Self-Assembly of Colloidal Nanocrystals into 3D Binary Mesocrystals.

Biominerals are unique materials found in many living organisms that often display outstanding functionalities attributed to their mesocrystalline structure. Mesocrystals are nanocrystal superstructures with mutual crystallographic alignment of the building units. One could thus imagine these optimized evolutionary systems as archetypes to fabricate advanced materials. The main advantage of such systems relies on their ability to combine the features of the nanocrystals with those of single crystalline microscopic structures, yielding assemblies with directional, enhanced, and potentially emergent properties. Moreover, fueled by the promises of multifunctional materials with unprecedented and tunable properties, the rational design of mesocrystals assembled from two distinct colloidal nanocrystal ensembles has become a recent focus of research. However, the combination of dissimilar nanocrystals into ordered binary superstructures is still a major scientific challenge due to the nature of the coassembly process.We focus this Account on the growth of tridimensional (3D) binary mesocrystals and the understanding of the self-assembly of two colloidal nanocrystal ensembles with the ultimate goal to serve as a basis for more rational mesocrystal syntheses in the future. The formation of mesocrystals demands nanocrystals with defined surface faceting, the primary factor influencing their oriented self-assembly. Notably, such a process cannot be successfully afforded without functionalized nanocrystals with high and, in many cases, tunable colloidal stability. Besides, the nature and solvation degree of the surface ligand shell influences the effective shape of the nanocrystals and the kinetics of self-assembly. If the assembly is triggered by reducing the colloidal stability with nonsolvents, 3D single-component mesocrystals are often grown. Here, the different magnitude of the van der Waals attraction forces between nanocrystals with differing compositions, dimensions, and morphologies generally favors the segregation and growth of single component mesocrystals. This phenomenon was illustrated during the successful preparation of 3D binary mesocrystals composed of iron oxide and platinum nanocubes. Although the building blocks possessed comparable sizes and were stabilized by similar ligands, the amount of the second component could only be arbitrarily tuned up to some extent, even when the assembly conditions were rationally optimized to achieve 3D binary mesocrystals. Only a small amount of it was effectively incorporated into the matrix of the initial mesocrystal. The 3D binary mesocrystal growth process demands a delicate control over the size, shape, and surface chemistry of the nanocrystals, the solvent nature, and the self-assembly process. Hence, the improvement of our ability to control the synthesis of 3D binary mesocrystalline materials is critical to exploit their potential toward technological applications in catalysis, energy storage, or structural materials.

How a Facet of a Nanocrystal Is Formed: The Concept of the Symmetry Based Kinematic Theory.

Conventional nanocrystal (NC) growth mechanisms have overwhelmingly focused on the final exposed facets to explain shape evolution. However, how the final facets are formed from the initial nuclei or seeds, has not been specifically interrogated. In this concept paper, we would like to concentrate on this specific topic, and introduce the symmetry based kinematic theory (SBKT) to explain the formation and evolution of crystal facets. It is a crystallographic theory based on the classical crystal growth concepts developed to illustrate the shape evolution during the NC growth. The most important principles connecting the basic NC growth processes and morphology evolution are the preferential growth directions and the properties of kinematic waves. On the contrary, the final facets are just indications of how the crystal growth terminates, and their formation and evolution rely on the NC growth processes: surface nucleation and layer advancement. Accordingly, the SBKT could even be applied to situations where non-faceted NCs such as spheres are formed.

A Nanoparticle-Based Model System for the Study of Heterogeneous Nucleation Phenomena.

Heterogeneous nucleation processes are involved in many important phenomena in nature, including devastating human diseases caused by amyloid structures or the harmful frost formed on fruits. However, understanding them is challenging due to the difficulties of characterizing the initial stages of the process occurring at the interface between the nucleation medium and the substrate surfaces. This work implements a model system based on gold nanoparticles to investigate the effect of particle surface chemistry and substrate properties on heterogeneous nucleation processes. Using widely available techniques such as UV-vis-NIR spectroscopy and light microscopy, gold nanoparticle-based superstructure formation was studied in the presence of substrates with different hydrophilicity and electrostatic charges. The results were evaluated on grounds of classical nucleation theory (CNT) to reveal kinetic and thermodynamic contributions of the heterogeneous nucleation process. In contrast to nucleation from ions, the kinetic contributions toward nucleation turned out to be larger than the thermodynamic contributions for the nanoparticle building blocks. Electrostatic interactions between substrates and nanoparticles with opposite charges were crucial to enhancing the nucleation rates and decreasing the nucleation barrier of superstructure formation. Thereby, the described strategy is demonstrated advantageous for characterizing physicochemical aspects of heterogeneous nucleation processes in a simple and accessible manner, which could be potentially explored to study more complex nucleation phenomena.

