RESUMEN
Three dimensional (3D) bioprinting is an emerging technology that enables complex spatial modeling of cell-based tissue engineering products, whose therapeutic potential in regenerative medicine is enormous. However, its success largely depends on the definition of a bioprintable zone, which is specific for each combination of cell-loaded hydrogels (or bioinks) and scaffolds, matching the mechanical and biological characteristics of the target tissue to be repaired. Therefore proper adjustment of the bioink formulation requires a compromise between: (i) the maintenance of cellular critical quality attributes (CQA) within a defined range of specifications to cell component, and (ii) the mechanical characteristics of the printed tissue to biofabricate. Herein, we investigated the advantages of using natural hydrogel-based bioinks to preserve the most relevant CQA in bone tissue regeneration applications, particularly focusing on cell viability and osteogenic potential of multipotent mesenchymal stromal cells (MSCs) displaying tripotency in vitro, and a phenotypic profile of 99.9% CD105+ /CD45,- 10.3% HLA-DR,+ 100.0% CD90,+ and 99.2% CD73+ /CD31- expression. Remarkably, hyaluronic acid, fibrin, and gelatin allowed for optimal recovery of viable cells, while preserving MSC's proliferation capacity and osteogenic potency in vitro. This was achieved by providing a 3D structure with a compression module below 8.8 ± 0.5 kPa, given that higher values resulted in cell loss by mechanical stress. Beyond the biocompatibility of naturally occurring polymers, our results highlight the enhanced protection on CQA exerted by bioinks of natural origin (preferably HA, gelatin, and fibrin) on MSC, bone marrow during the 3D bioprinting process, reducing shear stress and offering structural support for proliferation and osteogenic differentiation.
Asunto(s)
Bioimpresión , Células Madre Mesenquimatosas , Hidrogeles/química , Osteogénesis , Gelatina/química , Ingeniería de Tejidos/métodos , Fibrina/metabolismo , Andamios del Tejido/química , Bioimpresión/métodos , Impresión TridimensionalRESUMEN
Patient-derived cancer 3D models are a promising tool that will revolutionize personalized cancer therapy but that require previous knowledge of optimal cell growth conditions and the most advantageous parameters to evaluate biomimetic relevance and monitor therapy efficacy. This study aims to establish general guidelines on 3D model characterization phenomena, focusing on neuroblastoma. We generated gelatin-based scaffolds with different stiffness and performed SK-N-BE(2) and SH-SY5Y aggressive neuroblastoma cell cultures, also performing co-cultures with mouse stromal Schwann cell line (SW10). Model characterization by digital image analysis at different time points revealed that cell proliferation, vitronectin production, and migration-related gene expression depend on growing conditions and are specific to the tumor cell line. Morphometric data show that 3D in vitro models can help generate optimal patient-derived cancer models, by creating, identifying, and choosing patterns of clinically relevant artificial microenvironments to predict patient tumor cell behavior and therapeutic responses.
Asunto(s)
Movimiento Celular , Proliferación Celular , Procesamiento de Imagen Asistido por Computador , Proteínas de Neoplasias/biosíntesis , Neuroblastoma , Biosíntesis de Proteínas , Línea Celular Tumoral , Humanos , Neuroblastoma/metabolismo , Neuroblastoma/patologíaRESUMEN
Neuroblastoma (NB) is a childhood cancer in sympathetic nervous system cells. NB exhibits cellular heterogeneity, with adrenergic and mesenchymal states displaying distinct tumorigenic potentials. NB is highly vascularized, and blood vessels can form through various mechanisms, including endothelial transdifferentiation, leading to the development of tumor-derived endothelial cells (TECs) associated with chemoresistance. We lack specific biomarkers for TECs. Therefore, identifying new TEC biomarkers is vital for effective NB therapies. A stiffness-based platform simulating human arterial and venous stiffness was developed to study NB TECs in vitro. Adrenergic cells cultured on arterial-like stiffness transdifferentiated into TECs, while mesenchymal state cells did not. The TECs derived from adrenergic cells served as a model to explore new biomarkers, with a particular focus on GB3, a glycosphingolipid receptor implicated in angiogenesis, metastasis, and drug resistance. Notably, the TECs unequivocally expressed GB3, validating its novelty as a marker. To explore targeted therapeutic interventions, nanoparticles functionalized with the non-toxic subunit B of the Shiga toxin were generated, because they demonstrated a robust affinity for GB3-positive cells. Our results demonstrate the value of the stiffness-based platform as a predictive tool for assessing NB aggressiveness, the discovery of new biomarkers, and the evaluation of the effectiveness of targeted therapeutic strategies.
