An environmental air sampler to evaluate personal exposure to volatile organic compounds.

A micro fabricated chip-based wearable air sampler was used to monitor the personnel exposure of volatile chemical concentrations in microenvironments. Six teenagers participated in this study and 14 volatile organic compounds (VOCs) including naphthalene, 3-decen-1-ol, hexanal, nonanal, methyl salicylate and limonene gave the highest abundance during routine daily activity. VOC exposure associated with daily activities and the location showed strong agreements with two of the participant's results. One of these subjects had the highest exposure to methyl salicylate that was supported by the use of a topical analgesic balm containing this compound. Environmental based air quality monitoring followed by the personnel exposure studies provided additional evidence associated to the main locations where the participants traveled. Toluene concentrations observed at a gas station were exceptionally high, with the highest amount observed at 1213.1 ng m-3. One subject had the highest exposure to toluene and the GPS data showed clear evidence of activities neighboring a gas station. This study shows that this wearable air sampler has potential applications including hazardous VOC exposure monitoring in occupational hazard assessment for certain professions, for example in industries that involve direct handling of petroleum products.

Peak detection and random forests classification software for gas chromatography/differential mobility spectrometry (GC/DMS) data.

Gas Chromatography/Differential Mobility Spectrometry (GC/DMS) is an effective tool to discern volatile chemicals. The process of correlating GC/DMS data outputs to chemical identities requires time and effort from trained chemists due to lack of commercially available software and the lack of appropriate libraries. This paper describes the coupling of computer vision techniques to develop models for peak detection and can align chemical signatures across datasets. The result is an automatically generated peak table that provides integrated peak areas for the inputted samples. The software was tested against a simulated dataset, whereby the number of detected features highly correlated to the number of actual features (r2 = 0.95). This software has also been developed to include random forests, a discriminant analysis technique that generates prediction models for application to unknown samples with different chemical signatures. In an example dataset described herein, the model achieves 3% classification error with 12 trees and 0% classification error with 48 trees. The number of trees can be optimized based on the computational resources available. We expect the public release of this software can provide other GC/DMS researchers with a tool for automated featured extraction and discriminant analysis capabilities.

SPME-based mobile field device for active sampling of volatiles.

Monitoring plant volatile organic compound (VOC) profiles can reveal information regarding the health state of the plant, such as whether it is nutrient stressed or diseased. Typically, plant VOC sampling uses sampling enclosures. Enclosures require time and equipment which are not easily adapted to high throughput sampling in field environments. We have developed a new, easily assembled active sampling device using solid phase microextraction (SPME) that uses a commercial off the shelf (COTS) hand vacuum base to provide rapid and easy mobile plant VOC collection. Calibration curves for three representative plant VOCs (α-pinene, limonene, and ocimene) were developed to verify device functionality and enable the quantification of field-samples from a Meyer lemon tree. We saw that the active sampling allowed us to measure and quantify this chemical in an orchard setting. This device has the potential to be used for VOC sampling as a preliminary diagnostic in precision agriculture applications due to its ease of manufacturing, availability, and low cost of the COTS hand vacuum module.

Portable combination of Fourier transform infrared spectroscopy and differential mobility spectrometry for advanced vapor phase analysis.

Designing mobile devices for the analysis of complex sample mixtures containing a variety of analytes at different concentrations across a large dynamic range remains a challenging task in many analytical scenarios. To meet this challenge, a compact hybrid analytical platform has been developed combining Fourier transform infrared spectroscopy based on substrate-integrated hollow waveguides (iHWG-FTIR) with gas chromatography coupled differential mobility spectrometry (GC-DMS). Due to the complementarity of these techniques regarding analyte type and concentration, their combination provides a promising tool for the detection of complex samples containing a broad range of molecules at different concentrations. To date, the combination of infrared spectroscopy and ion mobility techniques remains expensive and bound to a laboratory utilizing e.g. IMS as prefilter or IR as ionization source. In the present study, a cost-efficient and portable solution has been developed and characterized representing the first truly hyphenated IR-DMS system. As a model analyte mixture, 5 ppm isopropylmercaptan (IPM) in methane (CH4) were diluted, and the concentration-dependent DMS signal of IPM along with the concentration-dependent IR signal of CH4 were recorded for all three hybrid IR-DMS systems. While guiding the sample through the iHWG-FTIR or the GC-DMS first did not affect the obtained signals, optimizing the IR data acquisition parameters did benefit the analytical results.

Identification of fungal metabolites from inside Gallus gallus domesticus eggshells by non-invasively detecting volatile organic compounds (VOCs).

The natural porosity of eggshells allows hen eggs to become contaminated with microbes from the nesting material and environment. Those microorganisms can later proliferate due to the humid ambient conditions while stored in refrigerators, causing a potential health hazard to the consumer. The microbes' volatile organic compounds (mVOCs) are released by both fungi and bacteria. We studied mVOCs produced by aging eggs likely contaminated by fungi and fresh eggs using the non-invasive detection method of gas-phase sampling of volatiles followed by gas chromatography/mass spectrometry (GC/MS) analysis. Two different fungal species (Cladosporium macrocarpum and Botrytis cinerea) and two different bacteria species (Stenotrophomas rhizophila and Pseudomonas argentinensis) were identified inside the studied eggs. Two compounds believed to originate from the fungi themselves were identified. One fungus-specific compound was found in both egg and the fungi: trichloromethane. Graphical abstract Trichloromethane is a potential biomarker of fungal contamination of eggs.

Portable chemical detection platform for on-site monitoring of odorant levels in natural gas.

