RESUMEN
OBJECTIVES: Assessment of myocardial strain by feature tracking magnetic resonance imaging (FT-MRI) in human fetuses with and without congenital heart disease (CHD) using cardiac Doppler ultrasound (DUS) gating. METHODS: A total of 43 human fetuses (gestational age 28-41 weeks) underwent dynamic cardiac MRI at 3 T. Cine balanced steady-state free-precession imaging was performed using fetal cardiac DUS gating. FT-MRI was analyzed using dedicated post-processing software. Endo- and epicardial contours were manually delineated from fetal cardiac 4-chamber views, followed by automated propagation to calculate global longitudinal strain (GLS) of the left (LV) and right ventricle (RV), LV radial strain, and LV strain rate. RESULTS: Strain assessment was successful in 38/43 fetuses (88%); 23 of them had postnatally confirmed diagnosis of CHD (e.g., coarctation, transposition of great arteries) and 15 were heart healthy. Five fetuses were excluded due to reduced image quality. In fetuses with CHD compared to healthy controls, median LV GLS (- 13.2% vs. - 18.9%; p < 0.007), RV GLS (- 7.9% vs. - 16.2%; p < 0.006), and LV strain rate (1.4 s-1 vs. 1.6 s-1; p < 0.003) were significantly higher (i.e., less negative). LV radial strain was without a statistically significant difference (20.7% vs. 22.6%; p = 0.1). Bivariate discriminant analysis for LV GLS and RV GLS revealed a sensitivity of 67% and specificity of 93% to differentiate between fetuses with CHD and healthy fetuses. CONCLUSION: Myocardial strain was successfully assessed in the human fetus, performing dynamic fetal cardiac MRI with DUS gating. Our study indicates that strain parameters may allow for differentiation between fetuses with and without CHD. CLINICAL RELEVANCE STATEMENT: Myocardial strain analysis by cardiac MRI with Doppler ultrasound gating and feature tracking may provide a new diagnostic approach for evaluation of fetal cardiac function in congenital heart disease. KEY POINTS: ⢠MRI myocardial strain analysis has not been performed in human fetuses so far. ⢠Myocardial strain was assessed in human fetuses using cardiac MRI with Doppler ultrasound gating. ⢠MRI myocardial strain may provide a new diagnostic approach to evaluate fetal cardiac function.
Asunto(s)
Corazón Fetal , Cardiopatías Congénitas , Humanos , Femenino , Embarazo , Cardiopatías Congénitas/diagnóstico por imagen , Corazón Fetal/diagnóstico por imagen , Imagen por Resonancia Cinemagnética/métodos , Imagen por Resonancia Magnética/métodos , Técnicas de Imagen Sincronizada Cardíacas/métodosRESUMEN
Key strategies in cluster synthesis include the use of modulating agents (e.g., coordinating additives). We studied the influence of various phosphines exhibiting different steric and electronic properties on the reduction of the Au(I) precursor to Au(0) clusters. We report a synthesis of the bimetallic clusters [Au6(AlCp*)6] = [Au6Al6](Cp*)6 (1) and [HAu7(AlCp*)6] = [HAu7Al6](Cp*)6 (2) (Cp* = pentamethylcyclopentadiene) using Au(I) precursors and AlCp*. The cluster [Au2(AlCp*)5] = [Au2Al5](Cp*)5 (3) was isolated and identified as an intermediate species in the reactions to 1 and 2. The processes of cluster growth and degradation were investigated by in situ 1H NMR and LIFDI-MS techniques. The structures of 1 and 2 were established by DFT geometry optimization. These octahedral clusters can both be described as closed-shell 18-electron superatoms.
RESUMEN
Porphyrin-based metal-organic frameworks (MOFs) are attractive materials for photo- and thermally activated catalysis due to their unique structural features related to the porphyrin moiety, guest-accessible porosity, and high chemical tunability. In this study, we report the synthetic incorporation of nonplanar ß-ethyl-functionalized porphyrin linkers into the framework structure of PCN-222, obtaining a solid-solution series of materials with different modified linker contents. Comprehensive analysis by a combination of characterization techniques, such as NMR, UV-vis and IR spectroscopy, powder X-ray diffraction, and N2 sorption analysis, allows for the confirmation of linker incorporation. A detailed structural analysis of intrinsic material properties, such as the thermal response of the different materials, underlines the complexity of synthesizing and understanding such materials. This study presents a blueprint for synthesizing and analyzing porphyrin-based mixed-linker MOF systems and highlights the hurdles of characterizing such materials.
