Standing on shoulder of giants: the incredible legacy of the Judet family in orthopaedic surgery.

In orthopaedic surgery, as well as other areas in medicine, it is common for a surgical technique to carry the original authors' name describing the procedure. The Judet family represents a unique history, since several orthopaedic procedures are known as "Judet's technique". The aim of this historic review is to outline the genealogy of the orthopaedic arm of the Judet family, while crediting each surgical procedure to the specific family member that described the technique.

Open reduction and internal fixation of Ideberg type IA glenoid fractures: Tricks, pearls, and potential pitfalls based on a retrospective cohort of 33 patients focusing on the rehabilitation protocol.

INTRODUCTION: The standard treatment of anterior glenaoid fractures carrying > 20% of the glenoid fossa is open reduction and internal fixation (ORIF). In the herein study, we report our outcomes in a retrospective cohort of anterior and anteroinferior glenoid rim fractures using an accelerated postoperative rehabilitation protocol. A secondary aim is to describe the surgical steps for ORIF of anterior and anteroinferior glenoid rim fractures using the anterior axillary approach, describing the tricks, pearls, and pitfalls of this surgical technique. METHODS: A retrospective cohort of skeletally mature patients treated for an anterior glenoid rim fracture carrying > 20% of the glenoid fossa during a 10-year period were operated on using a vertical axillary incision, osteosynthesis with 2.0-mm cortical screws, and labral repair with small diameter metallic anchors and non-absorbable sutures. Rehabilitation began on the first postoperative day, including passive external rotation exercises and active-assisted flexion, adduction, and abduction exercises as tolerated. The exercises are performed with the patient sitting or lying down. Phase 1 is continued for 6-10 weeks until the patient regains painless, normal, or near-normal ROM. Usually by 10 weeks, the fracture and labrum are healed, so phase 2 rehabilitation begins with strengthening and ROM exercises. Radiologic and clinical outcomes, including active range of motion (ROM), glenohumeral stability, and visual analogue scale (VAS) were measured. RESULTS: About 33 patients (35 fractures) had complete medical records and pre- and post-operative imaging exams available for further analysis regarding the surgical protocol, with a mean of 4.8 years. The mean DASH questionnaire was 3.75 ± 9.0 and the mean CM score was 62.5 ± 0.1. Active flexion and internal rotation were recovered in all patients, while external rotation presented an average loss of 8° (p = 0.12) and abduction of 5° (p = 0.33). The mean VAS was 1.1 ± 0.8. No patient reported major or disabling symptoms, or great difficulty or inability to perform daily or recreational activities. No patient presented residual instability of the glenohumeral joint. CONCLUSION: In this retrospective cohort, ORIF using a vertical axillary incision, osteosynthesis with 2.0-mm screws, and labral repair with small diameter metallic anchors and non-absorbable sutures was a safe approach, with a minimal risk of complications and residual instability. The accelerated postoperative rehabilitation protocol, allowing immediate passive external rotation of the operated shoulder, resulted in a non-significant loss of ROM compared to the contralateral side. Therefore, we recommend this management strategy for anterior glenoid rim fractures in patients with unstable shoulder joint after traumatic glenohumeral dislocation. LEVEL OF EVIDENCE IV: Therapeutic Study (Surgical technique and Retrospective cohort).

Biomechanical comparison of four different posterior malleolus fixation techniques: A finite element analysis.

