TiO2 Films with Macroscopic Chiral Nematic-Like Structure Stabilized by Copper Promoting Light-Harvesting Capability for Hydrogen Generation.

Cellulose nanocrystals (CNCs) have inspired the synthesis of various advanced nanomaterials, opening opportunities for different applications. However, a simple and robust approach for transferring the long-range chiral nematic nanostructures into TiO2 photocatalyst is still fancy. Herein, a successful fabrication of freestanding TiO2 films maintaining their macroscopic chiral nematic structures after removing the CNCs biotemplate is reported. It is demonstrated that including copper acetate in the sol avoids the epitaxial growth of the lamellar-like structure of TiO2 and stabilizes the chiral nematic structure instead. The experimental results and optical simulation demonstrate an enhancement at the blue and red edges of the Fabry-Pérot reflectance peak located in the visible range. This enhancement arises from the light scattering effect induced by the formation of the chiral nematic structure. The nanostructured films showed 5.3 times higher performance in the photocatalytic hydrogen generation, compared to lamellar TiO2, and benefited from the presence of copper species for charge carriers' separation. This work is therefore anticipated to provide a simple approach for the design of chiral nematic photocatalysts and also offers insights into the electron transfer mechanisms on TiO2/CuxO with variable oxidation states for photocatalytic hydrogen generation.

Bio-Inspired Bimetallic Cooperativity Through a Hydrogen Bonding Spacer in CO2 Reduction.

At the core of carbon monoxide dehydrogenase (CODH) active site two metal ions together with hydrogen bonding scheme from amino acids orchestrate the interconversion between CO2 and CO. We have designed a molecular catalyst implementing a bimetallic iron complex with an embarked second coordination sphere with multi-point hydrogen-bonding interactions. We found that, when immobilized on carbon paper electrode, the dinuclear catalyst enhances up to four fold the heterogeneous CO2 reduction to CO in water with an improved selectivity and stability compared to the mononuclear analogue. Interestingly, quasi-identical catalytic performances are obtained when one of the two iron centers was replaced by a redox inactive Zn metal, questioning the cooperative action of the two metals. Snapshots of X-ray structures indicate that the two metalloporphyrin units tethered by a urea group is a good compromise between rigidity and flexibility to accommodate CO2 capture, activation, and reduction.

Copolymers Derived from Two Active Esters: Synthesis, Characterization, Thermal Properties, and Reactivity in Post-Modification.

Copolymers with two distinguished reactive repeating units are of great interest, as such copolymers might open the possibility of obtaining selective and/or consequent copolymers with different chemical structures and properties. In the present work, copolymers based on two active esters (pentafluorophenyl methacrylate and p-nitrophenyl methacrylate) with varied compositions were synthesized by Cu(0)-mediated reversible deactivation radical polymerization. This polymerization technique allows the preparation of copolymers with high to quantitative conversion of both comonomers, with moderate control over dispersity (D = 1.3-1.7). Additionally, by in-depth study on the composition of each copolymer by various techniques including elemental analysis, NMR, FT-IR, and XPS, it was possible to confirm the coherence between expected and obtained composition. Thermal analyses by DSC and TGA were implemented to investigate the relation between copolymers' composition and their thermal properties. Finally, an evaluation of the difference in reactivity of the two monomer moieties was confirmed by post-modification of copolymers with a primary amine and a primary alcohol as the model.

Chiral Chromium Salen@rGO as Multipurpose and Recyclable Heterogeneous Catalyst.

The first immobilization of a pyrene-tagged chromium salen complex through π-π noncovalent interactions on reduced graphene oxide (rGO) is described. A very robust supported catalytic system is obtained to promote asymmetric catalysis in repeated cycles, without loss of activity or enantioselectivity. This specific behavior was demonstrated in two different catalytic reactions (up to ten reuses) promoted by chromium salen complexes, the cyclohexene oxide ring-opening reaction and the hetero-Diels-Alder cycloaddition between various aldehydes and Danishefsky's diene. Furthermore, the chiral chromium salen@rGO has been found to be compatible with a multi-substrate type use, in which the structure of the substrate involved is modified each time the catalyst is reused.

Photoswitchable 11 nm CsCoFe Prussian Blue Analogue Nanocrystals with High Relaxation Temperature.