RESUMEN
Three new coordination polymers (CPs) constructed from the linker 1,4-di(dithiocarboxylate) (BDDTC2-)âthe sulfur-analog of 1,4-benzenedicarboxylate (BDC2-)âtogether with Mn-, Zn-, and Fe-based inorganic SBUs are reported with description of their structural and electronic properties. Single-crystal X-ray diffraction revealed structural diversity ranging from one-dimensional chains in [Mn(BDDTC)(DMF)2] (1) to two-dimensional (2D) honeycomb sheets observed for [Zn2(BDDTC)3][Zn(DMF)5(H2O)] (2). Gas adsorption experiments confirmed a 3D porous structure for the mixed-valent material [Fe2(BDDTC)2(OH)] (3). 3 contains a 1:1 ratio of Fe2+/3+ ions, as evidenced by 57Fe Mössbauer, X-band EPR, and X-ray absorption spectroscopy. Its empirical formula was established by elemental analysis, thermal gravimetric analysis, infrared vibrational spectroscopy, and X-ray absorption spectroscopy in lieu of elusive single-crystal X-ray diffraction data. In contrast to the Mn- and Zn-based compounds 1 and 2, the Fe2+/3+ CP 3 showed remarkably high electrical conductivity of 5 × 10-3 S cm-1 (according to van der Pauw measurements), which is within the range of semiconducting materials. Overall, our study confirms that sulfur derivatives of typical carboxylate linkers (e.g., BDC) are suitable for the construction of electrically conducting CPs, due to acceptedly higher covalency in metal-ligand bonding compared to the electrically insulating carboxylate CPs or metal-organic frameworks. At the same time, the direct comparison between insulating CPs 1 and 2 with CP 3 emphasizes that the electronic structure of the metal is likewise a crucial aspect to construct electrically conductive materials.
RESUMEN
Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure-property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".
Asunto(s)
Grafito , Estructuras Metalorgánicas , Catálisis , Conductividad Eléctrica , ElectrónicaRESUMEN
Leveraging size effects, nanoparticles of metal-organic frameworks, nanoMOFs, have recently gained traction, amplifying their scopes in electrochemical sensing. However, their synthesis, especially under eco-friendly ambient conditions remains an unmet challenge. Herein, an ambient and fast secondary building unit (SBU)-assisted synthesis (SAS) route to afford a prototypal porphyrinic MOF, Fe-MOF-525 is introduced. Albeit the benign room temperature conditions, Fe-MOF-525(SAS) nanocrystallites obtained are of ≈30 nm size, relatively smaller than the ones conventional solvothermal methods elicit. Integrating Fe-MOF-525(SAS) as a thin film on a conductive indium tin oxide (ITO) surface affords Fe-MOF-525(SAS)/ITO, an electrochemical biosensor. Synergistic confluence of modular MOF composition, analyte-specific redox metalloporphyrin sites, and crystal downsizing contribute to its benchmark voltammetric uric acid (UA) sensing. Showcasing a wide linear range of UA detection with high sensitivity and low detection limit, this SAS strategy coalesces ambient condition synthesis and nanoparticle size control, paving a green way to advanced sensors.