RESUMEN
Protein splicing is a self-catalyzed process in which an internal protein domain (the intein) is excised from its flanking sequences, linking them together with a canonical peptide bond. Trans-inteins are separated in two different precursor polypeptide chains that must assemble to catalytically self-excise and ligate the corresponding flanking exteins to join even when expressed separately either in vitro or in vivo. They are very interesting to construct full proteins from separate domains because their common small size favors chemical synthesis approaches. Therefore, trans-inteins have multiple applications such as protein modification and purification, structural characterization of protein domains or production of intein-based biosensors, among others. For many of these applications, when using more than one trans-intein, orthogonality between them is a critical issue to ensure the proper ligation of the exteins. Here, we confirm the orthogonality (lack of cross-reactivity) of four different trans- or split inteins, gp41-1, gp41-8, IMPDH-1 and NrdJ-1 both in vivo and in vitro, and built different constructs that allow for the sequential fusion of up to four protein fragments into one final spliced product. We have characterized the splicing efficiency of these constructs. All harbor non-native extein residues at the splice junction between the trans-intein and the neighboring exteins, except for the essential Ser + 1. Our results show that it is possible to ligate four different protein domains using inteins gp41-1, IMPDH-1 and NrdJ-1 with non-native extein residues to obtain a final four-domain spliced product with a not negligible yield that keeps its native sequence.
Asunto(s)
Inteínas , Dominios Proteicos , Empalme de Proteína , Ingeniería de Proteínas/métodos , Escherichia coli/genética , Escherichia coli/metabolismoRESUMEN
Extracellular matrix hydrogels are considered one of the most suitable biomaterials for tissue regeneration due to their similarity with the extracellular microenvironment of the native tissue. Their properties are dependent on their composition, material concentration, fiber density and the fabrication approaches, among other factors. The encapsulation of immune cells in this kind of hydrogels, both in absence or presence of a pathogen, represents a promising strategy for the development of platforms that mimic healthy and infected tissues, respectively. In this work, we have encapsulated macrophages in 3D hydrogels of porcine decellularized adipose matrices (pDAMs) without and with the Candida albicans fungus, as 3D experimental models to study the macrophage immunocompetence in a closer situation to the physiological conditions and to mimic an infection scenario. Our results indicate that encapsulated macrophages preserve their functionality within these pDAM hydrogels and phagocytose live pathogens. In addition, their behavior is influenced by the hydrogel pore size, inversely related to the hydrogel concentration. Thus, larger pore size promotes the polarization of macrophages towards M2 phenotype along the time and enhances their phagocytosis capability. It is important to point out that encapsulated macrophages in absence of pathogen showed an M2 phenotype, but macrophages coencapsulated with C. albicans can switch towards an M1 inflammatory phenotype to resolve the infection, depending on the fungus quantity. The present study reveals that pDAM hydrogels preserve the macrophage plasticity, demonstrating their relevance as new models for macrophage-pathogen interaction studies that mimic an infection scenario with application in regenerative medicine research.
Asunto(s)
Candida albicans , Hidrogeles , Porcinos , Animales , Macrófagos , PirenosRESUMEN
Acquired muscle diseases such as cancer cachexia are responsible for the poor prognosis of many patients suffering from cancer. In vitro models are needed to study the underlying mechanisms of those pathologies. Extrusion bioprinting is an emerging tool to emulate the aligned architecture of fibers while implementing additive manufacturing techniques in tissue engineering. However, designing bioinks that reconcile the rheological needs of bioprinting and the biological requirements of muscle tissue is a challenging matter. Here we formulate a biomaterial with dual crosslinking to modulate the physical properties of bioprinted models. We design 3D bioprinted muscle models that resemble the mechanical properties of native tissue and show improved proliferation and high maturation of differentiated myotubes suggesting that the GelMA-AlgMA-Fibrin biomaterial possesses myogenic properties. The electrical stimulation of the 3D model confirmed the contractile capability of the tissue and enhanced the formation of sarcomeres. Regarding the functionality of the models, they served as platforms to recapitulate skeletal muscle diseases such as muscle wasting produced by cancer cachexia. The genetic expression of 3D models demonstrated a better resemblance to the muscular biopsies of cachectic mouse models. Altogether, this biomaterial is aimed to fabricate manipulable skeletal muscle in vitro models in a non-costly, fast and feasible manner.