Photoswitchable 11 nm nanocrystals with the coordination network Cs{Co[Fe(CN)6]} were obtained using a template-free method. The nanocrystals were recovered from the colloidal solutions as solid materials surrounded by cetyltrimethylammonium (CTA) cations or embedded in the organic polymer polyvinylpyrrolidone (PVP). Complementary magnetic, spectroscopic, and structural techniques, including EPR spectroscopy, reveal a majority (∼70%) of the low-spin and photoactive diamagnetic CoIIIFeII pairs located in the core of the nanocrystals and a mixture of CoIIFeII and CoIIFeIII species present mainly within the shell of the objects. While bulk compounds with similar vacancy concentration do not exhibit noticeable photoinduced charge transfer, the observed photoactivity of the nanocrystals is ascribed to their nanometric size. The relaxation temperature of the photoinduced state shifts upward by ∼55 K when PVP is replaced by CTA. This is ascribed to the larger rigidity of the dense CsCoFe_CTA material, whose metastable state is lower than that for CsCoFe_PVP, leading to a larger relaxation energy barrier and, therefore, to a higher relaxation temperature.

A Facile One-Pot Synthesis of Versatile PEGylated Platinum Nanoflowers and Their Application in Radiation Therapy.

Nanomedicine has stepped into the spotlight of radiation therapy over the last two decades. Nanoparticles (NPs), especially metallic NPs, can potentiate radiotherapy by specific accumulation into tumors, thus enhancing the efficacy while alleviating the toxicity of radiotherapy. Water radiolysis is a simple, fast and environmentally-friendly method to prepare highly controllable metallic nanoparticles in large scale. In this study, we used this method to prepare biocompatible PEGylated (with Poly(Ethylene Glycol) diamine) platinum nanoflowers (Pt NFs). These nanoagents provide unique surface chemistry, which allows functionalization with various molecules such as fluorescent markers, drugs or radionuclides. The Pt NFs were produced with a controlled aggregation of small Pt subunits through a combination of grafted polymers and radiation-induced polymer cross-linking. Confocal microscopy and fluorescence lifetime imaging microscopy revealed that Pt NFs were localized in the cytoplasm of cervical cancer cells (HeLa) but not in the nucleus. Clonogenic assays revealed that Pt NFs amplify the gamma rays induced killing of HeLa cells with a sensitizing enhancement ratio (SER) of 23%, thus making them promising candidates for future cancer radiation therapy. Furthermore, the efficiency of Pt NFs to induce nanoscopic biomolecular damage by interacting with gamma rays, was evaluated using plasmids as molecular probe. These findings show that the Pt NFs are efficient nano-radio-enhancers. Finally, these NFs could be used to improve not only the performances of radiation therapy treatments but also drug delivery and/or diagnosis when functionalized with various molecules.

Radio-Enhancing Properties of Bimetallic Au:Pt Nanoparticles: Experimental and Theoretical Evidence.

The use of nanoparticles, in combination with ionizing radiation, is considered a promising method to improve the performance of radiation therapies. In this work, we engineered mono- and bimetallic core-shell gold-platinum nanoparticles (NPs) grafted with poly (ethylene glycol) (PEG). Their radio-enhancing properties were investigated using plasmids as bio-nanomolecular probes and gamma radiation. We found that the presence of bimetallic Au:Pt-PEG NPs increased by 90% the induction of double-strand breaks, the signature of nanosize biodamage, and the most difficult cell lesion to repair. The radio-enhancement of Au:Pt-PEG NPs were found three times higher than that of Au-PEG NPs. This effect was scavenged by 80% in the presence of dimethyl sulfoxide, demonstrating the major role of hydroxyl radicals in the damage induction. Geant4-DNA Monte Carlo simulations were used to elucidate the physical processes involved in the radio-enhancement. We predicted enhancement factors of 40% and 45% for the induction of nanosize damage, respectively, for mono- and bimetallic nanoparticles, which is attributed to secondary electron impact processes. This work contributed to a better understanding of the interplay between energy deposition and the induction of nanosize biomolecular damage, being Monte Carlo simulations a simple method to guide the synthesis of new radio-enhancing agents.

Self-lubricating, low-friction, wear-resistant Al-based quasicrystalline coatings.

