Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Más filtros

Banco de datos
País/Región como asunto
Tipo del documento
País de afiliación
Intervalo de año de publicación
1.
Environ Res ; 244: 117919, 2024 Mar 01.
Artículo en Inglés | MEDLINE | ID: mdl-38103777

RESUMEN

This study assessed the photoactivity of amorphous and crystalline TiO2 nanotube arrays (TNA) films in gas phase CO2 reduction. The TNA photocatalysts were fabricated by titanium anodization and submitted to an annealing treatment for crystallization and/or cathodic reduction to introduce Ti3+ and oxygen vacancies into the TiO2 structure. The cathodic reduction demonstrated a significant effect on the generated photocurrent. The photoactivity of the four TNA catalysts in CO2 reduction with water vapor was evaluated under UV irradiation for 3 h, where CH4 and H2 were detected as products. The annealed sample exhibited the best performance towards methane with a production rate of 78 µmol gcat-1 h-1, followed by the amorphous film, which also exhibited an impressive formation rate of 64 µmol gcat-1 h-1. The amorphous and reduced-amorphous films exhibited outstanding photoactivity regarding H2 production (142 and 144 µmol gcat-1 h-1, respectively). The annealed catalyst also revealed a good performance for H2 production (132 µmol gcat-1 h-1) and high stability up to five reaction cycles. Molecular dynamic simulations demonstrated the changes in the band structure by introducing oxygen vacancies. The topics covered in this study contribute to the Sustainable Development Goals (SDG), involving affordable and clean energy (SDG#7) and industry, innovation, and infrastructure (SDG#9).


Asunto(s)
Dióxido de Carbono , Nanotubos , Metano , Nanotubos/química , Oxígeno
2.
BMC Public Health ; 22(1): 1153, 2022 06 09.
Artículo en Inglés | MEDLINE | ID: mdl-35681132

RESUMEN

BACKGROUND: New vaccines that are initially approved in clinical trials are not completely free of risks. Systematic vaccine safety surveillance is required for ensuring safety of vaccines. This study aimed to provide a protocol for safety monitoring of COVID-19 vaccines, including Sputnik V, Sinopharm (BBIBP-CorV), COVIran Barekat, and AZD1222. METHODS: This is a prospective cohort study in accordance with a template provided by the World Health Organization. The target population includes citizens of seven cities in Iran who have received one of the available COVID-19 vaccines according to the national instruction on vaccination. The participants are followed for three months after they receive the second dose of the vaccine. For each type of vaccine, 30,000 people will be enrolled in the study of whom the first 1,000 participants are in the reactogenicity subgroup. The reactogenicity outcomes will be followed seven days after vaccination. Any hospitalization, COVID-19 disease, or other minor outcomes will be investigated in weekly follow-ups. The data are gathered through self-reporting of participants in a mobile application or phone calls to them. The study outcomes may be investigated for the third and fourth doses of vaccines. Other long-term outcomes may also be investigated after the expansion of the follow-up period. We have planned to complete data collection for the current objectives by the end 2022. DISCUSSION: The results of this study will be published in different articles. A live dashboard is also available for managers and policymakers. All data will be available on reasonable requests from the corresponding author.The use of the good and comprehensive guidelines provided by WHO, along with the accurate implementation of the protocol and continuous monitoring of the staff performance are the main strengths of this study which may be very useful for policymaking about COVID-19 vaccination.


Asunto(s)
Vacunas contra la COVID-19 , COVID-19 , COVID-19/prevención & control , Vacunas contra la COVID-19/efectos adversos , ChAdOx1 nCoV-19 , Humanos , Irán/epidemiología , Estudios Prospectivos , Proyectos de Investigación , SARS-CoV-2 , Vacunación/efectos adversos
3.
ChemSusChem ; 17(2): e202301033, 2024 Jan 22.
Artículo en Inglés | MEDLINE | ID: mdl-37724580

RESUMEN

Recently, interest in converting bio-derived fatty acid methyl esters (FAMEs) into added-value products has significantly increased. The selectivity of ketonization reaction in the conversion of the FAMEs has significantly hampered the efficiency of this process. Herein, this work reports the preparation of catalysts with different levels of oxygen vacancies while the crystal phase remained unchanged. The catalyst with the highest level of oxygen vacancy exhibited the maximum selectivity. The density functional theory (DFT) simulation showed an increase in interatomic distances leading to the formation of frustrated Lewis pairs (FLPs) upon the creation of oxygen vacancies. The surface measurements, type and density of acid sites of the catalysts, showed that the Lewis acid sites enhanced the selectivity for ketone production; while Bronsted acid sites increased the formation of by-products. Moreover, the ketone formation rate was directly proportional to acid density. The findings of this research provide a different approach for catalyst design, based on defects engineering and their effect on the surface activity, which could be used for enhancing the catalytic performance of novel metal oxides.

