RESUMEN
Herein, we report the synthesis of inclusion complexes (ICs) based on 3,4-ethylenedioxythiophene (EDOT) with permethylated ß-cyclodextrins (TMe-ßCD) and permethylated γ-cyclodextrins (TMe-γCD) host molecules. To prove the synthesis of such ICs, molecular docking simulation, UV-vis titrations in water, 1H-NMR, and H-H ROESY, as well as matrix-assisted laser desorption ionization mass spectroscopy (MALDI TOF MS) and thermogravimetric analysis (TGA) were carried out on each of the EDOTâTMe-ßCD and EDOTâTMe-γCD samples. The results of computational investigations reveal the occurrence of hydrophobic interactions, which contribute to the insertion of the EDOT guest inside the macrocyclic cavities and a better binding of the neutral EDOT to TMe-ßCD. The H-H ROESY spectra show correlation peaks between H-3 and H-5 of hosts and the protons of the guest EDOT, suggesting that the EDOT molecule is included inside the cavities. The MALDI TOF MS analysis of the EDOTâTMe-ßCD solutions clearly reveals the presence of MS peaks corresponding to sodium adducts of the species associated with the complex formation. The IC preparation shows remarkable improvements in the physical properties of EDOT, rendering it a plausible alternative to increasing its aqueous solubility and thermal stability.
RESUMEN
In the present study, we investigated the effect of permodified 2,3,6-tri-O-trimethylsilyl ß- and γ-cyclodextrin (TMS·ß-CD, TMS·Î³-CD) encapsulation on the optical, electrochemical, morphological, and supramolecular arrangements of a poly[2,7'-(9,9-dioctylfluorene-alt-2',7-fluorene)] PF copolymer. For this purpose, the photophysical properties and Langmuir monolayer formation of PF·TMS·ß-CD and PF·TMS·Î³-CD polyrotaxanes were investigated and compared with those of the reference PF. Surface pressure-area isotherms and Brewster angle microscopy studies indicated the capability of both polyrotaxanes to organize into larger and homogeneous 2D supramolecular assemblies at the air-water interface. The obtained results suggest that the presence of the surrounding TMS·ß-CD and TMS·Î³-CD macrocycles on the PF backbones leads to changes in the conformation and hydrophobicity of the film surfaces. Our investigation offers a method to assess the impact of TMS-CD encapsulation on the control of 2D monolayer formation, with particular attention on the generation of stable PF monolayers for organic electronic devices.
Asunto(s)
Ciclodextrinas , Rotaxanos , Microscopía , Propiedades de Superficie , AguaRESUMEN
Two alternating polyfluorene polyrotaxanes (3·TM-ßCD and 3·TM-γCD) have been synthesized by the coupling of 2,7-dibromofluorene encapsulated into 2,3,6-tri-O-methyl-ß- or γ-cyclodextrin (TM-ßCD, TM-γCD) cavities with 9,9-dioctylfluorene-2,7-diboronic acid bis(1,3-propanediol) ester. Their optical, electrochemical and morphological properties have been evaluated and compared to those of the non-rotaxane counterpart 3. The influence of TM-ßCD or TM-γCD encapsulation on the thermal stability, solubility in common organic solvents, film forming ability was also investigated. Polyrotaxane 3·TM-ßCD exhibits a hypsochromic shift, while 3·TM-γCD displays a bathochromic with respect to the non-rotaxane 3 counterpart. For the diluted CHCl3 solutions the fluorescence lifetimes of all compounds follow a mono-exponential decay with a time constant of ≈0.6 ns. At higher concentration the fluorescence decay remains mono-exponential for 3·TM-ßCD and polymers 3, with a lifetime τ = 0.7 ns and 0.8 ns, whereas the 3·TM-γCD polyrotaxane shows a bi-exponential decay consisting of a main component (with a weight of 98% of the total luminescence) with a relatively short decay constant of τ1 = 0.7 ns and a minor component with a longer lifetime of τ2 = 5.4 ns (2%). The electrochemical band gap (ΔE g ) of 3·TM-ßCD polyrotaxane is smaller than that of 3·TM-γCD and 3, respectively. The lower ΔE g value for 3·TM-ßCD suggests that the encapsulation has a greater effect on the reduction process, which affects the LUMO energy level value. Based on AFM analysis, 3·TM-ßCD and 3·TM-γCD polyrotaxane compounds exhibit a granular morphology with lower dispersity and smaller roughness exponent of the film surfaces in comparison with those of the neat copolymer 3.