After gas atomization, a quasicrystalline powder based on aluminium was used to prepare a thick coating by high-velocity oxygen-fuel flame torch spraying. This layer was deposited on top of a bond-coat layer on a steel plate. A post-spraying annealing treatment turned the two layers to their stable state, a γ-brass crystal and an icosahedral quasicrystal, respectively. The projection parameters were selected in such a way that the coating behaved like a self-lubricating material, which offered very good wear resistance (duration of pin-on-disk tests superior to 5 km with negligible material loss) and low friction (µ ≤ 6% against sintered tungsten carbide), in contrast to the state of the art. This property was achieved thanks to, on the one hand, excellent bonding to the substrate via the bound coat, and on the other hand, presence at the boundaries between quasicrystalline flakes of a mixture of both threefold and fourfold coordinated carbon originating from spray processing. Application to hard materials used in mechanical devices is appealing, especially because soft, lubricating additives may not be needed, thus considerably increasing the lifetime of the devices and reducing waste of materials.

Radiation-Induced Synthesis and Superparamagnetic Properties of Ferrite Fe3O4 Nanoparticles.

Ultra-small magnetic Fe3O4 nanoparticles are successfully synthesized in basic solutions by using the radiolytic method of the partial reduction in FeIII in the presence of poly-acrylate (PA), or by using the coprecipitation method of FeIII and FeII salts in the presence of PA. The optical, structural, and magnetic properties of the nanoparticles were examined using UV-Vis absorption spectroscopy, high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and SQUID magnetization measurements. The HRTEM and XRD analysis confirmed the formation of ultra-small magnetite nanoparticles in a spinel structure, with a smaller size for radiation-induced particles coated by PA (5.2 nm) than for coprecipitated PA-coated nanoparticles (11 nm). From magnetization measurements, it is shown that the nanoparticles are superparamagnetic at room temperature. The magnetization saturation value Ms = 50.1 A m2 kg-1 of radiation-induced nanoparticles at 60 kGy is higher than Ms = 18.2 A m2 kg-1 for coprecipitated nanoparticles. Both values are compared with nanoparticles coated with other stabilizers in the literature.

Antibacterial Zirconia Surfaces from Organocatalyzed Atom-Transfer Radical Polymerization.

Antibacterial coatings are becoming increasingly attractive for application in the field of biomaterials. In this framework, we developed polymer coating zirconia with antibacterial activity using the "grafting from" methodology. First, 1-(4-vinylbenzyl)-3-butylimidazolium chloride monomer was synthesized. Then, the surface modification of zirconia substrates was performed with this monomer via surface-initiated photo atom transfer radical polymerization for antibacterial activity. X-ray photoelectron spectroscopy, ellipsometry, static contact angle measurements, and an atomic force microscope were used to characterize the films for each step of the surface modification. The results revealed that cationic polymers could be successfully deposited on the zirconia surfaces, and the thickness of the grafted layer steadily increased with polymerization time. Finally, the antibacterial adhesion test was used to evaluate the antibacterial activity of the modified zirconia substrates, and we successfully showed the antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa strains.

Highly Dispersed Ni-Pt Bimetallic Cocatalyst: The Synergetic Effect Yields Pt-Like Activity in Photocatalytic Hydrogen Evolution.

Achieving high photocatalytic activity with the lowest possible platinum (Pt) consumption is crucial for reducing the cost of Pt-based cocatalysts and enabling large-scale applications. Bimetallic Ni-Pt cocatalysts exhibit excellent photocatalytic performance and are considered one of the most promising photocatalysts capable of replacing pure Pt for hydrogen evolution reaction (HER). However, the synergistic photocatalytic mechanism between bimetallic Ni-Pt cocatalysts needs to be further investigated. Herein, we deposit highly dispersed Ni-Pt bimetallic cocatalysts on the surface of TiO2 by radiolytic reduction. We study the dynamics of photogenerated charge carriers of the Ni-Pt-comodified TiO2 and propose their underlying electron transfer mechanisms, in which Pt acts as an electron trap, whereas Ni serves as an electron supplier. The synergistic effect is Ni/Pt ratio-dependent and can confer bimetallic Ni-Pt to pure Pt-like photocatalytic activity in HER. The Ni2-Pt1-comodified TiO2 is optimized to be the most cost-effective photocatalyst with robust stability, which exhibits about 40-fold higher performance than bare TiO2.

One-Step Synthesis of CuxOy/TiO2 Photocatalysts by Laser Pyrolysis for Selective Ethylene Production from Propionic Acid Degradation.

