Multiplicity of Th(IV) and U(VI) HEH[EHP] Chelates at Low Temperatures from Concentrated Nitric Acid Extractions.

Organophosphorus extractants have been widely investigated for lanthanide recovery from ore and for application in the reprocessing of spent nuclear fuel, such as in Advanced TALSPEAK schemes. Determining the speciation of the extracted metal complex in the organic phase remains a significant challenge. A better understanding of the variability of HEH[EHP]-actinide complexes and the speciation of chelates for tetra- and hexavalent actinides can improve the predictability of actinide phase transfer in such biphasic systems. In this study, the extraction of Th(IV) and U(VI) from nitric acid media using HEH[EHP] in heptane is examined. The distribution ratio as a function of nitric acid concentration was quantified using UV-vis spectroscopy, and then the speciation of HEH[EHP]-metal complexes in the organic phase was investigated using Fourier transform infrared (FTIR) spectroscopy and low-temperature 31P nuclear magnetic resonance (NMR) spectroscopy. In addition to perturbation of the vibrational modes proximal to the phosphonic moiety in HEH[EHP] in the FTIR spectra, the appearance of a nitrate signal was found in the organic phase following extraction from the highest acidity conditions for U(VI). The 31P NMR spectra of the organic phase at a low temperature (-70 °C) exhibited a surprising number (n) of resonances (n ≥ 7 for Th(IV) and n ≥ 11 for U(VI)), with the distribution between these resonances changing with the initial concentration of nitric acid in the aqueous phase. These results indicate that the compositions of the inner and outer spheres of the extracted actinides in the organic phase are more diverse than initially thought.

Structural Investigation of Technetium Dibutylphosphate Species Using X-ray Absorption Fine Structure Spectroscopy.

The speciation of Tc after the extraction of Tc(IV) from H2O and 1 M HNO3 by dibutylphosphoric acid (HDBP) in dodecane has been studied by X-ray absorption fine structure (XAFS) spectroscopy. Results show the formation of dimeric species with Tc2O2 and Tc2O units, and the formulas [Tc2O2(DBP·HDBP)4] (1) and [Tc2O(NO3)2(DBP)2(DBP·HDBP)2] (2) were, respectively, proposed for the species extracted from H2O and 1 M HNO3. The interatomic Tc-Tc distances found in the Tc2O2 and Tc2O units [2.55(3) and 3.57(4) Å, respectively] are similar to the ones found in Tc(IV) dinuclear species. It is likely that the speciation of Tc(IV) in dodecane is due to the extraction of a species with a Tc2O unit for (2) and to the redissolution of a Tc(IV)-DBP solid for (1). The XAFS results for (1) and (2) were compared to that obtained for the extraction of Tc(IV) with TBP/HDBP/dodecane from 0.5 M HNO3, (3) which highlight the formation of Tc mononuclear nitrate species {i.e., [Tc(NO3)3(DBP)] or [Tc(NO3)2(DBP·HDBP)]}. These results confirm the importance of the preparation and speciation of the Tc(IV) aqueous solutions prior to extraction and how much this influences and drives the final Tc speciation in organic extraction. These studies outline the complexity of Tc separation chemistry and provide insights into the behavior of Tc during the reprocessing of used nuclear fuel.

Transuranium Sulfide via the Boron Chalcogen Mixture Method and Reversible Water Uptake in the NaCuTS3 Family.

The behavior of 5f electrons in soft ligand environments makes actinides, and especially transuranium chalcogenides, an intriguing class of materials for fundamental studies. Due to the affinity of actinides for oxygen, however, it is a challenge to synthesize actinide chalcogenides using non-metallic reagents. Using the boron chalcogen mixture method, we achieved the synthesis of the transuranium sulfide NaCuNpS3 starting from the oxide reagent, NpO2. Via the same synthetic route, the isostructural composition of NaCuUS3 was synthesized and the material contrasted with NaCuNpS3. Single crystals of the U-analogue, NaCuUS3, were found to undergo an unexpected reversible hydration process to form NaCuUS3·xH2O (x ≈ 1.5). A large combination of techniques was used to fully characterize the structure, hydration process, and electronic structures, specifically a combination of single crystal, powder, high temperature powder X-ray diffraction, extended X-ray absorption fine structure, infrared, and inductively coupled plasma spectroscopies, thermogravimetric analysis, and density functional theory calculations. The outcome of these analyses enabled us to determine the composition of NaCuUS3·xH2O and obtain a structural model that demonstrated the retention of the local structure within the [CuUS3]- layers throughout the hydration-dehydration process. Band structure, density of states, and Bader charge calculations for NaCuUS3, NaCuUS3·xH2O, and NaCuNpS3 along with X-ray absorption near edge structure, UV-vis-NIR, and work function measurements on ACuUS3 (A = Na, K, and Rb) and NaCuUS3·xH2O samples were carried out to demonstrate that electronic properties arise from the [CuTS3]- layers and show surprisingly little dependence on the interlayer distance.

