinate system, x-ray data of screws could be converted to axial coordinates in CT ASTA, which could help surgeons design combined screws configuration preoperatively and evaluate quantitatively their axial position intraoperatively.

Genome-wide association and replication studies identified TRHR as an important gene for lean body mass.

Low lean body mass (LBM) is related to a series of health problems, such as osteoporotic fracture and sarcopenia. Here we report a genome-wide association (GWA) study on LBM variation, by using Affymetrix 500K single-nucleotide polymorphism (SNP) arrays. In the GWA scan, we tested 379,319 eligible SNPs in 1,000 unrelated US whites and found that two SNPs, rs16892496 (p = 7.55 x 10(-8)) and rs7832552 (p = 7.58 x 10(-8)), within the thyrotropin-releasing hormone receptor (TRHR) gene were significantly associated with LBM. Subjects carrying unfavorable genotypes at rs16892496 and rs7832552 had, on average, 2.70 and 2.55 kg lower LBM, respectively, compared to those with alternative genotypes. We replicated the significant associations in three independent samples: (1) 1488 unrelated US whites, (2) 2955 Chinese unrelated subjects, and (3) 593 nuclear families comprising 1972 US whites. Meta-analyses of the GWA scan and the replication studies yielded p values of 5.53 x 10(-9) for rs16892496 and 3.88 x 10(-10) for rs7832552. In addition, we found significant interactions between rs16892496 and polymorphisms of several other genes involved in the hypothalamic-pituitary-thyroid and the growth hormone-insulin-like growth factor-I axes. Results of this study, together with the functional relevance of TRHR in muscle metabolism, support the TRHR gene as an important gene for LBM variation.

Chromosomal regions 22q13 and 3p25 may harbor quantitative trait loci influencing both age at menarche and bone mineral density.

Late age at menarche (AAM), an important type of endocrinopathy in females, is associated with lower bone mineral density (BMD), a major risk factor for osteoporosis. The correlation is mainly mediated through common genetic factors, which are largely unknown. A bivariate genome-wide linkage scan was conducted on 2,522 females from 414 Caucasian pedigrees to identify quantitative trait loci influencing both AAM and BMD. The strongest linkage signal was detected on chromosome 22q13. Other regions such as the 3q13, 3p25, 7p15, and 15q13 were also suggested. The inferred promising candidate genes in the linkage regions may contribute to our understanding of pathogenesis of endocrinopathy and osteoporosis in females.

Bivariate genome linkage analysis suggests pleiotropic effects on chromosomes 20p and 3p for body fat mass and lean mass.

Total body fat mass (TBFM) and total body lean mass (TBLM) are the major components of the human body. Although these highly correlated phenotypic traits are frequently used to characterize obesity, the specific shared genetic factors that influence both traits remain largely unknown. Our study was aimed at identifying common quantitative trait loci (QTLs) contributing to both TBFM and TBLM. We performed a whole genome-linkage scan study in a large sample of 3255 subjects from 420 Caucasian pedigrees. Bivariate linkage analysis was carried out in both the entire sample and gender-specific subsamples. Several potentially important genomic regions that may harbour QTLs important for TBFM and TBLM were identified. For example, 20p12-11 achieved a LOD score of 2.04 in the entire sample and, in the male subsample, two genomic regions, 20p12 (LOD=2.08) and 3p26-25 (LOD=1.92), showed suggestive linkage. In addition, two-point linkage analyses for chromosome X showed suggestive linkages on Xp22 in the entire sample (LOD=2.14) and significant linkage on Xp22 in the female subsample (LOD=3.05). Complete pleiotropy was suggested for 20p12 and 3p26-25 in males. Our results suggest that QTLs on chromosomes 20p12, 3p26-25 and Xp22 may jointly influence TBFM and TBLM. Further fine mapping and gene identification studies for these pleiotropic effects are needed.

Chromosome 2q32 may harbor a QTL affecting BMD variation at different skeletal sites.

UNLABELLED: BMDs at different skeletal sites share some common genetic determinants. Using PCA and bivariate linkage analysis, we identified a QTL on chromosome 2q32 with significant pleiotropic effects on BMDs at different skeletal sites. INTRODUCTION: BMDs at the hip, spine, and forearm are genetically correlated, suggesting the existence of quantitative trait loci (QTLs) with concurrent effects on BMDs at these three skeletal sites. Consequently, it is important to identify these QTLs in the human genome and, for those implicated QTLs, it is important to differentiate between pleiotropic effects, caused by a single gene that concurrently effects these traits, and co-incident linkage, caused by multiple, closely linked, genes that independently effect these traits. MATERIALS AND METHODS: For a sample of 451 American white pedigrees made up of 4,498 individuals, we evaluated the correlations between BMDs at the three skeletal sites. We carried out principal component analysis (PCA) for the three correlated traits and obtained a major component, PC1, which accounts for >75% of the co-variation of BMDs at the three sites. We subsequently conducted a whole genome linkage scan for PC1 and performed bivariate linkage analysis for pairs of the three traits (i.e., forearm/spine BMD, hip/forearm BMD, and hip/spine BMD). RESULTS: Chromosome region 2q32, near the marker GATA65C03M, showed strong linkage to PC1 (LOD = 3.35). Subsequent bivariate linkage analysis substantiated linkage at 2q32 for each trait pair (LOD scores were 2.65, 2.42, and 2.13 for forearm/spine BMD, hip/forearm BMD, and hip/spine BMD, respectively). Further analyses rejected the hypothesis of co-incident linkage (p(0)[forearm/spine] = 0.0005, p(0)[hip/forearm] = 0.004, p(0)(hip/spine] = 0.001) but failed to reject the hypothesis of pleiotropy (p(1)[forearm/spine] = 0.35, p(1)[hip/forearm] = 0.07, p(1)[hip/spine] = 0.15). CONCLUSIONS: Our results strongly support the conclusion that chromosome region 2q32 may harbor a QTL with pleiotropic effects on BMDs at different skeletal sites.

A bivariate whole-genome linkage scan suggests several shared genomic regions for obesity and osteoporosis.

CONTEXT: A genome-wide bivariate analysis was conducted for body fat mass (BFM) and bone mineral density (BMD) in a large Caucasian sample. We found some quantitative trait loci shared by BFM and BMD in the total sample and the gender-specific subgroups, and quantitative trait loci with potential pleiotropy were disclosed. BFM and BMD, as the respective measure for obesity and osteoporosis, are phenotypically and genetically correlated. However, specific genomic regions accounting for their genetic correlation are unknown. OBJECTIVE: To identify systemically the shared genomic regions for BFM and BMD, we performed a bivariate whole-genome linkage scan in 4498 Caucasian individuals from 451 families for BFM and BMD at the hip, spine, and wrist, respectively. Linkage analyses were performed in the total sample and the male and female subgroups, respectively. RESULTS: In the entire sample, suggestive linkages were detected at 7p22-p21 (LOD 2.69) for BFM and spine BMD, 6q27 (LOD 2.30) for BFM and hip BMD, and 11q13 (LOD 2.64) for BFM and wrist BMD. Male-specific suggestive linkages were found at 13q12 (LOD 3.23) for BFM and spine BMD and at 7q21 (LOD 2.59) for BFM and hip BMD. Female-specific suggestive LOD scores were 3.32 at 15q13 for BFM and spine BMD and 3.15 at 6p25-24 for BFM and wrist BMD. CONCLUSIONS: Several shared genomic regions for BFM and BMD were identified here. Our data may benefit further positional and functional studies, aimed at eventually uncovering the complex mechanism underlying the shared genetic determination of obesity and osteoporosis.

Genome-wide scan identified QTLs underlying femoral neck cross-sectional geometry that are novel studied risk factors of osteoporosis.

