Fermented Milk Consumption and Common Infections in Children Attending Day-Care Centers: A Randomized Trial.

OBJECTIVES: This multicenter, double-blind, randomized, placebo-controlled clinical trial investigated the effect of a fermented milk product containing the Lactobacillus casei National Collection of Microorganisms and Cell Cultures (CNCM) I-1518 strain on respiratory and gastrointestinal common infectious diseases (CIDs) in children attending day-care centers in Russia. METHODS: Children ages 3 to 6 years received 100 g of a fermented milk product (n = 300) or a control product (n = 299) twice daily for 3 months, followed by a 1-month observation period. The primary outcome was the incidence of CIDs during the product consumption period. RESULTS: There was no significant difference in the incidence of CIDs between the groups (N = 98 with fermented milk product vs N = 93 with control product). The overall number of CIDs (and no severe cases at all) in both study groups and in all 12 centers, however, was unexpectedly low resulting in underpowering of the study. No differences were found between the groups in the duration or severity of disease, duration of sick leave from day-care centers, parental missed working days, or in quality-of-life dimensions on the PedsQL questionnaire (P > 0.05).There was, however, a significantly lower incidence of the most frequently observed CID, rhinopharyngitis, in children consuming the fermented milk product compared with those consuming the control product (N = 81 vs N = 100, relative risk 0.82, 95% confidence interval 0.69-0.96, P = 0.017) when considering the entire study period. CONCLUSIONS: Although no other significant differences were shown between the fermented milk and control product groups in this study, lower incidence of rhinopharyngitis may indicate a beneficial effect of this fermented milk product.

Thermoresponsive Substrates Used for the Growth and Controlled Differentiation of Human Mesenchymal Stem Cells.

This communication outlines the advances made in the development of thermoresponsive substrates for human mesenchymal stem cell (hMSC) expansion and subsequent controlled specific and multilineage differentiation from a previous study performed by this group. Previously, the development of an inexpensive and technically accessible method for hMSC expansion and harvesting was reported, using the solvent casting deposition method and thermoresponsive poly(N-isopropylacrylamide). Here, the logical continuation of this work is reported with the multipassage expansion of hMSCs with phenotypic maintenance followed by induced adipogenic, osteogenic, and chondrogenic differentiation. Interestingly, 1 µm thick solvent cast films are not only capable of hosting an expanding population of phenotypically preserved hMSCs similar to tissue culture plastic controls, but also the cells detached via temperature control better maintain their ability to differentiate compared to conventionally trypsinized cells. This approach to hMSC expansion and differentiation can be highly attractive to stem cell researchers where clinical therapies have seen a collective deviation away from the employment of animal derived products such as proteolytic trypsin.

Macromolecular crowding transforms regenerative medicine by enabling the accelerated development of functional and truly three-dimensional cell assembled micro tissues.

Scaffold-free in vitro organogenesis exploits the innate ability of cells to synthesise and deposit their own extracellular matrix to fabricate tissue-like assemblies. Unfortunately, cell-assembled tissue engineered concepts require prolonged ex vivo culture periods of very high cell numbers for the development of a borderline three-dimensional implantable device, which are associated with phenotypic drift and high manufacturing costs, thus, hindering their clinical translation and commercialisation. Herein, we report the accelerated (10 days) development of a truly three-dimensional (338.1 ± 42.9 µm) scaffold-free tissue equivalent that promotes fast wound healing and induces formation of neotissue composed of mature collagen fibres, using human adipose derived stem cells seeded at only 50,000 cells/cm2 on an poly (N-isopropylacrylamide-co-N-tert-butylacrylamide (PNIPAM86-NTBA14) temperature-responsive electrospun scaffold and grown under macromolecular crowding conditions (50 µg/ml carrageenan). Our data pave the path for a new era in scaffold-free regenerative medicine.

Thermosensitive hydrogel for prolonged delivery of lentiviral vector expressing neurotrophin-3 in vitro.

