Size Tuned Synthesis of FeOOH Nanorods toward Self-Assembled Nanoarchitectonics.

Various studies were performed to fabricate self-assembling nanoobjects out of noble metals, but a few efforts were made for engineering iron-based nanorods toward sell-assembling blocks. In this regard ß-FeOOH nanorods were fabricated in various sizes to achieve iron-based rod nanoblocks with self-assembling potential. Hydrolysis of ferric ions in various concentrations was successfully developed as a novel approach to control the growth of ß-FeOOH crystals and tuning the length of rods in the nano range, below 100 nm. It was found that the concentration of ferric ion has no effect on the widths of nanorods, but the length was affected. By increasing the concentration of ferric ions, an increase in the length of nanorods and an increase of aspect ratio occurred. All sizes of the resulting FeOOH nanorods exhibited mesoporous feature, but interestingly the hysteresis loops were different due to different pore patterns. In fact, pores on the larger particles were more uniform in size and shape. Nanorods of small length did not make suitable interactions toward ordered phase formation, but rods with the mean length of about 90 nm or longer, at a certain concentration, were able to form nematic phases. The large (∼+40 mV) zeta-potential of nanorods prevents formation of dense arrays, and just bundle-like structures were observed. These findings highlight the importance of size, surface charge, and concentration of nanoobjects in the formation of 3D structures. The developed technique in the fabrication of ß-FeOOH nanorods provides pure structures that are free from any size-controlling agent. These pure structures are suitable for further functionalization or coating. Self-assembling nanoobjects is a developing field in nanotechnology, and therefore studies can help our understanding over the assembling process.

The effect of iron oxide nanoparticles on Lactobacillus acidophilus growth at pH 4.

Probiotics, in particular, lactic acid bacteria (LAB) are widely used as starter cultures in food and pharmaceutical industries. Presence of LAB supports the production and preservation of a diverse range of food products, provides a positive effect on the human gastrointestinal tract, and prevents the progression of many diseases. However, the main limiting factor in the application of LAB is that they hardly survive in acidic conditions, including the human digestive system. This factor inhibits LAB to maintain their functionality and deliver their health benefits to the host. For this purpose, magnetic immobilisation of LAB with iron oxide nanoparticles (IONs) was conducted to evaluate the effect of IONs on bacterial growth and their viability at low pH. Gram-positive Lactobacillus acidophilus, a well-known species of LAB, was selected for this study. The IONs were successfully synthesised with the average size of 7 nm and used for decoration of L. acidophilus cells at low pH. Based on the results, a 1.8-fold increase in bacterial viability was observed by decorating cells with 360 µg/mL IONs.

Microbial calcium carbonate precipitation with high affinity to fill the concrete pore space: nanobiotechnological approach.

Despite the advantages of concrete, it has a pore structure and is susceptible to cracking. The initiated cracks as well as pores and their connectivity accelerate the structure degradation by permitting aggressive substances to flow into the concrete matrix. This phenomenon results in a considerable repair and maintenance costs and decreases the concrete lifespan. In recent years, biotechnological approach through immobilization of bacteria in/or protective vehicles has emerged as a viable solution to address this issue. However, the addition of macro- or micro scale size particles can decrease the integrity of matrix. In this study, the immobilization of bacteria with magnetic iron oxide nanoparticle (ION) was proposed to protect the bacterial cell and evaluate their effect on healing the concrete pore space. The results show that the addition of immobilized bacteria with IONs resulted in a lower water absorption and volume of permeable pore space. Crystal analysis using scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) revealed that CaCO3 was precipitated in bio-concrete specimen as a result of microbial biosynthesis.

Structural characterization of polysaccharide-coated iron oxide nanoparticles produced by Staphylococcus warneri, isolated from a thermal spring.