PURPOSE: The objective of this study was to compare the biomechanical behavior of four fixation methods for posterior malleolar fracture (PMF) by finite element analysis (FEM). METHODS: Four internal fixation techniques used for fixation of PMF were assessed by FEM - a computational study: posterior one-third tubular 3.5 mm buttress plate (PP) with one screw (PP 1 screw), PP with two screws (PP 2 screws), two cannulated 3.5 mm lag screws in the antero-posterior (AP) direction (AP lag screws), and two postero-anterior (PA) cannulated 3.5 mm lag screws (PA lag screws). PMF with 30% and 50% fragment sizes were simulated through computational processing reconstructed from computed tomography (CT). The simulated loads of 700 N and 1500 N were applied to the proximal tibial end. The FEM evaluated the total and localized displacements of the PMF. For the analysis of stresses, the variables maximum principal (traction) and minimum principal (compression) were used. For the metallic implants, the equivalent von Mises stress (VMS) was used. RESULTS: PA lag screw showed the lowest values for total and localized displacement, minimum and maximum total stress, and VMS in both physiological conditions and sizes of posterior malleolus involvement. The localized displacement was statistically lower for lag screws compared to PP techniques at 700 N (p < 0.05) and 1200 N (p < 0.05). The maximum total stress was statistically lower for PA lag screws compared to PP 1 fixation with 700 N (p = 0.03) and 1200 N (p = 0.039). CONCLUSION: PA lag screws yield better results in terms of total and localized displacement, minimum and maximum total stress, and VMS in both physiological conditions and sizes of posterior malleolus involvement. These results demonstrate that PA lag screws are biomechanically the most efficient technique for the fixation of PMF.

Antinociceptive and Anti-Inflammatory Effects of Saline Extract and Lectin-Rich Fraction from Microgramma vacciniifolia Rhizome in Mice.

Previous studies have characterized a saline extract from Microgramma vacciniifolia rhizome and its lectin (MvRL)-rich fraction with low acute toxicity. In the present study, we evaluated these preparations for acute toxicity (1,000 mg/kg) and antinociceptive and anti-inflammatory activities (100-400 mg/kg for the extract and 25-50 mg/kg for the fraction). No signs of toxicity were observed. Both the extract and fraction increased the latency period for nociception in the hot plate assay, decreased writhing induced by acetic acid, and promoted analgesic effects in phases 1 and 2 of the formalin test. The antinociceptive mechanism was attributed to interactions with opioid receptors and K+ ATPase channels. The extract and fraction decreased carrageenan-induced paw edema in 46.15 % and 77.22 %, respectively, at the highest doses evaluated. Furthermore, the fraction was shown to act on the bradykinin pathway. The ability to decrease leukocyte migration after treatment was also verified in the peritonitis and air pouch models. In exudates collected from air pouches, decreased tumor necrosis factor (TNF)-α and increased interleukin (IL)-10 levels were noted. Both the extract and fraction also effectively inhibited the development of granulomatous tissue. In conclusion, the substances investigated in this study can be used for the development of novel therapeutic options for pain and inflammatory processes.

Influence of Filler Composition on the Refractive Index of Four Different Enamel Shades of Composite Resins.

AIM AND OBJECTIVE: The purpose of this study was to measure the refractive index of four commercially available enamel resin composites, using optical coherence tomography (OCT) and their relationship with the atomic composition of the composite resin fillers utilizing an energy-dispersive X-ray fluorescence spectrometer (EDX). MATERIALS AND METHODS: Four different enamel composites, namely Enamel HRi color UE3, Enamel HFO color GE3, Vit-l-escence color Pearl Frost, and Amelogen Plus color Enamel White were tested. For each composite, disks with different thicknesses were fabricated and then light-cured according to the manufacturer's instructions. The disks were then stored in deionized water under 36.5 °C for at least 7 days. Each of the samples from the four different groups was measured in five distinctive points to analyze the optical and physical length using optical coherence tomography (OCT). Elemental analysis of all four different enamel shades of the composite was done using an EDX. RESULTS: The filler contents showed interesting differences in elemental composition and concentration; however, Si seemed to be a common filler component. The HRi composite presented a distinctive composition compared to other materials and was the only composite that showed a smaller percentage of SiO2, and also was the only composite that contained compounds, such as P2O5, ZnO, CaO, La2O3, and V2O5. The optical coherence tomography analysis showed the refractive index values of all tested enamel composites. Among the four different enamel composite resins tested, the enamel HRi composite demonstrated the most ideal refractive index to mimic natural enamel. CONCLUSION: The enamel HRi composite demonstrated a distinctive filler composition and this could be the main reason behind its higher refractive index. Nonetheless, it remains unclear how much of an impact this feature has in the final esthetic outcome of anterior composite restorations, where many other optical phenomena are also important. CLINICAL SIGNIFICANCE: The clinical success of any esthetic restorative procedure depends on diagnosing the proper treatment plan and also on executing this treatment with the right materials. On direct esthetic restorations, knowing the optical properties of such materials is fundamental, as they should be able to replicate both natural enamel and dentin. How to cite this article: Beolchi RS, Mehta D, Pelissier B, et al. Influence of Filler Composition on the Refractive Index of Four Different Enamel Shades of Composite Resins. J Contemp Dent Pract 2021;22(5):557-561.

