Influence of the interaction strength between supramolecular complexes on the topography of neutral polymer multilayer films.

Step-by-step polymer film buildup processes lead to polymer coatings, e.g., polyelectrolyte multilayers, of various structures ranging from continuous smooth films to droplet like discontinuous coatings. Yet, the origin of these different behaviors depending upon the system is not yet known. This study is a first attempt to rationalize the evolution of the coating structure as a function of the strength of the interactions between the polymers constituting the film. We investigated the influence of the strength of noncovalent host-guest interactions between cyclodextrin (CD) and pyrene (Py), ferrocene (Fc) or adamantane (Ad) on the structure of neutral poly(N-hydroxypropylmethacrylamide) (PHPMA) multilayers films formed in a step-by-step manner. In solution, the strength of the inclusion complex (measured by log K where K is the complex association constant) is increasing in the order Py/ß-CD < Fc/ß-CD < Ad/ß-CD and can be further varied in the presence of different sodium salts at different ionic strengths. Depending upon this strength, the buildup process is limited to the formation of isolated aggregates for PHPMA-CD/PHPMA-Py, leading to smooth continuous films for PHPMA-CD/PHPMA-Fc and to droplet-like films, not entirely covering the substrate, for PHPMA-CD/PHPMA-Ad. To study the influence of the strength of the host-guest interactions on the film topography, PHPMA-CD/PHPMA-Fc films were built in the presence of different sodium salts at different ionic strengths. For low host-guest interactions, only isolated aggregates are formed on the substrate. As the strength of the host-guest interactions increases (increase of log K), the formed films go through a droplet-like structure, before becoming continuous but rough for stronger interactions. When the interaction strength is further increased, the roughness of the films decreases, leading to a smooth continuous film before becoming rough again at still higher interaction strength. Smooth continuous multilayers seem thus to be obtained for an optimal range of the interaction strength.

Genipin-cross-linked layer-by-layer assemblies: biocompatible microenvironments to direct bone cell fate.

The design of biomimetic coatings capable of improving the osseointegration of bone biomaterials is a current challenge in the field of bone repair. Toward this end, layer-by-layer (LbL) films composed of natural components are suitable candidates. Chondroitin sulfate A (CSA), a natural glycosaminoglycan (GAG), was used as the polyanionic component because it promotes osteoblast maturation in vivo. In their native state, GAG-containing LbL films are generally cytophobic because of their low stiffness. To stiffen our CSA-based LbL films, genipin (GnP) was used as a natural cross-linking agent, which is much less cytotoxic than conventional chemical cross-linkers. GnP-cross-linked films display an original combination of microscale topography and tunable mechanical properties. Structural characterization was partly based on a novel donor/acceptor Förster resonance energy transfer (FRET) couple, namely, FITC/GnP, which is a promising approach for further inspection of any GnP-cross-linked system. GnP-cross-linked films significantly promote adhesion, proliferation, and early and late differentiation of preosteoblasts.

Protein-triggered instant disassembly of biomimetic Layer-by-Layer films.

Layer-by-Layer (LbL) coatings are promising tools for the biofunctionalization of biomaterials, as they allow stress-free immobilization of proteins. Here, we explore the possibility to immobilize phosvitin, a highly phosphorylated protein viewed as a model of bone phosphoproteins and, as such, a potential promotive agent of surface-directed biomineralization, into biomimetic LbL architectures. Two immobilization protocols are attempted, first, using phosvitin as the polyanionic component of phosvitin/poly-(L-lysine) films and, second, adsorbing it onto preformed chondroitin sulfate/poly-(L-lysine) films. Surprisingly, it is neither possible to embed phosvitin as the constitutive polyanion of the LbL architectures nor to adsorb it atop preformed films. Instead, phosvitin triggers instant massive film disassembly. This unexpected, incidentally detected behavior constitutes the first example of destructive interactions between LbL films and a third polyelectrolyte, a fortiori a protein, which might open a route toward new stimuli-responsive films for biosensing or drug delivery applications. Interestingly, additional preliminary results still indicate a promotive effect of phosvitin-containing remnant films on calcium phosphate deposition.

Synergistic influence of topomimetic and chondroitin sulfate-based treatments on osteogenic potential of Ti-6Al-4V.

We combined topographical and chemical surface modifications of Ti-6Al-4V (TA6V) to improve its osteogenic potential. By acid-etching, we first generated topomimetic surface features resembling, in size and roughness, bone cavities left by osteoclasts. Next, we coated these surfaces with biomimetic Layer-by-Layer films (LbL), composed of chondroitin sulfate A and poly-l-lysine that were mechanically tuned after a post-treatment with genipin. The structural impact of each surface processing step was thoroughly inspected. The desired nano/microrough topographies of TA6V were maintained upon LbL deposition. Whereas no significant promotion of adhesion and proliferation of MC3T3-E1 preosteoblasts were detected after independent or combined modifications of the topography and the chemical composition of the substrates, osteogenic maturation was promoted when both surface treatments were combined, as was evidenced by significant long-term matrix mineralization. The results open promising route toward improved osseointegration of titanium-based implants. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1988-2000, 2016.

Pre-osteoblasts on poly(L-lactic acid) and silicon oxide: Influence of fibronectin and albumin adsorption.

Cell adhesion and subsequent viability are critical initial steps in biomaterial-tissue integration and are strongly dependent on the material properties and the presence of matrix proteins. In the present study MC3T3-E1 osteoblast-like cell behavior on silicon oxide (SO) and poly(L-lactic acid) (PLLA) substrates has been examined, with a focus on the influence of the adhesive protein fibronectin and the non-adhesive protein albumin adsorbed on the substrates. Quartz crystal microgravimetry showed adsorption of fibronectin and albumin to be nearly identical on SO and PLLA. Subsequent exposure a previously adsorbed fibronectin layer to albumin decreased the rigidity of the adsorbed layer without any measurable increase in adsorbed mass. Cell adhesion and spreading were significantly enhanced on both SO and PLLA substrates coated with fibronectin or with fibronectin and albumin, compared with uncoated or albumin-coated substrates. The only statistically significant difference between the two substrates in these assays was increased spreading on PLLA compared with SO in the presence of fibronectin and albumin. Cell proliferation was significantly higher on SO compared with PLLA after 7 days culture, but depended on the presence of fibronectin only in the PLLA system. In contrast, mitochondrial activity was higher on PLLA than on SO, and was enhanced by fibronectin on both substrates. PLLA substrates coated with fibronectin and subsequently exposed to albumin exhibited the highest level of cell differentiation, as assayed via alkaline phosphatase activity. These results demonstrate the importance of adsorbed proteins on osteoblast-like cell-surface interactions.