The biocompatible-coated iron oxide nanoparticles (IONs) have attracted a great interest because of their various applications in biological science and medicine. In most cases, the toxic effect of naked iron oxide nanoparticles is completely cleared by adding a biocompatible coating, such as polysaccharides, polyethylene glycol (PEG), or biosynthesis of biocompatible-coated IONs using microorganisms such as bacteria. In the present study, polysaccharide-coated iron oxide nanoparticles were produced by a strain of Staphylococcus warneri isolated from a thermal spring. For identification of the isolated bacterium, 16S rRNA gene sequencing was done. Characterization of the nanoparticles was performed for the first time, using transmission electron microscopy (TEM), dynamic light scattering (DLS), thermogravimetric analysis (TGA), X-ray crystallography (XRD), Fourier-transform infrared (FTIR) spectroscopy, vibrating sample magnetometer (VSM), and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Results indicated that the spherical iron oxide nanoparticles were coated by a polysaccharide (13.6%), which provided a large negative charge of -91 mV and very low saturation magnetization of around 0.28 emu/g. The result of MTT assay on MOLT-4 cell lines showed that the percentage of viability was between 95.6% and 68.9% in the 10-100 µM of nanoparticle concentrations with a high IC 50 value, which makes it appropriate for biomedical applications such as cancer therapy.

The role of magnetic iron oxide nanoparticles in the bacterially induced calcium carbonate precipitation.

Recently, magnetic iron oxide nanoparticles (IONs) have been used to control and modify the characteristics of concrete and mortar. Concrete is one of the most used materials in the world; however, it is susceptible to cracking. Over recent years, a sustainable biotechnological approach has emerged as an alternative approach to conventional techniques to heal the concrete cracks by the incorporation of bacterial cells and nutrients into the concrete matrix. Once cracking occurs, CaCO3 is induced and the crack is healed. Considering the positive effects of IONs on the concrete properties, the effect of these nanoparticles on bacterial growth and CaCO3 biosynthesis needs to be evaluated for their possible application in bio self-healing concrete. In the present work, IONs were successfully synthesized and characterized using various techniques. The presence of IONs showed a significant effect on both bacterial growth and CaCO3 precipitation. The highest bacterial growth was observed in the presence of 150 µg/mL IONs. The highest concentration of induced CaCO3 (34.54 g/L) was achieved when the bacterial cells were immobilized with 300 µg/mL of IONs. This study provides new data and supports the possibility of using IONs as a new tool in designing the next generation of bio self-healing concrete.

Amine-modified magnetic iron oxide nanoparticle as a promising carrier for application in bio self-healing concrete.

Self-healing mechanisms are a promising solution to address the concrete cracking issue. Among the investigated self-healing strategies, the biotechnological approach is distinguished itself by inducing the most compatible material with concrete composition. In this method, the potent bacteria and nutrients are incorporated into the concrete matrix. Once cracking occurs, the bacteria will be activated, and the induced CaCO3 crystals will seal the concrete cracks. However, the effectiveness of a bio self-healing concrete strictly depends on the viability of bacteria. Therefore, it is required to protect the bacteria from the resulted shear forces caused by mixing and drying shrinkage of concrete. Due to the positive effects on mechanical properties and the high compatibility of metallic nanoparticles with concrete composition, for the first time, we propose 3-aminopropyltriethoxy silane-coated iron oxide nanoparticles (APTES-coated IONs) as a biocompatible carrier for Bacillus species. This study was aimed to investigate the effect of APTES-coated IONs on the bacterial viability and CaCO3 yield for future application in the concrete structures. The APTES-coated IONs were successfully synthesized and characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The results show that the presence of 100 µg/mL APTES-coated IONs could increase the bacterial viability. It was also found that the CaCO3-specific yield was significantly affected in the presence of APTES-coated IONs. The highest CaCO3-specific yield was achieved when the cells were decorated with 50 µg/mL of APTES-coated IONs. This study provides new insights for the application of APTES-coated IONs in designing bio self-healing strategies.

Mechanical properties of bio self-healing concrete containing immobilized bacteria with iron oxide nanoparticles.

