Association of Toll-like receptors 2, 3, and 4 genes polymorphisms with periapical pathosis risk.

BACKGROUND: The aim of this study was to investigate the role of gene variations of Toll-like receptors (TLR) 2, 3, and 4 on genetic susceptibility to periapical pathosis. MATERIAL AND METHODS: One hundred patients were included in the study and divided into two groups as follows; Control Group (n=50) that have root canal treatment and no periapical lesion, Patient Group (n=50) that have root canal treatment and periapical lesion. TLR2 Arg753Gln, TLR3 (c.1377C/T) and TLR4 Asp299Gly and Thr399Ile polymorphisms were genotyped by using PCR-RFLP. Genotypical analysis of control and patient groups were investigated to disclose whether there is any association between periapical lesions and gene variations. RESULTS: There are no significant statistical differences between control and patient groups according to TLR 2 and 4 gene sequence. On the contrary, CC allele detected 74% for TLR 3 in patient group, and this difference was found to be statistically significant (p < 0.005). CONCLUSIONS: According to these results, it can be suggested that patients with Toll-like receptor 3 gene polymorphisms could be susceptible to periapical pathosis.

Comparison of various current electronic apex locators to determine the working length using the clearing technique.

BACKGROUND: Correct working length determination is an important step for successful endodontic therapy. OBJECTIVE: The objective was to compare in vitro the accuracy of three electronic apex locators (EALs) (DentaPort ZX [Morita Co., Tokyo, Japan], SIROEndo Pocket [Sirona Dental Systems, NY, USA], and Rootor [Meta Biomed, Cheongwon-gun, Korea]) in detecting the major foramen using the clearing technique. MATERIALS AND METHODS: Forty-five human extracted single-rooted teeth with mature apices were used for the study and divided into three groups of 15 teeth each. All teeth were embedded in an alginate model, and the electronic measurements were taken following the manufacturers' orientations. Then, the teeth were cleared and photographed under a stereomicroscope with a digital camera. The distance from the file tip to the major foramen was measured using image analysis software program. Statistical analysis was performed using the Kruskal-Wallis, Mann-Whitney U, and Chi-square tests at a significance level of 0.05. RESULTS: The mean distances from the file tip to the major foramen were 0.164 ± 0.292, -0.162 ± 0.234, 0.341 ± 0.166 mm in the DentaPort ZX, SIROEndo Pocket, and Rootor groups, respectively. Statistical analysis showed that there was a significant difference between SIROEndo Pocket and Rootor (P < 0.05). However, no significant difference was found between DentaPort ZX and other EALs (P > 0.05). CONCLUSION: DentaPort ZX located the major foramen with 100% accuracy within the range of ± 0.5 mm. However, the accuracy of the SIROEndo Pocket and Rootor in locating the major foramen within ± 0.5 mm was 73.3% and 86.7%, respectively. All EALs showed an acceptable determination of the major foramen within the range of ± 0.5 mm.

In vitro comparison of four different electronic apex locators to determine the major foramen using the clearing technique.

OBJECTIVES: The aim of this study was to evaluate the accuracy of four electronic apex locators (EALs) (DentaPort ZX, Raypex 5, Endo Master and VDW Gold) in detecting the major foramen using the clearing technique. MATERIALS AND METHODS: Forty-eight extracted single-rooted extracted teeth with mature apices were used for the study and divided into four groups of 12 teeth each. All teeth were embedded in an alginate model. Electronic measurements were taken using a size 15 K-file attached to the holder. Then, the teeth were cleared and photographed under a stereomicroscope with a digital camera. The distance between the tip of the file and the major foramen was measured by using an image analysis software program. Positive and negative values were recorded when the file tip was beyond or short of the major foramen and zero value when the file tip and the major foramen coincided. Statistical analysis was performed using the Kruskal-Wallis and Chi-square tests at a significance level of 0.05. RESULTS: Mean distance from the file tip to the major foramen were 0.302 ± 0.202, 0.065 ± 0.293, 0.117 ± 0.475, and 0.258 ± 0.160 mm in the DentaPort ZX, Raype 5, Endo Master, and VDW Gold groups, respectively. There were no statistically significant differences among the devices (P > 0.05) . CONCLUSION: Under the experimental conditions, all EALs showed an acceptable determination of the major foramen.

