An induced thymic epithelial cell-based high throughput screen for thymus extracellular matrix mimetics.

Thymic epithelial cells (TECs) are key effectors of the thymic stroma and are critically required for T-cell development. TECs comprise a diverse set of related but functionally distinct cell types that are scarce and difficult to isolate and handle. This has precluded TEC-based screening assays. We previously described induced thymic epithelial cells (iTECs), an artificial cell type produced in vitro by direct reprogramming, raising the possibility that iTECs might provide the basis for functional screens related to TEC biology. Here, we present an iTEC-based three-stage medium/high-throughput in vitro assay for synthetic polymer mimics of thymic extracellular matrix (ECM). Using this assay, we identified, from a complex library, four polymers that bind iTEC as well as or better than gelatin but do not bind mesenchymal cells. We show that these four polymers also bind and maintain native mouse fetal TECs and native human fetal TECs. Finally, we show that the selected polymers do not interfere with iTEC function or T-cell development. Collectively, our data establish that iTECs can be used to screen for TEC-relevant compounds in at least some medium/high-throughput assays and identify synthetic polymer ECM mimics that can replace gelatin or ECM components in TEC culture protocols.

Expression of FBN1 during adipogenesis: Relevance to the lipodystrophy phenotype in Marfan syndrome and related conditions.

Fibrillin-1 is a large glycoprotein encoded by the FBN1 gene in humans. It provides strength and elasticity to connective tissues and is involved in regulating the bioavailability of the growth factor TGFß. Mutations in FBN1 may be associated with depleted or abnormal adipose tissue, seen in some patients with Marfan syndrome and lipodystrophies. As this lack of adipose tissue does not result in high morbidity or mortality, it is generally under-appreciated, but is a cause of psychosocial problems particularly to young patients. We examined the role of fibrillin-1 in adipogenesis. In inbred mouse strains we found significant variation in the level of expression in the Fbn1 gene that correlated with variation in several measures of body fat, suggesting that mouse fibrillin-1 is associated with the level of fat tissue. Furthermore, we found that FBN1 mRNA was up-regulated in the adipose tissue of obese women compared to non-obese, and associated with an increase in adipocyte size. We used human mesenchymal stem cells differentiated in culture to adipocytes to show that fibrillin-1 declines after the initiation of differentiation. Gene expression results from a similar experiment (available through the FANTOM5 project) revealed that the decline in fibrillin-1 protein was paralleled by a decline in FBN1 mRNA. Examination of the FBN1 gene showed that the region commonly affected in FBN1-associated lipodystrophy is highly conserved both across the three human fibrillin genes and across genes encoding fibrillin-1 in vertebrates. These results suggest that fibrillin-1 is involved as the undifferentiated mesenchymal stem cells transition to adipogenesis but then declines as the developing adipocytes take on their final phenotype. Since the C-terminal peptide of fibrillin-1 is a glucogenic hormone, individuals with low fibrillin-1 (for example with FBN1 mutations associated with lipodystrophy) may fail to differentiate adipocytes and/or to accumulate adipocyte lipids, although this still needs to be shown experimentally.

Arrays of 3D double-network hydrogels for the high-throughput discovery of materials with enhanced physical and biological properties.

Synthetic hydrogels are attractive biomaterials due to their similarity to natural tissues and their chemical tunability, which can impart abilities to respond to environmental cues, e.g. temperature, pH and light. The mechanical properties of hydrogels can be enhanced by the generation of a double-network. Here, we report the development of an array platform that allows the macroscopic synthesis of up to 80 single- and double-network hydrogels on a single microscope slide. This new platform allows for the screening of hydrogels as 3D features in a high-throughput format with the added dimension of significant control over the compressive and tensile properties of the materials, thus widening their potential application. The platform is adaptable to allow different hydrogels to be generated, with the potential ability to tune and alter the first and second network, and represents an exciting tool in material and biomaterial discovery.

Datasets of genes coexpressed with FBN1 in mouse adipose tissue and during human adipogenesis.

This article contains data related to the research article entitled "Expression of FBN1 during adipogenesis: relevance to the lipodystrophy phenotype in Marfan syndrome and related conditions" [1]. The article concerns the expression of FBN1, the gene encoding the extracellular matrix protein fibrillin-1, during adipogenesis in vitro and in relation to adipose tissue in vivo. The encoded protein has recently been shown to produce a short glucogenic peptide hormone, (Romere et al., 2016) [2], and this gene is therefore a key gene for regulating blood glucose levels. FBN1 and coexpressed genes were examined in mouse strains and in human cells undergoing adipogenesis. The data show the genes that were coexpressed with FBN1, including genes coding for other connective tissue proteins and the proteases that modify them and for the transcription factors that control their expression. Data analysed were derived from datasets available in the public domain and the analysis highlights the utility of such datasets for ongoing analysis and hence reduction in the use of experimental animals.