Asunto(s)
Caquexia , Neoplasias , Ratones , Animales , Caquexia/etiología , Caquexia/metabolismo , Músculo Esquelético/metabolismo , Atrofia Muscular/etiología , Atrofia Muscular/metabolismo , Neoplasias/complicaciones , Neoplasias/metabolismo , Materiales BiocompatiblesRESUMEN
Three-dimensional (3D) bioprinted culture systems allow to accurately control microenvironment components and analyze their effects at cellular and tissue levels. The main objective of this study was to identify, quantify and localize the effects of physical-chemical communication signals between tumor cells and the surrounding biomaterial stiffness over time, defining how aggressiveness increases in SK-N-BE(2) neuroblastoma (NB) cell line. Biomimetic hydrogels with SK-N-BE(2) cells, methacrylated gelatin and increasing concentrations of methacrylated alginate (AlgMA 0%, 1% and 2%) were used. Young's modulus was used to define the stiffness of bioprinted hydrogels and NB tumors. Stained sections of paraffin-embedded hydrogels were digitally quantified. Human NB and 1% AlgMA hydrogels presented similar Young´s modulus mean, and orthotopic NB mice tumors were equally similar to 0% and 1% AlgMA hydrogels. Porosity increased over time; cell cluster density decreased over time and with stiffness, and cell cluster occupancy generally increased with time and decreased with stiffness. In addition, cell proliferation, mRNA metabolism and antiapoptotic activity advanced over time and with stiffness. Together, this rheological, optical and digital data show the potential of the 3D in vitro cell model described herein to infer how intercellular space stiffness patterns drive the clinical behavior associated with NB patients.
Asunto(s)
Módulo de Elasticidad , Hidrogeles , Neuroblastoma/patología , Microambiente Tumoral , Animales , Apoptosis , Materiales Biocompatibles , Línea Celular Tumoral , Proliferación Celular , Humanos , Ratones , Modelos Teóricos , Neuroblastoma/metabolismo , ARN Mensajero/metabolismo , Andamios del TejidoRESUMEN
The human musculoskeletal system is comprised mainly of connective tissues such as cartilage, tendon, ligaments, skeletal muscle, and skeletal bone. These tissues support the structure of the body, hold and protect the organs, and are responsible of movement. Since it is subjected to continuous strain, the musculoskeletal system is prone to injury by excessive loading forces or aging, whereas currently available treatments are usually invasive and not always effective. Most of the musculoskeletal injuries require surgical intervention facing a limited post-surgery tissue regeneration, especially for widespread lesions. Therefore, many tissue engineering approaches have been developed tackling musculoskeletal tissue regeneration. Materials are designed to meet the chemical and mechanical requirements of the native tissue three-dimensional (3D) environment, thus facilitating implant integration while providing a good reabsorption rate. With biological systems operating at the nanoscale, nanoengineered materials have been developed to support and promote regeneration at the interprotein communication level. Such materials call for a great precision and architectural control in the production process fostering the development of new fabrication techniques. In this mini review, we would like to summarize the most recent advances in 3D nanoengineered biomaterials for musculoskeletal tissue regeneration, with especial emphasis on the different techniques used to produce them.
RESUMEN
New biocompatible materials have enabled the direct 3D printing of complex functional living tissues, such as skeletal and cardiac muscle. Gelatinmethacryloyl (GelMA) is a photopolymerizable hydrogel composed of natural gelatin functionalized with methacrylic anhydride. However, it is difficult to obtain a single hydrogel that meets all the desirable properties for tissue engineering. In particular, GelMA hydrogels lack versatility in their mechanical properties and lasting 3D structures. In this work, a library of composite biomaterials to obtain versatile, lasting, and mechanically tunable scaffolds are presented. Two polysaccharides, alginate and carboxymethyl cellulose chemically functionalized with methacrylic anhydride, and a synthetic material, such as poly(ethylene glycol) diacrylate are combined with GelMA to obtain photopolymerizable hydrogel blends. Physical properties of the obtained composite hydrogels are screened and optimized for the growth and development of skeletal muscle fibers from C2C12 murine cells, and compared with pristine GelMA. All these composites show high resistance to degradation maintaining the 3D structure with high fidelity over several weeks. Altogether, in this study a library of biocompatible novel and totally versatile composite biomaterials are developed and characterized, with tunable mechanical properties that give structure and support myotube formation and alignment.