The Morphologic Patella Entry Point Into the Proximal Trochlea Is More Lateral in Recurrent Dislocators Than Controls as Measured by Entry Point-Trochlear Groove Angle.

PURPOSE: To create a metric for evaluating the degree of laterality of the patella's entry into the trochlea, the entry point-trochlear groove (EP-TG) angle, and to evaluate if this laterality is associated with recurrent patella instability. METHODS: The time frame of the study was January 2020 to February 2023. The inclusion criteria were patients treated by the senior author (J.P.F.) (with the exception of 2 patients who were treated by another provider at the institution who was aware of the study) who have been diagnosed with recurrent atraumatic patellar dislocations. Controls without knee pathology were selected from the New Mexico Decedent Imaging Database (NMDID). Simpleware ScanIP was used to create 3-dimensional (3D) models of the distal femurs from computed tomography scans. Anteroposterior images of these 3D models were uploaded to a custom EP-TG angle measuring tool. Three measurers used the tool to measure the EP-TG angle of the distal femurs. RESULTS: Twenty-eight patients were included for the recurrent dislocator group. Twenty-four decedents from the NMDID were selected for the control group, each with a left or right knee chosen randomly for measurement. A 1-sided Mann-Whitney U test, used to evaluate whether the recurrent dislocators had higher EP-TG angle values, yielded a P value <.001, demonstrating a high level of significance. A Bayesian mixed-effect model, used to determine how different the EP-TG angles are between the 2 groups, gave a posterior predictive interval of [11.93°, 19.12°] for the EP-TG angle shift of dislocators. The intraclass correlation coefficient was 0.648. CONCLUSIONS: The morphologic entry point of the patella into the proximal trochlea is more lateral in recurrent patella dislocators than in controls. This increased laterality can be measured by the EP-TG angle, which may be useful information for optimizing treatment of recurrent patella instability. LEVEL OF EVIDENCE: Level III, case control study.

Editorial Commentary: The Best Medial Patellofemoral Reconstruction May Include Components of Both Quadriceps and Patellar Attachments.

Given different functions of the medial quadriceps tendon-femoral ligament and medial patellofemoral ligament components of the proximal medial patellar restraints, reconstructions to the midpoint of the medial patellofemoral ligament and medial quadriceps tendon-femoral ligament are probably optimal, combining the benefits of both in surgical treatment of recurrent patella instability.

Repair of the medial patellofemoral ligament with suture tape augmentation leads to similar primary contact pressures and joint kinematics like reconstruction with a tendon graft: a biomechanical comparison.

PURPOSE: To compare suture tape-augmented MPFL repair with allograft MPFL reconstruction using patellofemoral contact pressure and joint kinematics to assess the risk of patellofemoral over-constrainment at point zero. METHODS: A total of ten fresh frozen cadaveric knee specimens were tested in four different conditions of the MPFL: (1) native, (2) cut, (3) reconstructed with tendon graft, and (4) augmented with suture tape. The patellofemoral mean pressure (MP), peak pressure (PP) and contact area (CA) were measured independently for the medial and lateral compartments using pressure-sensitive films. Patellar tilt (PT) and shift (PS) were measured using an optical 3D motion tracking system. Measurements were recorded at 0°, 10°, 20°, 30°, 60° and 90° of flexion. Both the tendon graft and the internal brace were preloaded with 2 N, 5 N, and 10 N. RESULTS: There was no significant differences found between surgical methods for medial MP, medial PP, medial CA, lateral MP and PS at any preload or flexion angle. Significant differences were seen for lateral PP at 20° knee flexion and 10 N preload (suture tape vs. reconstruction: 1045.9 ± 168.7 kPa vs. 1003.0 ± 151.9 kPa; p = 0.016), for lateral CA at 10° knee flexion and 10 N preload (101.4 ± 39.5 mm2 vs. 108.7 ± 36.6 mm2; p = 0.040), for PT at 10° knee flexion and 2 N preload (- 1.9 ± 2.5° vs. - 2.5 ± 2.3°; p = 0.033) and for PT at 0° knee flexion and 10 N preload (- 0.8 ± 2.5° vs. - 1.8 ± 3.1°; p = 0.040). A preload of 2 N on the suture tape was the closest in restoring the native joint kinematics. CONCLUSIONS: Suture tape augmentation of the MPFL resulted in similar primary contact pressures and joint kinematics in comparison with MPFL reconstruction using a tendon graft. A pretension of 2 N was found to restore the knee joint closest to normal patellofemoral kinematics.