BACKGROUND: The development of tissue engineering scaffolds for gene delivery has the potential to enhance gene transfer efficiency and safety via controlled temporal and spatial delivery. Lentiviral delivery can be carried out using the natural biopolymer thermoresponsive gel, chitosan/ß-glycerol phosphate (ß-GP) as a carrier. METHODS: Three chitosan/ß-GP scaffolds were prepared with varying concentrations of chitosan and ß-GP to obtain a pH and gelation temperature suitable for in situ delivery. A lentiviral vector expressing either green fluorescent protein (Lenti GFP) or neurotrophin-3 (Lenti NT-3) was incorporated into the chitosan/ß-GP scaffolds and also into collagen 0.1% w/v (control). Viral elution medium was removed at various timepoints and added to the culture medium of pre-seeded HeLa or primary dorsal root ganglia (DRG) cells, respectively. GFP gene expression was quantified using fluorescence-activated cell sorting analysis. The effect of Lenti NT-3 was analyzed by measuring DRG neurite outgrowth. RESULTS: Collagen displayed its most significant elution of virus on day 1 and chitosan/ß-GP (with a final concentration of 2.17% chitosan) on day 3. CONCLUSIONS: The system shows promise for the in situ, thermoresponsive delivery of lentiviral vectors providing long-term gene expression for therapeutic factors to treat conditions such as injury to the nervous system.

Polarity assessment of thermoresponsive poly(NIPAM-co-NtBA) copolymer films using fluorescence methods.

The in-situ, non-contact, and non-destructive measurement of the physicochemical properties such as the polarity of thin, hydrophilic polymer films is desirable in many areas of polymer science. Polarity is a complex factor and encompasses a range of non-covalent interactions including dipolarity/polarizability and hydrogen bonding. A polarity measurement method based on fluorescence would be ideal, but the key challenge is to identify suitable probes which can accurately measure specific polarity related parameters. In this manuscript we assess a variety of fluorophores for measuring the polarity of a series of relatively hydrophilic, thermoresponsive N-isopropylacrylamide/N-tert-butylacrylamide (NIPAM/NtBA) copolymers. The emission properties of both pyrene and 3-Hydroxyflavone (3-HF) based fluorophores were measured in dry polymer films. In the case of pyrene, a relatively weak, linear relationship between polymer composition and the ratio of the first to the third vibronic band of the emission spectrum (I(1)/I(3)) is observed, but pyrene emission is very sensitive to temperature and thus not suitable for robust polarity measurements. The 3-HF fluorophores which can undergo an excited-state intramolecular proton transfer (ESIPT) reaction have a dual band fluorescence emission that exhibits strong solvatochromism. Here we used 4'-diethylamino-3-hydroxyflavone (FE), 5,6-benzo-4'-diethylamino-3-hydroxyflavone (BFE), and 4 -diethylamino-3-hydroxy-7-methoxyflavone (MFE). The log ratio of the dual band fluorescence emission (log (I(N*)/I(T*))) of 3-HF doped, dry, NIPAM-NtBA copolymer films were found to depend linearly on copolymer composition, with increasing hydrophobicity (greater NtBA fraction) leading to a decrease in the value of log (I(N*)/I(T*)). However, the ESIPT process in the polymer matrix was found to be irreversible, non-equilibrated and occurs over a much longer timescale in comparison to the results previously reported for liquid solvents.

Measuring the micro-polarity and hydrogen-bond donor/acceptor ability of thermoresponsive N-isopropylacrylamide/N-tert-butylacrylamide copolymer films using solvatochromic indicators.

Thin polymer films are important in many areas of biomaterials research, biomedical devices, and biological sensors. The accurate in situ measurement of multiple physicochemical properties of thin polymer films is critical in understanding biocompatibility, polymer function, and performance. In this work we demonstrate a facile spectroscopic methodology for accurately measuring the micro-polarity and hydrogen-bond donor/acceptor ability for a series of relatively hydrophilic thermoresponsive copolymers. The micro-polarity of the N-isopropylacrylamide (NIPAM) and N-tert-butylacrylamide (NtBA) co-polymers was evaluated by means of the E(T)(30), alpha, beta, and pi empirical solvatochromic polarity parameters. The data shows that increasing the NtBA fraction in the dry copolymer film reduces polarity and hydrogen-bonding ability. Within the Kamlet-Taft polarity framework, the NIPAM/NtBA copolymer films are strong hydrogen-bond acceptors, strongly dipolar/polarizable, and rather moderate hydrogen-bond donors. This characterization provides a more comprehensive physicochemical description of polymers, which aids the interpretation of film performance. Comparison of the measured E(T)(30) values with literature data for other water-soluble polymers show that dry NIPAM/NtBA copolymers are slightly more polar than poly(ethylene oxide), less polar than polyvinylalcohol, and approximately the same polarity as poly(N-vinyl-2-pyrrolidone). These findings indicate that this spectroscopic method is a facile, rapid, and nondestructive methodology for measuring polymer properties in situ, suitable for most biomaterials research laboratories.