New fixation method for Pauwels type III femoral neck fracture: a finite element analysis of sliding hip screw, L-shaped, and L-shaped with medial plate.

OBJECTIVE: In this study, we aimed to evaluate the biomechanical behavior of three fixations for Pauwels type III fractures (sliding hip screw (SHS), L-shaped, and L-shaped with medial plate), by finite element analysis (FEM). METHODS: Three internal fixators were developed to treat Pauwels type III fracture by finite elements: SHS; L-shaped; and L-shaped with medial plate. Under the same conditions, localized and total vertical fracture displacement, maximum and minimum principal and von Mises stresses were evaluated. RESULTS: The localized and total vertical displacement evaluated for the SHS, L-shaped, and L-shaped with medial plate were 0.15 mm, 0.17 mm, and 0.07 mm (localized), and 4.52 mm, 6.97 mm, and 6.83 mm (total), respectively. The maximum values obtained in the upper region of the femoral neck for the internal fixations were 1.43 MPa, 1.29 MPa, and 1.24 MPa, and the minimum values obtained in the lower region of the femoral neck were - 0.73 MPa, - 1.09 MPa, and - 1.03 MPa, respectively. The maximum Von Mises peak stress values were 6.35 MPa, 10.7 MPa, and 16.2 MPa for the fixation models using the SHS, L-shaped, and L-shaped with medial plate, respectively. CONCLUSION: The present FEM analysis showed that SHS yields better results in terms of total vertical displacements, maximum distribution, and Von Mises peak stresses reduction. On the other hand, the L-shaped construction plus a medial plate decreases localized vertical displacements and maximum principal distribution when compared to the SHS and L-shaped constructions. These results demonstrate that both constructions, SHS and L-shaped plus a medial plate, are biomechanically efficient for the fixation of Pauwels type III femoral neck fractures.

Microbial patterns in rumen are associated with gain of weight in beef cattle.

Ruminal microorganisms play a pivotal role in cattle nutrition. The discovery of the main microbes or of a microbial community responsible for enhancing the gain of weight in beef cattle might be used in therapeutic approaches to increase animal performance and cause less environmental damages. Here, we examined the differences in bacterial and fungal composition of rumen samples of Braford heifers raised in natural grassland of the Pampa Biome in Brazil. We aimed to detect microbial patterns in the rumen that could be correlated with the gain of weight. We hypothesized that microorganisms important to digestion process are increased in animals with a higher gain of weight. The gain of weight of seventeen healthy animals was monitored for 60 days. Ruminal samples were obtained and the 16S and ITS1 genes were amplified and sequenced to identify the closest microbial relatives within the microbial communities. A predictive model based on microbes responsible for the gain of weight was build and further tested using the entire dataset., The main differential abundant microbes between groups included the bacterial taxa RFN20, Prevotella, Anaeroplasma and RF16 and the fungal taxa Aureobasidium, Cryptococcus, Sarocladium, Pleosporales and Tremellales. The predictive model detected some of these taxa associated with animals with the high gain of weight group, most of them being organisms that have been correlated to the production of substances that improve the ruminal digestion process. These findings provide new insights about cattle nutrition and suggest the use of these microbes to improve beef cattle breeding.

QUANTIFICATION OF RETINAL CAPILLARY NONPERFUSION IN DIABETICS USING WIDE-FIELD OPTICAL COHERENCE TOMOGRAPHY ANGIOGRAPHY.

PURPOSE: To combine advances in high-speed, wide-field optical coherence tomography angiography (OCTA) with image processing methods for semiautomatic quantitative analysis of capillary nonperfusion in patients with diabetic retinopathy (DR). METHODS: Sixty-eight diabetic patients (73 eyes), either without retinopathy or with different degrees of retinopathy, were prospectively recruited for volumetric swept-source OCTA imaging using 12 mm × 12 mm fields centered at the fovea. A custom, semiautomatic software algorithm was used to quantify areas of capillary nonperfusion. RESULTS: The mean percentage of nonperfused area was 0.1% (95% confidence interval: 0.0-0.4) in the eyes without DR; 2.1% (95% confidence interval: 1.2-3.7) in the nonproliferative DR eyes (mild, moderate, and severe), and 8.5% (95% confidence interval: 5.0-14.3) in the proliferative DR eyes. The percentage of nonperfused area increased in a statistically significant manner from eyes without DR, to eyes with nonproliferative DR, to eyes with proliferative DR. CONCLUSION: Capillary nonperfusion area in the posterior retina increases with increasing DR severity as measured by swept-source OCTA. Quantitative analysis of retinal nonperfusion on wide-field OCTA may be useful for early detection and monitoring of disease in patients with diabetes and DR.

Optical coherence tomography and polarized light microscopy for the evaluation of artificial caries: a preliminary study.

This study was designed to investigate whether there is a correlation between the findings of optical coherence tomography (OCT) and polarized light microscopy (PLM) when these techniques are used to evaluate standard enamel white-spot lesions developed by distinct cariogenic challenges. Bovine enamel fragments (N = 168) were randomly allocated into 6 experimental groups according to the microbiologic model (Streptococcus mutans UA159, Streptococcus sobrinus ATCC 33478, or mixed S mutans and S sobrinus) and carbohydrate sources (1% sucrose or combined 1% sucrose and 1% starch). Specimens were examined by OCT and PLM every day within a period of 7 days. Five measurements of demineralization depth were recorded for each specimen, and means were calculated. Data were analyzed with analysis of variance and Tukey tests (α = 0.05), and a correlation test was performed. All cariogenic challenges created sub-superficial lesions. In both the OCT and PLM analyses, the demineralization depth reached its peak between days 6 and 7 of the cariogenic challenge, except for the group challenged with S sobrinus supplemented with combined sucrose and starch; for that group, demineralization peaked on day 5 in the OCT analysis. There was a significant correlation between OCT and PLM (P = 0.00; r = 0.842). This preliminary study suggests that OCT is a reliable, nondestructive method to measure the demineralization depth of enamel white-spot lesions, which can be useful for the laboratory and has potential for clinical studies. Using the 1% sucrose and S mutans model for 6 days is a simple and effective method to induce enamel caries-like lesions without compromising the depth and morphologic features of the obtained lesions.

Differences in bacterial composition between men's and women's restrooms and other common areas within a public building.

Humans distribute a wide range of microorganisms around building interiors, and some of these are potentially pathogenic. Recent research established that humans are the main drivers of the indoor microbiome and up to now significant literature has been produced about this topic. Here we analyzed differences in bacterial composition between men's and women's restrooms and other common areas within the same public building. Bacterial DNA samples were collected from restrooms and halls of a three-floor building from the Federal University of Pampa, RS, Brazil. The bacterial community was characterized by amplification of the V4 region of the 16S rRNA gene and sequencing. Throughout all samples, the most abundant phylum was Proteobacteria, followed by Actinobacteria, Bacteroidetes and Firmicutes. Beta diversity metrics showed that the structure of the bacterial communities were different among the areas and floors tested, however, only 6-9% of the variation in bacterial communities was explained by the area and floors sampled. A few microorganisms showed significantly differential abundance between men's and women's restrooms, but in general, the bacterial communities from both places were very similar. Finally, significant differences among the microbial community profile from different floors were reported, suggesting that the type of use and occupant demographic within the building may directly influence bacterial dispersion and establishment.

Variation on Molecular Structure, Crystallinity, and Optical Properties of Dentin Due to Nd:YAG Laser and Fluoride Aimed at Tooth Erosion Prevention.

