Mesoporous alumina from colloidal biotemplating of Al clusters.

A simple and green synthesis route was disclosed for the achievement of mesoporous alumina microparticles employing polysaccharide nanoparticles (α-chitin nanorods) as templates. Pore textures can be tuned by the cationic alumina precursor. Compared to small cations, the use of Al13 and Al30 oxo-hydroxo clusters leads to better defined and elongated mesopores. Electron microscopy and spectroscopic ((13) C, (27) Al NMR, XPS) measurements demonstrated that this is related to the effective coating of α-chitin nanorods by these pre-condensed colloids.

Drug-Polymer Electrostatic Complexes as New Structuring Agents for the Formation of Drug-Loaded Ordered Mesoporous Silica.

Using aminoglycoside antibiotics as drug models, it was shown that electrostatic complexes between hydrophilic drugs and oppositely charged double-hydrophilic block copolymers can form ordered mesophases. This phase behavior was evidenced by using poly(acrylic acid)-block-poly(ethylene oxide) block copolymers in the presence of silica precursors, and this allowed preparing drug-loaded mesoporous silica directly from the drug-polymer complexes. The novel synthetic strategy of the hybrid materials is highly efficient, avoiding waste and multistep processes; it also ensures optimal drug loading and provides pH-dependence of the drug release from the materials.

Highly stable layered double hydroxide colloids: a direct aqueous synthesis route from hybrid polyion complex micelles.

Aqueous suspensions of highly stable Mg/Al layered double hydroxide (LDH) nanoparticles were obtained via a direct and fully colloidal route using asymmetric poly(acrylic acid)-b-poly(acrylamide) (PAA-b-PAM) double hydrophilic block copolymers (DHBCs) as growth and stabilizing agents. We showed that hybrid polyion complex (HPIC) micelles constituted of almost only Al(3+) were first formed when mixing solutions of Mg(2+) and Al(3+) cations and PAA3000-b-PAM10000 due to the preferential complexation of the trivalent cations. Then mineralization performed by progressive hydroxylation with NaOH transformed the simple DHBC/Al(3+) HPIC micelles into DHBC/aluminum hydroxide colloids, in which Mg(2+) ions were progressively introduced upon further hydroxylation leading to the Mg-Al LDH phase. The whole process of LDH formation occurred then within the confined environment of the aqueous complex colloids. The hydrodynamic diameter of the DHBC/LDH colloids could be controlled: it decreased from 530 nm down to 60 nm when the metal complexing ratio R (R = AA/(Mg + Al)) increased from 0.27 to 1. This was accompanied by a decrease of the average size of individual LDH particles as R increased (for example from 35 nm at R = 0.27 down to 17 nm at R = 0.33), together with a progressive favored intercalation of polyacrylate rather than chloride ions in the interlayer space of the LDH phase. The DHBC/LDH colloids have interesting properties for biomedical applications, that is, high colloidal stability as a function of time, stability in phosphate buffered saline solution, as well as the required size distribution for sterilization by filtration. Therefore, they could be used as colloidal drug delivery systems, especially for hydrosoluble negatively charged drugs.

Ecodesign of ordered mesoporous silica materials.

Characterized by a regular porosity in terms of pore size and pore network arrangement, ordered mesoporous solids have attracted increasing interest in the last two decades. These materials have been identified as potential candidates for several applications. However, more environmentally friendly and economical synthesis routes of mesoporous silica materials were found to be necessary in order to develop these applications on an industrial scale. Consequently, ecodesign of ordered mesoporous silica has been considerably developed with the objective of optimizing the chemistry and the processing aspects of the material synthesis. In this review, the main strategies developed with this aim are presented and discussed.

Molecular simulation of adsorption and transport in hierarchical porous materials.

