Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
Más filtros

Banco de datos
Tipo del documento
País de afiliación
Intervalo de año de publicación
1.
ACS Appl Mater Interfaces ; 16(17): 22421-22432, 2024 May 01.
Artículo en Inglés | MEDLINE | ID: mdl-38634639

RESUMEN

Lanthanides are largely used in optoelectronics as dopants to enhance the physical and optical properties of semiconducting devices. In this study, lanthanum(III)hydroxide nanoparticles (La(OH)3NPs) are used as a dopant of polyethylenimine (PEI)-functionalized nitrogen (N)-doped graphene quantum dots (PEI-NGQDs). The La(OH)3NPs-dopedPEI-NGQDs nanocomposites are prepared from La(NO)3 in a single step by a green novel method and are characterized by Fourier-transform infrared spectroscopy (FT-IR), ultraviolet-visible spectroscopy (UV-vis), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Deposited over an n-type Si wafer, the La(OH)3NPs-dopedPEI-NGQDs nanocomposites form Schottky diodes. The I-V characteristics and the photoresponse of the diodes are investigated as a function of the illumination intensity in the range 0-110 mW cm-2 and at room temperature. It is found that the rectification ratio and ideality factor of the diode decrease, while the Schottky barrier and series resistance increase with the enhancing illuminations. As a photodetector, the La(OH)3NPs-dopedPEI-NGQDs/n-Si heterojunction exhibits an appreciable responsivity of 3.9 × 10-3 AW-1 under 22 mW cm-2 at -0.3 V bias and a maximum detectivity of 8.7 × 108 Jones under 22 mW cm-2 at -0.5 V. This study introduces the green synthesis and presents the structural, electrical, and optoelectronic properties of La(OH)3NPs-dopedPEI-NGQDs, demonstrating that these nanocomposites can be promising for optoelectronic applications.

2.
Nanoscale ; 16(35): 16718-16728, 2024 Sep 12.
Artículo en Inglés | MEDLINE | ID: mdl-39172122

RESUMEN

The field emission properties of rhenium diselenide (ReSe2) nanosheets on Si/SiO2 substrates, obtained through mechanical exfoliation, have been investigated. The n-type conduction was confirmed by using nano-manipulated tungsten probes inside a scanning electrode microscope to directly contact the ReSe2 flake in back-gated field effect transistor configuration, avoiding any lithographic process. By performing a finite element electrostatic simulation of the electric field, it is demonstrated that the use of a tungsten probe as anode, at a controlled distance from the ReSe2 emitter surface, allows the collection of emitted electrons from a reduced area that furtherly decreases by reducing the tip-sample distance, i.e. allowing a local characterization of the field emission properties. Experimentally, it is shown that the turn-on voltage can be linearly reduced by reducing the cathode-anode separation distance. By comparing the measured current-voltage characteristics with the numerical simulations, it is also shown that the effective field enhancement on the emitter surface is larger than expected because of surface defects. Finally, it is confirmed that ReSe2 nanosheets are suitable field emitters with high time stability and low current fluctuations.

3.
ACS Appl Mater Interfaces ; 15(43): 50302-50311, 2023 Nov 01.
Artículo en Inglés | MEDLINE | ID: mdl-37862154

RESUMEN

The electrical behavior and the photoresponse of rhenium disulfide field-effect transistors (FETs) have been widely studied; however, only a few works have investigated the photocurrent as a function of temperature. In this paper, we perform the electrical characterization of few-layer ReS2-based FETs with Cr-Au contacts over a wide temperature range. We exploit the temperature-dependent transfer and output characteristics to estimate the effective Schottky barrier at the Cr-Au/ReS2 interface and to investigate the temperature behavior of parameters, such as the threshold voltage, carrier concentration, mobility, and subthreshold swing. Through time-resolved photocurrent measurements, we show that the photocurrent increases with temperature and exhibits a linear dependence on the incident light power at both low and room temperatures and a longer rise/decay time at higher temperatures. We surmise that the photocurrent is affected by the photobolometric effect and light-induced desorption of adsorbates which are facilitated by the high temperature and the low pressure.

4.
Nanoscale Adv ; 5(24): 6958-6966, 2023 Dec 05.
Artículo en Inglés | MEDLINE | ID: mdl-38059017

RESUMEN

Field-effect transistors based on molybdenum disulfide (MoS2) exhibit a hysteresis in their transfer characteristics, which can be utilized to realize 2D memory devices. This hysteresis has been attributed to charge trapping due to adsorbates, or defects either in the MoS2 lattice or in the underlying substrate. We fabricated MoS2 field-effect transistors on SiO2/Si substrates, irradiated these devices with Xe30+ ions at a kinetic energy of 180 keV to deliberately introduce defects and studied the resulting changes of their electrical and hysteretic properties. We find clear influences of the irradiation: while the charge carrier mobility decreases linearly with increasing ion fluence (up to only 20% of its initial value) the conductivity actually increases again after an initial drop of around two orders of magnitude. We also find a significantly reduced n-doping (≈1012 cm-2) and a well-developed hysteresis after the irradiation. The hysteresis height increases with increasing ion fluence and enables us to characterize the irradiated MoS2 field-effect transistor as a memory device with remarkably longer relaxation times (≈ minutes) compared to previous works.