Root canal treatment of a periradicular lesion caused by unintentional root damage after orthodontic miniscrew placement: a case report.

AIM: To present the successful endodontic management of a maxillary lateral incisor tooth with a periradicular lesion caused by unintentional root damage after orthodontic miniscrew placement. SUMMARY: A 22-year-old female was diagnosed with a skeletal Class II, Division 2 malocclusion with Class II molar and canine relationships on both sides. The treatment plan included distalization of the maxillary first molars bilaterally followed by full fixed appliance therapy. For the maxillary molar distalization, an appliance in conjunction with a miniscrew anchorage system was designed. Two months later, the patient came to the clinic with complaints of pain in the maxillary right lateral incisor region. On intraoral examination, intraoral sinus tracts were detected in the maxillary right buccal sulcus and palate. A large radiolucent lesion with a well-defined margin around the root of the maxillary right lateral incisor was seen. Root canal treatment was performed on the maxillary right lateral incisor tooth. The root canal was filled with gutta-percha and AH Plus sealer, using a lateral compaction technique. The final restoration of the tooth was completed using composite, and the tooth was reviewed after 10 months. The tooth was asymptomatic and radiographically showed repair of the lesion. Healing was achieved without any need for further endodontic or surgical intervention. Key learning points • This case illustrates the need to take care with miniscrews when performing orthodontic treatment, especially when the miniscrews are in close proximity to root apices. • The periradicular lesion as a result of miniscrew damage was successfully treated with root canal treatment.

Efficacy of several techniques for the removal of calcium hydroxide medicament from root canals.

AIM: To compare the efficacy of several techniques for the removal of calcium hydroxide (Ca(OH)(2)) from root canals. METHODOLOGY: The root canals of 24 freshly extracted human mandibular premolars were prepared with ProTaper rotary instruments. The teeth were sectioned longitudinally along the length of the instrumented canals. The roots were subsequently reassembled with wires. After Ca(OH)(2) was placed into the canals, four techniques were used for its removal. In Group I, the teeth were irrigated with 5 mL of 2.5% NaOCl. Group II was treated in the same manner as Group I, but 5 mL of 17% EDTA was used in addition to NaOCl. In Group III, the teeth were irrigated with 5 mL of 2.5% NaOCl and agitated by an ultrasonic unit. In Group IV, the teeth were irrigated with 5 mL of 2.5% NaOCl and a CanalBrush was used to remove the Ca(OH)(2) . The roots were disassembled and digital photographs were taken. Measurements of residual Ca(OH)(2) were performed as percentages of the overall canal surface area. The data was analysed with one-way ANOVA with post hoc Tukey test. RESULTS: Significantly less residual material was obtained with a CanalBrush and passive ultrasonic agitation of NaOCl than the other groups (P < 0.05). There was no significant difference between syringe delivery of NaOCl and NaOCl+EDTA (P > 0.05). CONCLUSIONS: None of the techniques removed the Ca(OH)(2) dressing completely. CanalBrush and ultrasonic agitation of NaOCl were significantly more effective than irrigant-only techniques.

Apical extrusion of intracanal bacteria following use of various instrumentation techniques.

AIM: To evaluate the number of bacteria extruded apically from extracted teeth ex vivo after canal instrumentation using a manual technique and three engine-driven techniques utilizing nickel-titanium instruments (K3, RaCe, and FlexMaster). METHODOLOGY: Seventy extracted human mandibular premolar teeth with similar dimensions were used. Access cavities were prepared and root canals were then contaminated with a suspension of Enterococcus faecalis and then dried. The contaminated roots were divided into four experimental groups of 15 teeth each and one control group of 10 teeth. G1. RaCe group: the root canals were instrumented using RaCe instruments. G2. K3 group: the root canals were instrumented using K3 instruments. G3. FlexMaster group: the root canals were instrumented using FlexMaster instruments. G4. Manual technique group: the root canals were instrumented using K-type stainless steel instruments. G5. CONTROL GROUP: no instrumentation was attempted. Bacteria extruded from the apical foramen during instrumentation were collected into vials. The resultant microbiological samples were removed from the vials and then incubated in culture media for 24 h. The number of colony-forming units (CFU) was determined for each sample. The data obtained were analysed using the Kruskal-Wallis one-way analysis of variance and Mann-Whitney U-tests, with alpha = 0.05 as the level for statistical significance. RESULTS: There was a significant difference between experimental-control and engine-driven-manual technique groups (P < 0.05). The manual technique was associated with the greatest extrusion of microorganism. CONCLUSIONS: All instrumentation techniques extruded intracanal bacteria apically. No significant difference was found in the number of CFU among the engine-driven techniques; manual techniques extruded significantly more microorganisms.