Concrete is arguably one of the most important and widely used materials in the world, responsible for the majority of the industrial revolution due to its unique properties. However, it is susceptible to cracking under internal and external stresses. The generated cracks result in a significant reduction in the concrete lifespan and an increase in maintenance and repair costs. In recent years, the implementation of bacterial-based healing agent in the concrete matrix has emerged as one of the most promising approaches to address the concrete cracking issue. However, the bacterial cells need to be protected from the high pH content of concrete as well as the exerted shear forces during preparation and hardening stages. To address these issues, we propose the magnetic immobilization of bacteria with iron oxide nanoparticles (IONs). In the present study, the effect of the designed bio-agent on mechanical properties of concrete (compressive strength and drying shrinkage) is investigated. The results indicate that the addition of immobilized Bacillus species with IONs in concrete matrix contributes to increasing the compressive strength. Moreover, the precipitates in the bio-concrete specimen were characterized using scanning electron microscope (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDS). The characterization studies confirm that the precipitated crystals in bio-concrete specimen were CaCO3, while no precipitation was observed in the control sample.

Bio-reinforced self-healing concrete using magnetic iron oxide nanoparticles.

Immobilization has been reported as an efficient technique to address the bacterial vulnerability for application in bio self-healing concrete. In this study, for the first time, magnetic iron oxide nanoparticles (IONs) are being practically employed as the protective vehicle for bacteria to evaluate the self-healing performance in concrete environment. Magnetic IONs were successfully synthesized and characterized using different techniques. The scanning electron microscope (SEM) images show the efficient adsorption of nanoparticles to the Bacillus cells. Microscopic observation illustrates that the incorporation of the immobilized bacteria in the concrete matrix resulted in a significant crack healing behavior, while the control specimen had no healing characteristics. Analysis of bio-precipitates revealed that the induced minerals in the cracks were calcium carbonate. The effect of magnetic immobilized cells on the concrete water absorption showed that the concrete specimens supplemented with decorated bacteria with IONs had a higher resistance to water penetration. The initial and secondary water absorption rates in bio-concrete specimens were 26% and 22% lower than the control specimens. Due to the compatible behavior of IONs with the concrete compositions, the results of this study proved the potential application of IONs for developing a new generation of bio self-healing concrete.

Magnetic immobilization of bacteria using iron oxide nanoparticles.

Bacterial cell immobilization is a novel technique used in many areas of biosciences and biotechnology. Iron oxide nanoparticles have attracted much attention in bacterial cell immobilization due to their unique properties such as superparamagnetism, large surface area to volume ratio, biocompatibility and easy separation methodology. Adhesion is the basis behind many immobilization techniques and various types of interactions determine bacterial adhesion. Efficiency of bacterial cell immobilization using iron oxide nanoparticles (IONs) generally depends on the physicochemical properties of the IONs and surface properties of bacterial cells as well as environmental/culture conditions. Bacteria exhibit various metabolic responses upon interaction with IONs, and the potential applications of iron oxide nanoparticles in bacterial cell immobilization will be discussed in this work.

Iron oxide nanoparticles in modern microbiology and biotechnology.

Iron oxide nanoparticles (IONs) are one of the most developed and used nanomaterials in biotechnology and microbiology. These particles have unique physicochemical properties, which make them unique among nanomaterials. Therefore, many experiments have been conducted to develop facile synthesis methods for these particles and to make them biocompatible. Various effects of IONs on microorganisms have been reported. Depending on the microbial strain and nanoparticle (NP) concentration, IONs can stimulate or inhibit microbial growth. Due to the superparamagnetic properties of IONs, these NPs have used as nano sources of heat for hyperthermia in infected tissues. Antibiotic-loaded IONs are used for targeted delivery of chemical therapy direct to the infected organ and IONs have been used as a dirigible carrier for more potent antimicrobial nanomaterials such as silver nanoparticles. Magnetic NPs have been used for specific separation of pathogen and non-pathogen bacterial strains. Very recently, IONs were used as a novel tool for magnetic immobilization of microbial cells and process intensification in a biotechnological process. This review provides an overview of application of IONs in different microbial processes. Recommendations are also given for areas of future research.