Fifteen-Year Minimum Follow-Up of Anteromedial Tibial Tubercle Transfer for Lateral and/or Distal Patellofemoral Arthrosis.

PURPOSE: To evaluate a minimum 15-year clinical and radiographic follow-up after anteromedial tibial tubercle transfer (anteromedialization [AMZ]) for lateral and/or distal patellar facet arthrosis. METHODS: Patients treated from 1996 to 2000 were contacted. The inclusion criteria were a minimum of 15 years' follow-up after AMZ for isolated persistent retropatellar pain related to lateral and/or distal patellar chondrosis. The exclusion criteria were clinical patellar instability, revision, and significant medial patellar facet or adjacent compartment chondrosis. The anatomic location(s) and severity of arthrosis, as well as the degree of lateral maltracking, were documented. Follow-up data included pain, activity level, and satisfaction. RESULTS: Of 23 patients, 15 met the inclusion criteria. All were women (17 knees) followed up for a mean of 17.1 years (range, 15.4-18.8 years). The mean age at surgery was 29.5 years. Satisfactory results were reported in 94% of knees (16 of 17), based simply on patients' subjective evaluation of the degree of success perceived. An important criterion of satisfaction was that these patients stated they would opt to undergo surgery again under the same circumstances. For 35% of knees, patients reported engaging in recreational activities, whereas for 18%, patients were minimally active. The average pain score (range, 0-10) for 75% was 2.1, and most of these patients showed grade I or II arthrosis. Post-AMZ symptomatic medial patellar subluxation was corrected successfully in 2 patients. Removal of hardware was performed in 59% of knees, and additional procedures were required in 41%. No cases of postoperative lateral patellar instability or conversion to knee arthroplasty occurred. CONCLUSIONS: Anteromedial tibial tubercle transfer without articular cartilage implantation is effective in patellofemoral joint preservation, ameliorating symptoms and facilitating active lifestyles for a minimum of 15 years to nearly 20 years in patients with lateral and/or distal patellofemoral arthrosis. For 94% of knees, patients would choose to undergo the procedure again under the same circumstances. Fifty-nine percent underwent screw removal, and 41% required additional procedures, mostly arthroscopic. No patients in this therapeutic case series underwent an arthroplasty procedure. LEVEL OF EVIDENCE: Level IV, therapeutic cases series.

Radiographic Landmarks for the Anterior Attachment of the Medial Patellofemoral Complex.

PURPOSE: Because fluoroscopy is often used in graft placement during patellar stabilization surgery, the purpose of this study was to describe the radiographic landmarks for the anterior attachment midpoint of the medial patellofemoral complex (MPFC). METHODS: Seventeen fresh-frozen cadaveric knees were dissected, and the MPFC was exposed from the articular side after a lateral parapatellar approach. The midpoint of the anterior attachment of the MPFC was identified using a ruler and marked with a pin. Lateral fluoroscopic images of the patella were then obtained and analyzed using digital analysis software. The distance from the superior articular pole to the pin was divided by the length of the articular surface to describe the location of the pin as a percentage of patellar articular length. RESULTS: Of the 17 cadaveric knees, 2 were excluded because of lack of MPFC fibers. In the remaining 15 knees, the mean (±standard deviation) proximal-distal width of the attachment to the patella and/or vastus intermedius tendon was 41 ± 10 mm, spanning from 15 ± 6 mm proximal to the superior pole of the patella to 27 ± 8 mm distal to it. When viewed on lateral fluoroscopic images, the MPFC midpoint was 19% ± 14% of the patellar articular length from the superior articular pole. CONCLUSIONS: In this study, the radiographic landmarks that correlate to the anatomic midpoint of the anterior MPFC attachment are 19% ± 14% of the articular surface from the superior pole of the patella. CLINICAL RELEVANCE: Recent reports on medial patellofemoral ligament anatomy now include fibers that extend to the quadriceps tendon, summarized as the MPFC. With the inclusion of these fibers, the midpoint of the anterior MPFC attachment is more proximal than that of the medial patellofemoral ligament alone. Because fluoroscopy is often used intraoperatively to guide graft placement, this study correlates radiographic landmarks with anatomic findings of the MPFC midpoint on its attachment to the extensor mechanism.