Validated Outcomes in the Grafting of Autologous Fat to the Breast: The VOGUE Study. Development of a Core Outcome Set for Research and Audit.

BACKGROUND: Autologous fat grafting is an important part of the reconstructive surgeon's toolbox when treating women affected by breast cancer and subsequent tumor extirpation. The debate over safety and efficacy of autologous fat grafting continues within the literature. However, work performed by the authors' group has shown significant heterogeneity in outcome reporting. Core outcome sets have been shown to reduce heterogeneity in outcome reporting. The authors' goal was to develop a core outcome set for autologous fat grafting in breast reconstruction. METHODS: The authors published their protocol a priori. A Delphi consensus exercise among key stakeholders was conducted using a list of outcomes generated from their previous work. These outcomes were divided into six domains: oncologic, clinical, aesthetic and functional, patient-reported, process, and radiologic. RESULTS: In the first round, 55 of 78 participants (71 percent) completed the Delphi consensus exercise. Consensus was reached on nine of the 13 outcomes. The clarity of the results and lack of additional suggested outcomes deemed further rounds to be unnecessary. CONCLUSIONS: The VOGUE Study has led to the development of a much-needed core outcome set in the active research front and clinical area of autologous fat grafting. The authors hope that clinicians will use this core outcome set to audit their practice, and that researchers will implement these outcomes in their study design and reporting of autologous fat grafting outcomes. The authors encourage journals and surgical societies to endorse and encourage use of this core outcome set to help refine the scientific quality of the debate, the discourse, and the literature. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, V.

Inhibition of highly productive HIV-1 infection in T cells, primary human macrophages, microglia, and astrocytes by Sargassum fusiforme.

BACKGROUND: The high rate of HIV-1 mutation and increasing resistance to currently available antiretroviral (ART) therapies highlight the need for new antiviral agents. Products derived from natural sources have been shown to inhibit HIV-1 replication during various stages of the virus life cycle, and therefore represent a potential source of novel therapeutic agents. To expand our arsenal of therapeutics against HIV-1 infection, we investigated aqueous extract from Sargassum fusiforme (S. fusiforme) for ability to inhibit HIV-1 infection in the periphery, in T cells and human macrophages, and for ability to inhibit in the central nervous system (CNS), in microglia and astrocytes. RESULTS: S. fusiforme extract blocked HIV-1 infection and replication by over 90% in T cells, human macrophages and microglia, and it also inhibited pseudotyped HIV-1 (VSV/NL4-3) infection in human astrocytes by over 70%. Inhibition was mediated against both CXCR4 (X4) and CCR5 (R5)-tropic HIV-1, was dose dependant and long lasting, did not inhibit cell growth or viability, was not toxic to cells, and was comparable to inhibition by the nucleoside analogue 2', 3'-didoxycytidine (ddC). S. fusiforme treatment blocked direct cell-to-cell infection spread. To investigate at which point of the virus life cycle this inhibition occurs, we infected T cells and CD4-negative primary human astrocytes with HIV-1 pseudotyped with envelope glycoprotein of vesicular stomatitis virus (VSV), which bypasses the HIV receptor requirements. Infection by pseudotyped HIV-1 (VSV/NL4-3) was also inhibited in a dose dependant manner, although up to 57% less, as compared to inhibition of native NL4-3, indicating post-entry interferences. CONCLUSION: This is the first report demonstrating S. fusiforme to be a potent inhibitor of highly productive HIV-1 infection and replication in T cells, in primary human macrophages, microglia, and astrocytes. Results with VSV/NL4-3 infection, suggest inhibition of both entry and post-entry events of the virus life cycle. Absence of cytotoxicity and high viability of treated cells also suggest that S. fusiforme is a potential source of novel naturally occurring antiretroviral compounds that inhibit HIV-1 infection and replication at more than one site of the virus life cycle.