Adsorption and transport in hierarchical porous solids with micro- (~1 nm) and mesoporosities (>2 nm) are investigated by molecular simulation. Two models of hierarchical solids are considered: microporous materials in which mesopores are carved out (model A) and mesoporous materials in which microporous nanoparticles are inserted (model B). Adsorption isotherms for model A can be described as a linear combination of the adsorption isotherms for pure mesoporous and microporous solids. In contrast, adsorption in model B departs from adsorption in pure microporous and mesoporous solids; the inserted microporous particles act as defects, which help nucleate the liquid phase within the mesopore and shift capillary condensation toward lower pressures. As far as transport under a pressure gradient is concerned, the flux in hierarchical materials consisting of microporous solids in which mesopores are carved out obeys the Navier-Stokes equation so that Darcy's law is verified within the mesopore. Moreover, the flow in such materials is larger than in a single mesopore, due to the transfer between micropores and mesopores. This nonzero velocity at the mesopore surface implies that transport in such hierarchical materials involves slippage at the mesopore surface, although the adsorbate has a strong affinity for the surface. In contrast to model A, flux in model B is smaller than in a single mesopore, as the nanoparticles act as constrictions that hinder transport. By a subtle effect arising from fast transport in the mesopores, the presence of mesopores increases the number of molecules in the microporosity in hierarchical materials and, hence, decreases the flow in the micropores (due to mass conservation). As a result, we do not observe faster diffusion in the micropores of hierarchical materials upon flow but slower diffusion, which increases the contact time between the adsorbate and the surface of the microporosity.

Hybrid polyion complex micelles formed from double hydrophilic block copolymers and multivalent metal ions: size control and nanostructure.

Hybrid polyion complex (HPIC) micelles are nanoaggregates obtained by complexation of multivalent metal ions by double hydrophilic block copolymers (DHBC). Solutions of DHBC such as the poly(acrylic acid)-block-poly(acrylamide) (PAA-b-PAM) or poly(acrylic acid)-block-poly(2-hydroxyethylacrylate) (PAA-b-PHEA), constituted of an ionizable complexing block and a neutral stabilizing block, were mixed with solutions of metal ions, which are either monoatomic ions or metal polycations, such as Al(3+), La(3+), or Al(13)(7+). The physicochemical properties of the HPIC micelles were investigated by small angle neutron scattering (SANS) and dynamic light scattering (DLS) as a function of the polymer block lengths and the nature of the cation. Mixtures of metal cations and asymmetric block copolymers with a complexing block smaller than the stabilizing block lead to the formation of stable colloidal HPIC micelles. The hydrodynamic radius of the HPIC micelles varies with the polymer molecular weight as M(0.6). In addition, the variation of R(h) of the HPIC micelle is stronger when the complexing block length is increased than when the neutral block length is increased. R(h) is highly sensitive to the polymer asymmetry degree (block weight ratio), and this is even more true when the polymer asymmetry degree goes down to values close to 3. SANS experiments reveal that HPIC micelles exhibit a well-defined core-corona nanostructure; the core is formed by the insoluble dense poly(acrylate)/metal cation complex, and the diffuse corona is constituted of swollen neutral polymer chains. The scattering curves were modeled by an analytical function of the form factor; the fitting parameters of the Pedersen's model provide information on the core size, the corona thickness, and the aggregation number of the micelles. For a given metal ion, the micelle core radius increases as the PAA block length. The radius of gyration of the micelle is very close to the value of the core radius, while it varies very weakly with the neutral block length. Nevertheless, the radius of gyration of the micelle is highly dependent on the asymmetry degree of the polymer: if the neutral block length increases in a large extent, the micelle radius of gyration decreases due to a decrease of the micelle aggregation number. The variation of the R(g)/R(h) ratio as a function of the polymer block lengths confirms the nanostructure associating a dense spherical core and a diffuse corona. Finally, the high stability of HPIC micelles with increasing concentration is the result of the nature of the coordination complex bonds in the micelle core.

Autofluorescence-Free In Vivo Imaging Using Polymer-Stabilized Nd3+-Doped YAG Nanocrystals.

Neodymium-doped yttrium aluminum garnet (YAG:Nd3+) has been widely developed during roughly the past 60 years and has been an outstanding fluorescent material. It has been considered as the gold standard among multipurpose solid-state lasers. Yet, the successful downsizing of this system into the nanoregimen has been elusive, so far. Indeed, the synthesis of a garnet structure at the nanoscale, with enough crystalline quality for optical applications, was found to be quite challenging. Here, we present an improved solvothermal synthesis method producing YAG:Nd3+ nanocrystals of remarkably good structural quality. Adequate surface functionalization using asymmetric double-hydrophilic block copolymers, constituted of a metal-binding block and a neutral water-soluble block, provides stabilized YAG:Nd3+ nanocrystals with long-term colloidal stability in aqueous suspensions. These newly stabilized nanoprobes offer spectroscopic quality (long lifetimes, narrow emission lines, and large Stokes shifts) close to that of bulk YAG:Nd3+. The narrow emission lines of YAG:Nd3+ nanocrystals are exploited by differential infrared fluorescence imaging, thus achieving an autofluorescence-free in vivo readout. In addition, nanothermometry measurements, based on the ratiometric fluorescence of the stabilized YAG:Nd3+ nanocrystals, are demonstrated. The progress here reported paves the way for the implementation of this new stabilized YAG:Nd3+ system in the preclinical arena.

