RESUMEN
Polylactide (PLA) crystallizes to form extended-chain crystals in a Langmuir monolayer because crystallization is accelerated on the water surface. This is a unique situation where chain packing can be analyzed by simply measuring the lamellar thickness. Herein, star-shaped poly(l-lactide)s (PLLAs) with 2-12 arms were synthesized through the polymerization of l-lactide with various polyols as initiators, and their crystallization behavior in a monolayer was studied via atomic force microscopy. The PLLAs comprising 2-4 arms crystallized with all arms aligned in the same direction and being folded at the central polyol unit. Meanwhile, the PLLAs comprising 6 and 12 arms crystallized with both halves of the arms extended from the center to the opposite directions, most likely due to the steric hindrance of the crowded arms. Considering that the PLLAs crystallized from a once-formed condensed amorphous state during compression, they have a strong tendency to crystallize with the arms aligned in the same direction. The crystallization rate of star-shaped PLAs is known to reduce compared with that of a linear PLA even if the number of arms is as few as 2. This should be closely related to the unique crystallization behavior of the star-shaped PLLAs with the arms aligned in the same direction.
RESUMEN
The Drosophila Toll-1 receptor is involved in embryonic development, innate immunity, and tissue homeostasis. Currently, as a ligand for the Toll-1 receptor, only Spätzle (Spz) has been identified and characterized. We previously reported that Drosophila larva-derived tissue extract contains ligand activity for the Toll-1 receptor, which differs from Spz based on the observation that larval extract prepared from spz mutants possessed full ligand activity. Here, we demonstrate that Spz5, a member of the Spz family of proteins, functions as a ligand for the Toll-1 receptor. Processing of Spz5 by Furin protease, which is known to be important for ligand activity of Spz5 to Toll-6, is not required for its function to the Toll-1 receptor. By generating a spz5 null mutant, we further showed that the Toll-1 ligand activity of larva-derived extract is mainly derived from Spz5. Finally, we found a genetic interaction between spz and spz5 in terms of developmental processes. This study identified a novel ligand for the Drosophila Toll-1 receptor, providing evidence that Toll-1 is a multi-ligand receptor, similar to the mammalian Toll-like receptor.
Asunto(s)
Proteínas de Drosophila/metabolismo , Drosophila melanogaster/metabolismo , Receptores Toll-Like/metabolismo , Animales , Epistasis Genética , Larva/metabolismo , Ligandos , Proteolisis , Extractos de TejidosRESUMEN
Low molecular weight cationic compounds were synthesized from re-purposed poly(ethylene teraphthalate) (PET) and used to self-assemble into high aspect ratio supramolecular nanofibers for encapsulation and delivery of anionic antibiotics. The antibiotic piperacillin/tazobactam (PT) was successfully loaded into the nanofibers through ionic interaction between anionic PT and the cationic nanofibers without loss of the nanofiber features. These PT-loaded nanofibers demonstrated high loading efficiency and sustained delivery for PT. The antimicrobial activity of PT-loaded nanofibers remained potent towards both Gram-positive and Gram-negative bacteria. Importantly, in a P. aeruginosa-infected mouse skin wound model, the treatment with the PT-loaded nanofibers was more effective than free PT for wound healing as evidenced by the significantly lower P. aeruginosa counts at the wound sites and histological analysis. This strategy can be applied to deliver a variety of anionic antibiotics for improved treatment efficacy of various infections.
