Topological defects in polycrystalline hexosomes from ß-cyclodextrin fatty esters.

Colloidal nanoparticles were prepared by aqueous self-assembly of amphiphilic ß-cyclodextrins (ßCDs) acylated on their secondary face with C14 chains to a total degree of substitution of 7.0, via a thermolysin-catalyzed transesterification process. The small-angle X-ray scattering pattern of the nanoparticles was consistent with a reverse hexagonal organization. Cryo-transmission electron microscopy images revealed particles with spectacular tortuous shapes and consisting of misoriented domains with a regular columnar hexagonal structure, separated by sharp interfaces. Edge dislocations as well as a variety of stepped tilt grain boundaries (GBs) composed of symmetrical and asymmetrical sections, together with one twist GB, were identified from axial views of the columnar organization. The tilt GB structure was analyzed using the concepts of coincidence site lattice and structural units developed to describe the atomic structure of interfaces in various types of polycrystals. The tilt GBs were described using sequences of ßCD-C14 columns that differed by the number of neighboring columns (5, 6 or 7) and exhibiting distinctive contrasts. To our knowledge, this is the first time that these types of topological defects are described at the nanometric scale by direct observation of colloidal polycrystalline hexosomes of self-organized amphiphiles.

Inline Coupling of Electrokinetic Preconcentration Method to Taylor Dispersion Analysis for Size-Based Characterization of Low-UV-Absorbing Nanoparticles.

The inline coupling of the field-amplified sample injection (FASI) to Taylor dispersion analysis (TDA) was used to characterize low-UV absorbing carboxylated silica nanoparticles (cNPs). The hydrodynamic diameters (Dh) were measured by using a commercial capillary electrophoresis instrument. The proposed methodology did not require any complicated instruments or chromophoric dye to increase the detection sensitivity. A practical method based on a half-Gaussian fitting was proposed for the data processing. The results obtained by this method were compared with those derived from dynamic light scattering (DLS) and transmission electron microscopy (TEM) analyses. From these results, it appeared that the size derived by TDA is in excellent agreement with those measured by DLS and TEM, as demonstrated by stable nanoparticles with narrow size distributions. Intermediate precision relative standard deviations less than 5% were obtained by FASI-TDA. The effect of the FASI-induced cNP peak dispersion on the reliability of the results was discussed in detail.

Self-Assembly of Amphiphilic Biotransesterified ß-Cyclodextrins: Supramolecular Structure of Nanoparticles and Surface Properties.

A series of ß-cyclodextrin (ßCD) amphiphilic derivatives with varying degrees of substitution were prepared by acylating ßCDs on their secondary face using thermolysin to catalyze the transesterification. After dissolution in acetone, the ßCD-Cn derivatives (n = 8, 10, 12, 14) were nanoprecipitated in water, where they self-organized into structured particles that were characterized using cryo-transmission electron microscopy (cryo-TEM) images and small-angle X-ray scattering (SAXS) data. Two types of morphologies and ultrastructures were observed depending on the total degree of substitution (TDS) of the parent derivative. The molecules with TDS < 5 formed nanospheres with a multilamellar organization, whereas those with TDS > 5 self-assembled into barrel-like (n = 8, 10, 12) or more tortuous (n = 14) particles with a columnar inverse hexagonal structure. In particular, faceted ßCD-C14 particles (TDS = 7) appeared to be composed of several domains with different orientations that were separated by sharp interfaces. Ultrastructural models were proposed on the basis of cryo-TEM images and the analysis of the contrast distribution in different projections of the lattice. Complementary compression isotherm experiments carried out at the air-water interface also suggested that differences in the molecular conformation of the series of derivatives existed depending on whether TDS was lower or higher than 5.

Mesoporous self-assembled nanoparticles of biotransesterified cyclodextrins and nonlamellar lipids as carriers of water-insoluble substances.

Soft mesoporous hierarchically structured particles were created by the self-assembly of an amphiphilic deep cavitand cyclodextrin ßCD-nC10 (degree of substitution n = 7.3), with a nanocavity grafted by multiple alkyl (C10) chains on the secondary face of the ßCD macrocycle through enzymatic biotransesterification, and the nonlamellar lipid monoolein (MO). The effect of the non-ionic dispersing agent polysorbate 80 (P80) on the liquid crystalline organization of the nanocarriers and their stability was studied in the context of vesicle-to-cubosome transition. The coexistence of small vesicular and nanosponge membrane objects with bigger nanoparticles with inner multicompartment cubic lattice structures was established as a typical feature of the employed dispersion process. The cryogenic transmission electron microscopy (cryo-TEM) images and small-angle X-ray scattering (SAXS) structural analyses revealed the dependence of the internal organization of the self-assembled nanoparticles on the presence of embedded ßCD-nC10 deep cavitands in the lipid bilayers. The obtained results indicated that the incorporated amphiphilic ßCD-nC10 building blocks stabilize the cubic lattice packing in the lipid membrane particles, which displayed structural features beyond the traditional CD nanosponges. UV-Vis spectroscopy was employed to characterize the nanoencapsulation of a model hydrophobic dimethylphenylazo-naphthol guest compound (Oil red) in the created nanocarriers. In perspective, these dual porosity carriers should be suitable for co-encapsulation and sustained delivery of peptide, protein or siRNA biopharmaceuticals together with small molecular weight drug compounds or imaging agents.

Physicochemical characterization of α-, ß-, and γ-cyclodextrins bioesterified with decanoate chains used as building blocks of colloidal nanoparticles.

Nanoparticles of amphiphilic α-, ß-, and γ-cyclodextrins were obtained by formulation of cyclodextrins enzymatically transesterified with vinyl decanoate. The product of this synthesis is a mixture of bioesterified cyclodextrins with various degrees of substitution (DS) presenting for a same DS different regio-isomers. In a first step, the efficiency of a MALDI-TOF procedure to characterize the average molecular weight of the derivative bulk mixture was demonstrated by comparing the results with those obtained from complementary NMR and HPLC techniques. In a second step, the ultrastructure of nanoparticles prepared from three different batches of synthesis was investigated and correlated with the average molecular weight and DS of the parent derivative.

Recent Advances in the Design of Topical Ophthalmic Delivery Systems in the Treatment of Ocular Surface Inflammation and Their Biopharmaceutical Evaluation.

Ocular inflammation is one of the most common symptom of eye disorders and diseases. The therapeutic management of this inflammation must be rapid and effective in order to avoid deleterious effects for the eye and the vision. Steroidal (SAID) and non-steroidal (NSAID) anti-inflammatory drugs and immunosuppressive agents have been shown to be effective in treating inflammation of the ocular surface of the eye by topical administration. However, it is well established that the anatomical and physiological ocular barriers are limiting factors for drug penetration. In addition, such drugs are generally characterized by a very low aqueous solubility, resulting in low bioavailability as only 1% to 5% of the applied drug permeates the cornea. The present review gives an updated insight on the conventional formulations used in the treatment of ocular inflammation, i.e., ointments, eye drops, solutions, suspensions, gels, and emulsions, based on the commercial products available on the US, European, and French markets. Additionally, sophisticated formulations and innovative ocular drug delivery systems will be discussed. Promising results are presented with micro- and nanoparticulated systems, or combined strategies with polymers and colloidal systems, which offer a synergy in bioavailability and sustained release. Finally, different tools allowing the physical characterization of all these delivery systems, as well as in vitro, ex vivo, and in vivo evaluations, will be considered with regards to the safety, the tolerance, and the efficiency of the drug products.

Pharmacokinetic study of intravenously administered artemisinin-loaded surface-decorated amphiphilic γ-cyclodextrin nanoparticles.