RESUMEN
We report on the synthesis as well as the optical, electrochemical and morphological properties of two polyrotaxanes (4a and 4b), which consist of electron-accepting 9,9-dicyanomethylenefluorene 1 as an inclusion complex in persilylated ß- or γ-cyclodextrin (TMS-ß-CD, TMS-γ-CD) (1a, 1b) and methyltriphenylamine as an electron-donating molecule. They are statistically distributed into the conjugated chains of 9,9-dioctylfluorene 3 and compared with those of the corresponding non-rotaxane 4 counterpart. Rotaxane formation results in improvements of the solubility, the thermal stability, and the photophysical properties. Polyrotaxanes 4a and 4b exhibited slightly red-shifted absorption bands with respect to the non-rotaxane 4 counterpart. The fluorescence lifetimes of polyrotaxanes follow a mono-exponential decay with a value of τ = 1.14 ns compared with the non-rotaxane, where a bi-exponential decay composed of a main component with a relative short time of τ1 = 0.88 (57.08%) and a minor component with a longer lifetime of τ2 = 1.56 ns (42.92%) were determined. The optical and electrochemical band gaps (ΔE g) as well as the ionization potential and electronic affinity characterized by smaller values compared to the values of any of the constituents. AFM reveals that the film surface of 4a and 4b displays a granular morphology with a lower dispersity supported by a smaller roughness exponent compared with the non-rotaxane counterpart.
RESUMEN
Herein, we report the thermal transitions and structural properties of poly(3,4-ethylenedioxythiophene/cucurbit[7]uril) pseudopolyrotaxane (PEDOTâCB7-PS) and polyrotaxane (PEDOTâCB7-PR) thin films compared with those of pristine PEDOT. The structural characteristics were investigated by using variable-temperature spectroscopic ellipsometry (VTSE), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and atomic force microscopy (AFM). VTSE and DSC results indicated the presence of an endothermic process and glass transition in the PEDOTâCB7-PS and PEDOTâCB7-PR thin films. X-ray diffraction of PEDOTâCB7-PS and PEDOTâCB7-PR powders displayed the presence of interchain π-π stacking revealing a characteristic arrangement of aromatic rings in the internal structure of the crystallites. AFM imaging of PEDOTâCB7-PS and PEDOTâCB7-PR thin films exhibited significant differences in the surface topographies compared with those of PEDOT. A high degree of crystallization was clearly visible on the surface of the PEDOT layer, whereas the PEDOTâCB7-PS and PEDOTâCB7-PR thin films exhibited more favorable surface parameters. Such significant differences identified in the surface morphology of the investigated layers can, therefore, be clearly associated with the presence of surrounding CB7 on PEDOT skeletons.
RESUMEN
New composite materials were prepared via cross-linking of polyethylene glycol/2-hydroxypropyl-ß-cyclodextrins polyrotaxane (PEG/HPßCD) and polyisoprene/HPßCD semi-polyrotaxane (PI/HPßCD SR) with 1,6-hexamethylene diizocyanate (HMDI). Advanced instrumental methods (such WAXS (wide angle X-ray scattering), AFM (atomic force microscopy), SEM (scanning electron microscopy), and thermal and dynamic vapor sorption) were employed for the structural, morphological and thermal characterization of the resulting composite materials. The roughness parameters calculated using AFM indicate a smoother surface for the composite material with 10 wt% of PI/HPßCD SR, denoting that a homogeneous film was obtained. SEM analysis reveals porous morphologies for both composite materials and the pore sizes increase with the increasing concentration of PI/HPßCD SR in the matrix. Dynamic vapor sorption/desorption measurements and type IV isotherms confirmed the hydrophilic and porous materials, which are in agreement with SEM analysis. The composite with a higher PI/HPßCD SR concentration in the matrix showed increased thermal stability than that of the pure cross-linked material. This material was further tested as a sorbent for methylene blue (MB) dye removal from an aqueous solution. The adsorption capacity of the composite film was found to be 2.58 mg g-1 at 25 °C.