Evaluation of choroidal thickness in patients with scleroderma.

PURPOSE: To investigate the choroidal thickness in patients with scleroderma and to compare them with healthy control subjects. METHODS: Forty-six patients with scleroderma (3 male and 43 female) and 31 healthy controls (6 male and 25 female) were included in the study. Twenty-five patients had limited-type and 21 patients had diffuse-type scleroderma. Only left eyes of the patients and control subjects were used in the analysis. Demographic features of all the patients and control subjects were recorded. Each subject underwent ophthalmological examinations including refraction, visual acuity, intraocular pressure, axial length (AXL) measurement, slit-lamp biomicroscopy, and fundus examination. Body mass index (BMI) was estimated for all participants. RESULTS: There were no significant differences between the patients with scleroderma and the control subjects in terms of age, gender, BMI, mean AXL, and mean spherical equivalent refractive error (SE) (P=0.1, P=0.086, P=0.37, P=0.55, and P=0.072 respectively). The patients with scleroderma had significantly thinner nasal, temporal, and subfoveal choroid than the healthy control subjects (P1=0.012, P2=0.046, and P3<0.001, respectively). There were no significant differences between the patients with limited-type and diffuse-type scleroderma in terms of age, gender, BMI, mean AXL, mean SE, nasal, temporal, and subfoveal choroidal thicknesses (all P>0.05). CONCLUSIONS: Choroidal thickness in patients with scleroderma was significantly less than healthy control subjects. Vasculopathy in scleroderma is characterized by obliteration of arterioles and reduced capillary density may cause atrophy of choroid in patients with scleroderma.

Do the Different Types of Pulmonary Hypertension Cause the Same Effect on Right Heart and Serum Asymmetrical Dimethylarginine Levels in Female Patients?

ABSTRACT Objective: Right-heart function is a major determinant of clinical outcome in patients with elevated pulmonary artery pressure due to pulmonary venous hypertension (PVH) and pulmonary arterial hypertension (PAH). Asymmetric dimethylarginine (ADMA) is an endogenous inhibitor of nitric oxide synthase. This study aimed to evaluate if different types of pulmonary hypertension (PH) would cause the same effect on right-heart functions and serum ADMA levels in female patients. Methods: This study included patients with PAH as group I, patients with PVH due to mitral stenosis (mitral valve area ≤ 1.5 cm2, without any additional valve or left-heart disease and systolic pulmonary artery pressure ≥ 50 mmHg in transthoracic echocardiography) as group II, and healthy control subjects as group III. Transthorasic echocardiographic evaluations for right-heart functions were performed according to the guidelines of the American Society of Echocardiography. Venous blood samples were collected, and the serum ADMA concentrations were obtained with the ELISA kit (DRG® International Inc., Springfield, NJ, USA). Results: Patients in groups I and II had higher ADMA levels than healthy control subjects. Right-atrium area and dimensions, right-ventricular (RV) volumes, grade of tricuspid regurgitation, systolic pulmonary arterial pressure, RV wall thickness, and RV outflow tract diameters were significantly higher in group I patients than in group II patients. Right-ventricular myocardial performance index was lower, and RV fractional area change and tricuspid valve systolic tissue Doppler velocity were higher in group II patients than in group I patients. Conclusion: This study demonstrated that both PAH and PVH caused increase in right-heart dimensions and impairment in right-heart functions.

Evaluation of the effect of passive smoking on otitis media in children by an objective method: urinary cotinine analysis.