Correction to: Recognition of evolving medial patellofemoral anatomy provides insight for reconstruction.

Unfortunately, the middle name of author was incorrectly published as Jorge A. Chahla instead of Jorge Chahla in the original article.

Recognition of evolving medial patellofemoral anatomy provides insight for reconstruction.

PURPOSE: The scientific literature concerning the anatomy of medial soft-tissue stabilizers of the patella is growing exponentially. Much of the surgical literature has focused on the role of the medial patellofemoral ligament (MPFL) and techniques to reconstruct it, yet our understanding of its anatomy has evolved during the past several years. Given this, we report on the current understanding of medial patellofemoral anatomy and implications for reconstruction. METHODS: Current and historical studies of medial patellar anatomy were reviewed, which include the MPFL and medial quadriceps tendon femoral ligament (MQTFL), as well as that of the distal medial patellar restraints, the medial patellotibial ligament (MPTL) and medial patellomeniscal ligament (MPML). In addition to the reported findings, the authors' anatomic descriptions of each ligament during their dissections were identified and recorded. RESULTS: Despite the name of the MPFL, which implies that the ligament courses between the femur and patella, recent studies have highlighted the proximal MPFL fibers that attach to the quadriceps tendon, known as the MQTFL. The MPFL and MQTFL have also been referred to as the medial patellofemoral complex, reflecting the variability in anatomical attachment sites. The MPFL accounts for only half of the total restraint to lateral patellar displacement, and the remaining contributions to patellar stability are derived from the combination of the MPTL and MPML, which function primarily in greater degrees of knee flexion. CONCLUSION: The understanding of the complexity of the medial patellar stabilizers continues to evolve. Although MPFL reconstruction is gaining wide acceptance as a procedure to treat patellar instability, it is important to recognize the complex and changing understanding of the anatomy of the medial soft-tissue stabilizers and the implications for reconstruction. LEVEL OF EVIDENCE: V.

Editorial Commentary: Medial Patellofemoral Ligament Reconstruction Alone Works Well When the Patient Has Normal Alignment, But Don't Forget to Move the Tibial Tubercle When Necessary!

Medial patellofemoral ligament reconstruction works very well, regardless of graft choice, for controlling lateral patella instability when performed correctly in patients with normal alignment, even in the face of trochlea dysplasia. However, sometimes a tibial tubercle transfer is necessary in patella instability surgery.

Patellofemoral Contact Pressures After Patellar Distalization: A Biomechanical Study.

PURPOSE: To measure the patellofemoral contact pressure in early flexion after a tibial tubercle distalization osteotomy. METHODS: Ten matched-pair fresh-frozen cadaveric knees were studied. The average Blackburne-Peel ratio of the native knees was 0.91. The knees were placed on a testing rig, with a fixed femur and tibia mobile through 90° of flexion. Individual quadriceps heads and the iliotibial band were separated and loaded with 205 N in anatomic directions using a weighted pulley system. A straight tubercle distalization osteotomy of 1 cm was performed and fixed with screws, with and without a lateral release. Patellofemoral contact pressures were measured at 0°, 10°, 20°, 30°, 45°, 60°, and 90° of flexion using pressure-sensitive films on the medial trochlea and lateral trochlea. Contact force, area, and pressure were measured in the following states: (1) in the native knee, (2) after distalization, and (3) after distalization with lateral release. RESULTS: The average Blackburne-Peel ratio after distalization was 0.64. Tibial tubercle distalization resulted in a 6-fold increase in mean contact pressure at 0° (0.15 MPa vs 0.90 MPa, P < .001) and a 55% increase at 10° of flexion (0.70 MPa vs 1.09 MPa, P = .02). Mean contact pressure was similar from 20° to 90° of flexion (P > .1). After distalization, the total contact area was significantly higher at 0° of flexion (17.7 mm2 vs 58.4 mm2, P = .02). Lateral release after distalization did not significantly change contact pressure (P > .21). CONCLUSIONS: Our results suggest that patella baja, as a result of excessive patellar distalization, can cause increased patellofemoral contact pressures during early flexion at 0° and 10°. No changes were seen in contact pressure from 20° to 90°. CLINICAL RELEVANCE: Care should be taken to prevent excessive distalization of the patella to avoid patella baja and increased patellofemoral contact pressures during early flexion.

Incidence of Early Adverse Events After Tibial Tubercle Osteotomy.

Background: Tibial tubercle osteotomy (TTO) is a commonly utilized surgical procedure for the treatment of patellofemoral instability. Although midterm and long-term outcomes are known, perioperative complications have not been consistently reported. Purpose: To identify the incidence and predictors of adverse events in the first 90-day perioperative period after TTO. Study Design: Case series; Level of evidence, 4. Methods: Patients undergoing primary TTO between January 1, 2010, and December 31, 2019, were included. Readmissions in the first 90 days after surgery were collected, and data were collected for the following variables: age, sex, smoking status, body mass index, laterality, preoperative diagnosis, presence of trochlear dysplasia, tourniquet use, TTO procedure, tibial tubercle distalization, trochleoplasty, chondral procedure, number of screws, and use of an epidural catheter. Predictors of readmission for any reason were identified using multivariable logistic regression analysis. Results: A total of 345 TTO procedures were included in the final analysis. The incidence of readmissions for any reason was 20.6% (71/345). The most common reason for readmission was postoperative pain (26/345 [7.5%]), followed by wound complications (19/345 [5.5%]) and epidural catheter-related complications (overall: 16/345 [4.6%]; specific: 16/167 [9.6%]. The incidence of major complications was 2.0% (7/345). The number of patients with each major complication was as follows: 1 for deep vein thrombosis, 2 for pulmonary embolism, 1 for septic arthritis, 1 for tibial tubercle fracture, and 2 for loss of fixation. Female sex and smoking were associated with readmission for pain. Conclusion: The incidence of major complications after TTO was very low (2.0%), but 20.6% of cases required readmission, primarily for an indwelling epidural catheter (3.5%) and postoperative pain (7.5%). Concomitant soft tissue procedures and the number of screws were associated with readmission after TTO. Utilizing individualized postoperative pain management and preoperative discussions about expected pain may help to avoid readmission for pain after TTO.

Localization of the Adductor Tubercle in the Skeletally Immature: A Computed Tomography Study With Patellofemoral Surgical Implications.

BACKGROUND: The adductor tubercle of the distal femur is utilized by surgeons as an anatomic landmark to identify graft anchor placement during medial patellofemoral ligament (MPFL) and medial quadriceps tendon femoral ligament (MQTFL) reconstruction for patellofemoral instability. In the skeletally immature population, its location relative to the physis has not been well defined. PURPOSE: To identify the location of the adductor tubercle relative to the distal femoral physis in skeletally immature individuals and gain insight regarding optimal graft anchor placement for pediatric patients undergoing MPFL and MQTFL reconstruction. STUDY DESIGN: Descriptive laboratory study. METHODS: Thin-cut computed tomography scans of 37 male cadaveric specimens (age, 4-16 years) were obtained from the New Mexico Decedent Image Database. A measurement protocol to identify the adductor tubercle was created with guidance from a fellowship-trained musculoskeletal radiologist. By utilizing axial, coronal, and sagittal views of knee computed tomography scans, the adductor magnus tendon was identified and followed distally to its insertion (adductor tubercle) on the distal femur. Distance from the midpoint of the adductor magnus tendon insertion relative to the physis in the proximal-distal orientation was measured. The anterior-posterior distance of the midpoint tendon insertion relative to the posterior femoral cortex line was also evaluated. RESULTS: The midpoint of the adductor magnus tendon was at the physis in 30 specimens. One 8-year-old cadaveric specimen had an insertion 1.1 mm distal to the physis. In all specimens ≥15 years old (n = 6), the adductor magnus tendon insertion was distal to the physis with a mean distance of 2.73 mm. The location of the adductor tubercle was always posterior (mean, 5.1 mm) with respect to the posterior femoral cortex line. CONCLUSION: The location of the adductor tubercle in male pediatric patients is likely at or distal to the physis. Thus, the findings of this study directly conflict with previous studies that suggested a more proximal location. CLINICAL RELEVANCE: Optimal graft anchor placement during MPFL and MQTFL reconstruction in the skeletally immature patient can be challenging because of the variability reported in previous studies of the medial patellofemoral complex origin relative to the physis. This study suggests that distal-rather than proximal-graft anchor placement might better help restore patellofemoral isometry.

Three-Dimensional Reproductions for Surgical Decision-Making in the Treatment of Recurrent Patella Dislocation.

Patellofemoral instability may be attributed to a variety of soft tissue and osseous factors, of which dysplasia of the femoral trochlea significantly predisposes patients to recurrent instability events. Surgical planning and decision-making remain wholly predicated upon two-dimensional imaging-derived measurements and classification systems, although aberrant patellar tracking in the setting of trochlea dysplasia is a three-dimensional (3-D) complexity. 3-D reconstructions of the patellofemoral joint (PFJ) may be considered to better comprehend the complex anatomy of patients with recurrent patella dislocation and/or trochlea dysplasia. We describe a classification and integrated interpretation system by which these 3-D reproductions of the PFJ may be analyzed to enhance surgical decision making in the treatment of this condition to achieve optimal joint stability and long-term preservation.

Three-Dimensional Printing of Models of Patellofemoral Joint Articular Cartilage in Patients With Patella Instability for Observing Joint Congruity.

Three-dimensional (3D) modeling and printing are increasingly used in the field of orthopaedic surgery for both research and patient care. One area where they are particularly helpful is in improving our understanding of the patellofemoral (PF) joint. Heretofore, morphological studies that use 3D models of the PF joint have primarily been based on computed tomography imaging data and thus do not incorporate articular cartilage. Here, we describe a method for creating 3D models of the articular surfaces of the PF joint based on magnetic resonance imaging. Models created using this technique can be used to improve our understanding of the morphology of the articular surfaces of the PF joint and its relationship to joint pathologies. Of particular interest is our finding of articular congruity in printed articular cartilage surfaces of dysplastic PF joints of recurrent patella dislocators.

Three-Dimensional Printing of the Patellofemoral Joints of Patellar Instability Patients.

Three-dimensional (3D) modeling and printing comprise an important tool for orthopaedic surgeons. One area in which 3D modeling has the potential to dramatically improve our understanding of biomechanical kinematics is pathologies of the patellofemoral joint, in particular trochlear dysplasia. We describe a method for creating 3D printed models of the patellofemoral joint, including computed tomography image acquisition, image segmentation, model creation, and 3D printing. The models created can help surgeons understand and plan surgery for recurrent patellar dislocations.

A modified Delphi consensus statement on patellar instability: part II.