In an effort to produce alkenes in an energy-saving way, this study presents for the first time a photocatalytic process that allows for the obtention of ethylene with high selectivity from propionic acid (PA) degradation. To this end, TiO2 nanoparticles (NPs) modified with copper oxides (CuxOy/TiO2) were synthetised via laser pyrolysis. The atmosphere of synthesis (He or Ar) strongly affects the morphology of photocatalysts and therefore their selectivity towards hydrocarbons (C2H4, C2H6, C4H10) and H2 products. Specifically, CuxOy/TiO2 elaborated under He environment presents highly dispersed copper species and favours the production of C2H6 and H2. On the contrary, CuxOy/TiO2 synthetised under Ar involves copper oxides organised into distinct NPs of ~2 nm diameter and promotes C2H4 as the major hydrocarbon product, with selectivity, i.e., C2H4/CO2 as high as 85% versus 1% obtained with pure TiO2.

Structural Size Effect in Capped Metallic Nanoparticles.

The surfactant used during a colloidal synthesis is known to control the size and shape of metallic nanoparticles. However, its influence on the nanoparticle (NP) structure is still not well understood. In this study, we show that the surfactant can significantly modify the lattice parameter of a crystalline particle. First, our electron diffraction measurements reveals that NiPt nanoparticles around 4 nm in diameter covered by a mixture of oleylamine and oleic acid (50:50) display a lattice parameter expansion around 2% when compared to the same particles without surfactant. Using high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and energy-dispersive X-ray spectroscopy (EDX) techniques, we show that this expansion can not be explained by crystal defects, twinning, oxidation, or atoms insertion. Then, using covered NPs in the 4-22 nm size range, we show that the lattice parameter evolves linearly with the inverse of the NP size, as it is expected when a surface stress is present. Finally, the study is extended to pure nickel and pure platinum NPs, with different sizes, coated by different surfactants (oleylamine, trioctylphosphine, polyvinylpyrrolidone). The surfactants induce lattice parameter variations, whose magnitude could be related to the charge transfer between the surfactant and the particle surface.

A simple and efficient process for the synthesis of 2D carbon nitrides and related materials.

We describe here a new process for the synthesis of very high quality 2D Covalent Organic Frameworks (COFs), such a C2N and CN carbon nitrides. This process relies on the use of a metallic surface as both a reagent and a support for the coupling of small halogenated building blocks. The conditions of the assembly reaction are chosen so as to leave the inorganic salts by-products on the surface, to further confine the assembly reaction on the surface and increase the quality of the 2D layers. We found that under these conditions, the process directly returns few layers material. The structure/quality of these materials is demonstrated by extensive cross-characterizations at different scales, combining optical microscopy, Scanning Electron Microscopy (SEM)/Transmission Electron Microscopy (TEM) and Energy Dispersive Spectroscopy (EDS). The availability of such very large, high-quality layers of these materials opens interesting perspectives, for example in photochemistry and electronics (intrinsic transport properties, high gap substrate for graphene, etc...).

Gold(i)-silver(i)-calix[8]arene complexes, precursors of bimetallic alloyed Au-Ag nanoparticles.

In this paper, we report the first synthesis and characterisations of bimetallic gold(i)-silver(i) calix[8]arene complexes. We show that the radiolytic reduction of these complexes leads to the formation of small bimetallic nanoparticles with an alloyed structure, as evidenced by XPS, HR-TEM and STEM/HAADF-EDX measurements.

Polymerization of glycidyl methacrylate from the surface of cellulose nanocrystals for the elaboration of PLA-based nanocomposites.

Cellulose nanocrystals (CNCs) are used to design nanocomposites because of their high aspect ratio and their outstanding mechanical and barrier properties. However, the low compatibility of hydrophilic CNCs with hydrophobic polymers remains a barrier to their use in the nanocomposite field. To improve this compatibility, poly(glycidyl methacrylate) (PGMA) was grafted from CNCs containing α-bromoisobutyryl moieties via surface-initiated atom transfer radical polymerization. The novelty of this research is the use of a reactive epoxy-containing monomer that can serve as a new platform for further modifications or crosslinking. Polymer-grafted CNC-PGMA-Br prepared at different polymerization times were characterized by XRD, DLS, FTIR, XPS and elemental analysis. Approximately 40 % of the polymer at the surface of the CNCs was quantified after only 1 h of polymerization. Finally, nanocomposites prepared with 10 wt% CNC-PGMA-Br as nanofillers in a poly(lactic acid) (PLA) matrix exhibited an improvement in their compatibilization based on SEM observation.

Green One-Step Synthesis of Medical Nanoagents for Advanced Radiation Therapy.