Asunto(s)
Técnicas Biosensibles , Nanopartículas del Metal , Estructuras Metalorgánicas , Benchmarking , Temperatura , Técnicas Electroquímicas/métodos , Estructuras Metalorgánicas/química , Nanopartículas del Metal/química , Técnicas Biosensibles/métodosRESUMEN
Herein, we present a convenient synthesis for symmetrical and mixed substituted tris(acyl)phosphines (TAPs) starting from red phosphorus. All TAPs exhibit a phosphaalkene-acylphosphine equilibrium, which was investigated in detail by variable-temperature (VT) NMR spectroscopy supported by density-functional theory (DFT) calculations. Depending on the substituents, two phosphaalkene derivatives and ten acylphosphine derivatives could be isolated. NMR spectroscopy and single-crystal X-ray crystallography enabled a clear structural assignment of these compounds. Oxidation of selected TAPs led to the formation of the corresponding tris(acyl)phosphine oxides (TAPOs). Furthermore, their spectroscopic properties as well as their photochemistry was investigated. Especially, the TAPO compounds were evaluated for their suitability as photoinitiators by CIDNP spectroscopy, photobleaching measurements and by storage stability tests.
RESUMEN
Invited for the cover of this issue are the groups of M. Haas, G. Gescheidt and H. Grützmacher from the Graz University of Technology and the ETH Zürich. The image depicts a phosphorus mine, where the workers are acid chlorides using their shovels and red phosphorus to provide the chemicals necessary to produce novel reagents. Read the full text of the article at 10.1002/chem.202302535.
RESUMEN
Organic solar cells have been continuously studied and developed through the last decades. A major step in their development was the introduction of fused-ring non-fullerene electron acceptors. Yet, beside their high efficiency, they suffer from complex synthesis and stability issues. Perylene-based non-fullerene acceptors, in contrast, can be prepared in only a few steps and display good photochemical and thermal stability. Herein, we introduce four monomeric perylene diimide acceptors obtained in a three-step synthesis. In these molecules, the semimetals silicon and germanium were added in the bay position, on one or both sides of the molecules, resulting in asymmetric and symmetric compounds with a red-shifted absorption compared to unsubstituted perylene diimide. Introducing two germanium atoms improved the crystallinity and charge carrier mobility in the blend with the conjugated polymer PM6. In addition, charge carrier separation is significantly influenced by the high crystallinity of this blend, as shown by transient absorption spectroscopy. As a result, the solar cells reached a power conversion efficiency of 5.38 %, which is one of the highest efficiencies of monomeric perylene diimide-based solar cells recorded to date.
RESUMEN
BACKGROUND: Patients with sickle cell disease (SCD) have a unique form of cardiomyopathy. However, left ventricular ejection fraction (LVEF) is often preserved. Monoplanar long-axis strain (LAS) can be assessed from MRI four-chamber views and may be better at detecting mild systolic dysfunction in these patients. PURPOSE: To compare LAS (monoplanar and biplanar) with LVEF as a marker of systolic dysfunction in SCD patients. STUDY TYPE: Retrospective. SUBJECTS: A total of 20 patients with genetically proven SCD (35 MRI examinations), 39 healthy controls, and 124 patients with systemic iron overload (for validation purposes). FIELD STRENGTH/SEQUENCE: 1.5 T/3 T. Cine balanced steady-state free-precession. ASSESSMENT: Rapidly assessed biplanar LAS from four- and two-chamber views was correlated with age and compared to LVEF by two operators. For validation, biplanar LAS was compared to global longitudinal strain (GLS) using MRI feature-tracking in 124 patients with systemic iron overload. STATISTICAL TESTS: Bland-Altman analysis. Wilcoxon-Mann-Whitney test and Spearman-rank correlation (correlation coefficient, rS ). Receiver-operating-characteristic (ROC) curve analysis (area under the curve, AUC). Bivariate discriminant analysis. Significance level: P < 0.01. RESULTS: There was strong correlation between biplanar LAS and GLS using feature tracking (rS = 0.73). Interoperator agreement showed nonsignificant bias for biplanar LAS (-0.02%; ±95%-agreement interval -2.2%/2.2%, P = 0.9). Biplanar LAS increased significantly with age in controls (rS = 0.70). In SCD patients, biplanar LAS was better correlated with age than monoplanar LAS (r2 = 0.53, standard error of estimate, SEE = 1.4% vs. r2 = 0.37;SEE = 2.0%). ROC analysis of LVEF, biplanar LAS, and age-adjusted Z-scores Z (LAS(age)) showed AUCs of 0.69, 0.75, and 0.86 for differentiation between SCD patients and controls. Bivariate discriminant analysis of biplanar Z (LAS(age)) and LVEF revealed a sensitivity of 63% and a specificity of 95%. DATA CONCLUSION: Rapidly assessed biplanar LAS demonstrated high diagnostic accuracy and was an indicator of mild systolic dysfunction in patients with SCD. Biplanar LAS provided more precise measurements than monoplanar, and normalization to age increased diagnostic accuracy. EVIDENCE LEVEL: 3. TECHNICAL EFFICACY: Stage 2.
