Effects of Epitranscriptomic RNA Modifications on the Catalytic Activity of the SARS-CoV-2 Replication Complex.

SARS-CoV-2 causes individualized symptoms. Many reasons have been given. We propose that an individual's epitranscriptomic system could be responsible as well. The viral RNA genome can be subject to epitranscriptomic modifications, which can be different for different individuals, and thus epitranscriptomics can affect many events including RNA replication differently. In this context, we studied the effects of modifications including pseudouridine (Ψ), 5-methylcytosine (m5 C), N6-methyladenosine (m6 A), N1-methyladenosine (m1 A) and N3-methylcytosine (m3 C) on the activity of SARS-CoV-2 replication complex (SC2RC). We found that Ψ, m5 C, m6 A and m3 C had little effect, whereas m1 A inhibited the enzyme. Both m1 A and m3 C disrupt canonical base pairing, but they had different effects. The fact that m1 A inhibits SC2RC implies that the modification can be difficult to detect. This fact also implies that individuals with upregulated m1 A including cancer, obesity and diabetes patients might have milder symptoms. However, this contradicts clinical observations. Relevant discussions are provided.

PEGylated Dmoc phosphoramidites for sensitive oligodeoxynucleotide synthesis.

Sensitive oligodeoxynucleotides (ODNs) can be synthesized using Dmoc phosphoramidites, but only short ODNs were demonstrated. Here, we report the synthesis of much longer ODNs, which was made possible by the use of PEGylated Dmoc (pDmoc) phosphoramidites. The longer ODNs synthesized include those containing the sensitive 4acC epigenetic modification recently discovered in nature.

Long oligodeoxynucleotides: chemical synthesis, isolation via catching-by-polymerization, verification via sequencing, and gene expression demonstration.

Long oligodeoxynucleotides (ODNs) are segments of DNAs having over one hundred nucleotides (nt). They are typically assembled using enzymatic methods such as PCR and ligation from shorter 20 to 60 nt ODNs produced by automated de novo chemical synthesis. While these methods have made many projects in areas such as synthetic biology and protein engineering possible, they have various drawbacks. For example, they cannot produce genes and genomes with long repeats and have difficulty to produce sequences containing stable secondary structures. Here, we report a direct de novo chemical synthesis of 400 nt ODNs, and their isolation from the complex reaction mixture using the catching-by-polymerization (CBP) method. To determine the authenticity of the ODNs, 399 and 401 nt ODNs were synthesized and purified with CBP. The two were joined together using Gibson assembly to give the 800 nt green fluorescent protein (GFP) gene construct. The sequence of the construct was verified via Sanger sequencing. To demonstrate the potential use of the long ODN synthesis method, the GFP gene was expressed in E. coli. The long ODN synthesis and isolation method presented here provides a pathway to the production of genes and genomes containing long repeats or stable secondary structures that cannot be produced or are highly challenging to produce using existing technologies.

Stepwise PEG synthesis featuring deprotection and coupling in one pot.

The stepwise synthesis of monodisperse polyethylene glycols (PEGs) and their derivatives usually involves using an acid-labile protecting group such as DMTr and coupling the two PEG moieties together under basic Williamson ether formation conditions. Using this approach, each elongation of PEG is achieved in three steps - deprotection, deprotonation and coupling - in two pots. Here, we report a more convenient approach for PEG synthesis featuring the use of a base-labile protecting group such as the phenethyl group. Using this approach, each elongation of PEG can be achieved in two steps - deprotection and coupling - in only one pot. The deprotonation step, and the isolation and purification of the intermediate product after deprotection using existing approaches are no longer needed when the one-pot approach is used. Because the stepwise PEG synthesis usually requires multiple PEG elongation cycles, the new PEG synthesis method is expected to significantly lower PEG synthesis cost.

Sensitive Oligodeoxynucleotide Synthesis Using Dim and Dmoc as Protecting Groups.