An Americium-Containing Metal-Organic Framework: A Platform for Studying Transplutonium Elements.

The synthesis, structure, and spectroscopic characterization of the first transplutonium metal-organic framework (MOF) is described. The preparation and structure of Am-GWMOF-6, [Am2 (C6 H8 O4 )3 (H2 O)2 ][(C10 H8 N2 )], is analogous to that of the isostructural trivalent lanthanide-only containing material GWMOF-6. The presented MOF architecture is used as a platform to probe Am3+ coordination chemistry and guest-enhanced luminescent emission, whereas the framework itself provides a means to monitor the effects of self-irradiation upon crystallinity over time. Presented here is a discussion of these properties and the opportunities that MOFs provide in the structural and spectroscopic study of actinides.

Extraction of Water and Speciation of Trivalent Lanthanides and Americium in Organophosphorus Extractants.

Complexes of the trivalent lanthanides and Am with di-2-ethylhexylphosphoric acid (HDEHP) dissolved in an aliphatic diluent were probed with UV-vis, X-ray absorption fine structure, and time-resolved fluorescence spectroscopy while the water concentration was determined by Karl Fischer titrations. In particular, our work focuses on the Nd-hypersensitive UV-vis absorbance region to identify the cause of changing absorbance values at 570 and 583 nm in relation to the pseudooctahedral Nd environment when coordinated with three HDEHP dimers. In contrast to recently reported interpretations, we establish that while impurities have an effect on this electronic transition band, a high water content can cause distortion of the pseudooctahedral symmetry of the six-coordinate Nd, resembling the reported spectra of the seven-coordinate Nd compounds. Extended X-ray absorption fine structure analysis of the Nd in high-concentration HDEHP solutions also points to an increase in the coordination number from 6 to 7. The spectral behavior of other lanthanides (Pr, Ho, Sm, and Er) and AmIII as a function of the HDEHP concentration suggests that water coordination with the metal likely depends on the metal's effective charge. Fluorescence data using lifetime studies and excitation and emission spectra support the inclusion of water in the Eu coordination sphere. Further, the role of the effective charge was confirmed by a comparison of the Gibbs free energies of six- and seven-coordinate La-HDEHP-H2O and Lu-HDEHP-H2O complexes using density functional theory. In contrast, HEH[EHP], the phosphonic acid analogue of HDEHP, exhibits a smaller capacity for water, and the electronic absorption spectra of Nd or Am appear to be unchanged, although the Pr spectra show a noticeable change in intensity as a function of the water content. Electronic absorption extinction coefficients of AmIII, NdIII, PrIII, SmIII, ErIII, and HoIII as a function of the HDEHP concentration are reported for the first time.

Speciation of Technetium Dibutylphosphate in the Third Phase Formed in the TBP/HNO3 Solvent Extraction System.

The speciation of technetium in the nitric acid/dibutylphosphoric acid (HDBP)-n-dodecane system was studied by extended X-ray absorption fine structure (EXAFS) spectroscopy and theoretical methods. Tetravalent technetium, produced by the hydrazine reduction of TcO4- in 3 M HNO3, was extracted by HDBP in n-dodecane (30% by volume). During extraction, the splitting of the organic phase into a heavy phase and a light phase was observed. EXAFS analysis is consistent with the presence of Tc(NO3)3(DBP)(HDBP)2 in the light phase and Tc(NO3)2(DBP)2(HDBP)2 in the heavy phase. Density functional theory calculations at the B3LYP/6-31G* level confirm the stability of the proposed species and indicate that stereoisomers -mer- and fac-Tc(NO3)3(DBP)(HDBP)2 for the light phase and cis- and trans-Tc(NO3)2(DBP)2(HDBP)2 for the heavy phase] could coexist in the system (in the n-dodecane solution). Mechanisms of formation of Tc(NO3)3(DBP)(HDBP)2 and Tc(NO3)2(DBP)2(HDBP)2 are proposed.

X-ray Induced Cycling of Rare-Earth Elements between Bulk and Interfacial Liquid.