Artemisinin and its derivatives are currently recommended by World Health Organization for the treatment of malaria. Severe malaria requires a parenteral administration of artemisinin-based formulations. However, the effective use of artemisinin is limited by the pharmacokinetic characteristics of the drug (low water solubility, poor bioavailability and short half-life). To overcome some of these drawbacks, artemisinin-loaded surface-decorated nanoparticles were prepared by co-nanoprecipitation of γ-cyclodextrin bioesterified with C10 alkyl chains and polyethylene glycol (PEG) derivatives (polysorbate 80 and DMPE-mPEG2000). Using a single dose (1.5 mg kg-1 or 2 mg kg-1) by intravenous administration, we investigated the in vivo pharmacokinetic properties in healthy rats of two types of artemisinin-loaded nanoparticle formulations, namely, nanosphere and nanoreservoir systems versus an ethanolic-aqueous solution of artemisinin as reference. Significantly enhanced pharmacokinetic parameters were obtained with artemisinin-loaded nanoparticles. In comparison to reference formulation, the geometric mean exposures in plasma (AUC0-t) exhibited 2.35 and 3.26-fold increases when artemisinin was loaded in nanoreservoir and nanosphere systems, respectively. Its plasma half-life increased 4.00 and 6.25-fold and its clearance decreased up to 2.5 and 4.72-fold. Artemisinin was successfully administered intravenously by means of surface-decorated amphiphilic γ-cyclodextrin nanostructures and showed a longer elimination half-life with respect to an artemisinin solution in ethanol. Therefore, these systems are likely to provide significant advantages for the intravenous treatment of severe malaria.

Biopharmaceutical Assessment of Dexamethasone Acetate-Based Hydrogels Combining Hydroxypropyl Cyclodextrins and Polysaccharides for Ocular Delivery.

We previously developed two optimized formulations of dexamethasone acetate (DXMa) hydrogels by means of special cubic mixture designs for topical ocular administration. These gels were elaborated with hydroxypropyl-ß-CD (HPßCD) and hydroxypropyl-γ-CD (HPγCD) and commercial hydrogels in order to enhance DXMa water solubility and finally DXMa's ocular bioavailability and transcorneal penetration. The main objective of this study was to characterize them and to evaluate in vitro, ex vivo, and in vivo their safety, biopermanence, and transcorneal permeation. Gels A and B are Newtonian fluids and display a viscosity of 13.2 mPa.s and 18.6 mPa.s, respectively, which increases their ocular retention, according to the in vivo biopermanence study by PET/CT. These hydrogels could act as corneal absorption promoters as they allow a higher transcorneal permeation of DXMa through porcine excised cornea, compared to DEXAFREE® and MAXIDEX®. Cytotoxicity assays showed no cytotoxic effects on human primary corneal epithelial cells (HCE). Furthermore, Gel B is clearly safe for the eye, but the effect of Gel A on the human eye cannot be predicted. Both gels were also stable 12 months at 25 °C after sterilization by filtration. These results demonstrate that the developed formulations present a high potential for the topical ocular administration of dexamethasone acetate.

Capillary electrophoretic apparatus for the endpoint detection in microtitration methods.

Titration methods are routinely used in the laboratories for the quantification of acids and bases, for the complexometric determination of metal ions and for the ion-pair titrations of drugs in pharmaceutical control. They also find application in a wide variety of chemical and biochemical studies. However, conventional titration methods (CTM) require large amounts of samples that are not always available. In absence of micro-titrator devices, the application of these methods for expensive samples and for small batch sizes is not possible. In this work, it was demonstrated that the commercial capillary electrophoretic apparatus (CEa) can be used, in a quick and easy way, for the end-point detection in a microtitration process. The proposed methodology exploits the change of the solutions conductivity during the titrations. The equivalent points can be easily located by plotting the change in electrical current as a function of the titrant volume added. More interestingly, only 1.1-1.5 mL of analyte solutions are required to establish the titration curves. The advantages and the limitations of the procedure are discussed in detail.

Antimitotic and antiproliferative activities of chalcones: forward structure-activity relationship.

A series of 59 chalcones was prepared and evaluated for the antimitotic effect against K562 leukemia cells. The most active chalcones were evaluated for their antiproliferative activity against a panel of 11 human and murine cell cancer lines. We found that three chalcones were of great interest as potential antimitotic drugs. In vivo safety studies conducted on one of the most active chalcones revealed that the compound was safe, allowing further in vivo antitumor evaluation.

Investigation of Combined Cyclodextrin and Hydrogel Formulation for Ocular Delivery of Dexamethasone Acetate by Means of Experimental Designs.