Asunto(s)
Cardiomiopatías , Sobrecarga de Hierro , Disfunción Ventricular Izquierda , Humanos , Volumen Sistólico , Función Ventricular Izquierda , Estudios Retrospectivos , Imagen por Resonancia Magnética , Sobrecarga de Hierro/diagnóstico por imagen , Disfunción Ventricular Izquierda/diagnóstico por imagen , Disfunción Ventricular Izquierda/etiologíaRESUMEN
The reaction of 2,4-tBu2-6-(PPh2)PhOH (HOArP) with silver(I) triflate in a 3:1 molar ratio gave the mononuclear coinage metal complex (HOArP-κP)3AgIOTf (1). Treatment of HOArP with LnIII[N(SiMe3)2]3 (Ln = La, Sm, Y, Yb) in a 3:1 molar ratio yielded the mononuclear rare-earth metal complexes LnIII(OArP-κ2O,P)3 (2-Ln). The heterobimetallic rare-earth metal-silver complexes LnIII(OTf)(µ-OArP-1κ1O,2κ1P)3AgI (3-Ln) were prepared from monometallic precursors by reactions of equimolar amounts of 1 with LnIII[N(SiMe3)2]3 or 2-Ln with silver(I) triflate, respectively. The compounds were characterized by NMR, ultraviolet-visible (UV-vis), and infrared (IR) spectroscopy, single-crystal X-ray diffraction, elemental analysis, and the effective magnetic moments of the paramagnetic complexes were determined via the Evans NMR method. Computational studies were conducted on 3-La and 3-Y.
RESUMEN
Late dinuclear transition-metal (especially group 10 and 11) homoleptic carbonyl complexes are elusive species and have so far not been isolated. A typical example is the 30-electron species [Ni2(CO)5], the structure and bonding of which is still debated. We show that, by using the AlCp* ligand (isolobal to CO), it is possible to isolate and fully characterize [Ni2(AlCp*)5] (1), which inspired us to revisit by DFT calculations, the bonding situation within [Ni2L5] (L = CO, AlCp*) and other isoelectronic species. The short Ni-Ni X-ray distance in 1 (2.270 Å) should not be attributed to the existence of a typical localized triple-bond between the metals, but rather to a strong through-bond interaction involving the three bridging ligands via their donating lone pairs and accepting π* orbitals. In contrast, in the isostructural 32-electron [Au2(AlCp*)5] (2) cluster an orbital with M-M antibonding and Al...Al bonding character is occupied, which is in accordance with the particularly long Au-Au distance (3.856 Å) and rather short Al...Al contacts between the bridging ligands (2.843 Å). This work shows that, unlike late transition-metal [M2(CO)x] species, stable [M2(AlCp*)x] complexes can be isolated, owing to the subtle differences between CO and AlCp*. We propose a similar approach for rationalizing the bonding in the emblematic 34 electron species [Fe2(CO)9].
RESUMEN
The aim of this study was the preparation of different amorphous silicon-carbon hybrid thin-layer materials according to the liquid phase deposition (LPD) process using single-source precursors. In our study, 2-methyl-2-silyltrisilane (methylisotetrasilane; 2), 1,1,1-trimethyl-2,2-disilyltrisilane (trimethylsilylisotetrasilane; 3), 2-phenyl-2-silyltrisilane (phenylisotetrasilane; 4), and 1,1,2,2,4,4,5,5-octamethyl-3,3,6,6-tetrasilylcyclohexasilane (cyclohexasilane; 5) were utilized as precursor materials and compared with the parent compound 2,2-disilyltrisilane (neopentasilane; 1). Compounds 2-5 were successfully oligomerized at λ = 365 nm with catalytic amounts of the neopentasilane oligomer (NPO). These oligomeric mixtures (NPO and 6-9) were used for the preparation of thin-layer materials. Optimum solution and spin coating conditions were investigated, and amorphous silicon-carbon films were obtained. All thin-layer materials were characterized via UV/vis spectroscopy, light microscopy, spectroscopic ellipsometry, XPS, SEM, and SEM/EDX. Our results show that the carbon content and especially the bandgap can be easily tuned using these single-source precursors via LPD.