Tripartite siRNA micelles as controlled delivery systems for primary dendritic cells.

Dendritic cells (DCs) are key cells in immunology that are able to stimulate or inhibit the immune response. RNA interference has appeared of great interest to modulate the expression of immunogenic or tolerogenic molecules. In our study, pH-sensitive polyion complex micelles based on a double-hydrophilic block copolymer and poly-L-lysine were formulated to entrap a small interfering RNA (siRNA). We show that siRNA-loaded micelles were cytotolerant and efficiently endocytosed by DCs. siRNA targeting eGFP, used as model siRNA, was released into the cytosol following endocytosis of the micelles and the silencing of eGFP expression was observed in DC isolated from transgenic mice. Our results underscore the potential of pH-sensitive polyion complex micelles to formulate therapeutic siRNA for DC engineering in order to maintain the homeostasis of the immune response.

[Mesoporous silica nanoparticles for two-photon fluorescence]. / Nanoparticules de silice mésoporeuse optimisées pour la fluorescence à deux photons.

Mesoporous silica nanoparticles have unique properties: a specific large surface or a narrow casting of the sizes of pores. The perspectives of use are the creation of new tools for the premature diagnosis. For these potential biological applications, the harmlessness of these nanoparticles must be established.

pH-mediated control over the mesostructure of ordered mesoporous materials templated by polyion complex micelles.

Ordered mesoporous silica materials were prepared under different pH conditions by using a silicon alkoxide as a silica source and polyion complex (PIC) micelles as the structure-directing agents. PIC micelles were formed by complexation between a weak polyacid-containing double-hydrophilic block copolymer, poly(ethylene oxide)-b-poly(acrylic acid) (PEO-b-PAA), and a weak polybase, oligochitosan-type polyamine. As both the micellization process and the rate of silica condensation are highly dependent on pH, the properties of silica mesostructures can be modulated by changing the pH of the reaction medium. Varying the materials synthesis pH from 4.5 to 7.9 led to 2D-hexagonal, wormlike or lamellar mesostructures, with a varying degree of order. The chemical composition of the as-synthesized hybrid organic/inorganic materials was also found to vary with pH. The structure variations were discussed based on the extent of electrostatic complexing bonds between acrylate and amino functions and on the silica condensation rate as a function of pH.

Large-Pore Periodic Mesoporous Organosilicas as Advanced Bactericide Platforms.

Despite the versatility of periodic mesoporous organosilicas (PMOs), the bactericide capacity of these hybrid platforms has seldom been explored. Herein, we describe the synthesis of large-pore phenylene-bridged PMOs, mesostructured by polyion complex (PIC) micelles (PICPMOs) incorporating an antibiotic, neomycin B. A key feature of this approach is that the bioactive molecules are directly encapsulated within the PICPMOs during their formation. The engineered PICPMOs exhibit a well-ordered hexagonal mesophase with a molecular-scale crystallinity and large mesopores (8 nm), which facilitates pH-triggered delivery of the drug. The results obtained with a pathogenic Escherichia coli strain clearly demonstrate the potential of such PICPMOs for antibacterial applications.

Polymeric micelles based on poly(methacrylic acid) block-containing copolymers with different membrane destabilizing properties for cellular drug delivery.

Poly(methacrylic acid)-b-poly(ethylene oxide) are double hydrophilic block copolymers, which are able to form micelles by complexation with a counter-polycation, such as poly-l-lysine. A study was carried out on the ability of the copolymers to interact with model membranes as a function of their molecular weights and as a function of pH. Different behaviors were observed: high molecular weight copolymers respect the membrane integrity, whereas low molecular weight copolymers with a well-chosen asymmetry degree can induce a membrane alteration. Hence by choosing the appropriate molecular weight, micelles with distinct membrane interaction behaviors can be obtained leading to different intracellular traffics with or without endosomal escape, making them interesting tools for cell engineering. Especially micelles constituted of low molecular weight copolymers could exhibit the endosomal escape property, which opens vast therapeutic applications. Moreover micelles possess a homogeneous nanometric size and show variable properties of disassembly at acidic pH, of stability in physiological conditions, and finally of cyto-tolerance.

