Mixed Culture Biocathodes for Production of Hydrogen, Methane, and Carboxylates.

Formation of hydrogen, methane, and organics at biocathodes is an attractive new application of bioelectrochemical systems (BESs). Using mixed cultures, these products can be formed at certain cathode potentials using specific operating conditions, of which pH is important. Thermodynamically, the reduction of CO2 to methane is the most favorable reaction, followed by reduction of CO2 to acetate and ethanol, and hydrogen. In practice, however, the cathode potential at which these reactions occur is more negative, meaning that more energy is required to drive the reaction. Therefore, hydrogen is often found as a second product or intermediate in the conversion of CO2 to both methane and carboxylates. In this chapter we summarize the inocula used for biocathode processes and discuss the achieved conversion rates and cathode potentials for formation of hydrogen, methane, and carboxylates. Although this overview reveals that BESs offer new opportunities for the bioproduction of different compounds, there are still challenges that need to be overcome before these systems can be applied on a larger scale. Graphical Abstract.

Granular Carbon-Based Electrodes as Cathodes in Methane-Producing Bioelectrochemical Systems.

Methane-producing bioelectrochemical systems generate methane by using microorganisms to reduce carbon dioxide at the cathode with external electricity supply. This technology provides an innovative approach for renewable electricity conversion and storage. Two key factors that need further attention are production of methane at high rate, and stable performance under intermittent electricity supply. To study these key factors, we have used two electrode materials: granular activated carbon (GAC) and graphite granules (GG). Under galvanostatic control, the biocathodes achieved methane production rates of around 65 L CH4/m2catproj/d at 35 A/m2catproj, which is 3.8 times higher than reported so far. We also operated all biocathodes with intermittent current supply (time-ON/time-OFF: 4-2', 3-3', 2-4'). Current-to-methane efficiencies of all biocathodes were stable around 60% at 10 A/m2catproj and slightly decreased with increasing OFF time at 35 A/m2catproj, but original performance of all biocathodes was recovered soon after intermittent operation. Interestingly, the GAC biocathodes had a lower overpotential than the GG biocathodes, with methane generation occurring at -0.52 V vs. Ag/AgCl for GAC and at -0.92 V for GG at a current density of 10 A/m2catproj. 16S rRNA gene analysis showed that Methanobacterium was the dominant methanogen and that the GAC biocathodes experienced a higher abundance of proteobacteria than the GG biocathodes. Both cathode materials show promise for the practical application of methane-producing BESs.

Bioelectrochemical Power-to-Gas: State of the Art and Future Perspectives.

Bioelectrochemical power-to-gas (BEP2G) is considered a potentially convenient way of storing renewable surplus electricity in the form of methane. In methane-producing bioelectrochemical systems (BESs), carbon dioxide and electrical energy are converted into methane, using electrodes that supply either electrons or hydrogen to methanogenic archaea. This review summarizes the performance of methane-producing BESs in relation to cathode potential, electrode materials, operational strategies, and inoculum. Analysis and estimation of energy input and production rates show that BEP2G may become an attractive alternative for thermochemical methanation, and biochemical methanogenesis. To determine if BEP2G can become a future power-to-gas technology, challenges relating to cathodic energy losses, choice of a suitable electron donor, efficient reactor design/operation, and experience with large reactors need to be overcome.