Dexamethasone acetate (DXMa) has proven its efficiency to treat corneal inflammation, without a great propensity to increase intraocular pressure. Unfortunately, its poor aqueous solubility, associated with a rapid precorneal elimination, results in a low drug bioavailability and a low penetration after topical ocular administration. The main objective of this study was to improve the apparent aqueous solubility of DXMa using cyclodextrins. First, hydroxypropyl-ß-CD (HPßCD) and hydroxypropyl-γ-CD (HPγCD) were used to enhance DXMa concentration in aqueous solution. The ß and γ HPCD derivatives allowed the increase of the DXMa amount in solution at 25 °C by a factor of 500 and 1500, respectively. Second, with the aim of improving the persistence of the complex solution after instillation in the eye, the formulations of DXMa-based CD solutions with marketed ophthalmic gels (CELLUVISC®, GEL-LARMES®, and VISMED®) were investigated and optimized by means of special cubic mixture designs, allowing the defining of mixed gels loaded with 0.7% (HPßCD) and 2% (HPγCD) DXMa with osmolality within acceptable physiological range. Finally, in vitro drug release assays from the mixed gels were performed and compared with reference eye drops. Similarly to MAXIDEX® and DEXAFREE®, in the case of mixed gel containing HPßCD, more than 90% of the drug was released within 2 h, while in mixed gel containing HPγCD, the release of DXMa was partial, reaching ≈60% in 2 h. This difference will have to be further addressed with ex vivo and in vivo ocular delivery experiments.

New nanoparticles obtained by co-assembly of amphiphilic cyclodextrins and nonlamellar single-chain lipids: Preparation and characterization.

This work aimed at preparing new nanoscale assemblies based on an amphiphilic bio-esterified ß-cyclodextrin (ß-CD), substituted at the secondary face with n-decanoic fatty acid chains (ß-CD-C10), and monoolein (MO) as new carriers for parenteral drug delivery. Stable binary (ß-CD-C10/MO) and ternary (ß-CD-C10/MO/stabilizer) nanoscale assemblies close to 100nm in size were successfully prepared in water by the solvent displacement method. The generated nanoparticles were fully characterized by dynamic light scattering, transmission electron microscopy, small-angle X-ray scattering, residual solvent analysis, complement activation and the contribution of each formulation parameter was determined by principal component analysis. The ß-CD-C10 units were shown to self-organize into nanoparticles with a hexagonal supramolecular packing that was significantly modulated by the molar ratio of the constituents and the presence of a steric or electrostatic stabilizer (DOPE-PEG2000 or DOPA/POPA, respectively). Indeed, nanoparticles differing in morphology and in hexagonal lattice parameters were obtained while the co-existence of multiple mesophases was observed in some formulations, in particular for the ß-CD-C10/MO/DOPA and ß-CD-C10/MO/POPA systems. The mixed ß-CD-C10/MO/DOPE-PEG2000 nanoparticles (49:49:2 in mol%) appeared to be the most suitable for use as a drug delivery system since they contained a very low amount of residual solvent and showed a low level of complement C3 activation.

Conformational states and thermodynamics of alpha-lactalbumin bound to membranes: a case study of the effects of pH, calcium, lipid membrane curvature and charge.

The study of the conformational changes of bovine alpha-lactalbumin, switching from soluble states to membrane-bound states, deepens our knowledge of the behaviour of amphitropic proteins. The binding and the membrane-bound conformations of alpha-lactalbumin are highly sensitive to environmental factors, like calcium and proton concentrations, curvature and charge of the lipid membrane. The interactions between the protein and the membrane result from a combination of hydrophobic and electrostatic interactions and the respective weights of these interactions depend on the physicochemical conditions. As inferred by macroscopic as well as residue-level methods, the conformations of the membrane-bound protein range from native-like to molten globule-like states. However, the regions anchoring the protein to the membrane are similar and restricted to amphiphilic alpha-helices. H/(2)H-exchange experiments also yield residue-level data that constitute comprehensive information providing a new point of view on the thermodynamics of the interactions between the protein and the membrane.

Biocompatible Double-Membrane Hydrogels from Cationic Cellulose Nanocrystals and Anionic Alginate as Complexing Drugs Codelivery.

A biocompatible hydrogel with a double-membrane structure is developed from cationic cellulose nanocrystals (CNC) and anionic alginate. The architecture of the double-membrane hydrogel involves an external membrane composed of neat alginate, and an internal composite hydrogel consolidates by electrostatic interactions between cationic CNC and anionic alginate. The thickness of the outer layer can be regulated by the adsorption duration of neat alginate, and the shape of the inner layer can directly determine the morphology and dimensions of the double-membrane hydrogel (microsphere, capsule, and filmlike shapes). Two drugs are introduced into the different membranes of the hydrogel, which will ensure the complexing drugs codelivery and the varied drugs release behaviors from two membranes (rapid drug release of the outer hydrogel, and prolonged drug release of the inner hydrogel). The double-membrane hydrogel containing the chemically modified cellulose nanocrystals (CCNC) in the inner membrane hydrogel can provide the sustained drug release ascribed to the "nano-obstruction effect" and "nanolocking effect" induced by the presence of CCNC components in the hydrogels. Derived from natural polysaccharides (cellulose and alginate), the novel double-membrane structure hydrogel material developed in this study is biocompatible and can realize the complexing drugs release with the first quick release of one drug and the successively slow release of another drug, which is expected to achieve the synergistic release effects or potentially provide the solution to drug resistance in biomedical application.

Efficient size control of amphiphilic cyclodextrin nanoparticles through a statistical mixture design methodology.

PURPOSE: the aim of the study was to investigate size control of amphiphilic beta-cyclodextrin nanoparticles obtained by solvent displacement technique. METHODS: An experimental design methodology for mixture design was undertaken using D-optimal approach with the following technique variables: water fraction X1 (40-70% v/v), acetone fraction X2 (0-60% v/v) and ethanol fraction X3 (0-60% v/v). RESULTS: The resulting quadratic model obtained after logarithmic transformation of data and partial least-square regression was statistically validated and experimentally checked. Also, the morphology of the colloidal nanoparticles from selected experiments was observed by cryo-transmission electron microscopy. CONCLUSIONS: This experimental design approach allowed to produce interesting amphiphilic beta-cyclodextrin nanoparticles with a predicted mean size varying from 60 to 400 nm.

Influence of chemical structure of amphiphilic beta-cyclodextrins on their ability to form stable nanoparticles.

The aim of the study was to establish a correlation between the chemical structure of amphiphilic beta-cyclodextrins (beta-CDa) and their ability to form stable nanospheres. Amphiphilic derivatives were obtained according to an optimized well-known three-step synthesis. The selective acylation of the secondary face of beta-CD being well controlled, several beta-CDa presenting different substitution degree were synthesized. The self-organization properties of the derivatives were evaluated. The peracylated beta-CD, i.e. bearing 14 alkyl chains on the secondary hydroxyl groups, does not yield stable nanosphere suspension, even in the presence of a non ionic surfactant in the aqueous phase. However, the presence of partially acylated derivatives within the beta-CDa allows self-assembly into stable nanosphere suspension.

Chromatographic determination of the association constants between nimesulide and native and modified beta-cyclodextrins.

The retention of a non-steroidal anti-inflammatory drug (NSAID), i.e. nimesulide, in high performance liquid chromatography (HPLC) was investigated using a phenyl bond silica column and beta-cyclodextrin (beta-CD) or hydroxypropyl-beta-cyclodextrin (HP-beta-CD) as mobile phase additive (0-10 mM). Such a study was carried out in order to determine the most efficient cyclodextrin as a potential drug complexing agent for a future application in pharmaceutical formulation. Assuming a 1:1 stoichiometry, the association constants (K) were calculated from the chromatographic data. At a column temperature of 25 degrees C and in a highly aqueous medium (98% phosphate buffer-2% methanol (v/v)), K was equal to 523 and 1285 M(-1) for the nimesulide-beta-CD and nimesulide HP-beta-CD complexes, respectively. These results were consistent with the data reported previously using phase solubility studies and UV spectrophotometry. As well, the thermodynamic parameters of the inclusion complexes were determined from linear van't Hoff plots for the two inclusion complexes. From the enthalpy and entropy changes, it appeared that nimesulide interact more strongly with HP-beta-CD due to a significant hydrophobic effect between the compound and the flexible hydroxypropyl groups.