The adequate odorization of natural gas is critical to identify gas leaks and to reduce accidents. To ensure odorization, natural gas utility companies collect samples to be processed at core facilities or a trained human technician smells a diluted natural gas sample. In this work, we report a detection platform that addresses the lack of mobile solutions capable of providing quantitative analysis of mercaptans, a class of compounds used to odorize natural gas. Detailed description of the platform hardware and software components is provided. Designed to be portable, the platform hardware facilitates extraction of mercaptans from natural gas, separation of individual mercaptan species, and quantification of odorant concentration, with results reported at point-of-sampling. The software was developed to accommodate skilled users as well as minimally trained operators. Detection and quantification of six commonly used mercaptan compounds (ethyl mercaptan, dimethyl sulfide, n-propylmercaptan, isopropyl mercaptan, tert­butyl mercaptan, and tetrahydrothiophene) at typical odorizing concentrations of 0.1-5 ppm was performed using the device. We demonstrate the potential of this technology to ensure natural gas odorizing concentrations throughout distribution systems.

Wearable Environmental Monitor To Quantify Personal Ambient Volatile Organic Compound Exposures.

Air pollution can cause acute and chronic health problems. It has many components, and one component of interest is volatile organic compounds (VOCs). While the outdoor environment may have regulations regarding exposure limits, the indoor environment is often unregulated and VOCs often appear in greater concentrations in the indoor environment. Therefore, it is equally critical to monitor both the indoor and outdoor environments for ambient chemical levels that an individual person is exposed to. While a number of different chemical detectors exist, most lack the ability to provide portable monitoring. We have developed a portable and wearable sampler that collects environmental VOCs in a person's immediate "exposure envelope" onto custom micro-preconcentrator chips for later benchtop analysis. The system also records ambient temperature and humidity and the GPS location during sampling, and the chip cartridges can be used in sequence over time to complete a profile of individual chemical exposure over the course of hours/days/weeks/months. The system can be programmed to accumulate sample for various times with varying periodicity. We first tested our sampler in the laboratory by completing calibration curves and testing saturation times for various common chemicals. The sampler was also tested in the field by collecting both indoor and outdoor personal exposure samples. Additionally under IRB approval, a teenaged volunteer wore the sampler for 5 days during which it sampled periodically throughout a 12 h period each day and the volunteer replaced the micro-preconcentrator chip each day.

Design and Benchmark Testing for Open Architecture Reconfigurable Mobile Spirometer and Exhaled Breath Monitor with GPS and Data Telemetry.

Portable and wearable medical instruments are poised to play an increasingly important role in health monitoring. Mobile spirometers are available commercially, and are used to monitor patients with advanced lung disease. However, these commercial monitors have a fixed product architecture determined by the manufacturer, and researchers cannot easily experiment with new configurations or add additional novel sensors over time. Spirometry combined with exhaled breath metabolite monitoring has the potential to transform healthcare and improve clinical management strategies. This research provides an updated design and benchmark testing for a flexible, portable, open access architecture to measure lung function, using common Arduino/Android microcontroller technologies. To demonstrate the feasibility and the proof-of-concept of this easily-adaptable platform technology, we had 43 subjects (healthy, and those with lung diseases) perform three spirometry maneuvers using our reconfigurable device and an office-based commercial spirometer. We found that our system compared favorably with the traditional spirometer, with high accuracy and agreement for forced expiratory volume in 1 s (FEV1) and forced vital capacity (FVC), and gas measurements were feasible. This provides an adaptable/reconfigurable open access "personalized medicine" platform for researchers and patients, and new chemical sensors and other modular instrumentation can extend the flexibility of the device in the future.

Modular and reconfigurable gas chromatography / differential mobility spectrometry (GC/DMS) package for detection of volatile organic compounds (VOCs).

Due to the versatility of present day microcontroller boards and open source development environments, new analytical chemistry devices can now be built outside of large industry and instead within smaller individual groups. While there are a wide range of commercial devices available for detecting and identifying volatile organic compounds (VOCs), most of these devices use their own proprietary software and complex custom electronics, making modifications or reconfiguration of the systems challenging. The development of microprocessors for general use, such as the Arduino prototyping platform, now enables custom chemical analysis instrumentation. We have created an example system using commercially available parts, centered around on differential mobility spectrometer (DMS) device. The Modular Reconfigurable Gas Chromatography - Differential Mobility Spectrometry package (MR-GC-DMS) has swappable components allowing it to be quickly reconfigured for specific application purposes as well as broad, generic use. The MR-GC-DMS has a custom user-friendly graphical user interface (GUI) and precisely tuned proportional-integral-derivative controller (PID) feedback control system managing individual temperature-sensitive components. Accurate temperature control programmed into the microcontroller greatly increases repeatability and system performance. Together, this open-source platform enables researchers to quickly combine DMS devices in customized configurations for new chemical sensing applications.

An Easy to Manufacture Micro Gas Preconcentrator for Chemical Sensing Applications.

We have developed a simple-to-manufacture microfabricated gas preconcentrator for MEMS-based chemical sensing applications. Cavities and microfluidic channels were created using a wet etch process with hydrofluoric acid, portions of which can be performed outside of a cleanroom, instead of the more common deep reactive ion etch process. The integrated heater and resistance temperature detectors (RTDs) were created with a photolithography-free technique enabled by laser etching. With only 28 V DC (0.1 A), a maximum heating rate of 17.6 °C/s was observed. Adsorption and desorption flow parameters were optimized to be 90 SCCM and 25 SCCM, respectively, for a multicomponent gas mixture. Under testing conditions using Tenax TA sorbent, the device was capable of measuring analytes down to 22 ppb with only a 2 min sample loading time using a gas chromatograph with a flame ionization detector. Two separate devices were compared by measuring the same chemical mixture; both devices yielded similar peak areas and widths (fwhm: 0.032-0.033 min), suggesting reproducibility between devices.