Single medium-sized hepatocellular carcinoma treated with sequential conventional transarterial chemoembolization (cTACE) and microwave ablation at 4 weeks versus cTACE alone: a propensity score.

BACKGROUND: Microwave ablation (MWA) is a potentially curative treatment for unresectable patients with hepatocellular carcinoma (HCC) ≤ 3 cm, while its therapeutic efficacy decreases significantly for HCC > 3cm. Previous studies have demonstrated that conventional transarterial chemoembolization (cTACE) combined with MWA (cTACE-MWA) may improve local tumor control rate and reduce the recurrence rate for HCC > 3cm. However, there have been few study designs to analyze the clinical efficacy of cTACE-MWA for medium-sized HCC (3-5cm). Therefore, this study aims to compare the clinical efficacy and safety of cTACE-MWA with cTACE alone for a single medium-sized HCC of 3-5 cm in diameter. METHODS: We retrospectively investigate the data of 90 patients with a single medium-sized HCC who were referred to our hospital and underwent cTACE-MWA or cTACE alone from December 2017 to March 2020. Then, patients were identified with propensity score-matched (1:1). The local tumor response to treatment and time to progression (TTP) were compared using mRECIST criteria between the cTACE-MWA group and the cTACE group. RESULTS: A total of 42 patients were included after matching (cTACE-MWA: 21; cTACE: 21). Comparing with cTACE, cTACE-MWA demonstrate significantly better local tumor control (ORR: 95.2% vs 61.9%, p = 0.02; DCR: 95.2% vs 66.7%, p = 0.045) and TTP (median 19.8 months vs 6.8 months, p < 0.001). The 1- and 2-year cumulative probabilities of OS were 100% and 95% in the cTACE-MWA group, which were significantly higher than those in the cTACE group (95% and 76%) (p = 0.032). Multivariate Cox regression analysis illustrates that cTACE-MWA was associated with better TTP (hazard ratio, 0.28; 95% CI: 0.1, 0.76; p = 0.012), but tumor size was associated with worse TTP (hazard ratio, 1.71; 95% CI: 1.01, 2.89; p = 0.045). CONCLUSIONS: cTACE followed by MWA improved TTP and OS in patients with a single medium-sized HCC, and no major complication was observed in this study.

Performance improvement of N-doped carbon ORR catalyst via large through-hole structure.

N-doped carbon-based materials are crucial electrically conductive additives and non-metal electrocatalysts for the oxygen reduction reaction. At present, many pieces of research are focused on the effects of micropore, mesopore and hierarchical pore structure on the catalytic activity, however, there are few works concerning the role of large-dimension through-hole structure. Hence, in this work, we prepare two kinds of carbon materials with large through-hole structure, i.e. N-doped carbon hollow-spheres and hollow-tubes, as the oxygen reduction catalysts. The synthesis follows template-free morphology-controlled pyrolysis, which is more convenient than the preparation of conventional N-doped nanotubes and graphene. The resultant N-doped carbon hollow-spheres and hollow-tubes evidently enhanced their ORR catalytic activity, remarkable long-term stability and methanol resistance. The large-dimension through-hole structure is found to account for the increase in mass transfer.

A Very Simple Strategy for Preparing External Stress-Free Two-Way Shape Memory Polymers by Making Use of Hydrogen Bonds.

Development of two-way shape memory polymers that operate free of external force remains a great challenge. Here, the design criteria for this type of material are proposed, deriving a novel fabrication strategy accordingly, which employs conventional crosslinked polyurethane (PU) containing crystalline poly(ε-caprolactone) (PCL) as the proof-of-concept material. Having been simply trained by stretching and thermal treatment without additional ingredients and chemicals, the PU is coupled with a two-way shape memory effect. The core advancement of this study lies in the successful conversion of the inherent hydrogen bond network, which is often the easiest to overlook, into an internal stress provider. The temperature-dependent reversible melting/recrystallization of the crystalline phases elaborately works with the tensed hydrogen bond network, leading to implementation of the two-way shape memory effect. An average reversible strain of as high as ≈20% along the stretch direction is obtained through cooperation adjustment of chemical crosslinking density, crystallinity, and concentration of hydrogen bonds. Meanwhile, the highest internal tension offered by the hydrogen bond network is determined to be 0.10 MPa. Owing to the great convenience characterized by material selection, preparation, programming, and application, the current work may open up an avenue for production and usage of the smart material.

A Facile Approach Toward Scalable Fabrication of Reversible Shape-Memory Polymers with Bonded Elastomer Microphases as Internal Stress Provider.

The present communication reports a novel strategy to fabricate reversible shape-memory polymer that operates without the aid of external force on the basis of a two-phase structure design. The proof-of-concept material, crosslinked styrene-butadiene-styrene block copolymer (SBS, dispersed phase)/polycaprolactone-based polyurethane (PU, continuous phase) blend, possesses a closely connected microphase separation structure. That is, SBS phases are chemically bonded to crosslinked PU by means of a single crosslinking agent and two-step crosslinking process for increasing integrity of the system. Miscibility between components in the blend is no longer critical by taking advantage of the reactive blending technique. It is found that a suitable programming leads to compressed SBS, which serves as internal expansion stress provider as a result. The desired two-way shape-memory effect is realized by the joint action of the temperature-induced reversible opposite directional deformabilities of the crystalline phase of PU and compressed SBS, accompanying melting and orientated recrystallization of the former. Owing to the broadness of material selection and manufacturing convenience, the proposed approach opens an avenue toward mass production and application of the smart polymer.

Imparting Ultrahigh Strength to Polymers via a New Concept Strategy of Construction of up to Duodecuple Hydrogen Bonding among Macromolecular Chains.

Interconnecting macromolecules via multiple hydrogen bonds (H-bonds) can simultaneously strengthen and toughen polymers, but material synthesis becomes extremely difficult with increasing number of H-bonding donors and acceptors; therefore, most reports are limited to triple and quadruple H-bonds. Herein, this bottleneck is overcome by adopting a quartet-wise approach of constructing H-bonds instead of the traditional pairwise method. Thus, large multiple hydrogen bonds can be easily established, and the supramolecular interactions are further reinforced. Especially, when such multiple H-bond motifs are embedded in polymers, four macromolecular chains-rather than two as usual-are tied, distributing the applied stress over a larger volume and more significantly improving the overall mechanical properties. Proof-of-concept studies indicate that the proposed intermolecular multiple H-bonds (up to duodecuple) are readily introduced in polyurethane. A record-high tensile strength (105.2 MPa) is achieved alongside outstanding toughness (352.1 MJ m-3), fracture energy (480.7 kJ m-2), and fatigue threshold (2978.4 J m-2). Meantime, the polyurethane has acquired excellent self-healability and recyclability. This strategy is also applicable to nonpolar polymers, such as polydimethylsiloxane, whose strength (15.3 MPa) and toughness (50.3 MJ m-3) are among the highest reported to date for silicones. This new technique has good expandability and can be used to develop even more and stronger polymers.

Four new species in the Tremellafibulifera complex (Tremellales, Basidiomycota).

Samples of species close to Tremellafibulifera from China and Brazil are studied, and T.fibulifera is confirmed as a species complex including nine species. Five known species (T.cheejenii, T.fibulifera s.s., T. "neofibulifera", T.lloydiae-candidae and T.olens) and four new species (T.australe, T.guangxiensis, T.latispora and T.subfibulifera) in the complex are recognized based on morphological characteristics, molecular evidence, and geographic distribution. Sequences of eight species of the complex were included in the phylogenetic analyses because T.olens lacks molecular data. The phylogenetic analyses were performed by a combined sequence dataset of the internal transcribed spacer (ITS) and the partial nuclear large subunit rDNA (nLSU), and a combined sequence dataset of the ITS, partial nLSU, the small subunit mitochondrial rRNA gene (mtSSU), the translation elongation factor 1-α (TEF1), the largest and second largest subunits of RNA polymerase II (RPB1 and RPB2). The eight species formed eight independent lineages with robust support in phylogenies based on both datasets. Illustrated description of the six species including Tremellafibulifera s.s., T. "neofibulifera" and four new species, and discussions with their related species, are provided. A table of the comparison of the important characteristics of nine species in the T.fibulifera complex and a key to the whitish species in Tremella s.s. are provided.

Global Diversity and Updated Phylogeny of Auricularia (Auriculariales, Basidiomycota).