Influence of anisotropy on heterogeneous nucleation of gold nanorod assemblies.

In this study, we analysed for the first time heterogeneous nucleation with anisotropic nanoparticles as a model system for non-spherical building units on the nanoscale. Gold nanorods were synthesised and assembled to investigate the phenomenon of heterogeneous nucleation. To determine the influence of the particle shape on heterogeneous nucleation, we utilised gold nanorods with varying aspect ratios, ranging from 3.00 and 2.25 to 1.75, while keeping the surface chemistry constant. First, the nucleation of the gold nanorod assemblies in solution and the process kinetics were analyzed with UV-vis-NIR spectroscopy followed by a microscopic examination of the gold nanorod-based superstructures formed heterogeneously on substrates. Here, positively charged cetyltrimethylammonium bromide (CTAB)-functionalized gold nanorods and negatively charged polystyrene sulfonate (PSS) functionalized substrates ensured the directed heterogeneous nucleation on the substrates. A combination of light microscopy with simultaneous UV-vis-NIR spectroscopy allowed us to observe the gold nanorod-based superstructure formation on the substrates in situ and to determine the nucleation rates of the process. We analysed the resulting data with the classical nucleation theory, which revealed a dominating kinetic term and a negligible thermodynamic term in contrast to ionic systems like calcium carbonate. Our studies consistently exhibit an influence of the aspect ratio on the nucleation behaviour resulting in faster nucleation of superstructures as the aspect ratio decreases. Hence our studies show unprecedented insight into the influence of particle anisotropy on the nucleation and growth of nanorod-based superstructures and reveal significant differences in the nucleation of nanoparticle building units compared to the nucleation of atoms or molecules as building units.

A Symmetry-Based Kinematic Theory for Nanocrystal Morphology Design.

The growth of crystalline nanoparticles (NPs) generally involves three processes: nucleation, growth, and shape evolution. Among them, the shape evolution is less understood, despite the importance of morphology for NP properties. Here, we propose a symmetry-based kinematic theory (SBKT) based on classical growth theories to illustrate the process. Based on the crystal lattice, nucleus (or seed) symmetry, and the preferential growth directions under the experimental conditions, the SBKT can illustrate the growth trajectories. The theory accommodates the conventional criteria of the major existing theories for crystal growth and provides tools to better understand the symmetry-breaking process during the growth of anisotropic structures. Furthermore, complex dendritic growth is theoretically and experimentally demonstrated. Thus, it provides a framework to explain the shape evolution, and extends the morphogenesis prediction to cases, which cannot be treated by other theories.

STEM Tomography of Au Helical Assemblies.

Composite, helical nanostructures formed using cooperative interactions of liquid crystals and Au nanoparticles were studied using a scanning transmission electron microscopy (STEM) mode. The investigated helical assemblies exhibit long-range hierarchical order across length scales, as a result of the crystallization (freezing) directed growth mechanism of nanoparticle-coated twisted nanoribbons and their ability to form organized bundles. Here, STEM methods were used to reproduce the 3D structure of the Au nanoparticle double helix.

Microscopic Analysis of Heterogeneous Nucleation of Nanoparticle Superstructures.

Nucleation phenomena play an important role in our world, and understanding them is of major interest. However, we lack analytical methods with the sufficient temporal and spatial resolution to analyze nucleation processes. In this work we used CTAB-stabilized gold nanocubes as a model system for nucleation, meaning the nanoparticles act like ions or atoms and built up larger superstructures comparable to normal nucleation phenomena. Thereby we analyzed the heterogeneous nucleation of the gold nanocubes on hydrophobized and negatively charged mica surfaces with a combination of UV-vis-NIR spectroscopy and light microscopy. With the plasmon resonance of the gold nanocubes we gained valuable information about the early nucleation of the particles and their concentration in solution via UV-vis-NIR spectroscopy. The combination with a light microscope enabled the simultaneous detection of nucleated species on the surfaces and opened the possibility to analyze the kinetics of the heterogeneous nucleation process. With this, we were able to determine the nucleation rates. While the hydrophobized surfaces did not influence the nucleation of the gold nanocubes, the negatively charged surfaces greatly promoted the nucleation. Thereby, we could demonstrate that the combination of simple and commonly available light microscopy and optical spectroscopies in general is a suitable and easy strategy to analyze heterogeneous nucleation processes directly in solution on a relevant statistical basis.