RESUMEN
Two poly(3,4-ethylenedioxythiophene) polyrotaxanes (PEDOTâTMe-ßCD and PEDOTâTMe-γCD) end-capped by pyrene (Py) were synthesized by oxidative polymerization of EDOT encapsulated into TMe-ßCD or TMe-γCD cavities with iron (III) chloride (FeCl3) in water and chemically characterized. The effect of TMe-ßCD or TMe-γCD encapsulation of PEDOT backbones on the molecular weight, thermal stability, and solubility were investigated in depth. UV-vis absorption, fluorescence (FL), phosphorescence (PH), quantum efficiencies, and lifetimes in water and acetonitrile were also explored, together with their surface morphology and electrical properties. Furthermore, dynamic light scattering was used to study the hydrodynamic diameter (DH) and z-potential (ZP-ζ) of the water soluble fractions of PEDOTâTMe-ßCD and PEDOTâTMe-γCD. PEDOTâTMe-ßCD and PEDOTâTMe-γCD exhibited a sharp monodisperse peak with a DH of 55 ± 15 nm and 122 ± 32 nm, respectively. The ZP-ζ value decreased from -31.23 mV for PEDOTâTMe-ßCD to -20.38 mV for PEDOTâTMe-γCD, indicating that a negatively charged layer covers their surfaces. Surface pressure-area isotherms and Brewster angle microscopy (BAM) studies revealed the capability of the investigated compounds to organize into sizeable and homogeneous 2D supramolecular assemblies at the air-water interface. The control of the 2D monolayer organization through the thermodynamic parameters of PEDOTâTMe-ßCD and PEDOTâTMe-γCD suggests potential for a wide range of optoelectronic applications.
RESUMEN
The paper reports the preparation of a poly[2,7-(9,9-dioctylfluorene)-alt-5,5'-bithiophene/PS-ßCD] (PDOF-BTc) polyrotaxane copolymer, through a Suzuki coupling reaction between the 5,5(')-dibromo-2,2'-bithiophene (BT) inclusion complex with persilylated ß-cyclodextrin (PS-ßCD), and 9,9-dioctylfluorene-2,7-bis(trimethylene borate) (DOF) as the blocking group. The chemical structure and the thermal and morphological properties of the resulting polyrotaxane were investigated by using NMR and FT-IR spectroscopy, TGA, DSC and AFM analysis. The encapsulation of BT inside the PS-ßCD cavity results in improvements in the solubility, as well as in different surface morphology and thermal properties of the PDOF-BTc rotaxane copolymer compared to its noncomplexed PDOF-BT homologue. In contrast, the number-average molecular weight (M(n)) of PDOF-BTc rotaxane copolymer indicated lower values suggesting that the condensation reaction is subjected to steric effects of the bulkier silylated groups, affecting the ability of the diborate groups from the DOF molecule to partially penetrate the PS-ßCD cavity.
RESUMEN
Anionic polymerization initiated by cyclodextrins suffers from a poor solubility of those derivatives in standard polymerization solvents. The possibility to perform ethylene oxide polymerization initiated by monofunctional initiators (allyl alcohol, 2-methoxyethanol) by living ring opening polymerization in DMF, a good solvent for any CD derivative, was demonstrated by SEC, (1)H and (13)C NMR analyses. The study was extended to the use of native CD as initiator, leading to the synthesis of ill-defined structures, explained by the reactivity scale of the various hydroxyl functions. Two selectively modified CD derivatives are then used to synthesize a new family of star-shaped poly(ethylene oxide) polymers with CD core, having 14 or 21 arms. The polymerization was found to be living and DOSY experiments confirmed the well-defined structures for the synthesized star-polymers.