Auricularia has a worldwide distribution and is very important due to its edibility and medicinal properties. Morphological examinations and multi-gene phylogenetic analyses of 277 samples from 35 countries in Asia, Europe, North and South America, Africa, and Oceania were carried out. Phylogenetic analyses were based on ITS, nLSU, rpb1, and rpb2 sequences using methods of Maximum Likelihood and Bayesian Inference analyses. According to the morphological and/or molecular characters, 37 Auricularia species were identified. Ten new species, A. camposii and A. novozealandica in the A. cornea complex, A. australiana, A. conferta, A. lateralis, A. pilosa and A. sinodelicata in the A. delicata complex, A. africana, A. srilankensis, and A. submesenterica in the A. mesenterica complex, are described. The two known species A. pusio and A. tremellosa, respectively belonging to the A. mesenterica complex and the A. delicata complex, are redefined, while A. angiospermarum, belonging to the A. auricula-judae complex, is validated. The morphological characters, photos, ecological traits, hosts and geographical distributions of those 37 species are outlined and discussed. Morphological differences and phylogenetic relations of species in five Auricularia morphological complexes (the A. auricula-judae, the A. cornea, the A. delicata, the A. fuscosuccinea and the A. mesenterica complexes) are elaborated. Synopsis data on comparisons of species in the five complexes are provided. An identification key for the accepted 37 species is proposed.

Imparting External Stress-Free Two-Way Shape Memory Effect to Commodity Polyolefins by Manipulation of Their Hierarchical Structures.

Two simple methods are proposed to respectively impart external force-free reversible shape memory effect to commercial polyolefins: ultrahigh molecular weight polyethylene (UHMWPE) and polypropylene (PP). The key issues lie in the utilization of the partially entangled molecular chains of UHMWPE and the medium crystalline phases of PP as the reversible internal stress providers. The acquired reversible shape memory effect further proves to be applicable for assisting repeatedly self-healing of wider cracks. Compared to the conventional approaches, which used to introduce cross-linkages into the target materials, the present ones only need physical treatment, so that the valuable thermoplasticity of polyolefins is retained. This work can be regarded as an example of the concept "physically converting instead of chemically modifying" for the preparation of functional polymeric materials based on market available plastics.

External Stress-Free Reversible Multiple Shape Memory Polymers.

The present work is focused on developing external stress-free two-way triple shape memory polymers (SMPs). Accordingly, a series of innovative approaches are proposed for the material design and preparation. Polyurethane prepolymers carrying crystalline polytetrahydrofuran (PTMEG) and poly(ε-caprolactone) (PCL) as the switching phases are respectively synthesized in advance and then cross-linked to produce the target material. The stepwise method is believed to be conducive to manipulation of the relative contribution of PCL and PTMEG. Moreover, the chain extender, 2-amino-5-(2-hydroxyethyl)-6-methylpyrimidin-4-ol (UPy), is incorporated to establish hydrogen bonds among the macromolecules. By straightforward stretching treatment at different temperatures, the hydrogen bond networks are successfully converted into an internal stress provider, which overcomes the challenge of stress relaxation of the melted low melting temperature polymer (i.e., PTMEG) and increases the efficiency of stress transfer. Meanwhile, the contraction force of the switching phases is tuned to match the internal tensile stress. As a result, the internal stress provider can closely collaborate with melting/recrystallization of the crystalline domains, leading to the repeated multiple shape memory effects. The cross-linked polyurethane is thus able to reversibly morph among three shapes and displays its potentials as soft robot and actuator. The strategy reported here has the advantages of easily accessible raw materials, simple reaction, and facile programing/deprograming/reprograming, so that it possesses wide applicability.

Repeated Intrinsic Self-Healing of Wider Cracks in Polymer via Dynamic Reversible Covalent Bonding Molecularly Combined with a Two-Way Shape Memory Effect.

To enable repeated intrinsic self-healing of wider cracks in polymers, a proof-of-concept approach is verified in the present work. It operates through two-way shape memory effect (SME)-aided intrinsic self-healing. Accordingly, a reversible C-ON bond is introduced into the main chain of crosslinked polyurethane (PU) containing an elastomeric dispersed phase (styrene-butadiene-styrene block copolymer, SBS). The PU/SBS blend was developed by the authors recently, and proved to possess an external stress-free two-way SME after programming. As a result, the thermal retractility offered by the SME coupled with the reversible C-ON bonds can be used for successive crack closure and remending based on synchronous fission/radical recombination of C-ON bonds. Moreover, multiwalled carbon nanotubes are incorporated to impart electrical conductivity to the insulating polymer. Repeated autonomic healing of wider cracks is thus achieved through narrowing of cracks followed by chemical rebonding under self-regulating Joule heating. No additional programming is needed after each healing event, which is superior to one-way SME-assisted self-healing. The outcomes set an example of integrating different stimuli-responsivities into single materials.