OBJECTIVES: We aimed to determine objectively the effect of the passive smoking on otitis media with effusion (OME) and recurrent otitis media (ROM) by using the method of cotinine urinalysis. STUDY DESIGN: We designed a prospective case-control study with follow-up of the case group for 1 year after insertion of tympanostomy tubes to evaluate postoperative complications such as otorrhea and early extrusion (<6 months), in case a significant risk factor was found. METHODS: One hundred fourteen children between 3 and 8 years of age requiring tympanostomy tubes because of OME and ROM were chosen and compared with 40 age-matched children. Exposure to environmental tobacco smoke was assessed by cotinine urinalysis, which was performed by means of the radioimmunoassay method. RESULTS: In this study, 73.7% (84 of 114) of the children in the case group and 55.0% (22 of 40) of the children in the control group were found to be "exposed" (P = .0461). This difference was statistically significant. Comparing the cotinine urinalysis results with parental smoking histories, 23.1% (9 of 39) of the children without parental smoking histories were "exposed" to tobacco smoke versus 84.3% (97 of 115) of the children with parental smoking histories (at least one person smoking). CONCLUSIONS: Our results indicate that sidestream smoking increases the risk of OME and ROM. Legal regulations and guidelines must be established to protect children from passive smoking. Because cotinine urinalysis is a noninvasive and reliable method for the determination of passive smoking, it can be used for that purpose.

Efficacy of three rotary NiTi instruments in removing gutta-percha from root canals.

AIM: To investigate the ability of three rotary nickel-titanium instruments and hand instrumentation to remove gutta-percha and sealer. METHODOLOGY: Sixty freshly extracted human single-rooted teeth, each with one root canal, were instrumented with K-files and filled using cold lateral compaction of gutta-percha and AH Plus (Dentsply Detrey, Konstanz, Germany) sealer. The teeth were randomly divided into four groups of 15 specimens each. Removal of gutta-percha was performed with the following devices and techniques: ProTaper, R-Endo, Mtwo and Hedström files. The specimens were rendered transparent and the area of remaining filling material on the root canal wall was measured using a computer image analysis program. Statistical analysis was accomplished by Kruskal-Wallis and Mann-Whitney U-tests with Bonferroni correction for the analysis of residual root filling material and working time. RESULTS: The ProTaper group had less filling material inside the root canals than the other groups, but a significant difference was found between only the ProTaper and Mtwo groups (P < 0.05). The retreatment time for Mtwo and ProTaper was significantly shorter compared with R-Endo and manual instrumentation with Hedström files (P < 0.001). R-Endo was significantly faster than manual instrumentation (P < 0.001). CONCLUSIONS: Under the experimental conditions, ProTaper left significantly less gutta-percha and sealer than Mtwo instruments. Complete removal of materials did not occur with any of the instrument systems investigated.

Fracture resistance of the buccal cusps of root filled maxillary premolar teeth restored with various techniques.

AIM: To compare the cusp fracture resistance of teeth restored with composite resins and two post systems. METHODOLOGY: Eighty extracted single-rooted human maxillary premolars were randomly assigned to eight groups (n = 10). Group 1 (control) did not receive any preparation. From groups 2 to 8, the teeth were root filled and mesio-occluso-distal (MOD) cavities were prepared. Group 2 remained unrestored. Group 3 was restored with packable resin composite using a single-step adhesive. Group 4 was restored with packable resin composite using a single-step adhesive and a thin layer of flowable resin composite. Group 5 was restored with packable resin composite using a total-etch two-step adhesive. Group 6 was restored with ormocer resin composite using a total-etch two-step adhesive. Group 7 was restored with an endodontic glass fibre post and hybrid resin composite using a total-etch two-step adhesive. Group 8 was restored with an endodontic zirconium post and hybrid resin composite using a total-etch two-step adhesive. The teeth were then mounted in a universal testing machine, the buccal cusp loaded (30 degrees ) until fracture, and the data analysed statistically. RESULTS: Group 1 had the greatest fracture resistance, and group 2 the poorest. Groups 5-8 had significantly greater (P < 0.05) fracture resistance than groups 3 and 4. No significant differences were found between groups 3 and 4, or amongst groups 5-8 (P > 0.05). CONCLUSIONS: For root filled maxillary premolars with MOD cavities, adhesive resin composite restorations, with and without glass and zirconium posts, increased the fracture resistance of the buccal cuSPS. A total-etch two-step adhesive increased significantly fracture resistance more than a one-step adhesive. For the one-step adhesive, an additional layer of flowable resin composite did not enhance fracture resistance.

