CFD study of self-cleaning system of multi-stage tangential roller threshing unit for precise buckwheat breeding.

Buckwheat is a globally recognized, nutritionally rich crop with robust adaptability, serving as a multi-purpose plant for its health benefits. Achieving precise and mechanized plot seed harvesting is a critical step in obtaining accurate results in breeding experiments. However, plot breeding requires no seed retention, no mixing, and ensures no accumulation of seed in the threshing unit. A self-cleaning technology was developed to prevent seed retention, mixing, and accumulation in the multistage tangential cylinder threshing unit. The newly designed cleaning system has five air inlets and a centrifugal fan for pneumatic cleaning. CFD simulations were conducted for each inlet position, coupled with four varying inlet velocities and the rotation speed of the main threshing cylinder. During the post-processing stage of the CFD modeling, a line consisting of fifty points was drawn beneath the threshing drums, and the air velocity at these points was recorded. The optimal configuration of inlet position, inlet air velocity, and main threshing drum rotation speed for efficient cleaning was identified based on the ratio of points beneath the drums where the airflow speed surpassed the suspension speed of buckwheat to the points where the airflow speed was lower than the suspension speed of buckwheat. The optimal configuration for "inlet_1" was identified based on the suspension velocity of buckwheat grain, with an inlet velocity of 4 m/s and a main threshing drum speed of 450 rpm.

Reverse osmosis membrane functionalized with aminated graphene oxide and polydopamine nanospheres plugging for enhanced NDMA rejection and anti-fouling performance.

The use of reverse osmosis (RO) for water reclamation has become an essential part of the water supply owing to the ever-increasing water demand and the utmost performance of the RO membranes. Despite the global RO implementation, its inferior rejection against low molecular weight contaminants of emerging concerns (CECs) (i.e., N-nitrosodimethylamine (NDMA)) and propensity to fouling remain bottle-neck thus affecting process robustness for water reuse. This study aims to enhance both the rejection and antifouling properties of the RO membrane. Herein for the first time, we report RO membrane modification using polydopamine nanospheres (PDAns) followed by aminated-graphene oxide (AGO) deposition as an effective approach to overcome these challenges. The modification of the RO membrane using PDAns-AGO resulted in 89.3 ± 2.7% rejection compared to the pristine RO membrane which demonstrated 69.2 ± 2.1% NDMA rejection. This significant improvement can be ascribed to the plugging and shielding of defective areas (formed during interfacial polymerization) of the polyamide layer through active PDAns and AGO layers and to the added sieving mechanism that arose through narrow channels of the AGO owing to its reduction. Moreover, the in-situ and non-destructive fouling monitoring using optical coherence tomography (OCT) revealed that the PDAns-AGO coating enhanced both the anti-scaling and anti-biofouling characteristics. The improved hydrophilicity and bactericidal effect together with roughness and surface charge suppression synergistically enhanced anti-fouling properties. This study provides a new direction for safe and cost-effective water reuse practices. The membrane with high selectivity against CECs such as NDMA has the potential to eliminate permeate staging using second pass RO and other advanced oxidation processes which are utilized as a tertiary treatment to make reclaimed water suitable for potable/non-potable application.

Statistical prediction and sensitivity analysis of kinetic rate constants for efficient thermal valorization of plastic waste into combustible oil and gases.

Sensitivity analyses of rate constants for chemical kinetics of the pyrolysis reaction are essential for the efficient valorization of plastic waste into combustible liquids and gases. Finding the role of individual rate constants can provide important information on the process conditions, quality, and quantity of the pyrolysis products. The reaction temperature and time can also be reduced through these analyses. For sensitivity analysis, one possible approach is to estimate the kinetic parameters using MLRM (multiple linear regression model) in SPSS. To date, no research reports on this research gap are documented in the published literature. In this study, MLRM is applied to kinetic rate constants, which slightly differ from experimental data. The experimental and statistically predicted rate constants varied up to 200% from their original values to perform sensitivity analysis using MATLAB software. The product yield was examined after 60 min of thermal pyrolysis at a fixed temperature of 420 °C. The predicted rate constant "k(8)" with a slight difference of 0.02 and 0.04 from the experiment revealed 85% oil yield and 40% light wax after 60 min of operation. The heavy wax was missing from the products under these conditions. This rate constant can be utilized to maximize the commercial-scale extraction of liquids and light waxes from thermal pyrolysis of plastics.

