Patient and Clinical Evaluation of Traditional Metal and Polyamide Removable Partial Dentures in an Elderly Cohort.

PURPOSE: To evaluate several clinical and functional parameters by administration of specific questionnaires to an elderly patient's cohort wearing three different types of removable partial denture (RPD): VALPLAST-RPD (Polyamide VALPLAST), CoCr-RPD (cobalt-chromium alloy), and PMMA-RPD (heat polymerized polymethyl methacrylate). MATERIALS AND METHODS: One hundred twenty patients (mean age 73 years) were included in this study. All patients were treated with a removable partial denture for the maxillary arch. After 1 year of use, patients and clinicians were asked to compile specific questionnaire on patient satisfaction, including aesthetic, functional, and clinical outcomes. It was also evaluated whether the localization of the missing teeth according to Kennedy classification may affect these parameters. Categorical data obtained from the questionnaires were analyzed by chi-squared test. RESULTS: VALPLAST-RPD was the most satisfactory aesthetically. Nevertheless, patients of VALPLAST-RPD group reported increased difficulty in cleaning the prosthesis, roughness perceived by the tongue, and increased retention loss (p < 0.001). Patients with PMMA-RPD claimed a higher level of encumbrance (p < 0.001) and increased speech difficulties (p = 0.002). Clinically, patients of VALPLAST-RPD and PMMA-RPD groups displayed redness of the mucosa area around abutment teeth (p < 0.001). Patients of VALPLAST-RPD group had four cases of artificial teeth loss and two cases of discoloration. The position of missing teeth did not significantly influence any parameter. CONCLUSIONS: Each RPD material utilized may present advantages and disadvantages in an elderly population. VALPLAST-RPD may be recommended to older patients with non-extensive edentulous areas supported by anterior and posterior teeth, and not subjected to strong chewing loads. The main advantages are aesthetic satisfaction and easiness to insert and remove it.

Periodontal health and compliance: A comparison between Essix and Hawley retainers.

INTRODUCTION: Many studies on removable retainers have focused on retention efficacy and characteristics. However, studies on plaque accumulation, periodontal health, breakages, and patient compliance are still lacking. Thus, in this study, we aimed at evaluating these parameters in 2 groups of young patients wearing Essix or Hawley retainers for a 6-month period. METHODS: Seventy subjects were included. Periodontal health was investigated by measuring the plaque, gingival, calculus, and bleeding on probing indexes. Evaluations were performed at 1, 3, and 6 months of wearing. Accumulation of plaque on the retainers was also evaluated. Furthermore, compliance on wearing retainers and breakage data were collected by specific questionnaires. RESULTS: Subjects wearing Essix retainers had significantly higher levels of plaque, gingival, and calculus indexes and increased percentages of bleeding sites, compared with subjects wearing Hawley retainers. The Essix group also had increased accumulations of plaque and calculus on the retainers. Nonetheless, subjects of the Essix group had better overall experiences, self-perceptions, and comfort compared with those of the Hawley group. Essix retainers had higher incidences of little and serious breakages compared with Hawley retainers. CONCLUSIONS: Our results suggest that Essix retainers are well accepted by patients for their esthetic and oral comfort characteristics. However, Essix retainers may cause greater accumulations of plaque on both teeth and retainers, presumably because of inhibition of the cleaning effect of saliva caused by the thermoplastic material or the reduced opportunity for good hygiene on the retainer.

Rapid Maxillary Expansion in Obstructive Sleep Apnea in Young Patients: Cardio-Respiratory Monitoring.

OBJECTIVE(S): Obstructive sleep apnea syndrome (OSAS) is a respiratory disorder which affects from 1 to 3 % of people during development. OSAS treatment may be pharmacological, surgical or based on application of intraoral devices to increase nasal respiratory spaces. The purpose of this study was to determine the efficacy of the Rapid Maxillary Expander in OSAS young patients by measuring cardio-respiratory monitoring parameters (AHI, the average value of complete and incomplete obstructed respiration per hour of sleep, and SAO2, the percentage of oxygen saturation). STUDY DESIGN: The study was conducted on 11 OSAS young subjects (mean age 6.9±1.04 years), all treated with rapid maxillary expansion (RME). Cardio-respiratory monitoring (8-channel Polymesam) was performed at the beginning (diagnostic, T0) and after 12 months of treatment. RESULTS: The mean values of cardio-respiratory parameters at TO were: AHI=6.09±3.47; SAO2=93.09%±1.60. After 12 months of treatment, the mean values of the same polysomnographic parameters were: AHI=2.36 ± 2.24;SAO2=96.81% ±1.60. These changes were associated with an improvement in clinical symptoms, such as reduction of snoring and sleep apnea. CONCLUSION(S): This study confirms the therapeutic efficacy of RME in OSAS young patients. This orthopedic-orthodontic treatment may represent a good option in young patients affected by this syndrome.

Cobalt-chromium alloys in dentistry: An evaluation of metal ion release.

STATEMENT OF PROBLEM: Metal ions released into the oral cavity from dental prosthesis alloys may damage the cellular metabolism or proliferation and cause hypersensitivity or allergies. The oral cavity environment is particularly prone to corrosion due to saliva, microorganisms, and pH variations. PURPOSE: The purpose of this in vitro study was to evaluate the ion release of chromium, cobalt, and iron from the Co-Cr alloys used for traditionally cast and computer-aided design/computer-aided manufacturing dental devices after interaction with oral bacteria and different pH conditions. MATERIAL AND METHODS: All specimens were prepared from currently available alloys, polished, and immersed in 3 different pH media (artificial saliva [pH 2.3] and 6.5% and 0.9% saline solution [pH 7.1]). Specimens were also incubated in the presence of the bacterium Eikenella corrodens. Solutions were analyzed with an atomic absorption spectrometer after 15 and 30 days in the chemical corrosion test and 30 days in the biocorrosion test to detect ions released in different solutions. An ANOVA test was used to evaluate statistically significant differences among the percentages of metal corrosion ion release values. RESULTS: The greatest amount of element release was seen after 30 days: 4.964 ppm of casting alloy, 2.642 ppm of milling alloy, and 2.351 ppm of laser metal sintering. CONCLUSIONS: With the exception of casting alloy under acidic conditions, no significant differences were found, even after exposure to bacteria.

Use of psychotropic drugs and associated dental diseases.

Patients with problems related to central nervous system dysfunctions are often treated with psychotropic drugs. These include antipsychotics, antidepressants, mood stabilizers, anticonvulsants, and drugs blocking specific receptors in the brain such as anticholinergics or beta-blockers. However, these medications have serious side effects affecting the oral health. In addition, many dental patients make use of psychoactive drugs, such as amphetamine, ecstasy, and cocaine. This article aims to review data on the psychotropic drugs being used in the last 30 years, their pharmacological profile, with special attention to the side effects related to the oral health. Oral diseases such as bruxism, orofacial dystonia, oromandibular dyskinesia, and rabbit syndrome are related to extrapyramidal effects of antipsychotic drugs because of their antagonist activity on the dopaminergic receptors. Drugs with anticholinergic and/or antiadrenergic effects such as tricyclic antidepressants may cause dry mouth and related complications such as candidiasis and other oral infections. Among mood stabilizers, lithium treatment induces a wide range of side effects on oral system including dry mouth, sialorrhea, infections, and ulceration of the oral cavity. Psychostimulants may instead provoke xerotomia, gingival enlargements, bruxism, dental erosion, mucosal ulceration, and oral/nasal lesions. This literature review supports the idea that the higher prevalence of oral diseases among patients with mental disorders may be attributed to the side effects of their medications mediated by complex interactions between different targeted receptors. Thus, dentists must be aware of the possible risks of these medications in order to take appropriate precautions in treating these patients.

Bisphosphonate therapy and osteonecrosis of the jaw complicated with a temporal abscess in an elderly woman with rheumatoid arthritis: a case report.

Bisphosphonate-related osteonecrosis of the jaw (BRONJ) is an adverse drug reaction described as the progressive destruction and death of bone tissue of the mandible or maxilla, in the course of bisphosphonate therapy. Orally administered bisphosphonates, widely used for the treatment of osteoporosis, are rarely associated with BRONJ. Instead, the risk greatly increases whether the patient is concomitantly taking steroid and/or immunosuppressant agents. The aims of this paper are to briefly discuss the evidence of the associations between bisphosphonate therapy and BRONJ, and the effects of co-occurring factors such as the presence of rheumatoid arthritis, dental surgery, and concomitant corticosteroid therapy. In particular, we present the case of an elderly woman with BRONJ suffering from rheumatoid arthritis, with a recent dental extraction and with a very unusual complication: a temporal abscess, who was successfully treated.

High temperature-treated bovine porous hydroxyapatite in sinus augmentation procedures: a case report.

Among the graft materials that can be used clinically, xenografts are the most common. Xenografts are of bovine, porcine, or equine origin and require the complete removal of proteins to avoid immunologic problems and the risk of transmission of prions, viruses, etc. Protein destruction can be achieved by a chemical procedure using organic solvents and heat treatment. After this process, a carbonated hydroxyapatite similar to human bone remains. The aim of this case report is to investigate the bone formation in a sinus augmentation procedure using a high temperature-treated bovine porous hydroxyapatite. A 58-year-old woman underwent bilateral sinus augmentation using this biomaterial. After 9 months, during stage-two surgery, two core biopsy specimens were retrieved and treated to obtain thin ground undecalcified sections. Microscopically, newly formed bone was present at the interface with most particles. The major portion of the particles appeared to be completely lined and surrounded by bone. No obvious signs of resorption were present on the biomaterial surface. No gaps or connective tissue were present at the bone-biomaterial interface. No inflammatory infiltrate or fibrous encapsulation of the particles was present. Histomorphometry showed that the percentages of newly formed bone, residual grafted particles, and marrow spaces were 25.1% ± 2.3%, 37.3% ± 1.1%, and 38.5% ± 3.1%, respectively. The excellent properties demonstrated by Endobon are probably a result of its particular hydroxyapatite porous microstructure with a high percentage of interconnected micropores that promote the ingrowth of osteogenic cells and vessels, making graft integration easier and faster.

Microhardness and morphological changes induced by Nd:Yag laser on dental enamel: an in vitro study.

The aim of this work was a scanning electron microscopy (SEM) evaluation of the hardness and morphological changes of enamel irradiated by neodymium: yttrium aluminium garnet (Nd:YAG) laser with different energy levels. Twenty-eight human teeth samples were divided into 4 groups: control, where enamel surface was not lased, and 3 test treated with 3 different levels of energy power 0.6, 1.2 and 2.4 Watt, respectively. In each group, 5 samples underwent Vickers micro-hardness test and 2 samples were processed for SEM. No significant differences between treated and non treated samples were found by micro-hardness test. However, by SEM, test samples showed a rougher enamel surface than control. Specifically, the 0.6 Watt treated samples showed vertical scratches and glass-like areas, while in the other 2 groups enamel surface was covered by craters and cracks. These findings suggest that enamel should be lased at a low energy level to preserve its integrity and reduce demineralization, and thus for dental caries prevention purposes; while high energy level creates a retentive surface suitable for sealant or composite anchorage.