Asunto(s)
Antibacterianos/administración & dosificación , Cationes/química , Nanofibras/química , Tereftalatos Polietilenos/química , Infecciones por Pseudomonas/tratamiento farmacológico , Animales , Antibacterianos/química , Portadores de Fármacos , Reposicionamiento de Medicamentos , Ratones , Ratones Endogámicos C57BL , Infecciones por Pseudomonas/microbiología , Infecciones por Pseudomonas/patología , Pseudomonas aeruginosa/efectos de los fármacos , Piel/efectos de los fármacos , Piel/microbiología , Piel/patología , Cicatrización de Heridas/efectos de los fármacosRESUMEN
We developed a biodegradable polycarbonate that demonstrates antithrombogenicity and vascular cell adhesion via organocatalytic ring-opening polymerization of a trimethylene carbonate (TMC) analogue bearing a methoxy group. The monoether-tagged polycarbonate demonstrates a platelet adhesion property that is 93 and 89% lower than those of poly(ethylene terephthalate) and polyTMC, respectively. In contrast, vascular cell adhesion properties of the polycarbonate are comparable to those controls, indicating a potential for selective cell adhesion properties. This difference in the cell adhesion property is well associated with surface hydration, which affects protein adsorption and denaturation. Fibrinogen is slightly denatured on the monoether-tagged polycarbonate, whereas fibronectin is highly activated to expose the RGD motif for favorable vascular cell adhesion. The surface hydration, mainly induced by the methoxy side chain, also contributes to slowing the enzymatic degradation. Consequently, the polycarbonate exhibits decent blood compatibility, vascular cell adhesion properties, and biodegradability, which is promising for applications in resorbable vascular grafts and stents.
Asunto(s)
Plásticos Biodegradables/química , Adhesión Celular/efectos de los fármacos , Adhesividad Plaquetaria/efectos de los fármacos , Cemento de Policarboxilato/química , Materiales Biocompatibles/síntesis química , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Plásticos Biodegradables/síntesis química , Plásticos Biodegradables/farmacología , Plaquetas/efectos de los fármacos , Células Endoteliales/efectos de los fármacos , Células Endoteliales de la Vena Umbilical Humana , Humanos , Cemento de Policarboxilato/síntesis química , Cemento de Policarboxilato/farmacología , Stents , Injerto Vascular/métodosRESUMEN
Fighting the resistance: biodegradable and injectable/moldable hydrogels with hierarchical nanostructures were made with broad-spectrum antimicrobial activities and biofilm-disruption capability. They demonstrate no cytotoxicity in vitro, and show excellent skin biocompatibility in animals. These hydrogels have great potential for clinical use in prevention and treatment of various multidrug-resistant infections.
Asunto(s)
Antibacterianos/química , Antibacterianos/farmacología , Biopelículas/efectos de los fármacos , Hidrogeles/química , Hidrogeles/farmacología , Microscopía ElectrónicaRESUMEN
Side-chain-functionalized aliphatic polyesters are promising as functional biodegradable polymers. We have investigated ring-opening reactions of γ-carbonyl-substituted ε-caprolactones (gCCLs) to obtain poly(ε-caprolactone) (PCL) analogues. Organic catalysts and Sn(Oct)2 often used for the ring-opening polymerization (ROP) of ε-caprolactone (CL) have been explored to find the conditions for the formation of polymeric products of gCCLs. We confirmed the consumption of gCCLs in all catalyzed reactions. However, chain propagation hardly occurs, as the propagating species are preferentially transformed to α-substituted five-membered lactones when the substituents are linked by ester or not sterically hindered. Intramolecular cyclization to form thermodynamically stable five-membered lactones releases alcohols and amines, serving as nucleophiles for the subsequent ring opening of other gCCLs. Thus, apparent chain reactions are realized for continuous consumption of gCCLs. The reaction preference remains unchanged independent of the catalysts, although the reactions of the amide-linked gCCLs by acidic catalysts are slightly mitigated. Finally, copolymerization of CL and a gCCL catalyzed by diphenyl phosphate has been investigated, which enables the chain propagation reaction to yield the linear oligomers of PCL analogues containing up to 16 mol% of gCCL units. This study contributes to understanding the chemistry of ring-opening reactions of substituted lactones for designing functional degradable polymers.
RESUMEN
We describe investigations with B3LYP density functional theory to probe mechanisms for the organocatalyzed depolymerization of poly(ethylene) terephthalate (PET) into ester and amide products. These investigations utilize model systems involving the trans-esterification and amidation of methylbenzoate (MB) with ethylene glycol (EG), ethylenediamine (EDA), and ethanolamine (EA) organocatalyzed by 1,5,7-triazabicyclododecene (TBD) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU). Mechanisms for reactions in which TBD acts as the lone catalyst have been compared with pathways in which TBD and DBU catalyze these processes with an additional molecule of the amine or alcohol acting as a cocatalyst. Calculations suggest that the combination of an organocatalyst with a molecule of an alcohol or amine cocatalyst is slightly more activating than a lone catalyst. Our results predict that nucleophilic attack is the rate-determining step in reactions involving EDA and EG and that TBD is a better catalyst than DBU in the amidation of MB with EDA; in addition, both organocatalysts activate alcohols more than amines during nucleophilic attack. Amidation and trans-esterification possess similar barriers for reactions involving EA; but the amide, which is the thermodynamic product, is preferentially formed instead of the ester.
RESUMEN
Actin-mediated mechanical forces are central drivers of cellular dynamics. They generate protrusive and contractile dynamics, the latter of which are induced in concert with myosin II bundled at the site of contraction. These dynamics emerge concomitantly in tissues and even each cell; thus, the tight regulation of such bidirectional forces is important for proper cellular deformation. Here, we show that contractile dynamics can eventually disturb cell-cell junction contraction in the absence of p21-activated kinase 3 (Pak3). Upon Pak3 depletion, contractility induces the formation of abnormal actin protrusions at the shortening junctions, which causes decrease in E-cadherin levels at the adherens junctions and mislocalization of myosin II at the junctions before they enough shorten, compromising completion of junction shortening. Overexpressing E-cadherin restores myosin II distribution closely placed at the junctions and junction contraction. Our results suggest that contractility both induces and perturbs junction contraction and that the attenuation of such perturbations by Pak3 facilitates persistent junction shortening.
Asunto(s)
Actinas , Quinasas p21 Activadas , Actinas/fisiología , Uniones Adherentes/fisiología , Cadherinas , Células Epiteliales , Retroalimentación , Uniones Intercelulares , Miosina Tipo II , Uniones Estrechas , Quinasas p21 Activadas/genéticaRESUMEN
Polymers that are biocompatible and degradable are desired for tissue engineering approaches in the treatment of vascular diseases, especially for those involving small-diameter blood vessels. Herein, we report the compatibility of a newly developed glycerol-based aliphatic polycarbonate possessing simple methoxy side groups, named poly(5-methoxy-1,3-dioxan-2-one) (PMDO), with blood cells and plasma proteins as well as its susceptibility to hydrolysis. As a consequence of the organocatalytic ring-opening polymerization (ROP) of a methoxy-functionalized cyclic carbonate derived from glycerol, PMDO with a sufficiently high molecular weight (Mn 14 kg/mol) and a narrow distribution (D̵M 1.12) was obtained for evaluation as a bulk biomaterial. This study demonstrates for the first time the organocatalytic ROP of a glycerol-based cyclic carbonate in a controlled manner. Compared with the clinically applied aliphatic polycarbonate poly(trimethylene carbonate) (PTMC), PMDO inhibits platelet adhesion by 33% and denaturation of fibrinogen by 23%. Although the wettability of PMDO based on water contact angle was almost comparable to those of PTMC and poly(ethylene terephthalate), the reason for the inhibited platelet adhesion and protein denaturation appeared to be related to the presence of specific hydrated water formed in the hydrated polymer. The improved hydration of PMDO also enhanced the susceptibility to hydrolysis, with PMDO demonstrating a slightly higher hydrolytic property than PTMC. This simple glycerol-based aliphatic polycarbonate has the following benefits: bio-based characteristics of glycerol and improved blood compatibility and hydrolytic biodegradability stemming from moderate hydration of the methoxy side groups.
Asunto(s)
Glicerol , Polímeros , Carbonatos , Hidrólisis , Cemento de PolicarboxilatoRESUMEN
In various coastal areas of Japan, naturalized radish populations are observed. Radish is a cruciferous plant and exhibits self-incompatibility, involving a system controlled by a single locus with multiple S alleles. Although the S allele diversity of radish cultivars and wild radishes has been characterized, the S allele distribution in naturalized populations has not yet been analyzed in relation to the positions of the plants in situ. Here, we show the S allele distribution in naturalized radish populations of Yakushima, a small island in the East China Sea, with positions of the plants. Radish plants were sampled in coastal areas in Yakushima, and their S alleles were detected and characterized. Most of the S alleles had been previously identified in radish cultivars. However, four novel S alleles, which may be unique to Yakushima, were also found. Moreover, seeds in siliques from plants growing in the study areas were sampled, and S allele determination in DNA extracted from these seeds suggested that the plants had exchanged their pollen among their close neighbors. There was also a problem in that the PCR amplification of some SRK alleles was difficult because of their sequence diversity in the naturalized populations, as occurs in cultivars. Our results suggest that the exchange of S alleles between cultivars and naturalized populations occurs and that S alleles in naturalized populations are highly diverse. The methodology established in our study should be applicable to other self-incompatible species to dissect the diversity of S allele distribution in naturalized populations.