5.
ACS Appl Nano Mater ; 6(23): 21663-21670, 2023 Dec 08.
Artículo en Inglés | MEDLINE | ID: mdl-38093806

RESUMEN

Two-dimensional rhenium disulfide (ReS2), a member of the transition-metal dichalcogenide family, has received significant attention due to its potential applications in field-effect transistors (FETs), photodetectors, and memories. In this work, we investigate the suppression of the subthreshold current during the forward voltage gate sweep, leading to an inversion of the hysteresis in the transfer characteristics of ReS2 nanosheet-based FETs from clockwise to anticlockwise. We explore the impact of temperature, sweeping gate voltage, and pressure on this behavior. Notably, the suppression in current within the subthreshold region coincides with a peak in gate current, which increases beyond a specific temperature but remains unaffected by pressure. We attribute both the suppression in drain current and the presence of peak in gate current to the charge/discharge process of gate oxide traps by thermal-assisted tunnelling. The suppression of the subthreshold current at high temperatures not only reduces power consumption but also extends the operational temperature range of ReS2 nanosheet-based FETs.

6.
Nanomaterials (Basel) ; 12(11)2022 May 31.
Artículo en Inglés | MEDLINE | ID: mdl-35683748

RESUMEN

We report the fabrication and optoelectronic characterization of field-effect transistors (FETs) based on few-layer ReSe2. The devices show n-type conduction due to the Cr contacts that form low Schottky barriers with the ReSe2 nanosheet. We show that the optoelectronic performance of these FETs is strongly affected by air pressure, and it undergoes a dramatic increase in conductivity when the pressure is lowered below the atmospheric one. Surface-adsorbed oxygen and water molecules are very effective in doping ReSe2; hence, FETs based on this two-dimensional (2D) semiconductor can be used as an effective air pressure gauge. Finally, we report negative photoconductivity in the ReSe2 channel that we attribute to a back-gate-dependent trapping of the photo-excited charges.

7.
ACS Appl Mater Interfaces ; 13(40): 47895-47903, 2021 Oct 13.
Artículo en Inglés | MEDLINE | ID: mdl-34581561

RESUMEN

The fabrication of a graphene-silicon (Gr-Si) junction involves the formation of a parallel metal-insulator-semiconductor (MIS) structure, which is often disregarded but plays an important role in the optoelectronic properties of the device. In this work, the transfer of graphene onto a patterned n-type Si substrate, covered by Si3N4, produces a Gr-Si device, in which the parallel MIS consists of a Gr-Si3N4-Si structure surrounding the Gr-Si junction. The Gr-Si device exhibits rectifying behavior with a rectification ratio up to 104. The investigation of its temperature behavior is necessary to accurately estimate the Schottky barrier height (SBH) at zero bias, φb0 = 0.24 eV, the effective Richardson's constant, A* = 7 × 10-10 AK-2 cm-2, and the diode ideality factor n = 2.66 of the Gr-Si junction. The device is operated as a photodetector in both photocurrent and photovoltage mode in the visible and infrared (IR) spectral regions. A responsivity of up to 350 mA/W and an external quantum efficiency (EQE) of up to 75% are achieved in the 500-1200 nm wavelength range. Decreases in responsivity to 0.4 mA/W and EQE to 0.03% are observed above 1200 nm, which is in the IR region beyond the silicon optical band gap, in which photoexcitation is driven by graphene. Finally, a model based on two parallel and opposite diodes, one for the Gr-Si junction and the other for the Gr-Si3N4-Si MIS structure, is proposed to explain the electrical behavior of the Gr-Si device.

8.
Materials (Basel) ; 13(24)2020 Dec 21.
Artículo en Inglés | MEDLINE | ID: mdl-33371526

RESUMEN

Radon is a naturally occurring radioactive gas present in the hydrosphere, lithosphere and atmosphere abundantly. Its ionizing radiation provides the largest human internal exposure by inhalation and ingestion to natural sources, constituting a serious health hazard. The contribution to total exposure is mainly due to inhalation, as ingestion by food or drinking water is typically very small. However, because of public health concerns, the contributions from all these sources are limited by regulations and remedial action should be taken in the event that the defined threshold values are overcome. In this paper, the first campaign of measurements to control the radon activity concentration in drinking water from public water supplies in the province of Salerno, south Italy, is described. The results represent a main reference for the area, as it was never investigated before. The purpose of this survey was to contribute to data compilation concerning the presence of radon-222 in groundwater in the Campania region and to determine the associated risk for different age groups. The maximum radon activity concentrations and the related total annual public effective dose turned out to be lower than the threshold values (100 Bq/l and 0.1 mSv/y, respectively) indicated by international guidelines and the national regulation, showing that the health risks for public consumption can be considered negligible.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA