Ultrahigh-Efficiency Superior Energy Storage in Lead-Free Films with a Simple Composition.

Dielectric capacitors are highly desired in modern electronic devices and power systems to store and recycle electric energy. However, achieving simultaneous high energy density and efficiency remains a challenge. Here, guided by theoretical and phase-field simulations, we are able to achieve a superior comprehensive property of ultrahigh efficiency of 90-94% and high energy density of 85-90 J cm-3 remarkably in strontium titanate (SrTiO3), a linear dielectric of a simple chemical composition, by manipulating local symmetry breaking through introducing Ti/O defects. Atomic-scale characterizations confirm that these Ti/O defects lead to local symmetry breaking and local lattice strains, thus leading to the formation of the isolated ultrafine polar nanoclusters with varying sizes from 2 to 8 nm. These nanoclusters account for both considerable dielectric polarization and negligible polarization hysteresis. The present study opens a new realm of designing high-performance dielectric capacitors utilizing a large family of readily available linear dielectrics with very simple chemistry.

Superfine Nanodomain Engineering Unleashing Ferroelectricity in Incipient Ferroelectrics.

Incipient ferroelectrics have emerged as an attractive class of functional materials owing to their potential to be engineered for exotic ferroelectric behavior, holding great promise for expanding the ferroelectric family. However, thus far, their artificially engineered ferroelectricity has fallen far short of rivaling classic ferroelectrics. In this study, we address this challenge by developing a superfine nanodomain engineering strategy. By applying this approach to representative incipient ferroelectric of SrTiO3-based films, we achieve unprecedentedly strong ferroelectricity, not only surpassing previous records for incipient ferroelectrics but also being comparable to classic ferroelectrics. The remanent polarization of the thin film reaches up to 17.0 µC cm-2 with an ultrahigh Curie temperature of 973 K. Atomic-scale investigations elucidate the origin of this robust ferroelectricity in the emergent high-density superfine nanodomains spanning merely 3-10 unit cells. Combining experimental results with theoretical assessments, we unveil the underlying mechanism, where the intentionally introduced diluted foreign Fe element creates a deeper Landau energy well and promotes a short-range ordering of polarization. Our developed strategy significantly streamlines the design of unconventional ferroelectrics, providing a versatile pathway for exploring new and superior ferroelectric materials.

High-Temperature Ferroic Glassy States in SrTiO_{3}-Based Thin Films.

Disordered ferroics hold great promise for next-generation magnetoelectric devices because their lack of symmetry constraints implies negligible hysteresis with low energy costs. However, the transition temperature and the magnitude of polarization and magnetization are still too low to meet application requirements. Here, taking the prototype perovskite of SrTiO_{3} as an instance, we realize a coexisting spin and dipole reentrant glass states in SrTiO_{3} homoepitaxial films via manipulation of local symmetry. Room-temperature saturation magnetization and spontaneous polarization reach ∼ 10 emu/cm^{3} and ∼ 25 µC/cm^{2}, respectively, with high transition temperatures (101 K and 236 K for spin and dipole glass temperatures and 556 K and 1100 K for Curie temperatures, respectively). Our atomic-scale investigation points out an underlying mechanism, where the Ti/O-defective unit cells break the local translational and orbital symmetry to drive the formation of unusual slush states. This study advances our understanding of the nature of the intricate couplings of ferroic glasses. Our approach could be applied to numerous perovskite oxides for the simultaneous control of the local magnetic and polar orderings and for the exploration of the underlying physics.

Carbon Dioxide Reduction on Transition Metal Dichalcogenides with Ni and Cu Edge Doping: A Density-Functional Theory Study.

Transition-metal dichalcogenides (TMDs) have promising properties for their use as catalysts of CO2 reduction to methane via the Sabatier reaction. In this article we use density-functional theory calculations to gain insight into the energetics of this reaction for Mo/W-based and S/Se-based TMDs with non-, Ni- and Cu-doping. We show that sulfur-based TMDs with Ni/Cu doping exhibit better indicators for catalytic performance of the CO2 reduction reaction than non-doped and doped TMDs without active sites. In addition, the role of the transition metal was found to a much smaller influence in the reaction than the role of the chalcogen and dopant atoms, which influence the bonding strength and type, respectively.

The Mean Inner Potential of Hematite α-Fe2O3 Across the Morin Transition.