Reshaping, Fragmentation, and Assembly of Gold Nanoparticles Assisted by Pulse Lasers.

The vast majority of the outstanding applications of metal nanoparticles (NPs) developed during the last two decades have arisen from their unique optical properties. Within this context, rational synthesis and assembly of gold NPs have been the main research focus, aiming at the design of nanoplasmonic devices with tailored optical functionalities. The progress made in this field is thus to be ascribed to the understanding of the origin of the interaction between light and such gold nanostructures, the dynamics of which have been thoroughly investigated with significant contributions from short and ultrashort pulse laser technologies. We focus this Account on the potential of pulse lasers to provide new fundamental insights into the electron dynamics involved in the interaction of light with the free conduction electrons of Au NPs, that is, localized surface plasmon resonances (LSPRs). The excitation of LSPRs with a femtosecond pulse laser is followed by thermalization of the Au NP electrons and the subsequent relaxation of the nanocrystal lattice and the surrounding environment, which generally results in surface melting. By contrast, nanosecond irradiation usually induces AuNP fragmentation and uncontrolled melting due to overlapping excitation and relaxation phenomena. These concepts have been exploited toward the preparation of highly monodisperse gold nanospheres via pulse laser irradiation of polyhedral nanocrystal colloids, or in the fabrication of nanostructures with "written-in" optical properties. The applicability of pulsed coherent light has been extended toward the direct synthesis and manipulation of Au NPs. Through ablation of a gold target in a liquid with pulse lasers, spherical Au NPs can be synthesized with no need of stabilizing ligands, which is a great advantage in terms of reducing toxicity, rendering these NPs particularly suitable for medical applications. In addition, femtosecond laser irradiation has been proven a unique tool for the controlled welding of plasmonic gold nanostructures by electromagnetic field enhancement at the hot spots of assembled Au NPs. The combination of such nanostructures with pulse lasers promises significant chemical and biochemical advances, including the structural determination of organic reaction intermediates, the investigation of phase transitions in inorganic nanomaterials at mild reaction conditions, or the efficient photothermal destruction of cancer cells avoiding damage of surrounding tissue.

Femtosecond Laser-Controlled Tip-to-Tip Assembly and Welding of Gold Nanorods.

Directed assembly of gold nanorods through the use of dithiolated molecular linkers is one of the most efficient methodologies for the morphologically controlled tip-to-tip assembly of this type of anisotropic nanocrystals. However, in a direct analogy to molecular polymerization synthesis, this process is characterized by difficulties in chain-growth control over nanoparticle oligomers. In particular, it is nearly impossible to favor the formation of one type of oligomer, making the methodology hard to use for actual applications in nanoplasmonics. We propose here a light-controlled synthetic procedure that allows obtaining selected plasmonic oligomers in high yield and with reaction times in the scale of minutes by irradiation with low fluence near-infrared (NIR) femtosecond laser pulses. Selective inhibition of the formation of gold nanorod n-mers (trimers) with a longitudinal localized surface plasmon in resonance with a 800 nm Ti:sapphire laser, allowed efficient trapping of the (n - 1)-mers (dimers) by hot spot mediated photothermal decomposition of the interparticle molecular linkers. Laser irradiation at higher energies produced near-field enhancement at the interparticle gaps, which is large enough to melt gold nanorod tips, offering a new pathway toward tip-to-tip welding of gold nanorod oligomers with a plasmonic response at the NIR. Thorough optical and electron microscopy characterization indicates that plasmonic oligomers can be selectively trapped and welded, which has been analyzed in terms of a model that predicts with reasonable accuracy the relative concentrations of the main plasmonic species.

Nucleation of Amyloid Oligomers by RepA-WH1-Prionoid-Functionalized Gold Nanorods.

Understanding protein amyloidogenesis is an important topic in protein science, fueled by the role of amyloid aggregates, especially oligomers, in the etiology of a number of devastating human degenerative diseases. However, the mechanisms that determine the formation of amyloid oligomers remain elusive due to the high complexity of the amyloidogenesis process. For instance, gold nanoparticles promote or inhibit amyloid fibrillation. We have functionalized gold nanorods with a metal-chelating group to selectively immobilize soluble RepA-WH1, a model synthetic bacterial prionoid, using a hexa-histidine tag (H6). H6-RepA-WH1 undergoes stable amyloid oligomerization in the presence of catalytic concentrations of anisotropic nanoparticles. Then, in a physically separated event, such oligomers promote the growth of amyloid fibers of untagged RepA-WH1. SERS spectral changes of H6-RepA-WH1 on spherical citrate-AuNP substrates provide evidence for structural modifications in the protein, which are compatible with a gradual increase in ß-sheet structure, as expected in amyloid oligomerization.