This in vitro study evaluated the compositional, crystalline, and morphological effects promoted by Nd:YAG laser on root dentin, and verified the effects of laser and topical acidulated phosphate fluoride application (APF-gel) on dentin erosion. 180 bovine dentin slabs were randomized into 4 groups (n = 45): G1-untreated, G2-APF-gel (1.23% F-, 4 min), G3-Nd:YAG (1064 nm, 84.9 J/cm², 10 Hz), and G4-APF-gel application followed by Nd:YAG laser irradiation. The compositional, crystalline, and morphological effects promoted by treatments were investigated on five samples of each experimental group. The other samples were submitted to a 5-day, 10-day, or 15-day erosive and abrasive demineralization and remineralization cycling in order to create erosion lesions. The area and depth of lesions, as well as the optical attenuation coefficient, were assessed, and all data were statistically analysed (p < 0.05). Nd:YAG laser promoted the reduction of carbonate, the formation of tetracalcium phosphate, as well as the melting and recrystallization of the dentin surface. Laser significantly decreased the area and depth of erosion lesions and altered the optical attenuation coefficient when compared to untreated and APF-gel groups, but the association of APF-gel and laser did not promote an additional effect. Nd:YAG laser irradiation can be a promissory treatment to prevent dentin erosion and the abrasion process.

Stability of L-shaped and inverted triangle fixation assemblies in treating Pauwels type II femoral neck fracture: a comparative mechanical study.

PURPOSE: The aim of our study is to compare the mechanical resistance of two screw configurations in fixating type II Pauwels femoral neck fractures. METHODS: Fifteen synthetic models of femur bones in young adults were divided into three equal groups: intact (G1), models with fixation of a 5.0-mm failure zone created in the posterior cortex of the femoral neck using an L-shaped screw arrangement (G2, n = 5), and models with an identical failure zone fixated using an inverted triangle assembly (G3, n = 5). Model strength (axial loading) and rotational deviation of the fragments were load-tested until a 5.0-mm displacement was reached (step 1) and then until failure, here considered as 10.0 mm displacement in G2 and G3 or femoral neck fracture in G1 (step 2). RESULTS: In step 1, the mean resistance in G1 was 1593 N (standard deviation [SD] of 62 N); this value in G2 was 1261 N (SD 49 N) and in G3 was 1074 N (SD 153 N). During step 2, the value for G1 was 2247 N (SD 84 N), for G2 was 1895 N (SD 69 N), and for G3 was 1523 N (SD 280 N). G3 (the inverted triangle assembly) showed a significantly lower maximum load than the group using the L-shaped assembly (G2) and the control group (G1), which was significant using Kruskal-Wallis analysis of variance (p = 0.002). CONCLUSION: Under test conditions in synthetic bone, fixation using a L-shaped screw assembly provides greater mechanical resistance than an inverted triangle assembly.

Progression of erosive lesions after Nd:YAG laser and fluoride using optical coherence tomography.

This study aimed to use optical coherence tomography (OCT) to assess the progression of erosive lesions after irradiation with Nd:YAG laser and application of topical fluoride. One-hundred and twenty dentin samples (4 × 4 × 2 mm) obtained from bovine incisors were used. Samples were protected with acid-resistant nail varnish, with exception of a central circular area 2 mm in diameter. All samples were submitted to erosive cycles with citric acid solution 0.05 M (citric acid monohydrate-C6H8O7·H2O); M = 210.14 g/mol) pH 2.3, at room temperature, for 20 min, 2×/day, throughout 20 days. After 10 days of acid challenges, lesions became visible, and each group received a different treatment (n = 15): control (without treatment), topical application of sodium fluoride 2 % for 4 min; Nd:YAG laser with different irradiation parameters (1, 0.7, and 0.5 W); and the association of fluoride with the laser parameters. OCT readouts were performed on day 01 (before the first acid challenge-OCT1), on day 05 (OCT2), day 10 (OCT3-after treatment), day 15 (OCT4), day 17 (OCT5), and day 20 (OCT6). The OCT images generated made it possible to measure the amount of tooth tissue loss over the 20 days of erosive cycle, before and after treatments, and to monitor early dentin demineralization progression. After statistical analysis, the fluoride group was observed to be the one that showed smaller loss of tissue over time. The OCT technique is promising for diagnosing and monitoring erosive lesion damage; however, further in vitro and in vivo research is needed to improve its use.

The use of medicinal plants in venous ulcers: a systematic review with meta-analysis.

The aim of this study was to systematically review the use of medicinal plants for the treatment of varicose ulcers. The databases used in the search were: Medline/Pubmed, Scopus, Cinhal, Lilacs and Web of Science. The selection process was divided into two phases: the reading of titles and abstracts and the full reading of selected articles. The item description was compared with the checklist of the Consolidated Standards of Reporting Trials. The initial search produced 3505 articles and seven were selected for inclusion in the systematic review. Of the included studies, 7 (100%) evaluated the reduction of the ulcer area, 4 (57·14%) evaluated reepithelisation, 2 (28·57%) evaluated bacterial flora and 1 (14·28%) evaluated the oxygen pressure and percutaneous carbon dioxide. The level of evidence rating indicated that five studies (71·42%) were rated at level 2 and two (28·57%) were rated at level 3. The quality assessment was performed using the Jadad scale, which is prevalent in the literature. The quality score of the Jadad questionnaire ranges from 0 to 5; here, the studies analysed had an average of 2·5. A meta-analysis was performed on two studies that analysed the effects of Mimosa tenuiflora hydrogel in the treatment of venous ulcer and included 42 patients with a mean age of 60·5 years and a mean duration of treatment of 10·5 weeks. Heterogeneity was assessed using I2 ; we obtained a high value of 84%. We concluded that, despite the efficacy of the incorporation of Ageratina pichinchensis into the gel, the hydrogel that incorporated M. tenuiflora appeared to be a promising candidate for the management of venous ulcers.

Optical coherence tomography to evaluate the effects of oxidative hair dye on the fiber.

BACKGROUND/PURPOSE: Oxidative hair dyes can damage the hair, since these chemical procedures are involved to change the fiber structure and therefore changes in their mechanical and surface properties. Evaluate and compare the effect of the two colors of oxidative hair dye emulsions on Caucasian hair. This research analyzed the Dark brown hair untreated (I); Dark brown hair treated with light brown dye (II); Dark brown hair treated with light blond dye (III); Light blond hair untreated (IV); Light blond hair treated with light brown dye (V); Light blond hair treated with light blond dye (VI) on Caucasian hair. METHODS: The hair samples were submitted to breaking strength, color, and optical coherence tomography (OCT) analysis. RESULTS: For the breaking strength assay no presented statistically significant differences between treatments. The parameters of color and brightness can differ in some hair dye formulations, but also the hair type can respond differently. The OCT images of the sample I and IV was possible observed, clearly Medulla and Cortex, which was not observed clearly after treatment with both oxidative hair dye colors. CONCLUSION: Based on the results, the oxidative hair dyes increased alteration in color and ultrastructure of hair.

Evaluation of two quantitative analysis methods of optical coherence tomography for detection of enamel demineralization and comparison with microhardness.

BACKGROUND AND OBJECTIVE: We aimed to evaluate in the same study two quantitative methods for quantification of incipient caries in human dental enamel by using optical coherence tomography (OCT): the optical attenuation coefficient and the area under the A-scan signal, and to compare their results with those obtained from microhardness analysis. STUDY DESIGN/MATERIALS AND METHODS: One hundred and sixty samples were obtained from 40 sound human third molars, which had their crowns sectioned. Simulated caries were created by a pH cycling method. OCT measurements were performed on the samples, before and after the induced demineralization. We determined the total optical attenuation coefficient from the OCT signal in each site and evaluated the sensitivity and specificity of this approach to the detection of the demineralization. Also, the areas under the OCT curves (AUC-OCT) and those from sectional microhardness tests (AUC-MH) were compared. RESULTS: Both the analysis of the optical attenuation coefficient and the AUC-OCT were adequate to efficiently distinguish sound and demineralized samples with sensitivity of 0.93 and specificity of 0.96. The AUC-MH and the AUC-OCT data presented linear relationship and correlation of 0.99. CONCLUSION: Both methods for signal analysis from OCT allowed detection of demineralization with good performance. The AUC-OCT approach enables obtaining a linear relation with the microhardness results, for a quantitative assessment of mineral loss in human teeth.

Obtaining artificially caries-affected dentin for in vitro studies.