Asunto(s)
Brassicaceae , Raphanus , Alelos , Brassicaceae/genética , Japón , Polen , Raphanus/genéticaRESUMEN
An improved two-step synthetic route to functionalized cyclic carbonate monomers that features a novel cyclic carbonate intermediate with an active pentafluorophenyl ester group (MTC-OPhF(5)) has been developed. The versatile pentafluorophenyl ester intermediate can be synthesized on the gram to kilogram scale in one high-yielding step and is easy to store and handle on the benchtop. The active pentafluorophenyl ester of MTC-OPhF(5) is amenable to further substitution with suitable nucleophiles such as alcohols and amines to generate functionalized cyclic carbonates in high yields. The substitution reaction is tolerant of a wide variety of functionalities, including various hydrophobic and hydrophilic groups, reactive functionalities (via thiol-ene click chemistry or alkyl halides), and protected acids, alcohols, thiols, and amines. In view of the ever-increasing need for biodegradable and biocompatible polymers, this new methodology provides a simple and versatile platform for the synthesis of new and innovative materials.
Asunto(s)
Carbonatos/síntesis química , Fluorobencenos/química , Fenoles/química , Carbonatos/química , Ciclización , ÉsteresRESUMEN
Polymeric micelles comprising a hydrogen-bonding core were formed from block copolymers with pendant urea groups and explored as drug delivery vehicles. The amphiphilic block copolymers were synthesized by organocatalytic ring opening polymerization (ROP) of urea-functionalized cyclic carbonates from a poly(ethylene glycol) macroinitiator. The urea functionality was incorporated because its ability to increase the hydrophobic core's affinity toward polar organic compounds through intermolecular hydrogen bonding. Doxorubicin (DOX), a lipophilic anticancer drug with hydrogen-bonding functionalities, was systematically incorporated into the micelle's hydrophobic interior via hydrogen bonding to the functionalized monomers. Micelles employing urea groups were found to more efficiently interact with DOX thus allowing increased drug loading capacity while maintaining a desirable micellular size. More importantly, while DOX-loaded micelles were shown to kill HepG2 human liver carcinoma cell lines efficiently, all of the polymers were non-cytotoxic.
RESUMEN
A simple and versatile approach to miktoarm co- and terpolymers from carbonate functional oligomers is described. The key building block employed is a carboxylic acid functional cyclic carbonate, derived from 2,2-bis(methylol)propionic acid, that was readily coupled to a hydroxyl functional monomethylether poly(ethylene glycol) oligomer. Ring-opening of the cyclic carbonate using functional amines generates a carbamate linkage bearing a functional group capable of initiating either controlled radical or ring-opening polymerization, together with a primary hydroxyl group for ring-opening polymerization. Two tandem polymerization steps were possible which add the second two arms, thus generating the targeted ABC miktoarm terpolymer. The resulting amphiphilic miktoarm terpolymers containing poly(D- and L-lactide) formed polylactide stereocomplexes in the bulk. In aqueous solution, the stereocomplex mixture of Y-shaped miktoarm copolymers, poly(ethylene glycol)-poly(D-lactide)-poly(D-lactide) and poly(ethylene glycol)-poly(L-lactide)-poly(L-lactide), or the stereoblock miktoarm poly(ethylene glycol)-poly(D-lactide)-poly(L-lactide) form stabilized micelles with a significantly lower critical micelle concentration than those derived from conventional stereo regular linear or Y-shaped amphiphiles. This simple and versatile approach provides a useful synthetic route to complex macromolecular architectures that can assemble into stable micelles. These micelles provide high capacity for loading of the anticancer drug paclitaxel and possess narrow size distribution as well as unique structure, leading to sustained and near zero-ordered release of drug without significant initial burst.