Progress in developing amphiphilic cyclodextrin-based nanodevices for drug delivery.

Nowadays, colloidal drug carriers represent an alternative to solve drug bioavailabily problems. During the past two decades, colloidal drug carriers have proved to improve the therapeutic index of drugs and thus increase their efficacy and/or reduce their toxicity. However, the major challenge in the development of these drug carriers remains the search for materials able to self-organize into stable nanoscale systems. In particular, amphiphilic α-, ß- and γ-cyclodextrins (CDs), grafted on their secondary or primary side with different aliphatic chains, have been investigated as drug delivery vehicles due to their ability to self-assemble and form various stable colloidal systems such as micellar aggregates, nanoreservoirs or nanoparticles exhibiting a matricial, multilamellar or hexagonal supramolecular organization. These self-assembled CD-based nanodevices show some advantages in terms of stability, good ability to associate lipophilic drugs and good in vivo tolerance. This review focuses on the potential of the structured nanoparticles obtained from nonionic amphiphilic CDs in drug delivery and targeting. We discuss the synthesis and characterization of the building blocks as well as the preparation and characterization of colloidal particles made from these materials. We also considered some pharmaceutical applications and identified opportunities for an optimum use of this CD-based nanotechnology approach in addressing worldwide priority health problems.

Quantitative evaluation of the combination between cytotoxic drug and efflux transporter inhibitors based on a tumour growth inhibition model.

ATP-Binding Cassette transporters such as ABCG2 confer resistance to various anticancer drugs including irinotecan and its active metabolite, SN38. Early quantitative evaluation of efflux transporter inhibitors-cytotoxic combination requires quantitative drug-disease models. A proof-of-concept study has been carried out for studying the effect of a new ABCG2 transporter inhibitor, MBLI87 combined to irinotecan in mice xenografted with cells overexpressing ABCG2. Mice were treated with irinotecan alone or combined to MBLI87, and tumour size was periodically measured. To model those data, a tumour growth inhibition model was developed. Unperturbed tumour growth was modelled using Simeoni's model. Drug effect kinetics was accounted for by a Kinetic-Pharmacodynamic approach. Effect of inhibitor was described with a pharmacodynamic interaction model where inhibitor enhances activity of cytotoxic. This model correctly predicted tumour growth dynamics from our study. MBLI87 increased irinotecan potency by 20% per µmol of MBLI87. This model retains enough complexity to simultaneously describe tumour growth and effect of this type of drug combination. It can thus be used as a template to early evaluate efflux transporter inhibitors in-vivo.

Self-assembled biotransesterified cyclodextrins as potential Artemisinin nanocarriers. II: In vitro behavior toward the immune system and in vivo biodistribution assessment of unloaded nanoparticles.

In a previous study, we reported on the formulation of Artemisinin-loaded surface-decorated nanoparticles (nanospheres and nanoreservoirs) by co-nanoprecipitation of PEG derivatives (PEG1500 and PEG4000-stearate, polysorbate 80) and biosynthesized γ-CD fatty esters. In the present study, the co-nanoprecipitation was extended to the use of a PEGylated phospholipid, namely DMPE-PEG2000. As our goal was to prepare long-circulating nanocarriers for further systemic delivery of Artemisinin (ART), here, we have investigated, on the one hand, the in vitro behavior of these surface-modified γ-CD-C10 particles toward the immune system (complement activation and macrophage uptake assays) and, on the other hand, their biodistribution features in mice. These experiments showed that the in vitro plasma protein adsorption and phagocytosis by macrophage cells triggered by γ-CD-C10 nanoparticles were significantly reduced when their surface was decorated with amphiphilic PEGylated molecules, in particular PEG1500-stearate, DMPE-mPEG2000 or polysorbate 80. The prolonged blood circulation time assessed by fluorescence imaging was demonstrated for unloaded γ-CD-C10-based nanospheres and nanoreservoir particles containing DMPE-PEG2000 and polysorbate80, respectively. These nanoparticles also proved to be non-hemolytic at the concentration range used in vivo. Within the limits of the conducted experiments, the co-nanoprecipitation technique may be considered as an alternative for surface modification of amphiphilic CD-based drug delivery systems and may be applied to the systemic delivery of ART.