A high-throughput polymer microarray approach for identifying defined substrates for mesenchymal stem cells.

Mesenchymal stem cells (MSCs) hold great promise in regenerative medicine due to their wide multilineage potential as well as their ability to suppress/modulate the immune response. Maintaining these cells in vitro and expanding them on a clinically relevant scale remains a challenge that needs to be addressed to realise their full potential. Current culture methods for MSCs typically rely on animal sourced substrates and often result in a heterogeneous population of cells with varying degrees of differentiation capacity. Here, a high-throughput platform was used to identify synthetic substrates for MSC culture that not only facilitated growth but also maintained the MSC phenotype. Two polymers, PU157 (synthesised from poly(butyleneglycol) and 4,4'-methylenediphenyldiisocyanate with 3-(dimethylamino)-1,2-propanediol as a chain extender) and PA338 (N-methylaniline modified poly(methylmethacrylate-co-glycidylmethacrylate)) were able to maintain the growth and phenotype of human embryonic derived mesenchymal progenitors (hES-MPs) and adipose derived MSCs (ADMSCs) for five and ten passages, respectively. Cell phenotype and multipotency were confirmed by flow cytometry analysis of ten MSC markers and differentiation analysis. These new polymer substrates provide a chemically defined synthetic surface for efficient, long-term MSC culture.

Long term mesenchymal stem cell culture on a defined synthetic substrate with enzyme free passaging.

Mesenchymal stems cells (MSCs) are currently the focus of numerous therapeutic approaches in tissue engineering/repair because of their wide multi-lineage potential and their ability to modulate the immune system response following transplantation. Culturing these cells, while maintaining their multipotency in vitro, currently relies on biological substrates such as gelatin, collagen and fibronectin. In addition, harvesting cells from these substrates requires enzymatic or chemical treatment, a process that will remove a multitude of cellular surface proteins, clearly an undesirable process if cells are to be used therapeutically. Herein, we applied a high-throughput 'hydrogel microarray' screening approach to identify thermo-modulatable substrates which can support hES-MP and ADMSC growth, permit gentle reagent free passaging, whilst maintaining multi-lineage potential. In summary, the hydrogel substrate identified, poly(AEtMA-Cl-co-DEAA) cross-linked with MBA, permitted MSCs to be maintained over 10 passages (each time via thermo-modulation), with the cells retaining expression of MSC associated markers and lineage potency. This chemically defined system allowed the passaging and maintenance of cellular phenotype of this clinically important cell type, in the absence of harsh passaging and the need for biological substrates.

A thermoresponsive and chemically defined hydrogel for long-term culture of human embryonic stem cells.

Cultures of human embryonic stem cell typically rely on protein matrices or feeder cells to support attachment and growth, while mechanical, enzymatic or chemical cell dissociation methods are used for cellular passaging. However, these methods are ill defined, thus introducing variability into the system, and may damage cells. They also exert selective pressures favouring cell aneuploidy and loss of differentiation potential. Here we report the identification of a family of chemically defined thermoresponsive synthetic hydrogels based on 2-(diethylamino)ethyl acrylate, which support long-term human embryonic stem cell growth and pluripotency over a period of 2-6 months. The hydrogels permitted gentle, reagent-free cell passaging by virtue of transient modulation of the ambient temperature from 37 to 15 °C for 30 min. These chemically defined alternatives to currently used, undefined biological substrates represent a flexible and scalable approach for improving the definition, efficacy and safety of human embryonic stem cell culture systems for research, industrial and clinical applications.

Dielectrophoresis based discrimination of human embryonic stem cells from differentiating derivatives.

Assessment of the dielectrophoresis (DEP) cross-over frequency (f xo), cell diameter, and derivative membrane capacitance (C m) values for a group of undifferentiated human embryonic stem cell (hESC) lines (H1, H9, RCM1, RH1), and for a transgenic subclone of H1 (T8) revealed that hESC lines could not be discriminated on their mean f xo and C m values, the latter of which ranged from 14 to 20 mF/m(2). Differentiation of H1 and H9 to a mesenchymal stem cell-like phenotype resulted in similar significant increases in mean C m values to 41-49 mF/m(2) in both lines (p < 0.0001). BMP4-induced differentiation of RCM1 to a trophoblast cell-like phenotype also resulted in a distinct and significant increase in mean C m value to 28 mF/m(2) (p < 0.0001). The progressive transition to a higher membrane capacitance was also evident after each passage of cell culture as H9 cells transitioned to a mesenchymal stem cell-like state induced by growth on a substrate of hyaluronan. These findings confirm the existence of distinctive parameters between undifferentiated and differentiating cells on which future application of dielectrophoresis in the context of hESC manufacturing can be based.