Reversible cycling of rare-earth elements between an aqueous electrolyte solution and its free surface is achieved by X-ray exposure. This exposure alters the competitive equilibrium between lanthanide ions bound to a chelating ligand, diethylenetriamine pentaacetic acid (DTPA), in the bulk solution and to insoluble monolayers of extractant di-hexadecyl phosphoric acid (DHDP) at its surface. Evidence for the exposure-induced temporal variations in the lanthanide surface density is provided by X-ray fluorescence near total reflection measurements. Comparison of results when X-rays are confined to the aqueous surface region to results when X-rays transmit into the bulk solution suggests the importance of aqueous radiolysis in the adsorption cycle. Amine binding sites in DTPA are identified as a likely target of radiolysis products. The molecules DTPA and DHDP are like those used in the separation of lanthanides from ores and in the reprocessing of nuclear fuel. These results suggest that an external source of X-rays can be used to drive rare-earth element separations. More generally, use of X-rays to controllably dose a liquid interface with lanthanides could trigger a range of interfacial processes, including enhanced metal ion extraction, catalysis, and materials synthesis.

Aqueous complexation of thorium(IV), uranium(IV), neptunium(IV), plutonium(III/IV), and cerium(III/IV) with DTPA.

Aqueous complexation of Th(IV), U(IV), Np(IV), Pu(III/IV), and Ce(III/IV) with DTPA was studied by potentiometry, absorption spectrophotometry, and cyclic voltammetry at 1 M ionic strength and 25 °C. The stability constants for the 1:1 complex of each trivalent and tetravalent metal were calculated. From the potentiometric data, we report stability constant values for Ce(III)DTPA, Ce(III)HDTPA, and Th(IV)DTPA of log ß(101) = 20.01 ± 0.02, log ß(111) = 22.0 ± 0.2, and log ß(101) = 29.6 ± 1, respectively. From the absorption spectrophotometry data, we report stability constant values for U(IV)DTPA, Np(IV)DTPA, and Pu(IV)DTPA of log ß(101) = 31.8 ± 0.1, 32.3 ± 0.1, and 33.67 ± 0.02, respectively. From the cyclic voltammetry data, we report stability constant values for Ce(IV) and Pu(III) of log ß(101) = 34.04 ± 0.04 and 20.58 ± 0.04, respectively. The values obtained in this work are compared and discussed with respect to the ionic radius of each cationic metal.

Toward mechanistic understanding of nuclear reprocessing chemistries by quantifying lanthanide solvent extraction kinetics via microfluidics with constant interfacial area and rapid mixing.

The closing of the nuclear fuel cycle is an unsolved problem of great importance. Separating radionuclides produced in a nuclear reactor is useful both for the storage of nuclear waste and for recycling of nuclear fuel. These separations can be performed by designing appropriate chelation chemistries and liquid-liquid extraction schemes, such as in the TALSPEAK process (Trivalent Actinide-Lanthanide Separation by Phosphorus reagent Extraction from Aqueous Komplexes). However, there are no approved methods for the industrial scale reprocessing of civilian nuclear fuel in the United States. One bottleneck in the design of next-generation solvent extraction-based nuclear fuel reprocessing schemes is a lack of interfacial mass transfer rate constants obtained under well-controlled conditions for lanthanide and actinide ligand complexes; such rate constants are a prerequisite for mechanistic understanding of the extraction chemistries involved and are of great assistance in the design of new chemistries. In addition, rate constants obtained under conditions of known interfacial area have immediate, practical utility in models required for the scaling-up of laboratory-scale demonstrations to industrial-scale solutions. Existing experimental techniques for determining these rate constants suffer from two key drawbacks: either slow mixing or unknown interfacial area. The volume of waste produced by traditional methods is an additional, practical concern in experiments involving radioactive elements, both from disposal cost and experimenter safety standpoints. In this paper, we test a plug-based microfluidic system that uses flowing plugs (droplets) in microfluidic channels to determine absolute interfacial mass transfer rate constants under conditions of both rapid mixing and controlled interfacial area. We utilize this system to determine, for the first time, the rate constants for interfacial transfer of all lanthanides, minus promethium, plus yttrium, under TALSPEAK process conditions, as a first step toward testing the molecular mechanism of this separation process.

Recovery of high specific activity molybdenum-99 from accelerator-induced fission on low-enriched uranium for technetium-99m generators.

A new process was developed to recover high specific activity (no carrier added) 99Mo from electron-accelerator irradiated U3O8 or uranyl sulfate targets. The process leverages a novel solvent extraction scheme to recover Mo using di(2-ethylhexyl) phosphoric acid following uranium and transuranics removal with tri-n-butyl phosphate. An anion-exchange concentration column step provides a final purification, generating pure 99Mo intended for making 99Mo/99mTc generators. The process was demonstrated with irradiated uranium targets resulting in more than 95% 99Mo recovery and without presence of fission products or actinides in the product.