We measure the mean inner potential (MIP) of hematite, α-Fe2O3, using electron holography and transmission electron microscopy. Since the MIP is sensitive to valence electrons, we propose its use as a chemical bonding parameter for solids. Hematite can test the sensitivity of the MIP as a bonding parameter because of the Morin magnetic phase transition. Across this transition temperature, no change in the corundum crystal structure can be distinguished, while a change in hybridized Fe-3d and O-2p states was reported, affecting ionic bonding. For a given crystallographic phase, the change in the MIP with temperature is expected to be minor due to thermal expansion. Indeed, we measure the temperature dependence in corundum α-Al2O3(112¯0) between 95 and 295 K showing a constant MIP value of ∼16.8 V within the measurement accuracy of 0.45 V. Thus, our objectives are as follows: measure the MIP of hematite as a function of temperature and examine the sensitivity of the MIP as a bonding parameter for crystals. Measured MIPs of α-Fe2O3(112¯0) above the Morin transition are equal, 17.85 ± 0.50 V, 17.93 ± 0.50 V, at 295 K, 230 K, respectively. Below the Morin transition, at 95 K, a significant reduction of ∼1.3 V is measured to 16.56 ± 0.46 V. We show that this reduction follows charge redistribution resulting in increased ionic bonding.

Mapping Charge Distribution in Single PbS Core - CdS Arm Nano-Multipod Heterostructures by Off-Axis Electron Holography.

We synthesized PbS core-CdS arm nanomultipod heterostructures (NMHs) that exhibit PbS{111}/CdS{0002} epitaxial relations. The PbS-CdS interface is chemically sharp as determined by aberration corrected transmission electron microscopy (TEM) and compared to density functional theory (DFT) calculations. Ensemble fluorescence measurements show quenching of the optical signal from the CdS arms indicating charge separation due to the heterojunction with PbS. A finite-element three-dimensional (3D) calculation of the Poisson equation shows a type-I heterojunction, which would prevent recombination in the CdS arm after optical excitation. To examine charge redistribution, we used off-axis electron holography (OAEH) in the TEM to map the electrostatic potential across an individual heterojunction. Indeed, a built-in potential of 500 mV is estimated across the junction, though as opposed to the thermal equilibrium calculations significant accumulation of positive charge at the CdS side of the interface is detected. We conclude that the NMH multipod geometry prevents efficient removal of generated charge carriers by the high energy electrons of the TEM. Simulations of generated electron-hole pairs in the insulated CdS arm of the NMH indeed show charge accumulation in agreement with the experimental measurements. Thus, we show that OAEH can be used as a complementary methodology to ensemble measurements by mapping the charge distribution in single NMHs with complex geometries.

Superior Piezo-/Ferro-Electricity in Antiferroelectric AgxNbO3-δ Thin Films by Nanopillar Local Structure Design.

Antiferroelectrics are fundamental mother compounds critical in developing innovative lead-free piezoelectrics and ferroelectrics and hold great promise for wide-ranging applications in energy conversion and electronic devices. However, harnessing their superior properties presents a significant challenge due to the delicate balance required between their various states. In this study, through the unique design of nanopillar structures to alleviate the local polar heterogeneity, we have achieved significantly improved piezo-/ferro-electricity in classic lead-free antiferroelectric AgxNbO3-δ (x = 1, 0.9, and 0.8) epitaxial thin films. The effective piezoelectric coefficient reaches 440 pm V-1, 1 order of magnitude larger than the stoichiometric AgNbO3, rivaling classic lead zirconate titanate piezoelectrics. Atomic-scale electron microscopy investigations unravel the underlying mechanisms. The nanopillars, characterized by antisite occupancy of both Ag and Nb atoms and forming out-of-phase boundaries with the matrix, reduce the local crystal symmetry via interphase strain. This leads to the creation of flexible multinanodomain structures that significantly facilitate polarization rotation, thus substantially enhancing the piezoelectric performance. This study demonstrates the feasibility of engineering local heterogeneity through nanopillar design, offering a generally applicable method for property improvement of a wide range of antiferroelectrics.

Ferroelectric domains in multiferroic BiFeO3 films under epitaxial strains.

First-principles calculations are performed to investigate energetic and atomistic characteristics of ferroelectric domains walls (DWs) of BiFeO(3) (BFO) films subject to compressive strain. Significantly lower DW energies than those previously reported, and a different energetic hierarchy between the various DW types, are found for small strains. In all investigated cases (corresponding to ideal angles of 71°, 109°, and 180° formed by the domain polarizations), the DW energy reaches its maximum value for misfit strains that are around the critical strain at which the transition between the R-like and T-like phases occurs in single-domain BFO. Near these strains, several quantities depend strongly on the type of domain wall; such distinct behavior is associated with an elastic difference and a large out-of-plane polarization at the DW in the 180° case. A further increase of the magnitude of the strain leads to (i) a change of hierarchy of the DW energies, (ii) large out-of-plane polarizations inside each up and down domain, and (iii) novel atomic arrangements at the domain walls. Our study can thus initiate a new research direction, namely strain engineering of domain-wall functionalities.

Tungsten Oxide Mediated Quasi-van der Waals Epitaxy of WS2 on Sapphire.

Conventional epitaxy plays a crucial role in current state-of-the art semiconductor technology, as it provides a path for accurate control at the atomic scale of thin films and nanostructures, to be used as the building blocks in nanoelectronics, optoelectronics, sensors, etc. Four decades ago, the terms "van der Waals" (vdW) and "quasi-vdW (Q-vdW) epitaxy" were coined to explain the oriented growth of vdW layers on 2D and 3D substrates, respectively. The major difference with conventional epitaxy is the weaker interaction between the epi-layer and the epi-substrates. Indeed, research on Q-vdW epitaxial growth of transition metal dichalcogenides (TMDCs) has been intense, with oriented growth of atomically thin semiconductors on sapphire being one of the most studied systems. Nonetheless, there are some striking and not yet understood differences in the literature regarding the orientation registry between the epi-layers and epi-substrate and the interface chemistry. Here we study the growth of WS2 via a sequential exposure of the metal and the chalcogen precursors in a metal-organic chemical vapor deposition (MOCVD) system, introducing a metal-seeding step prior to the growth. The ability to control the delivery of the precursor made it possible to study the formation of a continuous and apparently ordered WO3 mono- or few-layer at the surface of a c-plane sapphire. Such an interfacial layer is shown to strongly influence the subsequent quasi-vdW epitaxial growth of the atomically thin semiconductor layers on sapphire. Hence, here we elucidate an epitaxial growth mechanism and demonstrate the robustness of the metal-seeding approach for the oriented formation of other TMDC layers. This work may enable the rational design of vdW and quasi-vdW epitaxial growth on different material systems.

Ferroelectricity in layered bismuth oxide down to 1 nanometer.

Atomic-scale ferroelectrics are of great interest for high-density electronics, particularly field-effect transistors, low-power logic, and nonvolatile memories. We devised a film with a layered structure of bismuth oxide that can stabilize the ferroelectric state down to 1 nanometer through samarium bondage. This film can be grown on a variety of substrates with a cost-effective chemical solution deposition. We observed a standard ferroelectric hysteresis loop down to a thickness of ~1 nanometer. The thin films with thicknesses that range from 1 to 4.56 nanometers possess a relatively large remanent polarization from 17 to 50 microcoulombs per square centimeter. We verified the structure with first-principles calculations, which also pointed to the material being a lone pair-driven ferroelectric material. The structure design of the ultrathin ferroelectric films has great potential for the manufacturing of atomic-scale electronic devices.

Unidirectional rotation of micromotors on water powered by pH-controlled disassembly of chiral molecular crystals.

Biological and synthetic molecular motors, fueled by various physical and chemical means, can perform asymmetric linear and rotary motions that are inherently related to their asymmetric shapes. Here, we describe silver-organic micro-complexes of random shapes that exhibit macroscopic unidirectional rotation on water surface through the asymmetric release of cinchonine or cinchonidine chiral molecules from their crystallites asymmetrically adsorbed on the complex surfaces. Computational modeling indicates that the motor rotation is driven by a pH-controlled asymmetric jet-like Coulombic ejection of chiral molecules upon their protonation in water. The motor is capable of towing very large cargo, and its rotation can be accelerated by adding reducing agents to the water.

Strain engineering magnetic frustration in perovskite oxide thin films.

Our first-principles results show that geometric frustration can be induced in thin films of multiferroic BiFeO(3). We find that competing magnetic interactions occur in the so-called supertetragonal phase of this material, which can be grown on strongly compressive substrates. We show that the frustration level can be tuned by appropriately choosing the substrate; in fact, the phase diagram of the films presents a critical line at which the three-dimensional spin order gets annihilated. We argue that these effects are not exclusive to BiFeO(3) and predict that they also occur in BiCoO(3).

First-principles investigation of morphotropic transitions and phase-change functional responses in BiFeO3-BiCoO3 multiferroic solid solutions.

We present an ab initio study of the BFCO solid solution formed by multiferroics BiFeO(3) (BFO) and BiFeO(3) (BCO). We find that BFCO presents a strongly discontinuous morphotropic transition between BFO-like and BCO-like ferroelectric phases. Further, for all compositions such phases remain (meta)stable and retain well-differentiated properties. Our results thus suggest that an electric field can be used to switch between these structures and show that such a switching involves large phase-change effects of various types, including piezoelectric, electric, and magnetoelectric ones.

Measuring the mean inner potential of Al2O3 sapphire using off-axis electron holography.

The mean inner potential (MIP) of a single crystal α-Al2O3 sapphire was measured using off-axis electron holography. To measure the MIP, we use mechanically polished wedge specimens for transmission electron microscopy (TEM). This approach also enabled us to measure the plasmon mean free path for inelastic scattering (IMFP). The wedge specimen, chosen here at an angle of approximately 45°, allows to determine the MIP by measuring the gradient of phase variations of the reconstructed electron wave over extended regions across the sample. The angle of the wedge was measured to an accuracy of better than 1° by two methods: first, perpendicular sectioning in a focused ion beam for direct measurement by TEM and second, by a non-destructive approach of confocal optical microscopy. The validity of this methodology was examined on a single crystal Si(001) sample showing that the mechanically polished wedge approach can be applied to a wide range of materials. Our measurements concluded that the MIP of sapphire is V0 = 16.90 ±â€¯0.36 V. Furthermore, the IMFP of sapphire was measured at 136 ±â€¯2 nm for 197 keV electrons with a collection angle of 18mrad. The measured MIP of sapphire reflects its degree of ionicity, which lies between theoretical calculations based on electron scattering factors of charged and neutral isolated atoms obtained by Dirac-Fock calculations. Our MIP measurements tend to the expected value for this predominantly ionic material. To account for chemical bonding and the role of the crystallographic plane at the surface of the sample, we compared the experimental measurements to density-functional-theory calculations of the MIP. Calculations of α-Al2O3 slabs cut along (0001) and (1-100) planes obtained MIP values of 15.7 V and 16.7 V, respectively.

Giant polarization in super-tetragonal thin films through interphase strain.

Strain engineering has emerged as a powerful tool to enhance the performance of known functional materials. Here we demonstrate a general and practical method to obtain super-tetragonality and giant polarization using interphase strain. We use this method to create an out-of-plane-to-in-plane lattice parameter ratio of 1.238 in epitaxial composite thin films of tetragonal lead titanate (PbTiO3), compared to 1.065 in bulk. These thin films with super-tetragonal structure possess a giant remanent polarization, 236.3 microcoulombs per square centimeter, which is almost twice the value of known ferroelectrics. The super-tetragonal phase is stable up to 725°C, compared to the bulk transition temperature of 490°C. The interphase-strain approach could enhance the physical properties of other functional materials.

Multiple structural transitions driven by spin-phonon couplings in a perovskite oxide.

Spin-phonon interactions are central to many interesting phenomena, ranging from superconductivity to magnetoelectric effects. However, they are believed to have a negligible influence on the structural behavior of most materials. For example, magnetic perovskite oxides often undergo structural transitions accompanied by magnetic signatures whose minuteness suggests that the underlying spin-phonon couplings are largely irrelevant. We present an exception to this rule, showing that novel effects can occur as a consequence. Our first-principles calculations reveal that spin-phonon interactions are essential to reproduce the experimental observations on the phase diagram of magnetoelectric multiferroic BiCoO3. Moreover, we predict that, under compression, these couplings lead to an unprecedented temperature-driven double-reentrant sequence of ferroelectric transitions. We propose how to modify BiCoO3 via chemical doping to reproduce such marked effects under ambient conditions, thereby yielding useful multifunctionality.

First-principles calculations for insulators at constant polarization.

We develop an exact formalism for performing first-principles calculations for insulators at fixed electric polarization. As shown by Sai, Rabe, and Vanderbilt (SRV) [Phys. Rev. B 66, 104108 (2002)], who designed an approximate method to tackle the same problem, such an approach allows one to map out the energy landscape as a function of polarization, providing a powerful tool for the theoretical investigation of polar materials. We apply our method to a system in which the ionic contribution to the polarization dominates (a broken-inversion-symmetry perovskite), one in which this is not the case (a III-V semiconductor), and one in which an additional degree of freedom plays an important role (a ferroelectric phase of KNO3). We find that while the SRV method gives rather accurate results in the first case, the present approach provides important improvements to the physical description in the latter cases.

Wannier-based definition of layer polarizations in perovskite superlattices.

In insulators, the method of Marzari and Vanderbilt [Phys. Rev. B 56, 12 847 (1997)] can be used to generate maximally localized Wannier functions whose centers are related to the electronic polarization. In the case of layered insulators, this approach can be adapted to provide a natural definition of the local polarization associated with each layer, based on the locations of the nuclear charges and one-dimensional Wannier centers comprising each layer. Here, we use this approach to compute and analyze layer polarizations of ferroelectric perovskite superlattices, including changes in layer polarizations induced by sublattice displacements (i.e., layer-decomposed Born effective charges) and local symmetry breaking at the interfaces. The method provides a powerful tool for analyzing the polarization-related properties of complex layered oxide systems.