Dose-escalated simultaneous integrated boost radiotherapy in early breast cancer (IMPORT HIGH): a multicentre, phase 3, non-inferiority, open-label, randomised controlled trial.

BACKGROUND: A tumour-bed boost delivered after whole-breast radiotherapy increases local cancer-control rates but requires more patient visits and can increase breast hardness. IMPORT HIGH tested simultaneous integrated boost against sequential boost with the aim of reducing treatment duration while maintaining excellent local control and similar or reduced toxicity. METHODS: IMPORT HIGH is a phase 3, non-inferiority, open-label, randomised controlled trial that recruited women after breast-conserving surgery for pT1-3pN0-3aM0 invasive carcinoma from radiotherapy and referral centres in the UK. Patients were randomly allocated to receive one of three treatments in a 1:1:1 ratio, with computer-generated random permuted blocks used to stratify patients by centre. The control group received 40 Gy in 15 fractions to the whole breast and 16 Gy in 8 fractions sequential photon tumour-bed boost. Test group 1 received 36 Gy in 15 fractions to the whole breast, 40 Gy in 15 fractions to the partial breast, and 48 Gy in 15 fractions concomitant photon boost to the tumour-bed volume. Test group 2 received 36 Gy in 15 fractions to the whole breast, 40 Gy in 15 fractions to the partial breast, and 53 Gy in 15 fractions concomitant photon boost to the tumour-bed volume. The boost clinical target volume was the clip-defined tumour bed. Patients and clinicians were not masked to treatment allocation. The primary endpoint was ipsilateral breast tumour relapse (IBTR) analysed by intention to treat; assuming 5% 5-year incidence with the control group, non-inferiority was predefined as 3% or less absolute excess in the test groups (upper limit of two-sided 95% CI). Adverse events were assessed by clinicians, patients, and photographs. This trial is registered with the ISRCTN registry, ISRCTN47437448, and is closed to new participants. FINDINGS: Between March 4, 2009, and Sept 16, 2015, 2617 patients were recruited. 871 individuals were assigned to the control group, 874 to test group 1, and 872 to test group 2. Median boost clinical target volume was 13 cm3 (IQR 7 to 22). At a median follow-up of 74 months there were 76 IBTR events (20 for the control group, 21 for test group 1, and 35 for test group 2). 5-year IBTR incidence was 1·9% (95% CI 1·2 to 3·1) for the control group, 2·0% (1·2 to 3·2) for test group 1, and 3·2% (2·2 to 4·7) for test group 2. The estimated absolute differences versus the control group were 0·1% (-0·8 to 1·7) for test group 1 and 1·4% (0·03 to 3·8) for test group 2. The upper confidence limit for test group 1 versus the control group indicated non-inferiority for 48 Gy. Cumulative 5-year incidence of clinician-reported moderate or marked breast induration was 11·5% for the control group, 10·6% for test group 1 (p=0·40 vs control group), and 15·5% for test group 2 (p=0·015 vs control group). INTERPRETATION: In all groups 5-year IBTR incidence was lower than the 5% originally expected regardless of boost sequencing. Dose-escalation is not advantageous. 5-year moderate or marked adverse event rates were low using small boost volumes. Simultaneous integrated boost in IMPORT HIGH was safe and reduced patient visits. FUNDING: Cancer Research UK.

Emissions associated with operations of four different additive manufacturing or 3D printing technologies.

In this pilot-scale study, a wide range of potential emissions were evaluated for four types of additive manufacturing (AM) machines. These included material extrusion (using acrylonitrile-butadiene-styrene [ABS]); material jetting (using liquid photopolymer); powder bed fusion (using nylon); and vat photopolymerization (using liquid photopolymer) in an industrial laboratory setting. During isolated operation of AM machines, adjacent area samples were collected for compounds of potential concern (COPCs), including total and individual volatile organic compounds (VOCs), nano- and micron-sized particulate matter, and inorganic gases. A total of 61 compounds were also sampled using a canister followed by gas chromatography and mass spectrometry analysis. Most COPCs were not detected or were measured at concentrations far below relevant occupational exposure limits (OELs) during AM machine operations. Submicron particles, predominantly nanoparticles, were produced during material extrusion printing using ABS at approximately 12,000 particles per cubic centimeter (p cm-3) above background. After subtracting the mean background concentration, the mean concentration for material extrusion printing operations correlated with a calculated emission rate of 2.8 × 1010 p min-1 under the conditions tested. During processing of parts produced using material jetting or powder bed fusion, emissions were generally negligible, although concentrations above background of respirable and total dust were measured during processing of powder bed fusion parts. Results of this pilot-scale study indicate that airborne emissions associated with AM operations are variable, depending on printing and parts handling processes, raw materials, and ventilation characteristics. Although personal samples were not collected in this pilot-scale study, the results can be used to inform future exposure assessments. Based on the results of this evaluation, measurement of submicron particles emitted during material extrusion printing operations and dust associated with handling parts manufactured using powder bed fusion processes should be included in exposure assessments.

Partial-breast radiotherapy after breast conservation surgery for patients with early breast cancer (UK IMPORT LOW trial): 5-year results from a multicentre, randomised, controlled, phase 3, non-inferiority trial.