PURPOSE: Metal-based nanoparticles (M-NPs) have attracted great attention in nanomedicine due to their capacity to amplify and improve the tumor targeting of medical beams. However, their simple, efficient, high-yield and reproducible production remains a challenge. Currently, M-NPs are mainly synthesized by chemical methods or radiolysis using toxic reactants. The waste of time, loss of material and potential environmental hazards are major limitations. MATERIALS AND METHODS: This work proposes a simple, fast and green strategy to synthesize small, non-toxic and stable NPs in water with a 100% production rate. Ionizing radiation is used to simultaneously synthesize and sterilize the containing NPs solutions. The synthesis of platinum nanoparticles (Pt NPs) coated with biocompatible poly(ethylene glycol) ligands (PEG) is presented as proof of concept. The physicochemical properties of NPs were studied by complementary specialized techniques. Their toxicity and radio-enhancing properties were evaluated in a cancerous in vitro model. Using plasmid nanoprobes, we investigated the elementary mechanisms underpinning radio-enhancement. RESULTS AND DISCUSSION: Pt NPs showed nearly spherical-like shapes and an average hydrodynamic diameter of 9 nm. NPs are zero-valent platinum successfully coated with PEG. They were found non-toxic and have the singular property of amplifying cell killing induced by γ-rays (14%) and even more, the effects of carbon ions (44%) used in particle therapy. They induce nanosized-molecular damage, which is a major finding to potentially implement this protocol in treatment planning simulations. CONCLUSION: This new eco-friendly, fast and simple proposed method opens a new era of engineering water-soluble biocompatible NPs and boosts the development of NP-aided radiation therapies.

Hexacyano Ferrate (III) Reduction by Electron Transfer Induced by Plasmonic Catalysis on Gold Nanoparticles.

Redox reactions are of great importance in environmental catalysis. Gold nanoparticles (Au-NPs) have attracted much attention because of their catalytic activity and their localized surface plasmon resonance (LSPR). In the present study, we investigated, in detail, the reduction of ferricyanide (III) ion into a ferrocyanide (II) ion catalyzed by spherical gold nanoparticles of two different sizes, 15 nm and 30 nm, and excited at their LSPR band. Experiments were conducted in the presence (or absence) of sodium thiosulfate. This catalysis is enhanced in the presence of Au- NPs under visible light excitation. This reduction also takes place even without sodium thiosulfate. Our results demonstrate the implication of hot electrons in this reduction.

Hydrophobization of chitosan films by surface grafting with fluorinated polymer brushes.

Chitosan with its surface-properties and biodegradability is a promising biomaterial for green packaging applications. Till now, this application is still limited due to chitosan high sensitivity to water. Some existing studies deal with the incorporation of hydrophobic additives to enhance water-proof performances of chitosan films. As these additives may impair the film properties, our study focuses on chitosan efficient hydrophobization by means of simple and successful surface grafting reactions. Chitosan films prepared by solvent casting were modified by means of surface-initiated activators regenerated by electron transfer atom radical polymerization (SI-ARGET-ATRP) of 2-hydroxyethyl methacrylate (HEMA) followed by esterification reaction with fluorinated acyl compound. X-ray photoelectron spectroscopy (XPS), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and Time-of-Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) highlighted the surface chemical changes after each step. Surface properties were investigated by contact angle measurements and surface energy calculations. Hydrophobic surfaces with low surface energy and good water-repellent properties were obtained using a simple handling polymerization procedure. This is the first study in applying ARGET ATRP to prepare hydrophobic biopolymer films offering potential applications in packaging.

Lanthanoid-Doped Phosphate/Vanadate Mixed Hollow Particles as Ratiometric Luminescent Sensors.

Rare earth (RE) phosphates and vanadates are structurally similar compositions that display distinct but complementary luminescent properties. The properties of these phosphors can be combined in REPO4-REVO4 heterostructures during the development of new sensing technologies for biological applications. This work presents the synthesis of hollow RE phosphate/vanadate colloidal particles and evaluates their applicability as luminescent markers. Hydrothermal treatments of RE hydroxycarbonate particles in the presence of the PO43- and VO43- precursors afforded the final REPO4-REVO4 solids in a two-step template synthesis. We converted precursor hydroxycarbonate particles into the final heterostructures and characterized their structure and morphology. According to our detailed study into the spectroscopic properties of Eu3+-doped particles and their luminescence response to several species, the presence of the phosphate and vanadate phases in a single particle provided different chemical environments and enabled the design of a ratiometric approach to detect H2O2. These results open new perspectives for the development of new intracellular luminescent markers.