Physicochemical and biological characteristics of the nanostructured polysaccharide-iron hydrogel produced by microorganism Klebsiella oxytoca.

There is an increasing interest in the nanostructured polysaccharide-iron hydrogel produced by Klebsiella oxytoca. Critical physicochemical and biological characteristics of these nanostructures should be revealed for biomedical applications. Accordingly, an iron reducing strain K. oxytoca, which synthesizes biogenic polysaccharide-iron hydrogel nanoparticles, known as Fe (III)-exopolysaccharide (Fe-EPS) was isolated from a mineral spring. For microbiological identification purpose 16S rRNA sequence analysis and different morphological, physiological, and biochemical characteristics of the isolate were studied. Critical physicochemical and biological characteristics of the produced Fe-EPS were evaluated using transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, X-ray crystallography (XRD), vibrating sample magnetometer (VSM). In addition, for the first time, Fe-EPS which synthesized by K. oxytoca was evaluated by dynamic light scattering (DLS), thermo gravimetric analysis (TGA), and cytotoxicity assay. TEM micrographs showed that the biogenic Fe-EPS is composed of ultra-small (about 1.8 nm) iron oxide nanoparticles (IONs) which are trapped in a polysaccharide matrix. The matrix was about 17% (w/w) of Fe-EPS total weight and provided a large negative charge of -71 mV. Interestingly, Fe-EPS showed a growth promotion effect on hepatocarcinoma cell line (Hep-G2) and 36% increase in the percentage of viability was observed by 24 h exposure to 500 µg ml-1 Fe-EPS.

Magnetic immobilization of Bacillus subtilis natto cells for menaquinone-7 fermentation.

Production of menaquinone-7 (MK-7) by Bacillus subtilis natto is associated with major drawbacks. To address the current challenges in MK-7 fermentation, studying the effect of magnetic nanoparticles on the bacterial cells can open up a new domain for intensified bioprocesses. This article introduces the new concept of application of iron oxide nanoparticles (IONs) as a pioneer tool for MK-7 process intensification. In this order, IONs with the average size of 11 nm were successfully fabricated and characterized for possible in situ removal of target substances from the fermentation media. The prepared particles were used for decoration and immobilization of B. subtilis natto cells. Presence of iron oxide nanoparticles significantly enhanced the MK-7 specific yield (15 %) as compared to the control samples. In addition, fabricated IONs showed a promising ability for in situ recovery of bacterial cells from the fermentation media with more than 95 % capture efficiency. Based on the results, IONs can be implemented successfully as a novel tool for MK-7 production. This study provides a considerable interest for industrial application of magnetic nanoparticles and their future role in designing an intensified biological process.

Lag Plot: A Novel Method to Determine Viable Bacterial Cell Number via a Single OD Measurement.

Bactericidal activity is a valuable parameter which is considered and measured for antimicrobial compounds. The available standard protocol to evaluate bactericidal activity is based on the direct colony count. Colony counting requires serial dilution, plating, overnight incubation, and direct counting, which is time-and labor-intensive. In regard to eliminate direct plate count, novel techniques were developed based on the real-time growth monitoring which can come with some limitations and drawbacks. These drawbacks encourage us to develop a novel technique with simple procedure to determine viable bacterial cell count. In this procedure, real-time growth monitoring is not required. In fact, after an incubation time, the number of viable bacteria can be determined with a single OD measurement and through an equation. In this regard, four standard bacterial strains, including Staphylococcus aureus (ATCC 25923), Escherichia coli (ATCC 25922), Pseudomonas aeruginosa (ATCC 27853), and Bacillus subtilis (ATCC 23857), were cultured with descending inoculum densities (1.5 × 107 to 15 CFU/mL) and growth curves were drawn. As expected, growth in the samples with lower inoculum densities recorded with longer lag phase. Also, a direct relation was observed between the recorded turbidities and initial cell counts. A logarithmic curve (lag plot) was obtained by plotting the OD, after 12-18 h incubation, against initial cell counts. In all examined strains, R2 was calculated in the range of 0.96-0.99 which is acceptable value for coefficient of determination. Equation corresponding to the lag plot was obtained and called lag equation. This equation is applicable to calculate the number of viable cells in unknown samples simply by inoculation, incubation, and single OD measurement. Developed technique can be introduced as a simple substitution for labor- and time-intensive direct colony counting.