BACKGROUND: Local cancer relapse risk after breast conservation surgery followed by radiotherapy has fallen sharply in many countries, and is influenced by patient age and clinicopathological factors. We hypothesise that partial-breast radiotherapy restricted to the vicinity of the original tumour in women at lower than average risk of local relapse will improve the balance of beneficial versus adverse effects compared with whole-breast radiotherapy. METHODS: IMPORT LOW is a multicentre, randomised, controlled, phase 3, non-inferiority trial done in 30 radiotherapy centres in the UK. Women aged 50 years or older who had undergone breast-conserving surgery for unifocal invasive ductal adenocarcinoma of grade 1-3, with a tumour size of 3 cm or less (pT1-2), none to three positive axillary nodes (pN0-1), and minimum microscopic margins of non-cancerous tissue of 2 mm or more, were recruited. Patients were randomly assigned (1:1:1) to receive 40 Gy whole-breast radiotherapy (control), 36 Gy whole-breast radiotherapy and 40 Gy to the partial breast (reduced-dose group), or 40 Gy to the partial breast only (partial-breast group) in 15 daily treatment fractions. Computer-generated random permuted blocks (mixed sizes of six and nine) were used to assign patients to groups, stratifying patients by radiotherapy treatment centre. Patients and clinicians were not masked to treatment allocation. Field-in-field intensity-modulated radiotherapy was delivered using standard tangential beams that were simply reduced in length for the partial-breast group. The primary endpoint was ipsilateral local relapse (80% power to exclude a 2·5% increase [non-inferiority margin] at 5 years for each experimental group; non-inferiority was shown if the upper limit of the two-sided 95% CI for the local relapse hazard ratio [HR] was less than 2·03), analysed by intention to treat. Safety analyses were done in all patients for whom data was available (ie, a modified intention-to-treat population). This study is registered in the ISRCTN registry, number ISRCTN12852634. FINDINGS: Between May 3, 2007, and Oct 5, 2010, 2018 women were recruited. Two women withdrew consent for use of their data in the analysis. 674 patients were analysed in the whole-breast radiotherapy (control) group, 673 in the reduced-dose group, and 669 in the partial-breast group. Median follow-up was 72·2 months (IQR 61·7-83·2), and 5-year estimates of local relapse cumulative incidence were 1·1% (95% CI 0·5-2·3) of patients in the control group, 0·2% (0·02-1·2) in the reduced-dose group, and 0·5% (0·2-1·4) in the partial-breast group. Estimated 5-year absolute differences in local relapse compared with the control group were -0·73% (-0·99 to 0·22) for the reduced-dose and -0·38% (-0·84 to 0·90) for the partial-breast groups. Non-inferiority can be claimed for both reduced-dose and partial-breast radiotherapy, and was confirmed by the test against the critical HR being more than 2·03 (p=0·003 for the reduced-dose group and p=0·016 for the partial-breast group, compared with the whole-breast radiotherapy group). Photographic, patient, and clinical assessments recorded similar adverse effects after reduced-dose or partial-breast radiotherapy, including two patient domains achieving statistically significantly lower adverse effects (change in breast appearance [p=0·007 for partial-breast] and breast harder or firmer [p=0·002 for reduced-dose and p<0·0001 for partial-breast]) compared with whole-breast radiotherapy. INTERPRETATION: We showed non-inferiority of partial-breast and reduced-dose radiotherapy compared with the standard whole-breast radiotherapy in terms of local relapse in a cohort of patients with early breast cancer, and equivalent or fewer late normal-tissue adverse effects were seen. This simple radiotherapy technique is implementable in radiotherapy centres worldwide. FUNDING: Cancer Research UK.

Understanding outcomes and toxicological aspects of second generation metal-on-metal hip implants: a state-of-the-art review.

Hip implants have improved the mobility and quality of life in millions of individuals. This review presents the evolution of scientific knowledge regarding the history and understanding of systemic and local metal toxicological concerns of hip implants designs utilizing metal-on-metal (MoM) bearing surfaces used in hip resurfacing arthroplasty (HRA) and total hip arthroplasty (THA). This analysis addresses: (1) the history of the development of MoM hip implants; (2) the clinical and toxicological rationale for introducing second-generation MoM implants in the early 2000s as an alternative to metal-on-polyethylene bearings; (3) the subsequent history regarding success and failure of second-generation MoM devices; (4) a detailed review of the history of MoM toxicology, including carcinogenic potential, metal blood levels, hypersensitivity, and release of wear particles; and (5) a review of local tissue effects and MoM patient management. We have included an analysis of MoM THA and HRA survivorship trends aggregated from over 200 studies. By around 2008, HRA continued to be a challenging procedure with variable success rates, and concurrently, some THA devices began to experience higher than expected revision rates based on annual registry reports. The unexpected THA outcomes and continued challenges with HRA devices prompted many surgeons to question the role of toxicological effects in device performance. Regarding hypersensitivity, while conversion to metal sensitized status in some MoM patients occurs based on the skin patch or lymphocyte transformation testing, there is no evidence of a causal relationship between positive test results and device failure. The weight of evidence indicates that nanoparticles released from MoM implants are cleared from the local synovial space under normal wear conditions. The available data indicate that there are no discernible increases in local or systemic tumors following CoCr alloy implantation. Systemic health effects are rarely reported in MoM implant patients and are unlikely when blood concentrations are below 300 µg/L except when patients have specific risk factors. Over time, patient management evolved to include assays aimed at predicting implant function (blood monitoring) and soft tissue reactions (MRI and ultrasound imaging). Validation of these biomarkers as a diagnostic tool for implant function, patient pain, and, ultimately, implant survival, remains lacking. After the introduction of these biomarkers, differences in implant revision decisions emerged based on imaging abnormalities, increased serum metal ion levels, and overall clinical presentation. Discrepancies in patient management algorithms and the lack of consensus in local biological effects terminology have contributed to variability in reporting incidence, etiology, and dose effects on local tissue responses in MoM implants. This variability has contributed to a debate regarding the benefit or risk of revising asymptomatic patients. Therefore, while toxicological assessments of normal functioning MoM implants indicate that MoM implants are relatively safe because of low wear and clearance of metal, more analysis of revision data is needed in order to best inform patient management decisions, particularly for asymptomatic patients, as well as patients with minor symptoms under consideration for conservative pain management treatments.