In traditional oligodeoxynucleotide (ODN) synthesis, phosphate groups are protected with the 2-cyanoethyl group, and amino groups are protected with acyl groups. At the end of ODN synthesis, deprotection is achieved with strong bases and nucleophiles. Therefore, traditional technologies are not suitable for the synthesis of ODNs containing sensitive functionalities. To address the problem, we report the use of Dim and Dmoc groups, which are based on the 1,3-dithian-2-yl-methyl function, for phosphate and amine protection for the solid phase ODN synthesis. Using the new Dim-Dmoc protection, deprotection was achieved under mild oxidative conditions without using any strong bases and nucleophiles. As a result, the new technology is suitable for the synthesis of ODNs containing sensitive functions. To demonstrate feasibility, seven 20-mer ODNs including four that contain sensitive ester and alkyl chloride groups were synthesized, purified with RP HPLC, and characterized with MALDI-TOF MS and enzyme digestion essays. High purity ODNs were obtained.

Linear Oligosulfoxides: Synthesis and Solubility Studies.

Synthesis of three linear oligosulfoxides containing up to six sulfoxide groups was achieved by multiple SN2 reactions between an alkanethiol and alkyl tosylate to give a linear oligosulfide followed by oxidation of the oligosulfide with sodium periodate to give an oligosulfoxide. The challenge of complete avoidance of partial oxidation and over oxidation was easily overcome using the sodium periodate oxidation conditions. Although sulfoxide is a highly polar functional group, the oligosulfoxides were found to have limited solubility in many solvents including DMSO and water, which disobeys the "like dissolves like" rule. The surprising solubility pattern of oligosulfoxides was discussed in the context of the drastically different solubility patterns of polyethylene glycol (PEG), poly(butylene oxide), and poly(methylene oxide). According to a dissolution model, solubility properties of linear oligomers including the oligosulfoxides and PEGs may be heavily affected by their conformations and the suitability of their conformations in water for maximizing attractive interactions between them and water. Based on these hypotheses, the limited solubility of the present oligosulfoxides may not imply the low solubility of similar molecules.

Electrophilic oligodeoxynucleotide synthesis using dM-Dmoc for amino protection.

Solid-phase synthesis of electrophilic oligodeoxynucleotides (ODNs) was achieved using dimethyl-Dmoc (dM-Dmoc) as amino protecting group. Due to the high steric hindrance of the 2-(propan-2-ylidene)-1,3-dithiane side product from deprotection, the use of excess nucleophilic scavengers such as aniline to prevent Michael addition of the side product to the deprotected ODN during ODN cleavage and deprotection was no longer needed. The improved technology was demonstrated by the synthesis and characterization of five ODNs including three modified ones. The modified ODNs contained the electrophilic groups ethyl ester, α-chloroamide, and thioester. Using the technology, the sensitive groups can be installed at any location within the ODN sequences without using any sequence- or functionality-specific conditions and procedures.

dM-Dim for Carboxylic Acid Protection.

The 1,3-dithian-2-yl-methyl (Dim) and its analogous groups including dimethyl-Dim (dM-Dim) can provide a new dimension of orthogonality for carboxylic acid protection. They can be deprotected under nearly neutral oxidative conditions. In this paper, the protection of carboxylic acid with dM-Dim, deprotection of dM-Dim ester with sodium periodate, stability of dM-Dim protected carboxylic acid under acidic and basic conditions, and selective deprotection of dM-Dim protected carboxylic acids in the presence of tertiary butyl and methyl esters are presented.

An amine protecting group deprotectable under nearly neutral oxidative conditions.

The 1,3-dithiane-based dM-Dmoc group was studied for the protection of amino groups. Protection was achieved under mild conditions for aliphatic amines, and under highly reactive conditions for the less reactive arylamines. Moderate to excellent yields were obtained. Deprotection was performed by oxidation followed by treating with a weak base. The yields were good to excellent. The new amino protecting group offers a different dimension of orthogonality in reference to the commonly used amino protecting groups in terms of deprotection conditions. It is expected to allow a collection of transformations to be carried out on the protected substrates that are unattainable using any known protecting groups.

Solid Phase Stepwise Synthesis of Polyethylene Glycols.

Polyethylene glycol (PEG) and derivatives with eight and twelve ethylene glycol units were synthesized by stepwise addition of tetraethylene glycol monomers on a polystyrene solid support. The monomer contains a tosyl group at one end and a dimethoxytrityl group at the other. The Wang resin, which contains the 4-benzyloxy benzyl alcohol function, was used as the support. The synthetic cycle consists of deprotonation, Williamson ether formation (coupling), and detritylation. Cleavage of PEGs from solid support was achieved with trifluoroacetic acid. The synthesis including monomer synthesis was entirely chromatography-free. PEG products including those with different functionalities at the two termini were obtained in high yields. The products were analyzed with ESI and MALDI-TOF MS and were found close to monodispersity.

Evidence of Splitting 1,2,3-Triazole into an Alkyne and Azide by Low Mechanical Force in the Presence of Other Covalent Bonds.

The cycloaddition reaction of an alkyne and azide to form a 1,2,3-triazole is widely used in many areas. However, the stability of the triazole moiety under mechanical stress is unclear. To see if a triazole could be selectively split into an alkyne and azide in the presence of other typical covalent bonds, a mica surface functionalized with a molecule containing a triazole moiety in the middle and an activated ester at the end was prepared. An atomic force microscope (AFM) tip with amino groups on its surface was ramped over the mica surface at predefined locations, which could temporarily link the tip to the surface through amide bond formation. During retraction, the triazole or another bond in the linkage broke, and a force was recorded. The forces varied widely at different ramps from close to 0 pN to 860 pN due to nonspecific adhesions and to the inherent inconsistency of single bond rupture. If some of the forces were from triazole cycloreversion, there would be alkynes at the predefined ramping locations. The surface was reacted with an azide carboxylic acid followed by labeling with amino Au nanoparticles (AuNPs). AFM imaging revealed AuNPs at the predicted locations, which provided evidence that under certain conditions triazole could be split selectively in the presence of other bonds at forces below 860 pN.

Tritylation of Alcohols under Mild Conditions without Using Silver Salts.

Secondary alcohols were conveniently tritylated under mild conditions within a short running time with tritylium trifluoroacetate generated in situ from trityl alcohols and trifluoroacetic anhydride. No expensive silver salts were needed for the reactions. Four secondary alcohols were tritylated with both mono- and dimethoxy trityl alcohols giving good to excellent isolated yields. The reaction was also tested on four nucleoside derivatives that have primary alcohols. Satisfactory results were also obtained.

Peptide and peptide nucleic acid syntheses using a DNA/RNA synthesizer.

The use of an ABI 394 DNA/RNA synthesizer for peptide and peptide nucleic acid (PNA) syntheses is described. No additional physical part or software is needed for the application. A commercially available large DNA synthesis column was used, and only about half of its volume was filled with resin when the resin was fully swollen. With additional space in the top portion of the column, agitation of reaction mixture was achieved by bubbling argon from the bottom without losing solution. Removing solutions from column was achieved by flushing argon from top to bottom. Two peptide and two PNA sequences were synthesized. Good yields were obtained in all the cases. The method is easy to follow by researchers who are familiar with DNA/RNA synthesizer.

Oligodeoxynucleotide Synthesis Under Non-Nucleophilic Deprotection Conditions.