Nanobubbles in water and wastewater treatment systems: Small bubbles making big difference.

Since the discovery of nanobubbles (NBs) in 1994, NBs have been attracting growing attention for their fascinating properties and have been studied for application in various environmental fields, including water and wastewater treatment. However, despite the intensive research efforts on NBs' fundamental properties, especially in the past five years, controversies and disagreements in the published literature have hindered their practical implementation. So far, reviews of NB research have mainly focused on NBs' role in specific treatment processes or general applications, highlighting proof-of-concept and success stories primarily at the laboratory scale. As such, there lacks a rigorous review that authenticates NBs' potential beyond the bench scale. This review aims to provide a comprehensive and up-to-date analysis of the recent progress in NB research in the field of water and wastewater treatment at different scales, along with identifying and discussing the challenges and prospects of the technology. Herein, we systematically analyze (1) the fundamental properties of NBs and their relevancy to water treatment processes, (2) recent advances in NB applications for various treatment processes beyond the lab scale, including over 20 pilot and full-scale case studies, (3) a preliminary economic consideration of NB-integrated treatment processes (the case of NB-flotation), and (4) existing controversies in NBs research and the outlook for future research. This review is organized with the aim to provide readers with a step-by-step understanding of the subject matter while highlighting key insights as well as knowledge gaps requiring research to advance the use of NBs in the wastewater treatment industry.

Advancements in Nanoenabled Membrane Distillation for a Sustainable Water-Energy-Environment Nexus.

The emergence of nano innovations in membrane distillation (MD) has garnered increasing scientific interest. This enables the exploration of state-of-the-art nano-enabled MD membranes with desirable properties, which significantly improve the efficiency and reliability of the MD process and open up opportunities for achieving a sustainable water-energy-environment (WEE) nexus. This comprehensive review provides broad coverage and in-depth analysis of recent innovations in nano-enabled MD membranes, focusing on their role in achieving desirable properties, such as strong liquid-repellence, high resistance to scaling, fouling, and wetting, as well as efficient self-heating and self-cleaning functionalities. The recent developments in nano-enhanced photothermal-catalytic applications for water-energy co-generation within a single MD system are also discussed. Furthermore, the bottlenecks are identified that impede the scale-up of nanoenhanced MD membranes and a future roadmap is proposed for their sustainable commercialiation. This holistic overview is expected to inspire future research and development efforts to fully harness the potential of nano-enabled MD membranes to achieve sustainable integration of water, energy, and the environment.

Plasmonic Titanium Nitride Nano-enabled Membranes with High Structural Stability for Efficient Photothermal Desalination.

Herein, we demonstrate the desalination performance of a solar-driven membrane distillation (MD) process, where upon light illumination, a highly localized heating of plasmonic titanium nitride nanoparticles (TiN NPs) immobilized on a hydrophobic membrane provides the thermal driving force for the MD operation. The engineered TiN photothermal membrane induces vapor generation directly at the feed-membrane interface upon solar irradiation, thereby eliminating the need to heat the entire bulk feed water. The results indicate that the average vapor flux through the TiN photothermal membrane without any auxiliary feed heating was recorded as 1.01 L m-2 h-1, which corresponds to the solar-thermal efficiency of 66.7% under 1 sun solar irradiance. The superior performance of the photothermal MD process is attributed to the broadband optical absorption and excellent light-to-heat conversion properties of the plasmonic TiN NP layer, which enabled efficient interfacial water heating at the membrane surface and increased the net driving force for vapor transport. Results also reveal the high mechanical stability of the TiN photothermal coating layer during long-term photothermal MD operations. We believe that the TiN photothermal membranes fabricated using a relatively inexpensive and nontoxic material via the simple technique with high stability and photothermal conversion efficiency will provide a path forward for developing the solar-driven MD applications.