RESUMEN
A new class of compounds inhibiting de-O-glycosylation of proteins has been identified. Highly substituted diaminocyclopentanes are impressively selective reversible non-transition state O-ß-N-acetyl-d-glucosaminidase (O-GlcNAcase) inhibitors. The ease of preparative access and remarkable biological activities provide highly viable leads for the development of anti-tau-phosphorylation agents with a view to eventually ameliorating Alzheimer's disease.
Asunto(s)
Enfermedad de Alzheimer , beta-N-Acetilhexosaminidasas , Humanos , Hexosaminidasas , GlicosilaciónRESUMEN
Nanosized metal aggregates (MAs), including metal nanoparticles (NPs) and nanoclusters (NCs), are often the active species in numerous applications. In order to maintain the active form of MAs in "use", they need to be anchored and stabilised, preventing agglomeration. In this context, metal-organic frameworks (MOFs), which exhibit a unique combination of properties, are of particular interest as a tunable and porous matrix to host MAs. A high degree of control in the synthesis towards atom-efficient and application-oriented MA@MOF composites is required to derive specific structure-property relationships and in turn to enable design of functions on the molecular level. Due to the versatility of MA@MOF (derived) materials, their applications are not limited to the obvious field of catalysis, but increasingly include 'out of the box' applications, for example medical diagnostics and theranostics, as well as specialised (bio-)sensoring techniques. This review focuses on recent advances in the controlled synthesis of MA@MOF materials en route to atom-precise MAs. The main synthetic strategies, namely 'ship-in-bottle', 'bottle-around-ship', and approaches to achieve novel hierarchical MA@MOF structures are highlighted and discussed while identifying their potential as well as their limitations. Hereby, an overview of standard characterisation methods that enable a systematic analysis procedure and state-of-art techniques that localise MA within MOF cavities are provided. While the perspectives of MA@MOF materials in general have been reviewed various times in the recent past, few atom-precise MAs inside MOFs have been reported so far, opening opportunities for future investigation.
Asunto(s)
Estructuras Metalorgánicas , Estructuras Metalorgánicas/química , Catálisis , Porosidad , MetalesRESUMEN
While there is a tremendous amount of scientific research on metal organic frameworks (MOFs) for gas storage/separation, catalysis and energy storage, the development and application of biocompatible MOFs still poses major challenges. In general, they can be synthesised from various biocompatible linkers and metal ions but particularly cyclodextrins (CDs) as cyclic oligosaccharides are an astute choice for the former. Although the field of CD-MOF materials is still in the early stages and their design and fabrication comes with many hurdles, the benefits coming from CDs built in a porous framework are exciting. Versatile host-guest complexation abilities, high encapsulation capacity and hydrophilicity are among the valuable properties inherent to CDs and offer extended and novel applications to MOFs. In this review, we provide an overview of the state-of-the-art synthesis, design, properties and applications of these materials. Initially, a rationale for the preparation of CD-based MOFs is provided, based on the chemical and structural properties of CDs and including their advantages and disadvantages. Further on, the review exhaustively surveys CD-MOF based materials by categorising them into three sub-classes, namely (i) CD-MOFs, (ii) CD-MOF hybrids, obtained via combination with external materials, and (iii) CD-MOF-derived materials prepared under pyrolytic conditions. Subsequently, CD-based MOFs in practical applications, such as drug delivery and cancer therapy, sensors, gas storage, (enantiomer) separations, electrical devices, food industry, and agriculture, are discussed. We conclude by summarizing the state of the art in the field and highlighting some promising future developments of CD-MOFs.