This protocol describes a method for the incorporation of sensitive functional groups into oligodeoxynucleotides (ODNs). The nucleophile-sensitive epigenetic N4-acetyldeoxycytosine (4acC) DNA modification is used as an example, but other sensitive groups can also be incorporated, e.g., alkyl halide, α-haloamide, alkyl ester, aryl ester, thioester, and chloropurine groups, all of which are unstable under the basic and nucleophilic deprotection and cleavage conditions used in standard ODN synthesis methods. The method uses a 1,3-dithian-2-yl-methoxycarbonyl (Dmoc) group that carries a methyl group at the carbon of the methoxy moiety (meDmoc) for the protection of exo-amines of nucleobases. The growing ODN is anchored to a solid support via a Dmoc linker. With these protecting and linking strategies, ODN deprotection and cleavage are achieved without using any strong bases and nucleophiles. Instead, they can be carried out under nearly neutral non-nucleophilic oxidative conditions. To increase the length of ODNs that can be synthesized using the meDmoc method, the protocol also describes the synthesis of a PEGylated Dmoc (pDmoc) phosphoramidite. With some of the nucleotides being incorporated with pDmoc-CE phosphoramidite, the growing ODN on the solid support carries PEG moieties and becomes more soluble, thus enabling longer ODN synthesis. The ODN synthesis method described in this protocol is expected to make many sensitive ODNs that are difficult to synthesize accessible to researchers in multiple areas, such as epigenetics, nanopore sequencing, nucleic acid-protein interactions, antisense drug development, DNA alkylation carcinogenesis, and DNA nanotechnology. © 2024 Wiley Periodicals LLC. Basic Protocol: Sensitive ODN synthesis Support Protocol 1: Synthesis of meDmoc-CE phosphoramidites Support Protocol 2: Synthesis of a pDmoc-CE phosphoramidite.

The distribution of Van Genuchten model parameters on soil-water characteristic curves in Chinese Loess Plateau and new predicting method on unsaturated permeability coefficient of loess.

The unsaturated permeability coefficients are often used to solve geotechnical problems associated with unsaturated soils. But it is very difficult to measure. However, the unsaturated permeability coefficients can be predicted by the Soil-water Characteristic Curves (SWCCs). The Van Genuchten Model (VG model) is very rife as it's smooth and good fitting, thus, it has the most research data. Therefore, the research data on VG model parameters (α, n, θs and θr) of Malan loess in Chinese Loess Plateau are collected in the past two decades to obtain the spatial distribution characteristics of parameters. The trend surface analysis method is employed to clarify the regional scale distribution and the variation regular pattern on ArcGIS. Then the linear regression method is utilized to fit the relationship between suction and water content in three different regions of Chinese Loess Plateau, which is divided according to the properties and particle gradation. By using this relationship and the trend surface analysis contour map, the unsaturated permeability coefficient of the sample can be predicted after measuring the saturated permeability coefficient. The example verification shows that the difference between the prediction results and the experimental results is very small when the sample has the lower saturation, and the deviation is slightly larger if it has the higher saturation, but they are all within the acceptable range. This method not only saves the test cost, but also considers the physical properties of the loess in the three different regions of the Loess Plateau. With the improvement of data and the gradual improvement of sampling density, the prediction accuracy will gradually improve. It can provide convenience for solving the engineering problems of loess and water and other engineering applications.

Oligonucleotide synthesis under mild deprotection conditions.

Over a hundred non-canonical nucleotides have been found in DNA and RNA. Many of them are sensitive toward nucleophiles. Because known oligonucleotide synthesis technologies require nucleophilic conditions for deprotection, currently there is no suitable technology for their synthesis. The recently disclosed method regarding the use of 1,3-dithian-2-yl-methyl (Dim) for phosphate protection and 1,3-dithian-2-yl-methoxycarbonyl (Dmoc) for amino protection can solve the problem. With Dim-Dmoc protection, oligodeoxynucleotide (ODN) deprotection can be achieved with NaIO4 followed by aniline. Some sensitive groups have been determined to be stable under these conditions. Besides serving as a base, aniline also serves as a nucleophilic scavenger, which prevents deprotection side products from reacting with ODN. For this reason, excess aniline is needed. Here, we report the use of alkyl Dim (aDim) and alkyl Dmoc (aDmoc) for ODN synthesis. With aDim-aDmoc protection, deprotection is achieved with NaIO4 followed by K2CO3. No nucleophilic scavenger such as aniline is needed. Over 10 ODNs including one containing the highly sensitive N4-acetylcytidine were synthesized. Work on extending the method for sensitive RNA synthesis is in progress.

Dissolve-spin: Desalting oligonucleotides for MALDI MS analysis.