The Effect of Iron Oxide Nanoparticles on the Menaquinone-7 Isomer Composition and Synthesis of the Biologically Significant All-Trans Isomer.

Menaquinone-7 (MK-7) is the most therapeutically valuable K vitamin owing to its excellent bioavailability. MK-7 occurs as geometric isomers, and only all-trans MK-7 is bioactive. The fermentation-based synthesis of MK-7 entails various challenges, primarily the low fermentation yield and numerous downstream processing steps. This raises the cost of production and translates to an expensive final product that is not widely accessible. Iron oxide nanoparticles (IONPs) can potentially overcome these obstacles due to their ability to enhance fermentation productivity and enable process intensification. Nevertheless, utilisation of IONPs in this regard is only beneficial if the biologically active isomer is achieved in the greatest proportion, the investigation of which constituted the objective of this study. IONPs (Fe3O4) with an average size of 11 nm were synthesised and characterised using different analytical techniques, and their effect on isomer production and bacterial growth was assessed. The optimum IONP concentration (300 µg/mL) improved the process output and resulted in a 1.6-fold increase in the all-trans isomer yield compared to the control. This investigation was the first to evaluate the role of IONPs in the synthesis of MK-7 isomers, and its outcomes will assist the development of an efficient fermentation system that favours the production of bioactive MK-7.

The Impact of Amine-Functionalised Iron Oxide Nanoparticles on the Menaquinone-7 Isomer Profile and Production of the Bioactive Isomer.

The K family of vitamins includes a collection of molecules with different pharmacokinetic characteristics. Menaquinone-7 (MK-7) has the finest properties and is the most therapeutically beneficial due to its long plasma half-life and outstanding extrahepatic bioavailability. MK-7 exhibits cis-trans isomerism, and merely the all-trans form is biologically efficacious. Therefore, the remedial value of MK-7 end products is exclusively governed by the quantity of all-trans MK-7. Consumers favour fermentation for the production of MK-7; however, it involves several challenges. The low MK-7 yield and extensive downstream processing requirements increase production costs, resulting in an expensive final product that is not universally available. Bacterial cell immobilisation with iron oxide nanoparticles (IONs) can potentially address the limitations of MK-7 fermentation. Uncoated IONs tend to have low stability and can adversely affect cell viability; thus, amine-functionalised IONs, owing to their increased physicochemical stability and biocompatibility, are a favourable alternative. Nonetheless, employing biocompatible IONs for this purpose is only advantageous if the bioactive MK-7 isomer is obtained in the most significant fraction, exploring which formed the aim of this investigation. Two amine-functionalised IONs, namely 3-aminopropyltriethoxysilane (APTES)-coated IONs (IONs@APTES) and L-Lysine (L-Lys)-coated IONs (L-Lys@IONs), were synthesised and characterised, and their impact on various parameters was evaluated. IONs@APTES were superior, and the optimal concentration (300 [Formula: see text]g/mL) increased all-trans MK-7 production and improved its yield relative to the untreated cells by 2.3- and 3.1-fold, respectively. The outcomes of this study present an opportunity to develop an innovative and effective fermentation method that enhances the production of bioactive MK-7.

Surface modification of polycaprolactone nanofibers through hydrolysis and aminolysis: a comparative study on structural characteristics, mechanical properties, and cellular performance.