AIM: This study evaluated and improved a protocol for obtaining standard caries-affected dentin (CAD) by Streptococcus mutans biofilm demineralization process. MATERIALS AND METHODS: Forty-eight human molars were divided in six experimental groups, according to: period of cariogenic challenge (7, 14 or 21 days) and type of dentin (erupted or unerupted teeth). After complete cariogenic challenge sound and CAD dentin were evaluated by: visual inspection (VI), digital radiography (DR), optical coherence tomography (OCT) and laser fluorescence (LF). RESULTS: Visual inspection confirmed the formation of CAD based on tissue yellowing and loss of surface gloss. Digital radiography detected the presence of radiolucent images, suggesting caries. Three calibrated examiners viewed all images obtained by VI and DR and were able to distinguish healthy from CAD. Fisher's exact statistical test (p < 0.05) confirmed no difference between groups by VI (G1/G4: p = 0.6; G2/G5: p = 1; G3/G6: p = 1) or DR (G1/G4: p = 1; G2/G5: p = 1; G3/G6: p = 1). Both LF values and demineralization depth, as determined by OCT, were subjected to ANOVA (p < 0.05). For LF, a statistically significant difference was observed for the type of substrate (p = 0.001). For OCT, no statistically significant differences in the type of substrate (p = 0.163), length of cariogenic challenge (p = 0.512) or interaction between factors (p = 0.148) were observed. Scanning electron micrographs confirmed the presence of CAD; a more uniform demineralization surface was observed in the dentin of unerupted teeth. CONCLUSION: This protocol suggests that standard CAD can be obtained in 7 days of cariogenic challenge using unerupted teeth. Clinical significance: With the new perspective on the clinical treatment of caries lesions, bonding is increasingly performed to demineralize CAD, which is susceptible to remineralization. A useful protocol to standardize the production of CAD, by microbiological cariogenic challenge, would be an important contribution to laboratorial test in the field of operative dentistry.

Is just one screw really enough? Single- versus double-screw in the medial malleolus in supination-external rotation ankle fractures: A comparative biomechanical study using partially threaded cancellous screws.

OBJECTIVE: The aim of this study is to investigate stiffness and the maximum load to failure values of single- and double-screw fixation of oblique medial malleolus fractures using partially threaded cancellous screws. Our hypothesis is that single-screw fixation of medial malleolus fractures after SER injuries provides similar stiffness when compared with double-screw fixation. DESIGN: Biomechanical study. METHODS: Twelve composite polyurethane synthetic right distal tibiae were used in the experiment. Oblique fractures of the medial malleolus were created with a band saw using a custom-made osteotomy guide to standardize the cuts in all models. Bone models were randomly separated into two groups and fixed with one (n = 6) or two (n = 6) 4.0 mm partially threaded cancellous screws placed perpendicular to the fracture line. These were tested by applying an offset axial tension at 10 mm/minute up to maximum load displacement, defined as subsidence of the medial malleolus fragment. Maximum load to failure was determined for the groups at the point where the curve ceased to be linear and suffered an inflection. Force versus displacement curves were obtained and recorded. The student's t-test for independent samples was used to compare stiffness (N / mm) and maximum load (N) between experimental groups, with a p value of < 0.05. RESULTS: There were no significant differences in stiffness (p = 0.290) and maximum load (p = 0.191) among the two fixation constructs. Mean stiffness was 62.26 (±SD 21.11) N/mm for double-screw fixation group and 48.24 (±SD 22.40) N/mm for single-screw fixation group. Mean maximum load was 387.83 (±SD 115.78) N for double-screw fixation group and 306.64 (±SD 81.97) N for single-screw fixation group. CONCLUSION: Fixation with one 4.0 mm partially threaded cancellous screw was not shown to be biomechanically inferior to fixation with two 4.0 mm partially threaded cancellous screws in an oblique fracture of the medial malleolus, supporting previous clinical studies that have shown that one screw is sufficient for fractures of the medial malleolus.

Comparison of biofilm models for producing artificial active white spot lesions.

