Analysis of Ti- and Pb-based particles in the aqueous environment of Melbourne (Australia) via single particle ICP-MS.

The analysis of natural and anthropogenic nanomaterials (NMs) in the environment is challenging and requires methods capable to identify and characterise structures on the nanoscale regarding particle number concentrations (PNCs), elemental composition, size, and mass distributions. In this study, we employed single particle inductively coupled plasma-mass spectrometry (SP ICP-MS) to investigate the occurrence of NMs in the Melbourne area (Australia) across 63 locations. Poisson statistics were used to discriminate between signals from nanoparticulate matter and ionic background. TiO2-based NMs were frequently detected and corresponding NM signals were calibated with an automated data processing platform. Additionally, a method utilising a larger mass bandpass was developed to screen for particulate high-mass elements. This procedure identified Pb-based NMs in various samples. The effects of different environmental matrices consisting of fresh, brackish, or seawater were mitigated with an aerosol dilution method reducing the introduction of salt into the plasma and avoiding signal drift. Signals from TiO2- and Pb-based NMs were counted, integrated, and subsequently calibrated to determine PNCs as well as mass and size distributions. PNCs, mean sizes, particulate masses, and ionic background levels were compared across different locations and environments.

Nanosecond Laser Ablation-Multicollector Inductively Coupled Plasma-Mass Spectrometry for in Situ Fe Isotopic Analysis of Micrometeorites: Application to Micrometer-Sized Glassy Cosmic Spherules.

This work evaluates the use of nanosecond laser ablation-multicollector inductively coupled plasma-mass spectrometry (ns-LA-MC-ICP-MS) for Fe isotopic analysis of glassy cosmic spherules. Several protocols for data acquisition from the transient signals were compared, with the integration method, i.e., isotope ratios obtained by dividing the corresponding signal intensities integrated over the selected signal segment, providing the best precision. The bias caused by instrumental mass discrimination was corrected for by a combination of internal correction using Ni as an internal standard (coming from a conebulized standard solution) and external correction using a matrix-matched standard. Laser spot size and repetition rate were adapted to match the signal intensities for sample and standard within ±10%. For in situ isotopic analysis, the precision of the δ56Fe values ranged between 0.02 and 0.11‰ (1 SD, based on 4 measurement sessions, each based on ablation along 5 lines for 30 s each) and 0.03-0.17‰ (SD, based on 3 measurement sessions) for glass reference materials and micrometeorites, respectively. Despite this excellent reproducibility, the variation of the isotope ratios along a single ablation line indicated isotopic inhomogeneity exceeding 1‰ in some micrometeorites. Isotopic analysis via pneumatic nebulization MC-ICP-MS, after sample digestion and chromatographic Fe isolation, was performed to validate the results obtained by in situ isotopic analysis, and good agreement was achieved between the δ-values obtained via both approaches and with those reported in literature for MPI-DING and USGS glass reference materials. Also for the glassy cosmic spherules, overall, there was a good match between the ns-LA-MC-ICP-MS and solution MC-ICP-MS results.

Use of radiofrequency power to enable glow discharge optical emission spectroscopy ultrafast elemental mapping of combinatorial libraries with nonconductive components: nitrogen-based materials.

Combinatorial chemistry and high-throughput techniques are an efficient way of exploring optimal values of elemental composition. Optimal composition can result in high performance in a sequence of material synthesis and characterization. Materials combinatorial libraries are typically encountered in the form of a thin film composition gradient which is produced by simultaneous material deposition on a substrate from two or more sources that are spatially separated and chemically different. Fast spatially resolved techniques are needed to characterize structure, composition, and relevant properties of these combinatorial screening samples. In this work, the capability of a glow discharge optical emission spectroscopy (GD-OES) elemental mapping system is extended to nitrogen-based combinatorial libraries with nonconductive components through the use of pulsed radiofrequency power. The effects of operating parameters of the glow discharge and detection system on the achievable spatial resolution were investigated as it is the first time that an rf source is coupled to a setup featuring a push-broom hyperspectral imaging system and a restrictive anode tube GD source. Spatial-resolution optimized conditions were then used to characterize an aluminum nitride/chromium nitride thin-film composition spread. Qualitative elemental maps could be obtained within 16.8 s, orders of magnitude faster than typical techniques. The use of certified reference materials allowed quantitative elemental analysis maps to be extracted from the emission intensity images. Moreover, the quantitative procedure allowed correcting for the inherent emission intensity inhomogeneity in GD-OES. The results are compared to quantitative depth profiles obtained with a commercial GD-OES instrument.

Critical evaluation of the potential of radiofrequency pulsed glow discharge-time-of-flight mass spectrometry for depth-profile analysis of innovative materials.

The combination of radiofrequency pulsed glow discharge (RF-PGD) analytical plasmas with time-of-flight mass spectrometry (TOFMS) has promoted the applicability of this ion source to direct analysis of innovative materials. In this sense, this emerging technique enables multi-elemental depth profiling with high depth resolution and sensitivity, and simultaneous production of elemental, structural, and molecular information. The analytical potential and trends of this technique are critically presented, including comparison with other complementary and well-established techniques (e.g. SIMS, GD-OES, etc.). An overview of recent applications of RF-PGD-TOFMS is given, including analysis of nano-structured materials, coated-glasses, photovoltaic materials, and polymer coatings.

Analytical potential of a laser ablation-glow discharge-optical emission spectrometry system for the analysis of conducting and insulating materials.

The analytical capabilities of a glow discharge (GD) as a secondary source for excitation/ionization of the material provided by laser ablation (LA) have been compared to conventional laser induced breakdown spectroscopy (LIBS). In LA-GD both sources can be independently adjusted to optimize the sampling process and then its subsequent excitation. This could involve a number of analytical performance advantages, such as reduced matrix dependence, greater precision and sensitivity than those encountered in LIBS. For such purpose, an ablation chamber design including two electrodes to generate the GD discharge has been built and assayed. A comparison between LIBS and LA-GD-OES has been carried out, both, under reduced argon and helium atmospheres. Different sets of samples (conducting reference materials, glass and fluorine pellets) have been used to evaluate the novel coupled technique. The LA-GD coupled system has shown to provide lower detection limits. In addition, best linear correlations between intensities and concentrations and lower matrix effects have also been found using the coupled system. Moreover, special advantages of the LA-GD-OES have also been demonstrated for the analysis of fluorine.