Aims: The aim of this study was to establish consensus statements on medial patellofemoral ligament (MPFL) reconstruction, anteromedialization tibial tubercle osteotomy, trochleoplasty, and rehabilitation and return to sporting activity in patients with patellar instability, using the modified Delphi process. Methods: This was the second part of a study dealing with these aspects of management in these patients. As in part I, a total of 60 surgeons from 11 countries contributed to the development of consensus statements based on their expertise in this area. They were assigned to one of seven working groups defined by subtopics of interest. Consensus was defined as achieving between 80% and 89% agreement, strong consensus was defined as between 90% and 99% agreement, and 100% agreement was considered unanimous. Results: Of 41 questions and statements on patellar instability, none achieved unanimous consensus, 19 achieved strong consensus, 15 achieved consensus, and seven did not achieve consensus. Conclusion: Most statements reached some degree of consensus, without any achieving unanimous consensus. There was no consensus on the use of anchors in MPFL reconstruction, and the order of fixation of the graft (patella first versus femur first). There was also no consensus on the indications for trochleoplasty or its effect on the viability of the cartilage after elevation of the osteochondral flap. There was also no consensus on postoperative immobilization or weightbearing, or whether paediatric patients should avoid an early return to sport.

A modified Delphi consensus statement on patellar instability: part I.

Aims: The aim of this study was to establish consensus statements on the diagnosis, nonoperative management, and indications, if any, for medial patellofemoral complex (MPFC) repair in patients with patellar instability, using the modified Delphi approach. Methods: A total of 60 surgeons from 11 countries were invited to develop consensus statements based on their expertise in this area. They were assigned to one of seven working groups defined by subtopics of interest within patellar instability. Consensus was defined as achieving between 80% and 89% agreement, strong consensus was defined as between 90% and 99% agreement, and 100% agreement was considered to be unanimous. Results: Of 27 questions and statements on patellar instability, three achieved unanimous consensus, 14 achieved strong consensus, five achieved consensus, and five did not achieve consensus. Conclusion: The statements that reached unanimous consensus were that an assessment of physeal status is critical for paediatric patients with patellar instability. There was also unanimous consensus on early mobilization and resistance training following nonoperative management once there is no apprehension. The statements that did not achieve consensus were on the importance of immobilization of the knee, the use of orthobiologics in nonoperative management, the indications for MPFC repair, and whether a vastus medialis oblique advancement should be performed.

Anatomic guidelines for harvesting a quadriceps free tendon autograft for anterior cruciate ligament reconstruction.

PURPOSE: The purpose of this study was to review the anatomy of the quadriceps tendon and provide guidelines for harvesting the quadriceps tendon for anterior cruciate ligament (ACL) reconstruction. METHODS: Eleven cadaveric knees were dissected, and the quadriceps tendon was analyzed. Multiple measurements of length, depth, and width were taken in a standardized manner for each cadaver and recorded. RESULTS: The quadriceps tendon superficial morphology showed 2 distinct peaks, with the maximum length correlating with the lateral peak. The mean tendon peak length was 88.3 ± 8.4 mm (range, 78.3 to 99.7 mm). The mean width of the quadriceps tendon at its insertion onto the patella was 43.3 ± 5.8 mm (range, 34.3 to 54.1 mm). The quadriceps tendon was noted to be asymmetric, with the maximum tendon length located at 61.6% ± 4.1% of the width from the medial border of the quadriceps tendon insertion. This point was also the maximum tendon depth at insertion. CONCLUSIONS: Quadriceps free tendon graft harvesting should begin by locating the apex (maximum length) of the quadriceps tendon (61% of the distance from the patella's medial edge). The surgeon should then harvest a 10-mm-wide graft centered about 2 mm medial to this point, using the depth of a No. 10 scalpel blade (7 mm) as a guide to thickness to harvest an optimal quadriceps free tendon graft for ACL reconstruction. CLINICAL RELEVANCE: This anatomic study identifies the site of harvest of a quadriceps free tendon autograft (without a patellar bone block) to maximize the length and bulk of the graft for its use in ACL reconstruction.

