RESUMEN
Hafnium oxide plays an important role as a dielectric material in various thin-film electronic devices such as transistors and resistive or ferroelectric memory. The crystallographic and electronic structure of the hafnia layer often depends critically on its composition and defect structure. Here, we report two novel defect-stabilized polymorphs of substoichiometric HfO2-x with semiconducting properties that are of particular interest for resistive switching digital or analog memory devices. The thin-film samples are synthesized by molecular beam epitaxy with oxygen engineering that allows us to cover the whole range of metallic Hf with oxygen interstitials to HfO2. The crystal and defect structures, in particular of a cubic low-temperature phase c-HfO1.7 and a hexagonal phase hcp-HfO0.7 are identified by X-ray diffraction, in vacuo electron spectroscopic, and transmission electron microscopic methods. With the help of UV/Vis transmission data, we propose a consistent band structure model for the whole oxidation range involving oxygen vacancy-induced in-gap defect states. Our comprehensive study of engineered hafnia thin films has an impact on the design of resistive memory devices and can be transferred to chemically similar suboxide systems.
RESUMEN
The intrinsic stability of the 5 V LiCoPO4-LiCo2P3O10 thin-film (carbon-free) cathode material coated with MoO3 thin layer is studied using a comprehensive synchrotron electron spectroscopy in situ approach combined with first-principle calculations. The atomic-molecular level study demonstrates fully reversible electronic properties of the cathode after the first electrochemical cycle. The polyanionic oxide is not involved in chemical reactions with the fluoroethylene-containing liquid electrolyte even when charged to 5.1 V vs Li+/Li. The high stability of the cathode is explained on the basis of the developed energy level model. In contrast, the chemical composition of the cathode-electrolyte interface evolves continuously by involving MoO3 in the decomposition reaction with consequent leaching of oxide from the surface. The proposed mechanisms of chemical reactions are attributed to external electrolyte oxidation via charge transfer from the relevant electron level to the MoO3 valence band state and internal electrolyte oxidation via proton transfer to the solvents. This study provides a deeper insight into the development of both a doping strategy to enhance the electronic conductivity of high-voltage cathode materials and an efficient surface coating against unfavorable interfacial chemical reactions.
RESUMEN
Titanium nitride thin films are used as an electrode material in superconducting (SC) applications and in oxide electronics. By controlling the defect density in the TiN thin film, the electrical properties of the film can achieve low resistivities and a high critical temperature (T c) close to bulk values. Generally, low defect densities are achieved by stoichiometric growth and a low grain boundary density. Due to the low lattice mismatch of 0.7%, the best performing TiN layers are grown epitaxially on MgO substrates. Here, we report for the first time a T c of 4.9 K for ultrathin (23 nm), highly textured (111), and stoichiometric TiN films grown on 8.75% lattice mismatch c-cut Al2O3 (sapphire) substrates. We demonstrate that with the increasing nitrogen deficiency, the (111) lattice constant increases, which is accompanied by a decrease in T c. For highly N deficient TiN thin films, no superconductivity could be observed. In addition, a dissociation of grain boundaries (GBs) by the emission of stacking faults could be observed, indicating a combination of two sources for electron scattering defects in the system: (a) volume defects created by nitrogen deficiency and (b) defects created by the presence of GBs. For all samples, the average grain boundary distance is kept constant by a miscut of the c-cut sapphire substrate, which allows us to distinguish the effect of nitrogen deficiency and grain boundary density. These properties and surface roughness govern the electrical performance of the films and influence the compatibility as an electrode material in the respective application. This study aims to provide detailed and scale-bridging insights into the structural and microstructural response to nitrogen deficiency in the c-Al2O3/TiN system, as it is a promising candidate for applications in state-of-the-art systems such as oxide electronic thin film stacks or SC applications.
RESUMEN
Utilizing the molecular beam epitaxy technique, a nanoscale thin-film magnet of c-axis-oriented Sm2Co17 and SmCo5 phases is stabilized. While typically in the prototype Sm(Co, Fe, Cu, Zr)7.5-8 pinning-type magnets, an ordered nanocomposite is formed by complex thermal treatments, here, a one-step approach to induce controlled phase separation in a binary Sm-Co system is shown. A detailed analysis of the extended X-ray absorption fine structure confirmed the coexistence of Sm2Co17 and SmCo5 phases with 65% Sm2Co17 and 35% SmCo5. The SmCo5 phase is stabilized directly on an Al2O3 substrate up to a thickness of 4 nm followed by a matrix of Sm2Co17 intermixed with SmCo5. This structural transition takes place through coherent atomic layers, as revealed by scanning transmission electron microscopy. Highly crystalline growth of well-aligned Sm2Co17 and SmCo5 phases with coherent interfaces result in strong exchange interaction, leading to enhanced magnetization and magnetic coupling. The arrangement of Sm2Co17 and SmCo5 phases at the nanoscale is reflected in the observed magnetocrystalline anisotropy and coercivity. As next-generation permanent magnets require designing of materials at an atomic level, this work enhances our understanding of self-assembling and functioning of nanophased magnets and contributes to establishing new concepts to engineer the microstructure for beyond state-of-the-art magnets.