Asunto(s)
Ciclodextrinas , Estructuras Metalorgánicas , Catálisis , Ciclodextrinas/química , Sistemas de Liberación de Medicamentos , Estructuras Metalorgánicas/química , PorosidadRESUMEN
Atomic-scale magnetic field sensors based on nitrogen vacancy (NV) defects in diamonds are an exciting platform for nanoscale nuclear magnetic resonance (NMR) spectroscopy. The detection of NMR signals from a few zeptoliters to single molecules or even single nuclear spins has been demonstrated using NV centers close to the diamond surface. However, fast molecular diffusion of sample molecules in and out of the nanoscale detection volumes impedes their detection and limits current experiments to solid-state or highly viscous samples. Here, we show that restricting diffusion by confinement enables nanoscale NMR spectroscopy of liquid samples. Our approach uses metal-organic frameworks (MOF) with angstrom-sized pores on a diamond chip to trap sample molecules near the NV centers. This enables the detection of NMR signals from a liquid sample, which would not be detectable without confinement. These results set the route for nanoscale liquid-phase NMR with high spectral resolution.
Asunto(s)
Estructuras Metalorgánicas , Nitrógeno/química , Espectroscopía de Resonancia Magnética/métodos , Imagen por Resonancia Magnética , Diamante/químicaRESUMEN
Three new tripod tetradentate phenolate-amines (H2L1, H2L4 and H2L9), together with seven more already related published ligands, were synthesized, and characterized. With these ligands, two new dinuclear doubly-bridged-phenoxido copper(II) complexes (3, 4), and six more complexes (1, 2, 5-8), a new trinuclear complex (9) with an alternative doubly-bridged-phenoxido and -methoxido, as well as the 1D polymer (10) were synthesized, and their molecular structures were characterized by spectroscopic methods and X-ray single crystal crystallography. The Cu(II) centers in these complexes exhibit distorted square-pyramidal arrangement in 1-4, mixed square pyramidal and square planar in 5, 6, and 9, and distorted octahedral (5+1) arrangements in 7 and 8. The temperature dependence magnetic susceptibility study over the temperature range 2-300 K revealed moderate-relatively strong antiferromagnetic coupling (AF) (|J| = 289-145 cm-1) in complexes 1-6, weak-moderate AF (|J| = 59 cm-1) in the trinuclear complex 9, but weak AF interactions (|J| = 3.6 & 4.6 cm-1) were obtained in 7 and 8. No correlation was found between the exchange coupling J and the geometrical structural parameters of the four-membered Cu2O2 rings.
RESUMEN
The advances made in the field of stimuli-responsive catalysis during the last five years with a focus on the novel recently-emerged directions and applications have been surveyed. Metal-free catalysts and organometallic complexes, as well as biomimetic systems and extended structures, which display switchable catalytic activity for a variety of organic transformations, are discussed. Light-activated systems comprised of photochromic molecules capable of modulating reaction rate, yield, or enantioselectivity based on geometric and electronic changes associated with photoisomerization are the focus of the detailed discussion. Alternative stimuli, including pH and temperature, which could be applied either alone or in combination with light, are also addressed. Recent advances clearly demonstrate that the capability to finely tune catalyst behavior via an external stimulus is a powerful tool that could alter the landscape of sustainable chemistry.
RESUMEN
The bimetallic, decanuclear Ni3 Ga7 -cluster of the formula [Ni3 (GaTMP)3 (µ2 -GaTMP)3 (µ3 -GaTMP)] (1, TMP=2,2,6,6-tetramethylpiperidinyl) reacts reversibly with dihydrogen under the formation of a series of (poly-)hydride clusters 2. Low-temperature 2D NMR experiments at -80 °C show that 2 consist of a mixture of a di- (2Di ), tetra- (2Tetra ) and hexahydride species (2Hexa ). The structures of 2Di and 2Tetra are assessed by a combination of 2D NMR spectroscopy and DFT calculations. The cooperation of both metals is essential for the high hydrogen uptake of the cluster. Polyhydrides 2 are catalytically active in the semihydrogenation of 4-octyne to 4-octene with good selectivity. The example is the first of its kind and conceptually relates properties of molecular, atom-precise transition metal/main group metal clusters to the respective solid-state phase in catalysis.