OBJECTIVE: This study compared three protocols for developing artificial white spot lesions (WSL) using biofilm models. METHODOLOGY: In total, 45 human enamel specimens were sterilized and allocated into three groups based on the biofilm model: Streptococcus sobrinus and Lactobacillus casei (Ss+Lc), Streptococcus sobrinus (Ss), or Streptococcus mutans (Sm). Specimens were incubated in filter-sterilized human saliva to form the acquired pellicle and then subjected to the biofilm challenge consisting of three days of incubation with bacteria (for demineralization) and one day of remineralization, which was performed once for Ss+Lc (four days total), four times for Ss (16 days total), and three times for Sm (12 days total). After WSL creation, the lesion fluorescence, depth, and chemical composition were assessed using Quantitative Light-induced Fluorescence (QLF), Polarized Light Microscopy (PLM), and Raman Spectroscopy, respectively. Statistical analysis consisted of two-way ANOVA followed by Tukey's post hoc test (α=0.05). WSL created using the Ss+Lc protocol presented statistically significant higher fluorescence loss (ΔF) and integrated fluorescence (ΔQ) in comparison to the other two protocols (p<0.001). RESULTS: In addition, Ss+Lc resulted in significantly deeper WSL (137.5 µm), followed by Ss (84.1 µm) and Sm (54.9 µm) (p<0.001). While high mineral content was observed in sound enamel surrounding the WSL, lesions created with the Ss+Lc protocol showed the highest demineralization level and changes in the mineral content among the three protocols. CONCLUSION: The biofilm model using S. sobrinus and L. casei for four days was the most appropriate and simplified protocol for developing artificial active WSL with lower fluorescence, higher demineralization, and greater depth.

Doctor, When Should I Start Walking? Revisiting Postoperative Rehabilitation and Weight-Bearing Protocols in Operatively Treated Acetabular Fractures: A Systematic Review and Meta-Analysis.

Background and Objectives: Management of acetabular fractures is aimed at anatomically reducing and fixing all displaced or unstable fractures, as the accuracy of fracture reduction has been demonstrated to strongly correlate with clinical outcomes. However, there is a noticeable gap in the literature concerning the perioperative and postoperative care of patients with acetabular fractures, which ultimately can be potential risk factors for adverse outcomes and permanent disabilities. This study aimed to systematically review the available literature regarding rehabilitation practices, including weight-bearing protocols, across time points in surgically treated acetabular fracture patients and correlate these practices with functional outcomes. Methods: We systematically reviewed the Medline and PubMed databases and the Cochrane Central Register of Controlled Trials in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. The inclusion criteria were studies with adult patients (19+ years), publications from the last 10 years, articles focusing on rehabilitation or mentioning any aspect related to rehabilitation (such as weight-bearing or muscle training), and describing the surgical management of acute, isolated acetabulum fractures. Specific information was collected, including the fracture classification, time to surgery, surgical approach, surgical time, blood loss, fixation strategy, quality of reduction, postoperative rehabilitation protocol, complication rate, type(s) of complication, and outcome measurement(s). The choice(s) of surgical approach, surgical time, blood loss, and fixation strategy were stratified based on the fracture classification. The complication rate and type(s) of complication were calculated for all studies. Fractures were classified based on the Letournel classification. Results: A total of 494 articles were identified from the initial search, of which 22 (1025 patients) were included in the final review. The most common rehabilitation protocol favored isometric quadriceps and abductor strengthening exercises starting on the first postoperative day, with passive hip movement at 1-3 days postoperatively and active hip movement ranging from the first postoperative day to 4 weeks postoperatively. Partial weight-bearing with a walker or a pair of crutches was permitted from 1 to 12 weeks after surgery, and full weight-bearing was allowed depending on the patient's general condition and fracture healing state (generally at the end of 3 months). In only three studies did the patients start bearing weight in the early postoperative period (≤1 week). Meta-regression analysis was not performed due to the discrepancy between studies that reported a weight-bearing protocol ≤1 week and >1 week postoperatively. Conclusions: Our study suggests that an accelerated postoperative rehabilitation protocol, including early permissive weight-bearing, does not appear to increase the risk of loss of reduction or the rate of complications after surgical treatment of acetabular fractures. However, a proper meta-analysis was not possible, and the heterogeneity of the included studies did not allow us to conclude anything about the potential biomechanical and clinical benefits nor the negative effects related to this rehabilitation regimen in terms of functional results. There is an inconsistent use of PROMs for objectively calculating the effect size of the accelerated protocol compared with restricted weight-bearing regimes. We pose the need for higher-level evidence to proof our hypothesis.