Asunto(s)
Micelas , Paclitaxel/administración & dosificación , Polímeros/química , Rastreo Diferencial de Calorimetría , Espectroscopía de Resonancia Magnética , Microscopía Electrónica de Transmisión , Espectrometría de FluorescenciaRESUMEN
Once around the block: Incorporation of a rigid hydrogen-bonding benzamide unit, placed at the interface between two polymer blocks, in poly(ethylene glycol) (PEG)-(thio)urea-poly(L-lactide) (PLLA) block copolymers transforms the morphology of the block copolymers, from spherical micelles, as formed by PEG-PLLA diblock copolymers, into nanotubes in solution.
RESUMEN
Cationic aliphatic polycarbonates bearing primary ammonium side chains have been developed with relatively high molecular weights and controlled macromolecular architectures. These polycarbonates exhibit reasonable antimicrobial activity against Gram-negative and Gram-positive bacteria. The prepared homopolymers could be effective against Gram-negative bacteria whose growth is usually inhibited by copolymers with hydrophobic comonomer units when quaternary ammonium salts (QAS) are used at the cationic side chains. A methoxyethyl (ME) side chain was explored as a comonomer unit for modulating biological activities, besides conventional hydrophobic side chains including ethyl and benzyl groups. In contrast to the ethyl side chain that increases both antimicrobial and hemolytic activities, the ME side chain serves to enhance the antimicrobial activity, but suppresses the hemolytic activity. This could be attributed to the unique characteristics of an aliphatic polycarbonate bearing a ME side chain: hemocompatibility, cell adhesion property, and selective interactions with proteins. The benefits of blood compatibility of the cationic aliphatic polycarbonates with the use of the primary ammonium side chains have been reported for the first time. The polycarbonate main chain is subjected to hydrolysis, which reduces the inherent cytotoxicity of polycations. This hydrolytic property is specific to these primary ammonium-tagged polycarbonates and could be an advantage over previously reported QAS-tagged antimicrobial polycarbonates.
Asunto(s)
Compuestos de Amonio/química , Antibacterianos/química , Antibacterianos/farmacología , Interacciones Hidrofóbicas e Hidrofílicas , Cemento de Policarboxilato/química , Cemento de Policarboxilato/farmacología , Animales , Antibacterianos/toxicidad , Bacillus subtilis/efectos de los fármacos , Escherichia coli/efectos de los fármacos , Hemólisis/efectos de los fármacos , Hidrólisis , Pruebas de Sensibilidad Microbiana , Cemento de Policarboxilato/toxicidad , Relación Estructura-ActividadRESUMEN
Biocompatible amphiphilic block copolymers comprised of poly(ethylene glycol) (PEG) as the hydrophilic component and a poly(methylcarboxytrimethylene carbonate) (PMTC) as a hydrophobic backbone having either poly(L-lactide) (L-PLA) or poly(D-lactide) (D-PLA) branches were prepared by organocatalytic ring-opening polymerization (ROP). The polycarbonate backbone was prepared by copolymerization of two different MTC-type monomers (MTCs) including a tetrahydropyranyloxy protected hydroxyl group, a masked initiator for a subsequent ROP step. Interestingly, the organic catalyst used in the ROP of MTCs was also effective for acetylation of the hydroxyl end-groups by the addition of acetic anhydride added after polymerization. Acidic deprotection of the tetrahydropyranyloxy (THP) protecting group on the carbonate chain generated hydroxyl functional groups that served as initiators for the ROP of either D- or L-lactide. Comb-shaped block copolymers of predictable molecular weights and narrow polydispersities (approximately 1.3) were prepared with up to 8-PLA branches. Mixtures of the D- and L-lactide based copolymers were studied to understand the effect of noncovalent interactions or stereocomplexation on the properties.