Polyrotaxane-mediated self-assembly of gold nanospheres into fully reversible supercrystals.

The use of a thiol-functionalized nonionic surfactant to stabilize spherical gold nanoparticles in water induces the spontaneous formation of polyrotaxanes at the nanoparticle surface in the presence of the macrocycle α-cyclodextrin. Whereas using an excess of surfactant an amorphous gold nanocomposite is obtained, under controlled drying conditions the self-assembly between the surface supramolecules provides large and homogenous supercrystals with hexagonal close packing of nanoparticles. Once formed, the self-assembled supercrystals can be fully redispersed in water. The reversibility of the crystallization process may offer an excellent reusable material to prepare gold nanoparticle inks and optical sensors with the potential to be recovered after use.

From Multi- to Single-Hollow Trimetallic Nanocrystals by Ultrafast Heating.

Metal nanocrystals (NCs) display unique physicochemical features that are highly dependent on nanoparticle dimensions, anisotropy, structure, and composition. The development of synthesis methodologies that allow us to tune such parameters finely emerges as crucial for the application of metal NCs in catalysis, optical materials, or biomedicine. Here, we describe a synthetic methodology to fabricate hollow multimetallic heterostructures using a combination of seed-mediated growth routes and femtosecond-pulsed laser irradiation. The envisaged methodology relies on the coreduction of Ag and Pd ions on gold nanorods (Au NRs) to form Au@PdAg core-shell nanostructures containing small cavities at the Au-PdAg interface. The excitation of Au@PdAg NRs with low fluence femtosecond pulses was employed to induce the coalescence and growth of large cavities, forming multihollow anisotropic Au@PdAg nanostructures. Moreover, single-hollow alloy AuPdAg could be achieved in high yield by increasing the irradiation energy. Advanced electron microscopy techniques, energy-dispersive X-ray spectroscopy (EDX) tomography, X-ray absorption near-edge structure (XANES) spectroscopy, and finite differences in the time domain (FDTD) simulations allowed us to characterize the morphology, structure, and elemental distribution of the irradiated NCs in detail. The ability of the reported synthesis route to fabricate multimetallic NCs with unprecedented hollow nanostructures offers attractive prospects for the fabrication of tailored high-entropy alloy nanoparticles.

Chiral Seeded Growth of Gold Nanorods Into Fourfold Twisted Nanoparticles with Plasmonic Optical Activity.

A robust and reproducible methodology to prepare stable inorganic nanoparticles with chiral morphology may hold the key to the practical utilization of these materials. An optimized chiral growth method to prepare fourfold twisted gold nanorods is described herein, where the amino acid cysteine is used as a dissymmetry inducer. Four tilted ridges are found to develop on the surface of single-crystal nanorods upon repeated reduction of HAuCl4 , in the presence of cysteine as the chiral inducer and ascorbic acid as a reducing agent. From detailed electron microscopy analysis of the crystallographic structures, it is proposed that the dissymmetry results from the development of chiral facets in the form of protrusions (tilted ridges) on the initial nanorods, eventually leading to a twisted shape. The role of cysteine is attributed to assisting enantioselective facet evolution, which is supported by density functional theory simulations of the surface energies, modified upon adsorption of the chiral molecule. The development of R-type and S-type chiral structures (small facets, terraces, or kinks) would thus be non-equal, removing the mirror symmetry of the Au NR and in turn resulting in a markedly chiral morphology with high plasmonic optical activity.

Tuneable helices of plasmonic nanoparticles using liquid crystal templates: molecular dynamics investigation of an unusual odd-even effect in liquid crystalline dimers.

Liquid crystalline (LC) dimers formed helical nanofilaments depending on the parity of the alkyl linker, revealing an unusual odd-even effect. Molecular dynamics simulations were used to investigate the observed tendency. Elongation of the linker translates to an increase of the pitch of the helices, which allows achieving tuneable helical assemblies of Au nanoparticles doped to the LC matrix. The impact of the tuneable pitch of helices on the chiral optical properties of composites was investigated with full-wave simulations based on the T-matrix method.

Quantification of the Helical Morphology of Chiral Gold Nanorods.