Low-cost Kinect Version 2 imaging system for breath hold monitoring and gating: Proof of concept study for breast cancer VMAT radiotherapy.

Voluntary inspiration breath hold (VIBH) for left breast cancer patients has been shown to be a safe and effective method of reducing radiation dose to the heart. Currently, VIBH protocol compliance is monitored visually. In this work, we establish whether it is possible to gate the delivery of radiation from an Elekta linac using the Microsoft Kinect version 2 (Kinect v2) depth sensor to measure a patient breathing signal. This would allow contactless monitoring during VMAT treatment, as an alternative to equipment-assisted methods such as active breathing control (ABC). Breathing traces were acquired from six left breast radiotherapy patients during VIBH. We developed a gating interface to an Elekta linac, using the depth signal from a Kinect v2 to control radiation delivery to a programmable motion platform following patient breathing patterns. Radiation dose to a moving phantom with gating was verified using point dose measurements and a Delta4 verification phantom. 60 breathing traces were obtained with an acquisition success rate of 100%. Point dose measurements for gated deliveries to a moving phantom agreed to within 0.5% of ungated delivery to a static phantom using both a conventional and VMAT treatment plan. Dose measurements with the verification phantom showed that there was a median dose difference of better than 0.5% and a mean (3% 3 mm) gamma index of 92.6% for gated deliveries when using static phantom data as a reference. It is possible to use a Kinect v2 device to monitor voluntary breath hold protocol compliance in a cohort of left breast radiotherapy patients. Furthermore, it is possible to use the signal from a Kinect v2 to gate an Elekta linac to deliver radiation only during the peak inhale VIBH phase.

Improving the efficiency of breast radiotherapy treatment planning using a semi-automated approach.

OBJECTIVES: To reduce treatment planning times while maintaining plan quality through the introduction of semi-automated planning techniques for breast radiotherapy. METHODS: Automatic critical structure delineation was examined using the Smart Probabilistic Image Contouring Engine (SPICE) commercial autosegmentation software (Philips Radiation Oncology Systems, Fitchburg, WI) for a cohort of ten patients. Semiautomated planning was investigated by employing scripting in the treatment planning system to automate segment creation for breast step-and-shoot planning and create objectives for segment weight optimization; considerations were made for three different multileaf collimator (MLC) configurations. Forty patients were retrospectively planned using the script and a planning time comparison performed. RESULTS: The SPICE heart and lung outlines agreed closely with clinician-defined outlines (median Dice Similarity Coefficient > 0.9); median difference in mean heart dose was 0.0 cGy (range -10.8 to 5.4 cGy). Scripted treatment plans demonstrated equivalence with their clinical counterparts. No statistically significant differences were found for target parameters. Minimal ipsilateral lung dose increases were also observed. Statistically significant (P < 0.01) time reductions were achievable for MLCi and Agility MLC (Elekta Ltd, Crawley, UK) plans (median 4.9 and 5.9 min, respectively). CONCLUSIONS: The use of commercial autosegmentation software enables breast plan adjustment based on doses to organs at risk. Semi-automated techniques for breast radiotherapy planning offer modest reductions in planning times. However, in the context of a typical department's breast radiotherapy workload, minor savings per plan translate into greater efficiencies overall.

A preliminary evaluation of immune stimulation following exposure to metal particles and ions using the mouse popliteal lymph node assay.

The objective of this preliminary study was to evaluate the threshold for immune stimulation in mice following local exposure to metal particles and ions representative of normal-functioning cobalt-chromium (CoCr) metal-on-metal (MoM) hip implants. The popliteal lymph node assay (PLNA) was used in this study to assess immune responses in BALB/c mice following treatment with chromium-oxide (Cr2O3) particles, metal salts (CoCl2, CrCl3 and NiCl2), or Cr2O3 particles together with metal salts using single-dose exposures representing approximately 10days (0.000114mg), 19years (0.0800mg), and 40years (0.171mg) of normal implant wear. The immune response elicited following treatment with Cr2O3 particles together with metal salts was also assessed at four additional doses equivalent to approximately 1.5months (0.0005mg), 0.6years (0.0025mg), 2.3years (0.01mg), and 9.3years (0.04mg) of normal implant wear. Mice were injected subcutaneously (50µL) into the right hind foot with the test article, or with the relevant vehicle control. The proliferative response of the draining lymph node cells (LNC) was measured four days after treatment, and stimulation indices (SI) were derived relative to vehicle controls. The PLNA was negative (SI<3) for all Cr2O3 particle doses, and was also negative at the lowest dose of the metal salt mixture, and the lowest four doses of the Cr2O3 particles with metal salt mixture. The PLNA was positive (SI>3) at the highest two doses of the metal salt mixture and the highest three doses of the Cr2O3 particles with the metal salt mixture. The provisional NOAEL and LOAEL values identified in this study for immune activation corresponds to Co and Cr concentrations in the synovial fluid approximately 500 and 2000 times higher than that reported for normal-functioning MoM hip implants, respectively. Overall, these results indicate that normal wear conditions are unlikely to result in immune stimulation in individuals not previously sensitized to metals.