Coronal Malalignment-When and How to Perform a Tibial Tubercle Osteotomy.

Coronal malalignment of the patellofemoral joint may contribute to both instability as well as pain and joint overload. The use of distal realignment procedures has evolved to include uniplanar and multiplanar osteotomies, which allows patient-specific treatment. With a careful understanding of the complex pathoanatomy, including osseous, soft tissue, and dynamic muscular factors, an appropriately designed tibial tubercle osteotomy (TTO) is an invaluable tool for the orthopedic surgeon to improve joint biomechanics and off-load articular injuries. Current techniques have improved TTO surgery to limit complications and produce reliably good results.

Quadriceps Tendon Attachment Technique for Medial Quadriceps Tendon-Femoral Ligament (MQTFL) Reconstruction in the Surgical Treatment of Recurrent Patella Dislocation.

Medial quadriceps tendon-femoral ligament (MQTFL) reconstruction for prevention of recurrent patella dislocation is an alternative to medial patellofemoral ligament (MPFL) reconstruction. Because the reconstruction graft attaches to the quadriceps tendon, no patella drill hole is required, thereby eliminating iatrogenic fracture risk. The procedure remains anatomically accurate and early results are comparable to MPFL reconstruction for preventing patella dislocation. The MQTFL reconstruction graft is brought up under the vastus medialis obliquus distal to the patella apex, such that its orientation is directed toward the medial patellofemoral complex (MPFC) midpoint, also known as Tanaka's point. The graft is then secured by looping it around the vastus medialis and rectus femoris tendons, after which optimal graft length is easily established by cycling the knee, after which it is sutured securely into the deep quadriceps tendon precisely at the anatomic midpoint of the MPFC. Anatomic reconstruction of the MQTFL-in which graft orientation is crucial-confers reliable patellofemoral joint stability in the surgical treatment of patients with recurrent patella dislocations.

Reconceptualization of Trochlear Dysplasia in Patients With Recurrent Patellar Dislocation Using 3-Dimensional Models.

Background: Common classification schemes, measurements, and surgical planning for trochlear dysplasia are predicated on 2-dimensional imaging views. Purpose: To investigate patellofemoral joint osseous anatomy using 3-dimensional (3D) printed models to describe osseous anatomic trochlear variations in patients with recurrent patellar dislocation. Study Design: Cross-sectional study; Level of evidence, 3. Methods: Computed tomography scans were obtained from 20 patients with recurrent patellar dislocation and 10 healthy control knees, and 3D prints generated from these computed tomography scans were studied with respect to mediolateral positioning of the proximal trochlear groove and groove obliquity as well as changes in the appearance, height, and orientation of the medial and lateral trochlear ridges. Each trochlea was centered with respect to a vertical line perpendicular to the distal femoral condyles and through the central intercondylar notch roof, with the 3D models resting on their posterior femoral condyles. A novel 3D measurement method was devised to assess groove obliquity, termed the entry point-transition point (EP-TP) angle. The EP was defined as the midpoint of the flattened region of the proximal trochlea where the lateral and medial ridges of the proximal trochlea meet, and the TP was the point along the trochlear groove at which the groove shape changes from an oblique orientation proximally to one more vertical distally. Measurements were obtained by 3 reviewers, and reliability analyses were performed. Results: With the dysplastic knees arranged according to flattening of the trochleas, increased obliquity of the trochlear grooves was observed, as reflected by increased EP-TP angles as well as more lateral patellar EPs into the proximal trochleas of these recurrent patellar dislocation knees when compared with the control knees. The degree of trochlear dysplasia (according to the Dejour classification and trochlear flatness in the frontal and axial planes) was associated with diminished prominence of the lateral trochlear convexity, increasingly lateralized proximal trochlear EPs, increased trochlear groove obliquity, lateral trochlear curvature, and progressive medial ridge deformity. Conclusion: The 3D reproductions enabled unique conceptualization of trochlear deformity associated with recurrent patellar dislocation.