Apical extrusion of intracanal bacteria following use of two engine-driven instrumentation techniques.

AIM: To evaluate the number of bacteria extruded apically from extracted teeth ex vivo after canal instrumentation using the two engine-driven techniques utilizing nickel-titanium instruments (ProTaper and System GT). METHODOLOGY: Forty extracted single-rooted human mandibular premolar teeth were used. Access cavities were prepared and root canals were then contaminated with a suspension of Enterococcus faecalis and dried. The contaminated roots were divided into two experimental groups of 15 teeth each and one control group of 10 teeth. Group 1, ProTaper group: the root canals were instrumented using ProTaper instruments. Group 2, System GT group: the root canals were instrumented using System GT instruments. Group 3, control group: no instrumentation was attempted. Bacteria extruded from the apical foramen during instrumentation were collected into vials. The microbiological samples from the vials were incubated in culture media for 24 h. Colonies of bacteria were counted and the results were given as number of colony-forming units. The data obtained were analysed using the Kruskal-Wallis one-way analysis of variance and Mann-Whitney U-tests, with alpha = 0.05 as the level for statistical significance. RESULTS: There was no significant difference as to the number of extruded bacteria between the ProTaper and System GT engine-driven systems (P > 0.05). CONCLUSIONS: Both engine-driven nickel-titanium systems extruded bacteria through the apical foramen.

The lamp effect of laser Doppler flowmetry on teeth.

The aim of this study is to analyse the intra and extracoronal scattering of laser light. Twelve vital teeth from 12 volunteer individuals (aged 22-29 years) were used. The camera removing the charge coupled device's infrared cut filter was used for imaging the laser Doppler flowmetry light during pulpal blood flow measurement. When the obtained photos were analysed, it was seen that the laser beam caused the tooth to shine like a lamp and it also illuminated the tissues inside the mouth (tongue, lips, adjacent teeth, etc.). As a result, it was shown that when the necessary cautions were not taken, the laser could scatter all around the tissues surrounding the tooth. Because of the conductive characteristic of the fibre and the optical characteristics of the tooth, we think that the beam is inevitably scattered onto the tissues outside the pulp and together with the isolation of the gingiva, crown should be isolated, as well.

In vitro fracture resistance of root-filled teeth using new-generation dentine bonding adhesives.

AIM: To compare the fracture resistance of root-filled premolar teeth restored with new-generation dentine bonding adhesives. METHODOLOGY: Sixty extracted single-rooted human maxillary premolar teeth were used. Access cavities were prepared, and the roots were instrumented with K-files to an apical size 50 using a step-back technique. Root fillings were accomplished using gutta percha (Sure-Endo, Seoul, Korea) and AH Plus root canal sealer (Dentsply DeTrey, Konstanz, Germany) using the lateral condensation technique. The teeth were then randomly divided into six groups of 10 teeth each. A mesiodistocclusal (MOD) cavity was prepared in the teeth to the level of the canal orifices so that the thickness of the buccal wall of the teeth measured 2 mm at the occlusal surface and 3 mm at the cemento-enamel junction. Preparations were restored using the following adhesive systems: Etch & Prime 3.0 (Degussa AG, Hanau, Germany), Clearfil SE Bond (Kuraray, Osaka, Japan), Prompt L-Pop (ESPE, Seefeld, Germany), Panavia F (Kuraray, Osaka, Japan), Optibond Plus (Kerr, Orange, CA, USA) and Admira Bond (Voco, Cuxhaven, Germany); all preparations except those of the Panavia F and Admira Bond groups were further restored with resin composites. The Panavia F group was restored with amalgam and the Admira Bond group with Ormocer (Voco, Cuxhaven, Germany). The teeth were mounted in a Universal Testing Machine (Hounsfield, Surrey, UK), and the buccal walls were subjected to a slowly increasing compressive force until fracture occurred. The force of fracture of the walls of each tooth was recorded and the results in the various groups were compared. Statistical analysis of the data was accomplished using one-way anova. RESULTS: There was no significant difference in the fracture resistance of any of the test groups. CONCLUSIONS: In this laboratory study, the type of dentine bonding agents had no influence in the fracture resistance of teeth.