The feasibility of using Microsoft Kinect v2 sensors during radiotherapy delivery.

Consumer-grade distance sensors, such as the Microsoft Kinect devices (v1 and v2), have been investigated for use as marker-free motion monitoring systems for radiotherapy. The radiotherapy delivery environment is challenging for such sen-sors because of the proximity to electromagnetic interference (EMI) from the pulse forming network which fires the magnetron and electron gun of a linear accelerator (linac) during radiation delivery, as well as the requirement to operate them from the control area. This work investigated whether using Kinect v2 sensors as motion monitors was feasible during radiation delivery. Three sensors were used each with a 12 m USB 3.0 active cable which replaced the supplied 3 m USB 3.0 cable. Distance output data from the Kinect v2 sensors was recorded under four condi-tions of linac operation: (i) powered up only, (ii) pulse forming network operating with no radiation, (iii) pulse repetition frequency varied between 6 Hz and 400 Hz, (iv) dose rate varied between 50 and 1450 monitor units (MU) per minute. A solid water block was used as an object and imaged when static, moved in a set of steps from 0.6 m to 2.0 m from the sensor and moving dynamically in two sinusoidal-like trajectories. Few additional image artifacts were observed and there was no impact on the tracking of the motion patterns (root mean squared accuracy of 1.4 and 1.1mm, respectively). The sensors' distance accuracy varied by 2.0 to 3.8 mm (1.2 to 1.4 mm post distance calibration) across the range measured; the precision was 1 mm. There was minimal effect from the EMI on the distance calibration data: 0 mm or 1 mm reported distance change (2 mm maximum change at one position). Kinect v2 sensors operated with 12 m USB 3.0 active cables appear robust to the radiotherapy treatment environment.

Airborne asbestos exposures associated with gasket and packing replacement: a simulation study and meta-analysis.

Exposures to airborne asbestos during the removal and installation of internal gaskets and packing associated with a valve overhaul were characterized and compared to published data according to different variables (e.g., product, equipment, task, tool, setting, duration). Personal breathing zone and area samples were collected during twelve events simulating gasket and packing replacement, clean-up and clothing handling. These samples were analyzed using PCM and TEM methods and PCM-equivalent (PCME) airborne asbestos concentrations were calculated. A meta-analysis was performed to compare these data with airborne asbestos concentrations measured in other studies involving gaskets and packing. Short-term mechanic and assistant airborne asbestos concentrations during valve work averaged 0.013f/cc and 0.008f/cc (PCME), respectively. Area samples averaged 0.008f/cc, 0.005f/cc, and 0.003f/cc (PCME) for center, bystander, and remote background, respectively. Assuming a tradesman conservatively performs 1-3 gasket and/or packing replacements daily, an average 8-h TWA was estimated to be 0.002-0.010f/cc (PCME). Combining these results in a meta-analysis of the published exposure data showed that the majority of airborne asbestos exposures during work with gaskets and packing fall within a consistent and low range. Significant differences in airborne concentrations were observed between power versus manual tools and removal versus installation tasks. Airborne asbestos concentrations resulting from gasket and packing work during a valve overhaul are consistent with historical exposure data on replacement of asbestos-containing gasket and packing materials involving multiple variables and, in nearly all plausible scenarios, result in average airborne asbestos concentrations below contemporaneous occupational exposure limits for asbestos.

Reproducibility in Radiomics: A Comparison of Feature Extraction Methods and Two Independent Datasets.

Radiomics involves the extraction of information from medical images that are not visible to the human eye. There is evidence that these features can be used for treatment stratification and outcome prediction. However, there is much discussion about the reproducibility of results between different studies. This paper studies the reproducibility of CT texture features used in radiomics, comparing two feature extraction implementations, namely the MATLAB toolkit and Pyradiomics, when applied to independent datasets of CT scans of patients: (i) the open access RIDER dataset containing a set of repeat CT scans taken 15 min apart for 31 patients (RIDER Scan 1 and Scan 2, respectively) treated for lung cancer; and (ii) the open access HN1 dataset containing 137 patients treated for head and neck cancer. Gross tumor volume (GTV), manually outlined by an experienced observer available on both datasets, was used. The 43 common radiomics features available in MATLAB and Pyradiomics were calculated using two intensity-level quantization methods with and without an intensity threshold. Cases were ranked for each feature for all combinations of quantization parameters, and the Spearman's rank coefficient, rs, calculated. Reproducibility was defined when a highly correlated feature in the RIDER dataset also correlated highly in the HN1 dataset, and vice versa. A total of 29 out of the 43 reported stable features were found to be highly reproducible between MATLAB and Pyradiomics implementations, having a consistently high correlation in rank ordering for RIDER Scan 1 and RIDER Scan 2 (rs > 0.8). 18/43 reported features were common in the RIDER and HN1 datasets, suggesting they may be agnostic to disease site. Useful radiomics features should be selected based on reproducibility. This study identified a set of features that meet this requirement and validated the methodology for evaluating reproducibility between datasets.

One versus three weeks hypofractionated whole breast radiotherapy for early breast cancer treatment: the FAST-Forward phase III RCT.