Development of tripartite polyion micelles for efficient peptide delivery into dendritic cells without altering their plasticity.

For many years, a great deal of interest has been focusing on the optimization of peptide presentation by dendritic cells (DCs) using peptide-encapsulated particles, in order to enhance the immune response. Nowadays, DCs are also known to be involved in peripheral tolerance, inducing anergy or regulatory T lymphocytes. To preserve the plasticity of DCs, we formulated non-cytotoxic pH-sensitive polyion complex micelles based on an original tripartite association of polymethacrylic acid-b-polyethylene oxide, poly-L-lysine and fluorescent-peptide: OVAFITC peptide, as a model drug. We demonstrated that the OVAFITC peptide was successfully entrapped into the micelles, released into DC endosomes thanks to the pH-sensitivity property of the micelles, and efficiently loaded onto MHC class II molecules. The phenotype as well as the cytokinic secretion profile of the mature and immature DCs loaded with peptide-encapsulated micelles was unaltered by the tripartite polyion micelles. The efficient loading of the peptide by immature and mature DCs was shown by the in vitro proliferation of OVA-specific transgenic T cells. Therefore, the present results show that the tripartite polyion complex micelles can be used as efficient peptide vectors immunogically inert for ex vivo DCs engineering without modifying their intrinsic immune plasticity.

Pseudomorphic synthesis of mesoporous zeolite Y crystals.

A simple method for the conception of mesoporous zeolite Y crystals with a narrow intracrystalline mesopore size distribution is reported. It involves the pseudomorphic transformation of parent zeolite crystals by recrystallisation in the presence of surfactants, and leads to two interconnected pore systems in the zeolite crystals.

pH-sensitive double-hydrophilic block copolymer micelles for biological applications.

In the recent years, double-hydrophilic block copolymer (DHBC) micelles have appeared as potential vectors for pharmaceutical applications due to their simple preparation method in aqueous solvent. The present study aims at underscoring the strategy for the choice of the partners in the formulation of DHBC micelles presenting a good stability in physiological conditions (pH 7.4, 0.15 mol/L NaCl) and a pH-sensitivity allowing their disassembly at pH 5. Using light scattering and Laser-Doppler electrophoresis, micelles of polymethacrylic acid-b-polyethylene oxide complexing either poly-l-lysine (PLL) or an oligochitosan were characterised. Whatever the polyamine counter-polyion considered, the micelles were perfectly formed for an amine/methacrylic acid molar charge ratio of one. They were characterised by a hydrodynamic diameter of 28 nm for PLL and 60 nm for oligochitosan and by a neutral zeta potential. The stability study as a function of the pH and of the ionic strength revealed different behaviours. Oligochitosan micelles were stable until pH 7 and unstable at 0.15 mol/L NaCl. On the contrary, PLL micelles were stable in physiological conditions and disassembled at pH 5. As a conclusion, the choice of the partners to formulate double-hydrophilic block copolymer based-micelles is strategic in order to obtain well-adapted vectors applied to the pharmaceutical field.

The control of dendritic cell maturation by pH-sensitive polyion complex micelles.

Double-hydrophilic block copolymer micelles were designed as vectors for ex vivo dendritic cell engineering to improve the delivery of therapeutic molecules in such immune cells. Polymethacrylic acid-b-polyethylene oxide (PMAA(2100)-b-POE(5000))/poly-L-lysine micelles were optimised and showed a hydrodynamic diameter of 30 nm with a peculiar core organised with hydrogen bonds as well as hydrophobic domains. The micelles proved high stability in physiological conditions (pH and ionic strength) and were also able to disassemble under acidic conditions mimicking acidic endolysosomes. The efficient endocytosis of the optimised micelles tested on bone marrow-derived dendritic cells was monitored by fluorescence-activated cell sorting and microscopy analysis. Finally, the micelle biocompatibility permitted a complete control of the dendritic cell-maturation process widening the therapeutical potential of such engineered dendritic cells for cancer vaccines as well as for immunomodulation in autoimmune diseases.