Hydrolysis and aminolysis are two main commonly used chemical methods for surface modification of hydrophobic tissue engineering scaffolds. The type of chemical reagents along with the concentration and treatment time are main factors that determine the effects of these methods on biomaterials. In the present study, electrospun poly (ℇ-caprolactone) (PCL) nanofibers were modified through hydrolysis and aminolysis. The applied chemical solutions for hydrolysis and aminolysis were NaOH (0.5-2 M) and hexamethylenediamine/isopropanol (HMD/IPA, 0.5-2 M) correspondingly. Three distinct incubation time points were predetermined for the hydrolysis and aminolysis treatments. According to the scanning electron microscopy results, morphological changes emerged only in the higher concentrations of hydrolysis solution (1 M and 2 M) and prolonged treatment duration (6 and 12 h). In contrast, aminolysis treatments induced slight changes in the morphological features of the electrospun PCL nanofibers. Even though surface hydrophilicity of PCL nanofibers was noticeably improved through the both methods, the resultant influence of hydrolysis was comparatively more considerable. As a general trend, both hydrolysis and aminolysis resulted in a moderate decline in the mechanical performance of PCL samples. Energy dispersive spectroscopy analysis indicated elemental changes after the hydrolysis and aminolysis treatments. However, X-ray diffraction, thermogravimetric analysis, and infrared spectroscopy results did not show noticeable alterations subsequent to the treatments. The fibroblast cells were well spread and exhibited a spindle-like shape on the both treated groups. Furthermore, according to the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, the surface treatment procedures ameliorated proliferative properties of PCL nanofibers. These findings represented that the modified PCL nanofibrous samples by hydrolysis and aminolysis treatments can be considered as the potentially favorable candidates for tissue engineering applications.

Superior Performance of Iron-Coated Silver Nanoparticles and Cefoxitin as an Antibiotic Composite Against Methicillin-Resistant Staphylococcus aureus (MRSA): A Population Study.

The synergistic effects of antimicrobial nanostructures with antibiotics present a promising solution for overcoming resistance in methicillin-resistant Staphylococcus aureus (MRSA). Previous studies have introduced iron as a novel coating for silver nanoparticles (AgNPs) to enhance both economic efficiency and potency against S. aureus. However, there are currently no available data on the potential of these novel nanostructures to reverse MRSA resistance. To address this gap, a population study was conducted within the MRSA community, collecting a total of 48 S. aureus isolates from skin lesions. Among these, 21 isolates (43.75%) exhibited cefoxitin resistance as determined by agar disk diffusion assay. Subsequently, a PCR test confirmed the presence of the mecA gene in 20 isolates, verifying them as MRSA. These results highlight the cefoxitin disk diffusion susceptibility test as an accurate screening method for predicting mecA-mediated resistance in MRSA. Synergy tests were performed on cefoxitin, serving as a marker antibiotic, and iron-coated AgNPs (Fe@AgNPs) in a combination study using the checkerboard assay. The average minimal inhibitory concentration (MIC) and fractional inhibitory concentration (FIC) of cefoxitin were calculated as 11.55 mg/mL and 3.61 mg/mL, respectively. The findings indicated a synergistic effect (FIC index < 0.5) between Fe@AgNPs and cefoxitin against 90% of MRSA infections, while an additive effect (0.5 ≤ FIC index ≤ 1) could be expected in 10% of infections. These results suggest that Fe@AgNPs could serve as an economically viable candidate for co-administration with antibiotics to reverse resistance in MRSA infections within skin lesions. Such findings may pave the way for the development of future treatment strategies against MRSA infections.

Green Synthesized Iron-Coated Silver Nanoparticles: Economic Bimetallic Nanoparticles Potential Against Methicillin-Resistance Staphylococcus aureus.