UNLABELLED: A genome-wide screen was conducted using a large white sample to identify QTLs for FNCS geometry. We found significant linkage of FNCS parameters to 20q12 and Xq25, plus significant epistatic interactions and sex-specific QTLs influencing FNCS geometry variation. INTRODUCTION: Bone geometry, a highly heritable trait, is a critical component of bone strength that significantly determines osteoporotic fracture risk. Specifically, femoral neck cross-sectional (FNCS) geometry is significantly associated with hip fracture risk as well as genetic factors. However, genetic research in this respect is still in its infancy. MATERIALS AND METHODS: To identify the underlying genomic regions influencing FNCS variables, we performed a remarkably large-scale whole genome linkage scan involving 3998 individuals from 434 pedigrees for four FNCS geometry parameters, namely buckling ratio (BR), cross-sectional area (CSA), cortical thickness (CT), and section modulus (Z). The major statistical approach adopted is the variance component method implemented in SOLAR. RESULTS: Significant linkage evidence (threshold LOD = 3.72 after correction for tests of multiple phenotypes) was found in the regions of 20q12 and Xq25 for CT (LOD = 4.28 and 3.90, respectively). We also identified eight suggestive linkage signals (threshold LOD = 2.31 after correction for multiple tests) for the respective geometry traits. The above findings were supported by principal component linkage analysis. Of them, 20q12 was of particular interest because it was linked to multiple FNCS geometry traits and significantly interacted with five other genomic loci to influence CSA variation. The effects of 20q12 on FNCS geometry were present in both male and female subgroups. Subgroup analysis also revealed the presence of sex-specific quantitative trait loci (QTLs) for FNCS traits in the regions such as 2p14, 3q26, 7q21 and 15q21. CONCLUSIONS: Our findings laid a foundation for further replication and fine-mapping studies as well as for positional and functional candidate gene studies, aiming at eventually finding the causal genetic variants and hidden mechanisms concerning FNCS geometry variation and the associated hip fractures.

Epistasis between loci on chromosomes 2 and 6 influences human height.

CONTEXT: Human height is a typical and important complex trait, which is determined by both actions and interactions of multiple genes. Although an increasing number of genes or genomic regions have been discovered for their independent effects on height variation, no study has been performed to identify genes or loci that interact to control the trait. OBJECTIVE: This study aimed to search for potential genomic regions that harbor interactive genes underlying human height. METHODS: Here with a sample containing 3726 Caucasians, the largest one ever obtained from a single population of the same ethnicity among genetic linkage studies of human complex traits, we performed variance component linkage analyses of height based on a two-locus epistatic model. We examined pairwise genetic interaction among three regions, 9q22, 6p21, and 2q21, which achieved significant or suggestive linkage signals for height in our recent whole genome scan. RESULTS: Significant genetic interaction between 6p21 and 2q21 was detected, with 2q21 achieving a maximum LOD score of 3.21 (P = 0.0035) under the epistatic model, compared with a maximum LOD score of 1.63 under a two-locus additive model. Interestingly, 6p21 contains a cluster of candidate genes for skeletal growth, suggesting a mechanism whereby 2q21 regulates height through 6p21. CONCLUSION: By providing the first evidence for genetic interaction underlying human height variation, this study further delineated the genetic architecture of human height and contributed to the genetic dissection of human complex traits in general.

Linkage and association between CA repeat polymorphism of the TNFR2 gene and obesity phenotypes in two independent Caucasian populations.

Previously, our group has reported a suggestive linkage evidence of 1p36 with body mass index (BMI) (LOD = 2.09). The tumor necrosis factor receptor 2 (TNFR2) at 1p36 is an excellent positional and functional candidate gene for obesity. In this study, we have investigated the linkage and association between the TNFR2 gene and obesity phenotypes in two large independent samples, using the quantitative transmission disequilibrium tests (QTDT). The first group was made up of 1,836 individuals from 79 multi-generation pedigrees. The second group was a randomly ascertained set of 636 individuals from 157 US Caucasian nuclear families. Obesity phenotypes tested include BMI, fat mass, and percentage fat mass (PFM). A significant result (P = 0.0056) was observed for linkage with BMI in the sample of the multigenerational pedigrees. Our data support the TNFR2 gene as a quantitative trait locus (QTL) underlying BMI variation in the Caucasian populations.