4.
ACS Omega ; 9(26): 28018-28027, 2024 Jul 02.
Artículo en Inglés | MEDLINE | ID: mdl-38973934

RESUMEN

In this work, the (TiO2)20 cluster is proposed to adsorb the methylene blue (BM) dye; thus, the quantum parameters to explain the adsorption process are calculated by means of density functional theory calculations. Eight possible configurations are obtained and labeled from M1 to M8. According to the adsorption energy values, they reveal physisorption for at least two cases, and for the rest of the systems, they exhibit chemisorption. The preferential positions that lead to good adsorption for the BM dye are parallel to the semiconductor cluster; however, when one end of the BM dye formed by hydrogen atoms is interacting with the cluster, a weak chemical interaction is reached. The chemical interactions for M4 and M5 systems generate considerable increases of their electronic gap values (E g) with respect to the rest, and this effect is explained based on iso-surfaces of frontier orbitals and electronic charge transference. The chemical interactions between these chemical species are stable under vibrational and thermal criteria. This semiconductor cluster arises as a good candidate to adsorb some dyes like BM.

5.
Chemosphere ; 341: 140130, 2023 Nov.
Artículo en Inglés | MEDLINE | ID: mdl-37690554

RESUMEN

Environmental pollution is one of the main challenges currently faced by mankind; especially industrial waste-waters treatment and remediation using energy-efficient methodologies. This research focused on the electrochemical degradation of the hazardous nitrobenzene (NB) in aqueous solutions, using novel high-entropy oxide (HEO) electrodes to elucidate the influence of the electrochemical reduction step on the degradation process. The effect of solution pH, dissolved oxygen concentration, anodic applied potential, and cell configurations on NB hydrogenation reaction were evaluated. A synergistic effect between the hydrogenation of nitrobenzene and the degradation was found to drastically enhance the conversion rates. The presence of dissolved oxygen promoted the oxidation reactions, reaching more than 90% nitrobenzene removal at 1.7 V and pH 14. The degradation of the organic by-products was attributed to the formation of the superoxide radical (O2*-) as the main oxidant species. A degradation mechanism was proposed based on the detected intermediates and the decoupling of electrochemical surface reactions observed by EIS at different solution pH.


Asunto(s)
Nitrobencenos , Óxidos , Hidrogenación , Entropía , Oxígeno
6.
Chemosphere ; 289: 133170, 2022 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-34875298

RESUMEN

This study investigates the facile fabrication of interfacial defects assisted amorphous TiO2 nanotubes arrays (am-TNTA) for promoting gas-phase CO2 photoreduction to methane. The am-TNTA catalyst was fabricated via a one-step synthesis, without heat treatment, by anodization of Titanium in Ethylene glycol-based electrolyte in a shorter anodizing time. The samples presented a TiO2 nanostructured array with a nanotubular diameter of 100 ± 10 nm, a wall thickness of 26 ± 5 nm, and length of 3.7 ± 0.3 µm, resulting in a specific surface of 0.75 m2 g. The am-TNTA presented prolonged chemical stability, a high exposed surface area, and a large number of surface traps that can reduce the recombination of the charge carriers. The am-TNTA showed promising photoactivity when tested in the CO2 reduction reaction with water under UV irradiation with a methane production rate of 14.0 µmol gcat-1 h-1 for a pure TiO2 material without any modification procedure. This enhanced photocatalytic activity can be explained in terms of surface defects of the amorphous structure, mainly OH groups that can act as electron traps for increasing the electron lifetime. The CO2 interacts directly with those traps, forming carbonate species, which favors the catalytic conversion to methane. The am-TNTA also exhibited a high stability during six reaction cycles. The photocatalytic activity, the significantly reduced time for synthesis, and high stability for continuous CH4 production make this nanomaterial a potential candidate for a sustainable CO2 reduction process and can be employed for other energy applications.


Asunto(s)
Dióxido de Carbono , Nanotubos , Metano , Titanio
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA