Influence of urban forest on traffic air pollution and children respiratory health.

This study aimed to assess the air quality, the prevalence of child respiratory morbidity, and the association between them, in urban areas where concentrations of pollutants are expected to be below national limits. The monitoring of PM10, NO2 and O3 was performed in five schools, during 9 months. Information about respiratory diseases and associated symptoms were collected from each student using a questionnaire based on the International Study of Asthma and Allergies in Childhood. The PM10 and NO2 concentrations were higher at points closer to roads and avenues with intense vehicle flow and lower at the point closer to a park, with dense vegetation. All sampling points exceeded the annual limit established by WHO for PM10. Some maximum PM10 concentrations recorded close to the road was six times higher than the international limit. In total, 340 answered questionnaires were collected (68% response rate). Respiratory symptoms such as wheezing, sneezing, running nose, tearing, and itchy eyes had positive and strong correlation to the primary pollutants (0.70 to 0.87), but the frequency of some symptoms was lower close to the urban forest. Therefore, our results confirm the importance of creating and maintaining green areas in urban space, considering all ecosystem services provided by them, especially the improvement of air quality. In addition, a continuous program to monitor and control atmospheric pollution is required in mid-sized counties located nearby important roads, with growing fleets of vehicles.

Treatment of real dairy wastewater by electrolysis and photo-assisted electrolysis in presence of chlorides.

The efficiency of electrolysis (EC/Cl2) and photo-assisted electrolysis (EC/UV/Cl2) methods, in the presence of chloride, for the abatement of real dairy waste from a producer in the Triangulo Mineiro region of Brazil, was evaluated. A complete 23 factorial design was performed for the variables time, pH and current. After determining the ideal pH, a Central Compound Design (CCD) was performed, where the applied current (533.42 mA) and treatment time (60.45 minutes) were maximized. The effluent was subsequently submitted to prolonged EC/Cl2 and EC/UV/Cl2 treatment in order to evaluate the behaviour of specific environmental parameters over time. The EC/UV/Cl2 method was more efficient than simple EC/Cl2 treatment. The EC/UV/Cl2 method resulted in a reduction of all environmental parameters investigated to levels within legal standards for effluent discharge. A relatively low cost of treatment is obtained with Energy per Order (EEO) values of 0.89 and 1.22 kWh m-3 order-1 for the EC/UV/Cl2 and EC/Cl2 treatments, respectively. The electrochemical production of free chlorine species followed by subsequent photolysis and production of radical species can convert a simple electrochemical process into an advanced oxidation process (AOP).

Venturi: dispositivo de cavitação hidrodinâmica para acelerar a síntese de biodiesel / Venturi: hydrodynamic cavitation device to accelerate biodiesel synthesis

RESUMO O objetivo deste trabalho foi avaliar o potencial do Venturi para a síntese de biodiesel a partir de óleo comestível residual em rota metílica. Para tanto, foi construído em escala de laboratório um aparato experimental constituído de um tanque de 5,2 L e um dispositivo Venturi projetado para produzir o fenômeno de cavitação. A produção de biodiesel foi avaliada em três diferentes pressões de entrada do Venturi: 4,4; 2,9; e 1,4 bar. Os teores de ésteres metílicos foram determinados por cromatografia gasosa. O tempo de síntese de 5,2 L de biodiesel, com o Venturi, foi de 23,2 segundos (ou 4,5 segundos por litro de biodiesel produzido), o que equivale a um único ciclo de passagem pelo sistema a pressão máxima (4,4 bar). Nessa condição, o rendimento dos teores de ésteres foi superior a 98%. Não há na literatura outro caso de síntese tão rápida como a encontrada neste trabalho. A caracterização do biodiesel mostrou que os parâmetros viscosidade cinemática, índice de acidez, ponto de entupimento a frio e massa específica estão dentro dos limites estabelecidos pela Agência Nacional de Petróleo. A comparação com outros estudos da literatura mostrou que o Venturi é superior às placas de orifício na síntese de biodiesel.

Abstract The objective of this work was to evaluate the potential of Venturi in the synthesis of biodiesel from residual edible oil in a methyl route. For this purpose, an experimental apparatus consisting of a 5.2 L tank and a Venturi device designed to produce the cavitation phenomenon was constructed in laboratory scale. Biodiesel production was evaluated at three different Venturi inlet pressures: 4.4; 2.9; and 1.4 bar. Methyl esters contents were determined by gas chromatography. Biodiesel synthesis time with the Venturi device was 23.2 seconds (or 4.5 seconds per liter of biodiesel produced), which is equivalent to a single cycle of the system at maximum pressure (4.4 bar). In this condition, the yield of the ester contents was greater than 98%. There is no other case of synthesis as fast as that found in this work. The biodiesel characterization showed that the parameters kinematic viscosity, acidity index, cold clogging point, and specific mass are within the limits established by National Agency of Petroleum Natural Gas and Biofuels (Agência Nacional de Petróleo). The use of Venturi, as a cavitation device, was shown to be more efficient in biodiesel synthesis than other devices, such as orifice plates.

Molecular modeling study on the possible polymers formed during the electropolymerization of 3-hydroxyphenylacetic acid.

The compound 3-hydroxyphenylacetic acid (3-HPA) has been used as a monomer in the synthesis of polymeric films by electropolymerization; these films serve as supports for the immobilization of biomolecules in electrochemical biosensors. To assist in the elucidation of the mechanism of 3-HPA electropolymerization, a systematic quantum mechanical study was conducted. In addition to the monomer, all possible intermediates and the probable oligomers formed during the electropolymerization were investigated using a density functional theory (DFT) method combined with a previous conformational analysis performed with the aid of the RM1 semi-empirical method or a Monte Carlo conformational analysis with the force field OPLS-2005. From the data analysis combined with the experimental results, a mechanism was proposed for the main route of formation of the polymeric films. The mechanism involves the formation of polyethers from the coupling of phenoxide radicals and radicals based on the aromatic ring.