Tests of linkage and/or association of genes for vitamin D receptor, osteocalcin, and parathyroid hormone with bone mineral density.

Bone mineral density (BMD) is a major determinant of osteoporotic fractures (OFs). The heritability of BMD ranges from 50% to 90% in human populations. Extensive molecular genetic analyses have been performed through traditional linkage or association approaches to test and identify genes or genomic regions underlying BMD variation. The results, particularly those concerning the vitamin D receptor (VDR) gene, have been inconsistent and controversial. In this study, we simultaneously test linkage and/or association of the genes for VDR, osteocalcin (also known as bone Gla protein [BGP]), and parathyroid hormone (PTH) with BMD in 630 subjects from 53 human pedigrees. Each of these pedigrees was ascertained through a proband with an extreme BMD value at the hip or spine (Z score < or = -1.28). For the raw BMD values, adjusting for significant covariate effects of age, sex, and weight, we performed tests for linkage alone, association alone, and then both linkage and association. For the spine BMD, at the two markers (ApaI and FokI) inside the VDR gene we found evidence for linkage (p < 0.05) and for both linkage and association by the transmission disequilibrium test (TDT; p < 0.05); association was detected (p < 0.07) with regular statistical testing by analyses of variance (ANOVA). In addition, significant results were found for association alone (p < 0.05), linkage alone (p = 0.0005), and for linkage and association (p = 0.0019) for the intragenic marker HindIII of the BGP gene for the hip BMD. Through testing for association, linkage, and linkage and association simultaneously, our data support the VDR gene as a quantitative trait locus (QTL) underlying spine BMD variation and the BGP gene as a QTL underlying hip BMD variation. However, our data do not support the PTH gene as a QTL underlying hip or spine BMD variation. This is the first study in the broad field of bone genetics that tests candidate genes as QTLs for BMD by testing simultaneously for association alone, for linkage alone, and for association and linkage (via the TDT).

Genome scan for QTLs underlying bone size variation at 10 refined skeletal sites: genetic heterogeneity and the significance of phenotype refinement.

To identify quantitative trait loci (QTLs) underlying variation in bone size, we conducted a whole-genome linkage scan in 53 pedigrees with 630 subjects using 380 microsatellite markers. Lumbar area 1, 2, 3, and 4 at the spine, femoral neck, trochanter, intertrochanter areas at the hip, ultradistal, mid-distal, and one-third distal areas at the wrist were measured by dual-energy X-ray absorptiometry (DXA), and adjusted for age, height, weight, and sex. Two-point and multipoint linkage analyses were performed for skeletal bone size at each site and their composite measurements using the SOLAR package. Two chromosomal regions (1q22 and 10q21) were identified with significant evidence of linkage (LOD > 4.32) to one-third distal area, and three were identified with suggestive evidence of linkage (LOD > 2.93) to bone size in one skeletal site. Our results indicated that the low power of QTLs mapping for composite phenotypic measurements may result from genetic heterogeneity of complex traits.

A follow-up linkage study for quantitative trait loci contributing to obesity-related phenotypes.

We have recently reported a whole-genome scan in a sample of 630 subjects from 53 extended pedigrees, in which several genomic regions that may contain quantitative trait loci (QTLs) for obesity were suggested. In the present study, with an attempt to confirm our previous findings, we performed a follow-up linkage study in an expanded sample of 79 pedigrees with 1816 subjects (including expanded previous 53 pedigrees and 26 newly recruited pedigrees containing 1058 subjects). A new set of microsatellite markers spanning previously identified regions were selected, with the average genomic distance narrowed from approximately 10 cM to approximately 5 cM in this study. Using a variance component method, we performed two- and multipoint linkage analyses in the following three sample sets: expanded previous 53 pedigrees (758 subjects), 26 new pedigrees, and 79 total pedigrees. For body mass index, analyses of the expanded 53 pedigrees attained a LOD score of 2.32 near marker D1S468 in two-point analysis and a maximum LOD score (MLS) of 2.21 in multipoint analysis; 2q14 near marker D2S347 attained a LOD score of 3.42 in two-point analysis and a MLS of 3.93 in multipoint analysis. The linkage peaks at 1p36 and 2q14 were further supported in the analyses of all 79 pedigrees, with multipoint MLS being 1.38 and 0.90, respectively. For fat mass, genomic region 6q27 achieved a LOD score of 1.24 in two-point analysis and an MLS of 0.92 in multipoint analysis in all 79 pedigrees. Our data support that 1p36, 2q14, and 6q27 are promising regions that may harbor QTLs for obesity phenotypes.

Bivariate whole genome linkage analyses for total body lean mass and BMD.

UNLABELLED: A genome-wide bivariate analysis was conducted for TBLM and BMD at the spine and hip in a large white sample. We found some QTLs shared by TBLM and BMD in the entire sample and the sex-specific subgroups, and QTLs with potential pleiotropy were disclosed. INTRODUCTION: Previous studies suggested that total body lean mass (TBLM) and BMD are highly genetically correlated. However, the specific shared genetic factors between TBLM and BMD are unknown. MATERIALS AND METHODS: To identify the specific quantitative trait loci (QTLs) shared by TBLM and BMD at the spine (L1-L4) and total hip, we performed bivariate whole genome linkage analysis (WGLA) in a large sample involving 4498 white subjects of European origin. RESULTS: Multipoint bivariate linkage analyses for 22 autosomes showed evidence of significant linkage with an LOD score of 4.86 at chromosome region 15q13 for TBLM and spine BMD in women, and suggestive linkage findings (LOD > 2.2) at 7p22 for TBLM and spine BMD for the entire sample, at 7q32 for TBLM and BMD at both spine and hip in women, and at 7q21 and 13p11 for TBLM and BMD at both spine and hip in men. Two-point linkage analyses for chromosome X also showed significant linkage signals at several regions such as Xq25. Complete pleiotropy (a single locus influencing both traits) was suggested at 7q32 and 13q11 for TBLM and BMD. Additionally, complete co-incident linkage (separate tightly clustered loci each influencing a single trait) was detected at 7p22 for TBLM and spine BMD. CONCLUSIONS: We identified several genomic regions shared by TBLM and BMD in whites. Further studies may focus on fine mapping and identification of the specific QTLs in these candidate genomic regions.

A bivariate whole genome linkage study identified genomic regions influencing both BMD and bone structure.

Areal BMD (aBMD) and areal bone size (ABS) are biologically correlated traits and are each important determinants of bone strength and risk of fractures. Studies showed that aBMD and ABS are genetically correlated, indicating that they may share some common genetic factors, which, however, are largely unknown. To study the genetic factors influencing both aBMD and ABS, bivariate whole genome linkage analyses were conducted for aBMD-ABS at the femoral neck (FN), lumbar spine (LS), and ultradistal (UD)-forearm in a large sample of 451 white pedigrees made up of 4498 individuals. We detected significant linkage on chromosome Xq27 (LOD = 4.89) for LS aBMD-ABS. In addition, we detected suggestive linkages at 20q11 (LOD = 3.65) and Xp11 (LOD = 2.96) for FN aBMD-ABS; at 12p11 (LOD = 3.39) and 17q21 (LOD = 2.94) for LS aBMD-ABS; and at 5q23 (LOD = 3.54), 7p15 (LOD = 3.45), Xq27 (LOD = 2.93), and 12p11 (LOD = 2.92) for UD-forearm aBMD-ABS. Subsequent discrimination analyses indicated that quantitative trait loci (QTLs) at 12p11 and 17q21 may have pleiotropic effects on aBMD and ABS. This study identified several genomic regions that may contain QTLs important for both aBMD and ABS. Further endeavors are necessary to follow these regions to eventually pinpoint the genetic variants affecting bone strength and risk of fractures.