Antagonistic Role of Aqueous Complexation in the Solvent Extraction and Separation of Rare Earth Ions.

Solvent extraction is used widely for chemical separations and environmental remediation. Although the kinetics and efficiency of this process rely upon the formation of ion-extractant complexes, it has proven challenging to identify the location of ion-extractant complexation within the solution and its impact on the separation. Here, we use tensiometry and X-ray scattering to characterize the surface of aqueous solutions of lanthanide chlorides and the water-soluble extractant bis(2-ethylhexyl) phosphoric acid (HDEHP), in the absence of a coexisting organic solvent. These studies restrict ion-extractant interactions to the aqueous phase and its liquid-vapor interface, allowing us to explore the consequences that one or the other is the location of ion-extractant complexation. Unexpectedly, we find that light lanthanides preferentially occupy the liquid-vapor interface. This contradicts our expectation that heavy lanthanides should have a higher interfacial density since they are preferentially extracted by HDEHP in solvent extraction processes. These results reveal the antagonistic role played by ion-extractant complexation within the aqueous phase and clarify the advantages of complexation at the interface. Extractants in common use are often soluble in water, in addition to their organic phase solubility, and similar effects to those described here are expected to be relevant to a variety of separations processes.

Author Correction: Closing the Nuclear Fuel Cycle with a Simplified Minor Actinide Lanthanide Separation Process (ALSEP) and Additive Manufacturing.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Closing the Nuclear Fuel Cycle with a Simplified Minor Actinide Lanthanide Separation Process (ALSEP) and Additive Manufacturing.

Expanded low-carbon baseload power production through the use of nuclear fission can be enabled by recycling long-lived actinide isotopes within the nuclear fuel cycle. This approach provides the benefits of (a) more completely utilizing the energy potential of mined uranium, (b) reducing the footprint of nuclear geological repositories, and (c) reducing the time required for the radiotoxicity of the disposed waste to decrease to the level of uranium ore from one hundred thousand years to a few hundred years. A key step in achieving this goal is the separation of long-lived isotopes of americium (Am) and curium (Cm) for recycle into fast reactors. To achieve this goal, a novel process was successfully demonstrated on a laboratory scale using a bank of 1.25-cm centrifugal contactors, fabricated by additive manufacturing, and a simulant containing the major fission product elements. Americium and Cm were separated from the lanthanides with over 99.9% completion. The sum of the impurities of the Am/Cm product stream using the simulated raffinate was found to be 3.2 × 10-3 g/L. The process performance was validated using a genuine high burnup used nuclear fuel raffinate in a batch regime. Separation factors of nearly 100 for 154Eu over 241Am were achieved. All these results indicate the process scalability to an engineering scale.

Aqueous complexation of citrate with neodymium(III) and americium(III): a study by potentiometry, absorption spectrophotometry, microcalorimetry, and XAFS.

The aqueous complexation of Nd(III) and Am(III) with anions of citrate was studied by potentiometry, absorption spectrophotometry, microcalorimetry, and X-ray absorption fine structure (XAFS). Using potentiometric titration data fitting the metal-ligand (L) complexes that were identified for Nd(III) were NdHL, NdL, NdHL2, and NdL2; a review of trivalent metal-citrate complexes is also included. Stability constants for these complexes were calculated from potentiometric and spectrophotometric titrations. Microcalorimetric results concluded that the entropy term of complex formation is much more dominant than the enthalpy. XAFS results showed a dependence in the Debye-Waller factor that indicated Nd(iii)-citrate complexation over the pH range of 1.56-6.12.

CMPO-functionalized C3-symmetric tripodal ligands in liquid/liquid extractions: efficient, selective recognition of Pu(IV) with low affinity for 3+ metal ions.

Structural modifications of carbamoylmethylphosphine oxide (CPMO)-functionalized triphenoxymethane platforms are described, and the influence of these changes on the ability of the ligand to extract actinides from simulated acidic nuclear waste streams has been evaluated. The ligand system has been shown to have excellent binding efficiency and a selectivity for An(IV) in comparison to the a simple monomeric CMPO ligand under analogous conditions. Both the extraction efficiency and selectivity are strongly dependent on the flexibility and electronic properties of the ligating units in the triphenoxymethane construct. The Tb(III) and Bi(III) nitrate complexes of tris-CMPO derivatives have been isolated, and their structures were elucidated by NMR, ESI FT-ICR MS, and X-ray analysis, providing information on the interactions between metal ions and the tris-CMPO molecules.