Background: FAST-Forward aimed to identify a 5-fraction schedule of adjuvant radiotherapy delivered in 1 week that was non-inferior in terms of local cancer control and as safe as the standard 15-fraction regimen after primary surgery for early breast cancer. Published acute toxicity and 5-year results are presented here with other aspects of the trial. Design: Multicentre phase III non-inferiority trial. Patients with invasive carcinoma of the breast (pT1-3pN0-1M0) after breast conservation surgery or mastectomy randomised (1 : 1 : 1) to 40 Gy in 15 fractions (3 weeks), 27 Gy or 26 Gy in 5 fractions (1 week) whole breast/chest wall (Main Trial). Primary endpoint was ipsilateral breast tumour relapse; assuming 2% 5-year incidence for 40 Gy, non-inferiority pre-defined as < 1.6% excess for 5-fraction schedules (critical hazard ratio = 1.81). Normal tissue effects were assessed independently by clinicians, patients and photographs. Sub-studies: Two acute skin toxicity sub-studies were undertaken to confirm safety of the test schedules. Primary endpoint was proportion of patients with grade ≥ 3 acute breast skin toxicity at any time from the start of radiotherapy to 4 weeks after completion. Nodal Sub-Study patients had breast/chest wall plus axillary radiotherapy testing the same three schedules, reduced to the 40 and 26 Gy groups on amendment, with the primary endpoint of 5-year patient-reported arm/hand swelling. Limitations: A sequential hypofractionated or simultaneous integrated boost has not been studied. Participants: Ninety-seven UK centres recruited 4096 patients (1361:40 Gy, 1367:27 Gy, 1368:26 Gy) into the Main Trial from November 2011 to June 2014. The Nodal Sub-Study recruited an additional 469 patients from 50 UK centres. One hundred and ninety and 162 Main Trial patients were included in the acute toxicity sub-studies. Results: Acute toxicity sub-studies evaluable patients: (1) acute grade 3 Radiation Therapy Oncology Group toxicity reported in 40 Gy/15 fractions 6/44 (13.6%); 27 Gy/5 fractions 5/51 (9.8%); 26 Gy/5 fractions 3/52 (5.8%). (2) Grade 3 common toxicity criteria for adverse effects toxicity reported for one patient. At 71-month median follow-up in the Main Trial, 79 ipsilateral breast tumour relapse events (40 Gy: 31, 27 Gy: 27, 26 Gy: 21); hazard ratios (95% confidence interval) versus 40 Gy were 27 Gy: 0.86 (0.51 to 1.44), 26 Gy: 0.67 (0.38 to 1.16). With 2.1% (1.4 to 3.1) 5-year incidence ipsilateral breast tumour relapse after 40 Gy, estimated absolute differences versus 40 Gy (non-inferiority test) were -0.3% (-1.0-0.9) for 27 Gy (p = 0.0022) and -0.7% (-1.3-0.3) for 26 Gy (p = 0.00019). Five-year prevalence of any clinician-assessed moderate/marked breast normal tissue effects was 40 Gy: 98/986 (9.9%), 27 Gy: 155/1005 (15.4%), 26 Gy: 121/1020 (11.9%). Across all clinician assessments from 1 to 5 years, odds ratios versus 40 Gy were 1.55 (1.32 to 1.83; p < 0.0001) for 27 Gy and 1.12 (0.94-1.34; p = 0.20) for 26 Gy. Patient and photographic assessments showed higher normal tissue effects risk for 27 Gy versus 40 Gy but not for 26 Gy. Nodal Sub-Study reported no arm/hand swelling in 80% and 77% in 40 Gy and 26 Gy at baseline, and 73% and 76% at 24 months. The prevalence of moderate/marked arm/hand swelling at 24 months was 10% versus 7% for 40 Gy compared with 26 Gy. Interpretation: Five-year local tumour incidence and normal tissue effects prevalence show 26 Gy in 5 fractions in 1 week is a safe and effective alternative to 40 Gy in 15 fractions for patients prescribed adjuvant local radiotherapy after primary surgery for early-stage breast cancer. Future work: Ten-year Main Trial follow-up is essential. Inclusion in hypofractionation meta-analysis ongoing. A future hypofractionated boost trial is strongly supported. Trial registration: FAST-Forward was sponsored by The Institute of Cancer Research and was registered as ISRCTN19906132. Funding: This award was funded by the National Institute for Health and Care Research (NIHR) Health Technology Assessment programme (NIHR award ref: 09/01/47) and is published in full in Health Technology Assessment; Vol. 27, No. 25. See the NIHR Funding and Awards website for further award information.

Patients diagnosed with early breast cancer are often recommended to have radiotherapy after surgery because research has shown that it lowers the risk of the cancer returning. However, it may cause some short- and long-term side effects. Previous clinical trials showed that the same, or even better, outcomes with a lower total dose of radiotherapy given in fewer, larger daily doses compared with older historical treatment schedules. The National Institute for Health and Care Research Health Technology Assessment Programme-funded FAST-Forward Trial aimed to see whether the number of doses could be reduced further without reducing the beneficial effects of radiotherapy. Between November 2011 and June 2014, 4096 patients agreed to take part in the FAST-Forward Main Trial testing three schedules of radiotherapy to the breast. Standard treatment given on 15 days over 3 weeks (Control Group) was compared with two different lower dose schedules where treatment was given on 5 days over 1 week (lower dose Test Groups). An additional 469 patients entered a sub-study where the gland area under the arm also received radiotherapy (Nodal Sub-Study). Main Trial 5-year results reported in April 2020 showed that the number of patients whose cancer had returned in the treated breast was low in all groups: around 2 in 100 (2.1%) for the Control Group, and 1.7% in the higher dose and 1.4% in the lower dose Test Groups. The majority of reported side effects assessed by patients and doctors up to 5 years after radiotherapy were mild for all treatment groups. Patients in the Control Group and in the lower dose Test Group experienced similar levels of side effects. More side effects were reported in the higher dose Test Group, although differences were small. Overall, the FAST-Forward findings suggest that the lower dose 1-week schedule gave similar results in terms of the cancer returning and side effects to the standard 3-week treatment and this schedule can now be used to help treat future patients.

Evaluation of take home (para-occupational) exposure to asbestos and disease: a review of the literature.

The potential for para-occupational (or "take-home") exposure to a number of chemicals has been recognized for over 60 years. We conducted a literature review in order to characterize reported cases of asbestos-related disease among household contacts of workers occupationally exposed to asbestos. Over 200 published articles were evaluated. Nearly 60 articles described cases of asbestos-related disease thought to be caused by para-occupational exposure. Over 65% of these cases were in persons who lived with workers classified as miners, shipyard workers, insulators, or others involved in the manufacturing of asbestos-containing products, with nearly all remaining workers identified as craftsmen. 98% of the available lung samples of the persons with diseases indicated the presence of amphibole asbestos. Eight studies provided airborne asbestos concentrations during (i) handling of clothing contaminated with asbestos during insulation work or simulated use of friction products; (ii) ambient conditions in the homes of asbestos miners; and (iii) wearing previously contaminated clothing. This review indicates that the literature is dominated by case reports, the majority of which involved household contacts of workers in industries characterized, generally, by high exposures to amphiboles or mixed mineral types. The available data do not implicate chrysotile as a significant cause of disease for household contacts. Also, our analysis indicates that there is insufficient information in the published literature that would allow one to relate airborne asbestos concentrations in a workplace to those that would be generated from subsequent handling of contact with clothing that had been contaminated in that environment. Ideally, a simulation study could be conducted in the future to better understand the relationships between the airborne concentrations in the workplace and the fiber characteristics that influence retention on fabric, as well as the concentrations that can be generated by handling the contaminated clothing by the persons in the home.

Evaluation of bystander exposures to asbestos in occupational settings: a review of the literature and application of a simple eddy diffusion model.

This article presents a review of the publicly available information as it relates to airborne asbestos concentrations at varying distances from a source in an occupational environment. Personal and area samples collected 5-75 feet from the primary worker from workplace surveys conducted in the 1970s and area samples collected 5-50 feet from the primary worker during more recent simulation studies were identified, compiled, and analyzed. As expected, airborne asbestos concentrations generally decreased with distance from the worker who performed a given task. Based on this review, however, the authors found that no systematic research to quantitatively relate fiber concentration with distance from the source (including consideration of fiber length, dilution ventilation, and initial momentum of the particle) has been conducted to date. A simple mathematical model was therefore used, and the results were considered, along with available published data comparing exposure data for both workers and persons/areas near workers. From this analysis, the authors offer guidance for estimating airborne asbestos concentrations at distance from a source. Based on the available data and our modeling results, the authors propose the following approach as a rule of thumb: for persons 1-5 feet from the source, airborne asbestos concentrations can be roughly approximated at 50% of the source concentration; 35% at >5-10 feet, 10% for >10-30 feet, and less than 1% at distances greater than 30 feet. This approach should be helpful for bracketing the range of likely exposures to bystanders being evaluated in asbestos-related dose-reconstruction analyses.

An independent review and prioritization of past radionuclide and chemical releases from the Los Alamos National Laboratory--implications for future dose reconstruction studies.

From 1999 through 2010, a team of scientists and engineers systematically reviewed approximately eight million classified and unclassified documents at Los Alamos National Laboratory (LANL) that describe historical off-site releases of radionuclides and chemicals in order to determine the extent to which a full-scale dose reconstruction for releases is warranted and/or feasible. As a part of this effort, a relative ranking of historical airborne and waterborne radionuclide releases from LANL was established using priority index (PI) values that were calculated from estimated annual quantities released and the maximum allowable effluent concentrations according to The U.S. Nuclear Regulatory Commission (USNRC). Chemical releases were ranked based on annual usage estimates and U.S. Environmental Protection Agency (USEPA) toxicity values. PI results for airborne radionuclides indicate that early plutonium operations were of most concern between 1948 and 1961, in 1967, and again from 1970 through 1973. Airborne releases of uranium were found to be of most interest for 1968, from 1974 through 1978, and again in 1996. Mixed fission products yielded the highest PI value for 1969. Mixed activation product releases yielded the highest PI values from 1979 to 1995. For waterborne releases, results indicate that plutonium is of most concern for all years evaluated with the exception of 1956 when (90)Sr yielded the highest PI value. The prioritization of chemical releases indicate that four of the top five ranked chemicals were organic solvents that were commonly used in chemical processing and for cleaning. Trichloroethylene ranked highest, indicating highest relative potential for health effects, for both cancer and non-cancer effects. Documents also indicate that beryllium was used in significant quantities, which could have lead to residential exposures exceeding established environmental and occupational exposure limits, and warrants further consideration. In part because of the close proximity of residents to LANL, further study of historical LANL releases and the potential impact to public health is recommended for those materials with the largest priority index values; namely, plutonium, uranium, and selected chemicals.

Voluntary versus ABC breath-hold in the context of VMAT for breast and locoregional lymph node radiotherapy including the internal mammary chain.