Desalting oligonucleotides (ONs) for matrix-assisted laser desorption ionization mass spectrometry (MALDI MS) analysis was achieved using a simple dissolve-spin approach. The ON is dissolved in an organic solvent. Insoluble salts are removed by centrifugation. ONs are highly polar molecules and are generally believed insoluble in organic solvents with moderate polarity such as acetonitrile (ACN), 1,4-dioxane, ethyl acetate, and THF. However, we found that in the presence of a suitable proton source such as pyridinium chloride, a quantity of ON that is sufficient for MALDI MS analysis could be dissolved. Because inorganic salts are insoluble in such relatively non-polar solvents, the finding can be utilized for desalting ONs for MALDI MS analysis. Comparisons of MS spectra of intentionally salted ONs that underwent the new desalting procedure with those that did not undergo the procedure provided unambiguous evidence that the desalting method is highly effective.

Determination of optical density (OD) of oligodeoxynucleotide from HPLC peak area.

Oligodeoxynucleotides (ODNs) are typically purified and analysed with HPLC equipped with a UV-Vis detector. Quantities of ODNs are usually determined using a UV-Vis spectrometer separately after HPLC, and are reported as optical density at 260 nm (OD260). Here, we describe a method for direct determination of OD260 of ODNs using the area of the peaks in HPLC profiles. It is expected that the method will save significant time for researchers in the area of nucleic acid research, and minimize the loss of oligonucleotide samples.

Dim and Dmoc Protecting Groups for Oligodeoxynucleotide Synthesis.

This protocol provides details for the preparation of nucleoside phosphoramidites with 1,3-dithian-2-yl-methyl (Dim) and 1,3-dithian-2-yl-methoxycarbonyl (Dmoc) as protecting groups, and a linker with Dmoc as the cleavable function, then using them for solid phase synthesis of sensitive oligodeoxynucleotides (ODNs). Using these Dim-Dmoc phosphoramidites and Dmoc linker, ODN synthesis can be achieved under typical conditions using phosphoramidite chemistry with slight modifications, and ODN deprotection and cleavage can be achieved under mild conditions involving oxidation with sodium periodate at pH 4 followed by aniline at pH 8. Under the mild deprotection and cleavage conditions, many sensitive functional groups including but not limited to esters, thioesters, alkyl halides, N-aryl amides, and α-chloroamides-which cannot survive the basic and nucleophilic deprotection and cleavage conditions such as concentrated ammonium hydroxide and dilute potassium methoxide used in typical ODN synthesis technologies-can survive. Thus, it is expected that the Dim-Dmoc ODN synthesis technology will find applications in the synthesis of ODNs that contain a wide range of sensitive functional groups. © 2020 Wiley Periodicals LLC. Basic Protocol: Synthesis, deprotection, cleavage, and purification of sensitive oligodeoxynucleotides Support Protocol 1: Synthesis of Dim-Dmoc nucleoside phosphoramidites Support Protocol 2: Preparation of CPG with a Dmoc linker Support Protocol 3: Synthesis of a phosphoramidite containing a sensitive alkyl ester group.

Incorporation of Sensitive Ester and Chloropurine Groups into Oligodeoxynucleotides through Solid Phase Synthesis.

Nucleosides containing ester groups that are sensitive to nucleophiles were incorporated into oligodeoxynucleotides (ODNs) through solid phase chemical synthesis. The sensitive esters are located on a purine nucleobase. They are the esters of ethyl, 2-methoxyethyl, 4-methoxyphenyl and phenyl groups, and a thioester. These esters cannot survive the deprotection and cleavage conditions used in known ODN synthesis technologies, which involve strong nucleophiles such as ammonium hydroxide and potassium methoxide (potassium carbonate in anhydrous methanol). To incorporate these sensitive groups into ODNs, the Dmoc phosphoramidites and linker were used for solid phase synthesis, which allowed ODN deprotection and cleavage to be carried out under non-nucleophilic oxidative conditions. Sixteen ODN sequences containing these groups were synthesized and characterized with MALDI MS. In addition, the synthesis and characterization of three ODNs containing a nucleophile sensitive 6-chloropurine using the same strategy are described.