Iron coating was introduced as one of the novel techniques to improve physicochemical and biological properties of silver nanoparticles (AgNPs). In the current experiment, impact of iron coating on the antimicrobial potency of AgNPs was investigated against methicillin-resistance Staphylococcus aureus (MRSA). To obtain more accurate data about the antimicrobial potency of examined nanostructures, the experiment was done on the 10 isolates of MRSA which were isolated from skin lesions. AgNPs and iron-coated AgNPs (Fe@AgNPs) were fabricated based on a green one-pot reaction procedure. Minimal inhibitory concentration (MIC) of Fe@AgNPs was not significantly different with MIC of AgNPs against eight out of 10 examined MRSA isolates. Also, by iron coating a reduction in the minimal inhibitory concentration (MIC) of AgNPs was observed against two MRSA isolates. The average MIC of AgNPs against 10 MRSA isolates was calculated to be 2.16 ± 0.382 mg/mL and this value was reduced to 1.70 ± 0.638 mg/mL for Fe@AgNPs. However, this difference was not considered significant statistically (P-value > 0.05). From productivity point of view, it was found that iron coating would improve the productivity of the synthesis reaction more than fivefold. Productivity of AgNPs was calculated to be 1.02 ± 0.07 g/L, meanwhile this value was 5.25 ± 0.05 g/L for Fe@AgNPs. Iron coating may provide another economic benefit to reduce final price of AgNPs. It is obvious that the price of a particular nanostructure made of silver and iron is significantly lower than that of pure silver. These findings can be considered for the fabrication of economic and potent antimicrobial nanoparticles.

Impacts of Magnetic Immobilization on the Growth and Metabolic Status of Recombinant Pichia pastoris.

Downstream processing is an expensive step for industrial production of recombinant proteins. Cell immobilization is known as one of the ideal solutions in regard to process intensification. In recent years, magnetic immobilization was introduced as a new technique for cell immobilization. This technique was successfully employed to harvest many bacterial and eukaryotic cells. But there are no data about the influence of magnetic immobilization on the eukaryotic inducted recombinant cells. In this study, impacts of magnetic immobilization on the growth and metabolic status of induced recombinant Pichia pastoris as a valuable eukaryotic model cells were investigated. Results based on colony-forming unit, OD600, and trypan blue assay indicated that magnetic immobilization had no adverse effect on the growth and viability of P. pastoris cells. Also, about 20-40% increase in metabolic activity was recorded in immobilized cells that were decorated with 0.5-2 mg/mL nanoparticles. Total protein and carbohydrate of the cells were also measured as main indicatives for cell function and no significant changes were observed in the immobilized cells. Current data show magnetic immobilization as a biocompatible technique for application in eukaryotic expression systems. Results can be considered for further developments in P. pastoris-based expression systems.

Application of FeOOH Nano-Ellipsoids as a Novel Nano-Based Iron Supplement: an In Vivo Study.

The possibility of employing FeOOH nano-ellipsoids as a novel shape nano-based iron supplement was investigated. Ferrous sulfate and nano-ellipsoids were daily administered by gavage at low and high dosages. After 1 month of treatment, the hematologic parameters along with serum and organs' iron contents were measured. Liver enzymes, total serum bilirubin, and LDH level were assayed to evaluate any possible toxicity. More investigation was also performed by organ index calculation and also pathologic studies. It was found that nano-ellipsoids are an effective iron supplement to improve iron-related blood parameters. Interestingly, low-dose nano-ellipsoids were even more effective than high-dose ferrous sulfate. Nano-ellipsoids had no considerable impact on the liver enzymes and serum bilirubin. Meanwhile, high-dose ferrous sulfate significantly increases liver enzyme activity. The increased serum LDH was also the only concern in the groups that were treated with high-dose ferrous sulfate and nano-ellipsoids. Pathologic evaluations revealed some signs of liver inflammation after supplementation with high dose nano-ellipsoids and also ferrous sulfate. Overall, these data indicate FeOOH nano-ellipsoids as a novel shape iron supplement to be employed at low dosage but with greater beneficial effects than high-dose ferrous sulfate.