BACKGROUND: Deep-inspiration breath-hold (DIBH) reduces radiation dose to the heart in patients undergoing locoregional breast radiotherapy. In the context of tangential irradiation of the breast/ chest wall, a voluntary breath hold (vDIBH) technique has been shown to be as reproducible as a machine-assisted breath hold technique using the active breathing co-ordinator (ABC™, Elekta, Crawley, UK, ABC_DIBH). This study compares set-up reproducibility for vDIBH versus ABC_DIBH in patients undergoing volumetric-modulated arc radiotherapy (VMAT) for breast cancer, both with and without wax bolus. METHOD: Patients with breast cancer requiring pan regional lymph node VMAT +/- wax bolus in breath-hold were CT scanned in vDIBH and ABC_DIBH. Patients were randomised to receive one technique for fractions 1-7 and the other for fractions 8-15. Daily cone beam computed tomography (CBCT) was performed and registered to planning-CT using bony anatomy. Within-patient comparisons of mean daily chest wall position were made using a paired t-test. Population, systematic (∑) and random errors (α) were estimated. Intrafraction reproducibility was assessed by comparing chest wall position and diaphragm movement between consecutive breath holds on CBCT. RESULTS: 16 patients were recruited. All completed treatment with both techniques (9 patients with wax bolus, 7 patients without). CBCT derived ∑ were 2.1-6.4 mm (ABC_DIBH) and 2.1-4.9 mm (vDIBH), α were 1.7-2.6 mm (ABC_DIBH) and 2.2-2.7 mm (vDIBH) and mean daily chest wall displacements (MD) were 0.0-1.5 mm (ABC_DIBH) and -0.1-1.6 vDIBH (all p non-significant). Chest wall and diaphragm position was equivalent between consecutive breath holds in ABC and vDIBH (median difference 1.0 mm and 0.8 mm respectively, non p significant) demonstrating equivalent intrafraction reproducibility. CONCLUSION: This study demonstrates that a simple voluntary breath hold technique is feasible in combination with VMAT (+/- bolus) and is as reproducible as ABC_DIBH with VMAT for the irradiation of the breast and axillary and IMC lymph nodes in breast cancer patients.

Ten-Year Results of FAST: A Randomized Controlled Trial of 5-Fraction Whole-Breast Radiotherapy for Early Breast Cancer.

PURPOSE: Previous studies of hypofractionated adjuvant whole-breast radiotherapy for early breast cancer established a 15- or 16-fraction (fr) regimen as standard. The FAST Trial (CRUKE/04/015) evaluated normal tissue effects (NTE) and disease outcomes after 5-fr regimens. Ten-year results are presented. METHODS: Women ≥ 50 years of age with low-risk invasive breast carcinoma (pT1-2 pN0) were randomly assigned to 50 Gy/25 fr (5 weeks) or 30 or 28.5 Gy in 5 once-weekly fr of 6.0 or 5.7 Gy. The primary end point was change in photographic breast appearance at 2 and 5 years; secondary end points were physician assessments of NTE and local tumor control. Odds ratios (ORs) from longitudinal analyses compared regimens. RESULTS: A total of 915 women were recruited from 18 UK centers (2004-2007). Five-year photographs were available for 615/862 (71%) eligible patients. ORs for change in photographic breast appearance were 1.64 (95% CI, 1.08 to 2.49; P = .019) for 30 Gy and 1.10 (95% CI, 0.70 to 1.71; P = .686) for 28.5 Gy versus 50 Gy. α/ß estimate for photographic end point was 2.7 Gy (95% CI, 1.5 to 3.9 Gy), giving a 5-fr schedule of 28 Gy (95% CI, 26 to 30 Gy) estimated to be isoeffective with 50 Gy/25 fr. ORs for any moderate/marked physician-assessed breast NTE (shrinkage, induration, telangiectasia, edema) were 2.12 (95% CI, 1.55 to 2.89; P < .001) for 30 Gy and 1.22 (95% CI, 0.87 to 1.72; P = .248) for 28.5 Gy versus 50 Gy. With 9.9 years median follow-up, 11 ipsilateral breast cancer events (50 Gy: 3; 30 Gy: 4; 28.5 Gy: 4) and 96 deaths (50 Gy: 30; 30 Gy: 33; 28.5 Gy: 33) have occurred. CONCLUSION: At 10 years, there was no significant difference in NTE rates after 28.5 Gy/5 fr compared with 50 Gy/25 fr, but NTE were higher after 30 Gy/5 fr. Results confirm the published 3-year findings that a once-weekly 5-fr schedule of whole-breast radiotherapy can be identified that appears to be radiobiologically comparable for NTE to a conventionally fractionated regimen.

Risk of gastrointestinal disease associated with exposure to pathogens in the water of the Lower Passaic River.