CA repeat polymorphism of the TNFR2 gene is not associated with bone mineral density in two independent Caucasian populations.

Osteoporosis has a strong genetic component, but the genes involved are poorly defined. Genome-wide scans in multiple populations have identified chromosome 1p36 as one region linked to bone mineral density (BMD). The tumor necrosis factor receptor 2 (TNFR2) at 1p36 is a positional and functional candidate gene in osteoporosis. In this study, we conducted linkage and association tests between the CA repeat polymorphism of the TNFR2 gene and BMD in two large independent samples using the quantitative transmission disequilibrium test (QTDT) program. The first group of subjects was composed of 1836 individuals from 79 multigeneration pedigrees. The second group was a randomly ascertained set of 636 individuals from 157 nuclear families. We found no evidence of association or linkage for spine or hip BMD in the samples of the multigenerational pedigrees or nuclear families. Through testing for association and for linkage, our data do not support the TNFR2 gene as a QTL underlying hip or spine BMD variation in our Caucasian populations.

Genetic linkage of human height is confirmed to 9q22 and Xq24.

Human height is an important and heritable trait. Our previous two genome-wide linkage studies using 630 (WG1 study) and an extended sample of 1,816 Caucasians (WG2 study) identified 9q22 [maximum LOD score (MLS)=2.74 in the WG2 study] and preliminarily confirmed Xq24 (two-point LOD score=1.91 in the WG1 study, 2.64 in the WG2 study) linked to height. Here, with a much further extended large sample containing 3,726 Caucasians, we performed a new genome-wide linkage scan and confirmed, in high significance, the two regions' linkage to height. An MLS of 4.34 was detected on 9q22 and a two-point LOD score of 5.63 was attained for Xq24. In an independent sub-sample (i.e., the subjects not involved in the WG1 and WG2 studies), the two regions also achieved significant empirical P values (0.002 and 0.004, respectively) for "region-wise" linkage confirmation. Importantly, the two regions were replicated on a genotyping platform different from the WG1 and WG2 studies (i.e., a different set of markers and different genotyping instruments). Interestingly, 9q22 harbors the ROR2 gene, which is required for growth plate development, and Xq24 was linked to short stature. With the largest sample from a single population of the same ethnicity in the field of linkage studies for complex traits, our current study, together with two previous ones, provided overwhelming evidence substantiating 9q22 and Xq24 for height variation. In particular, our three consecutive whole genome studies are uniquely valuable as they represent the first practical (rather than simulated) example of how significant increase in sample size may improve linkage detection for human complex traits.

Linkage and association of the CA repeat polymorphism of the IL6 gene, obesity-related phenotypes, and bone mineral density (BMD) in two independent Caucasian populations.

Genetic factors play an important role in osteoporosis and obesity, two serious public health problems in the world. We investigated the relationships between obesity-related phenotypes, bone mineral density (BMD) and the CA repeat polymorphism of the IL6 gene in two large independent samples using the quantitative transmission disequilibrium test (QTDT). The first sample consisted of 1,816 individuals from 79 multigenerational pedigrees. Each pedigree was identified through a proband with BMD Z-scores

Mutation patterns at dinucleotide microsatellite loci in humans.

Microsatellites are a major type of molecular markers in genetics studies. Their mutational dynamics are not clear. We investigated the patterns and characteristics of 97 mutation events unambiguously identified, from 53 multigenerational pedigrees with 630 subjects, at 362 autosomal dinucleotide microsatellite loci. A size-dependent mutation bias (in which long alleles are biased toward contraction, whereas short alleles are biased toward expansion) is observed. There is a statistically significant negative relationship between the magnitude (repeat numbers changed during mutation) and direction (contraction or expansion) of mutations and standardized allele size. Contrasting with earlier findings in humans, most mutation events (63%) in our study are multistep events that involve changes of more than one repeat unit. There was no correlation between mutation rate and recombination rate. Our data indicate that mutational dynamics at microsatellite loci are more complicated than the generalized stepwise mutation models.