Chirality in inorganic nanoparticles and nanostructures has gained increasing scientific interest, because of the possibility to tune their ability to interact differently with left- and right-handed circularly polarized light. In some cases, the optical activity is hypothesized to originate from a chiral morphology of the nanomaterial. However, quantifying the degree of chirality in objects with sizes of tens of nanometers is far from straightforward. Electron tomography offers the possibility to faithfully retrieve the three-dimensional morphology of nanomaterials, but only a qualitative interpretation of the morphology of chiral nanoparticles has been possible so far. We introduce herein a methodology that enables us to quantify the helicity of complex chiral nanomaterials, based on the geometrical properties of a helix. We demonstrate that an analysis at the single particle level can provide significant insights into the origin of chiroptical properties.

Insights into colloidal nanoparticle-protein corona interactions for nanomedicine applications.

Colloidal nanoparticles (NPs) have attracted significant attention due to their unique physicochemical properties suitable for diagnosing and treating different human diseases. Nevertheless, the successful implementation of NPs in medicine demands a proper understanding of their interactions with the different proteins found in biological fluids. Once introduced into the body, NPs are covered by a protein corona (PC) that determines the biological behavior of the NPs. The formation of the PC can eventually favor the rapid clearance of the NPs from the body before fulfilling the desired objective or lead to increased cytotoxicity. The PC nature varies as a function of the different repulsive and attractive forces that govern the NP-protein interaction and their colloidal stability. This review focuses on the phenomenon of PC formation on NPs from a physicochemical perspective, aiming to provide a general overview of this critical process. Main issues related to NP toxicity and clearance from the body as a result of protein adsorption are covered, including the most promising strategies to control PC formation and, thereby, ensure the successful application of NPs in nanomedicine.

Simple Determination of Gold Nanocrystal Dimensions by Analytical Ultracentrifugation via Surface Ligand-Solvent Density Matching.

Analytical ultracentrifugation (AUC) is a powerful technique to observe colloidal nanocrystals (NCs) directly in solution and obtain critical information about their physical-chemical properties. Nevertheless, a more comprehensive implementation of AUC for the characterisation of such a class of crystalline colloids has been traditionally impaired by the requirement of having a priori knowledge of the complex, multilayered structure formed by NC in solution. This includes the nature (density and mass) of the surface ligands (SLs) that provide NC colloidal stability and the shell of solvent molecules formed on it. Herein, we propose a methodology to determine the NCs size by using SLs with a density equal to that of the solvent. Thereby, the buoyancy force of the SL shell is neutral, and the density of the NCs is sufficient a priori knowledge to calculate their related mass and size distributions. The simplicity and reliability of the method are evaluated with cetyltrimethylammonium bromide (CTAB) stabilized spherical gold NCs (AuNCs) of dimensions ranging from 1 to 17 nm. The proposed method has great potential to be transferred to any non-crystalline and crystalline colloids of different nature and composition, which have a density that is equal to the bulk and can be stabilized by SLs having a density that matches that of the solvent.

Synthesis of nickel hexacyanoferrate nanocubes with tuneable dimensions via temperature-controlled Ni2+-citrate complexation.

The citrate-assisted growth of nickel hexacyanoferrate (NiHCF) nanocubes was investigated. Control over the complexation of Ni2+ ions with citrate at different temperatures enabled fine tuning of the nanocrystal (NC) dimensions and their self-assembly into mesocrystals. Our results introduce new concepts towards the synthesis of NiHCF NCs, potentially applicable to other members of the Prussian blue analogues family.

Shaping Liquid Crystals with Gold Nanoparticles: Helical Assemblies with Tunable and Hierarchical Structures Via Thin-Film Cooperative Interactions.

The availability of helical assemblies of plasmonic nanoparticles with precisely controlled and tunable structures can play a key role in the future development of chiral plasmonics and metamaterials. Here, a strategy to efficiently yield helical structures based on the cooperative interactions of liquid crystals and gold nanoparticles in thin films is developed. These nanocomposites exhibit exceptional long-range hierarchical order across length scales, which results from the growth mechanism of nanoparticle-coated twisted nanoribbons and their ability to form organized bundles. The helical assembly formation is governed by the presence of rationally functionalized nanoparticles. Importantly, the thickness of the achieved nanocomposites can be reversibly reconfigured owing to the polymorphic nature of the liquid crystal. The versatility of the proposed approach is demonstrated by preparing helices assembled from nanoparticles of different geometries and dimensions (spherical and rod-like). The described strategy may become an enabling technology for structuring nanoparticle assemblies with high precision and fabricating optically active materials.