Nanobubble-assisted scaling inhibition in membrane distillation for the treatment of high-salinity brine.

In this study, we report the use of nanobubbles (NBs) as a simple and facile approach to effectively delay scaling in membrane distillation (MD) during the treatment of highly saline feed (100 g L-1). Unlike conventional gas bubbling in MD for improving the hydrodynamic flow conditions in the feed channel, here we generated air NBs with an average size of 128.81 nm in the feed stream and examined their impact on membrane scaling inhibition during MD operation. Due to their small size, neutral buoyancy, and negative surface charge, NBs remain in suspension for a longer time (14 days), providing homogenous mixing throughout the entire feed water. The MD performance results revealed that severe membrane scaling happened during the DCMD treatment of high salinity brine in the absence of nanobubbles, which dramatically reduced the distillate flux to zero after 13 h. A one-time addition of air NBs in the saline feed significantly reduced salt precipitation and crystal deposition on the PVDF membrane surface, delayed the occurrence of flux decline, prevented membrane wetting, thereby prolonging the effective MD operating time. With similar feed concentration and operating conditions, only 63% flux decline after 98 h operation was recorded in nanobubble-assisted MD. Two key explanations were suggested for the delayed membrane scaling upon addition of air NBs in the MD feed: (1) NB-induced turbulent flow in the feed channel that increases the surface shear forces at the membrane surface, alleviating both temperature and concentration polarization effect, (2) electrostatic attractions of the counterions to the negatively charged NBs, which reduces the availability of these ions in the bulk feed for scale formation.

Macro-corrugated and nano-patterned hierarchically structured superomniphobic membrane for treatment of low surface tension oily wastewater by membrane distillation.

A hierarchically assembled superomniphobic membrane with three levels of reentrant structure was designed and fabricated to enable effective treatment of low surface tension, hypersaline oily wastewaters using direct contact membrane distillation (DCMD). The overall structure is a combination of macro corrugations obtained by surface imprinting, with the micro spherulites morphology achieved through the applied phase inversion method and nano patterns obtained by fluorinated Silica nanoparticles (SiNPs) coating. This resulted in a superomniphobic membrane surface with remarkable anti-wetting properties repelling both high surface tension water and low surface tension oils. Measurements of contact angle (CA) with DI water, an anionic surfactant, oil, and ethanol demonstrated a robust wetting resistance against low surface tension liquids showing both superhydrophobicity and superoleophobicity. CA values of 160.8 ± 2.3° and 154.3 ± 1.9° for water and oil were obtained, respectively. Calculations revealed a high liquid-vapor interface for the fabricated membrane with more than 89% of the water droplet contact area being with air pockets entrapped between adjacent SiNPs and only 11% come into contact with the solid membrane surface. Moreover, the high liquid-vapor interface imparts the membrane with high liquid repellency, self-cleaning and slippery effects, characterized by a minimum droplet-membrane interaction and complete water droplet bouncing on the surface within only 18 ms. When tested in DCMD with synthetic hypersaline oily wastewaters, the fabricated superomniphobic membrane demonstrated stable, non-wetting MD operation over 24 h, even at high concentrations of low surface tension 1.0 mM Sodium dodecyl sulfate and 400 ppm oil, potentially offering a sustainable option for treatment of low surface tension oily industrial wastewater.

Challenges and opportunities in functional carbon nanotubes for membrane-based water treatment and desalination.