During precipitation events, untreated human sewage is often intentionally discharged to surface water bodies via combined sewer overflow (CSO) systems in order to avoid overloading wastewater treatment plants. The purpose of this analysis was to evaluate the risk of pathogen-related disease associated with CSO discharges into the Lower Passaic River. Concentrations of fecal coliform, total coliform, fecal Streptococcus, and fecal Enterococcus bacteria were measured at six river locations on six different days in 2003 (n = 36). In addition, water samples (n = 2) were collected directly from and in the immediate vicinity of a discharging CSO in Newark, NJ. These samples were analyzed for fecal coliforms, total coliforms, fecal Streptococcus, fecal Enterococcus, Giardia lamblia, Cryptosporidium parvum, and several viruses. Risk estimates for gastrointestinal illness and Giardia infection resulting from indirect and direct ingestion of contaminated water were calculated for three potential exposure scenarios: visitor, recreator, and homeless person. Single-event risk was first evaluated for the three individual exposure scenarios; overall risk was then determined over a 1-year period. Monte Carlo techniques were used to characterize uncertainty. Nearly all of the pathogen concentrations measured in the Passaic River exceeded health-based water quality criteria and in some cases were similar to levels reported for raw sewage. The probability of contracting gastrointestinal illness due to fecal Streptococcus and Enterococcus from incidental ingestion of water over the course of a year ranged from 0.14 to nearly 0.70 for the visitor and recreator scenarios, respectively. For the homeless person exposure scenario, the risk for gastrointestinal illness reached 0.88 for fecal Streptococcus and Enterococcus, while the probability of Giardia infection was 1.0. This risk analysis suggests that, due to the levels of pathogens present in the Lower Passaic River, contact with the water poses, and will continue to pose, significant human health risks until CSO discharges are adequately controlled or abated.

State-of-the-science review of the occupational health hazards of crystalline silica in abrasive blasting operations and related requirements for respiratory protection.

Excessive exposures to airborne crystalline silica have been known for over 100 years to pose a serious health hazard. Work practices and regulatory standards advanced as the knowledge of the hazards of crystalline silica evolved. This article presents a comprehensive historical examination of the literature on exposure, health effects, and personal protective equipment related to silica and abrasive blasting operations over the last century. In the early 1900s, increased death rates and prevalence of pulmonary disease were observed in industries that involved dusty operations. Studies of these occupational cohorts served as the basis for the first occupational exposure limits in the 1930s. Early exposure studies in foundries revealed that abrasive blasting operations were particularly hazardous and provided the basis for many of the engineering control and respiratory protection requirements that are still in place today. Studies involving abrasive blasters over the years revealed that engineering controls were often not completely effective at reducing airborne silica concentrations to a safe level; consequently, respiratory protection has always been an important component of protecting workers. During the last 15-20 yr, quantitative exposure-response modeling, experimental animal studies, and in vitro methods were used to better understand the relationship between exposure to silica and disease in the workplace. In light of Occupational Safety and Health Administration efforts to reexamine the protectiveness of the current permissible exposure limit (PEL) for crystalline silica and its focus on protecting workers who are known to still be exposed to silica in the workplace (including abrasive blasters), this state-of-the-science review of one of the most hazardous operations involving crystalline silica should provide useful background to employers, researchers, and regulators interested in the historical evolution of the recognized occupational health hazards of crystalline silica and abrasive blasting operations and the related requirements for respiratory protection.

Characterization of wear debris from metal-on-metal hip implants during normal wear versus edge-loading conditions.

Advantages of second-generation metal-on-metal (MoM) hip implants include low volumetric wear rates and the release of nanosized wear particles that are chemically inert and readily cleared from local tissue. In some patients, edge loading conditions occur, which result in higher volumetric wear. The objective of this study was to characterize the size, morphology, and chemistry of wear particles released from MoM hip implants during normal (40° angle) and edge-loading (65° angle with microseparation) conditions. The mean primary particle size by volume under normal wear was 35 nm (range: 9-152 nm) compared with 95 nm (range: 6-573 nm) under edge-loading conditions. Hydrodynamic diameter analysis by volume showed that particles from normal wear were in the nano- (<100 nm) to submicron (<1000 nm) size range, whereas edge-loading conditions generated particles that ranged from <100 nm up to 3000-6000 nm in size. Particles isolated from normal wear were primarily chromium (98.5%) and round to oval in shape. Edge-loading conditions generated more elongated particles (4.5%) (aspect ratio ≥ 2.5) and more CoCr alloy particles (9.3%) compared with normal wear conditions (1.3% CoCr particles). By total mass, edge-loading particles contained approximately 640-fold more cobalt than normal wear particles. Our findings suggest that high wear conditions are a potential risk factor for adverse local tissue effects in MoM patients who experience edge loading. This study is the first to characterize both the physical and chemical characteristics of MoM wear particles collected under normal and edge-loading conditions. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 986-996, 2018.

Influence of body habitus on dose parameters of nodal levels III to IV irradiation for breast cancer: comparison of 3 techniques.

This study aimed to investigate the effect of body habitus on supraclavicular (SC) dose-volume histogram (DVH) parameters among breast cancer patients according to 3 different techniques. Three SC irradiation plans were generated for 24 postoperative breast cancer patients: (1) direct antero-posterior field only (1fieldP), with dose prescribed to a 3-cm depth; (2) 3-cm depth plan (3cmP) using an antero-posterior field plus a posterior boost with the dose prescription defined to 3 cm; and (3) optimized plan (OptP) similar to 3cmP, with dose prescribed depending on the anatomy. The OptP plans had the least variation in DVH parameters with body habitus; 3cmP plans were the most varied. Conformity index among normal weight patients were 0.73, 0.78, and 0.87 (p = 0.02) and 0.61, 0.6, and 0.82 among overweight-obese patients for 1fieldP, 3cmP, and OptP, respectively (p < 0.001). V95% of the planning target volume among normal weight patients were 72.63%, 78.03%, and 87.18% for 1fieldP, 3cmP, and OptP, respectively (p = 0.02). The corresponding values among overweight-obese patients were 60.5%, 59.62%, and 81.62%, respectively (p = 0.001). Fixed depth dose prescriptions caused greater SC under dose than plans optimized according to patient's anatomy.