Asunto(s)
Materiales Biocompatibles/química , Polímeros/química , Catálisis , Dioxanos , Cemento de Policarboxilato , PolietilenoRESUMEN
A new pH-responsive hydrogel biomaterial, that is composed of solely two popular biocompatible materials, oligodeoxynucleotides (ODN) and polyethylene glycol (PEG) have been prepared. Merely five deoxycytidine residues were elongated to the ends of linear or 4-arm PEG in ×1000 larger scale than conventional systems by using liquid-phase DNA synthesis technique, and applied them as a macromonomer for the preparation of hydrogels. The syntheses of the conjugates are simply elongating ODN onto the ends of PEG as a semisolid phase substrate using standard phosphoramidite chemistry. The resulting dC5-PEG conjugates gave quite stable and stiff hydrogels triggered by the formation of a unique DNA quadruplex, i-motif. Introduction of only one chemical linkage between two linear conjugates resulted in unexpectedly high thermal stabilities for the melting temperatures of i-motifs themselves. Nonlinearly improved rheological properties compared to the original linear conjugates were also observed, probably because of topological entanglement between macromonomers of fused circles.
RESUMEN
Stereoblock poly(lactic acid) (sb-PLA) is incorporated into a 1:1 polymer blend system of poly(L-lactic acid) (PLLA) and poly(D-lactic acid) (PDLA) that has a high molecular weight to study its addition effect on the stereocomplex (sc) formation of PLLA and PDLA. The ternary polymer blend films are first prepared by casting polymer solutions of sb-PLA, PLLA, and PDLA with different compositions. Upon increasing the content of sb-PLA in the blend films the sc crystallization is driven to a higher degree, while the formation of homo-chiral (hc) crystals is decreased. Lowering the molecular weight of the incorporated sb-PLA effectively increases the sc formation. Consequently, it is revealed that sb-PLA can work as a compatibilizer to improve the poor sc formation in the polymer blend of PLLA and PDLA.
Asunto(s)
Ácido Láctico/síntesis química , Polímeros/síntesis química , Cromatografía en Gel , Cristalización/métodos , PoliésteresRESUMEN
A new class of hydrogels utilizing DNA (DNA quadruplex gel) has been constructed by directly and symmetrically coupling deoxynucleotide phosphoramidite monomers to the ends of polyethylene glycols (PEGs) in liquid phase, and using the resulting DNA-PEG-DNA triblock copolymers as macromonomers. Elongation of merely four deoxyguanosine residues on PEG, which produces typically ≈10â grams of desired DNA-PEG conjugates in one synthesis, resulted in intelligent and biodegradable hydrogels utilizing DNA quadruplex formation, which are responsive to various input signals such as Na+ , K+ , and complementary DNA strand. Gelation of DNA quadruplex gels takes place within a few seconds upon the addition of a trigger, enabling free formation just like Ca+ -alginate hydrogels or possible application as an injectable polymer (IP) gel. The obtained hydrogels show good thermal stability and rheological properties, and even display self-healing ability.
Asunto(s)
G-Cuádruplex , Hidrogeles/química , Polietilenglicoles/química , Estructura MolecularRESUMEN
Stereoblock poly(lactic acid) consisting of D- and L-lactate stereosequences can be successfully synthesized by solid-state polycondensation of a 1:1 mixture of poly(L-lactic acid) and poly(D-lactic acid). In the first step, melt-polycondensation of L- and D-lactic acids is conducted to synthesize poly(L-lactic acid) and poly(D-lactic acid) with a medium-molecular-weight, respectively. In the next step, these poly(L-lactic acid) and poly(D-lactic acid) are melt-blended in 1:1 ratio to allow formation of their stereocomplex. In the last step, this melt-blend is subjected to solid-state polycondensation at temperature where the dehydrative condensation is allowed to promote chain extension in the amorphous phase with the stereocomplex crystals preserved. Finally, stereoblock poly(lactic acid) having high-molecular-weight is obtained. The stereoblock poly(lactic acid) synthesized by this way shows a higher melting temperature in consequence of the controlled block lengths and the resulting higher-molecular-weight. The product characterization as well as the optimization of the polymerization conditions is described. Changes in M(w) of stereoblock poly(lactic acid) (sb-PLA) as a function of the reaction time.