Environmental applications of carbon nanotubes (CNTs) have grabbed worldwide attentions due to their excellent adsorption capacities and promising physical, chemical and mechanical properties. The functionalization of CNTs, which involves chemical/physical modification of pristine CNTs with different types of functional groups, improves the capabilities of CNT for desalination and/or removals of waterborne contaminants. This paper intends to provide a comprehensive review of functional CNT materials (f-CNT) and their existing and potential applications in membrane-based water treatment and desalination processes, with focuses on critical evaluation of advances, knowledge gaps and future research directions. CNT nanocomposite membranes have been studied at bench scale to efficiently remove a variety of waterborne contaminants and salts, while future improvement is under way with development in CNT functionalization techniques. The CNT-based membrane applications are found to possess a variety of advantages, including improve water permeability, high selectivity and antifouling capability. However, their applications at full scale are still limited by their high cost. Finally, we highlight that f-CNT membranes with promising removal efficiencies for respective contaminants be considered for commercialization and to achieve holistic performance for the purpose of water treatment and desalination.

Efficient removal of zinc from water and wastewater effluents by hydroxylated and carboxylated carbon nanotube membranes: Behaviors and mechanisms of dynamic filtration.

In this work, a bench scale study was designed to investigate the removal of zinc (Zn2+) and regeneration efficiencies of functionalized-MWCNT (f-MWCNT) membranes. The f-MWCNTs were incorporated into polyvinylchloride (PVC) hollow fiber membranes (HFMs), which acted as a substrate and a barrier for MWCNTs leaching to water. The results revealed that the removal capacity of Zn2+ through f-CNT membranes were above 98% for the synthetic water and over 70% for real wastewater effluents; predominantly involved surface complexation reaction. The acquired removal efficiency of CNT membrane is attributed to high absolute zeta potential followed by the hydrophilicity of the nanotubes coated the inside surface of HFMs and high concentration of oxygen functional groups on CNT surfaces. Later on, different regenerating solutions were used to desorb Zn2+ ions repeatedly from the inner surface of membranes and to recycle the CNT membranes for continuous removal of Zn2+ from water. The XPS analysis revealed that, Zn2+ ions were completely recovered owing to the ion exchange interactions. The results further confirmed that f-CNT membranes retained their original removal capacity after several successive cycles. Therefore, we recommend that, f-CNTs-based membranes have the potential to be used for large-scale removal and recovery of heavy metal ions from water or wastewater.

Mechanistic insight into the in vitro toxicity of graphene oxide against biofilm forming bacteria using laser-induced breakdown spectroscopy.

While the cytotoxicity of graphene oxide (GO) has been well established, its bactericidal mechanism, however, has yet to be elucidated to advance GO-based biomedical and environmental applications. In an attempt to better understand the bactericidal action of GO, herein we studied the interactions of GO with Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus cells using physical techniques and chemical probes, respectively. In particular, a novel laser-induced breakdown spectroscopy (LIBS) based elemental fingerprint analysis revealed notable differences between viable and non-viable cells based on the difference in the concentration of trace inorganic elements in complex bacterial systems, which reflect cellular membrane integrity. Lower emission intensities from essential inorganic ions in the GO-treated cells offered explicit evidence on the efflux of intracellular molecules from the bacteria through damaged cell membranes. Furthermore, a detailed structural and morphological investigation of bacterial membrane integrity confirmed GO-induced membrane stress upon direct contact interactions with bacterial cells, resulting in the disruption of cellular membranes. Moreover, the generation of intracellular reactive oxygen species (ROS) in the presence of an added antioxidant underlined the role of GO-mediated oxidative stress in bacterial cell inactivation. Thus, by correlating the changes in the bacterial elemental compositions with the severe morphological alterations and the high ROS production witnessed herein, we propose that the bactericidal mechanism of GO is likely to be the synergy between membrane and oxidative stress towards both tested species. Our findings offer useful guidelines for the future development of GO-based antibacterial surfaces and coatings.