Cell growth and detachment from protein-coated PNIPAAm-based copolymers.

The cultivation of cells requires the use of unfavorable proteolytic enzymes, which cause cell-surface modification and also need considerable optimization. Recently, with the development of smart polymers, research has looked to using thermoresponsive polymers as cell culture substrates. These novel surfaces allow the cultivation of cells without using enzymes by utilizing the thermoresponsive phase transition property of poly(N-isopropylacrylamide) (PNIPAAm). Copolymers of PNIPAAm and N-tert-butyl-acrylamide (NtBAm) with varying ratios were synthesized and solvent cast. The copolymer films are coated with cell adhesion promoters such as collagen, poly-L-lysine, and laminin to increase their cell adhesion and growth properties. Cell activity measured by the alamarBlue and PicoGreen assays is similar for coated copolymer films and standard tissue culture plastic controls. Deposition of cell adhesion promoters onto the copolymer films was characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Cell detachment from the copolymer films is dependent on copolymer composition and is not affected by the surface coatings of extracellular matrix (ECM) proteins. The results demonstrate a versatile method for the cultivation of cells while eliminating the need for the use of digestive enzymes such as trypsin.

Intact endothelial cell sheet harvesting from thermoresponsive surfaces coated with cell adhesion promoters.

Recently, with the development of smart polymers, research has looked to using thermoresponsive polymers as cell culture substrates. These novel surfaces allow the cultivation of cells without enzymes using the thermoresponsive phase transition property of poly(N-isopropylacrylamide) (PNIPAAm). However, this requires expensive techniques to generate a sufficiently thin film that allows cell adhesion. In this study, we looked at simple solvent cast films which normally show poor cell adhesion, but here the films are coated with cell adhesion promoters (CAPs) to improve cell growth without altering the copolymer thermoresponsive behaviour.A copolymer of PNIPAAm and N-tert-butylacrylamide (NtBAm) with a ratio of 85:15, respectively, was synthesized and solvent cast. The copolymer films were coated with CAPs, such as collagen, fibronectin and laminin, to increase their cell adhesion and growth properties. Cell activity measured by the alamarBlue assay showed similar results for coated copolymer films and standard tissue culture plastic controls. Deposition of CAPs on to the copolymer films was characterized by scanning electron microscopy and atomic force microscopy. Cell detachment from the copolymer films is not affected by the surface coatings of CAPs, and endothelial cells are recovered as an intact sheet, which has great potential for uses in tissue engineering applications. The results demonstrate a versatile method for the cultivation of cells while eliminating the need for the use of digestive enzymes such as trypsin. This study shows that cultivation on physically bonded PNIPAAm copolymers is viable and achievable by relatively simple methods.

Fabrication and Application of Photocrosslinked, Nanometer-Scale, Physically Adsorbed Films for Tissue Culture Regeneration.

This study describes the development and cell culture application of nanometer thick photocrosslinkable thermoresponsive polymer films prepared by physical adsorption. Two thermoresponsive polymers, poly(N-isopropylacrylamide (NIPAm)-co-acrylamidebenzophenone (AcBzPh)) and poly(NIPAm-co-AcBzPh-co-N-tertbutylacrylamide) are investigated. Films are prepared both above and below the polymers' lower critical solution temperatures (LCSTs) and cross-linked, to determine the effect, adsorption preparation temperature has on the resultant film. The films prepared at temperatures below the LCST are smoother, thinner, and more hydrophilic than those prepared above. Human pulmonary microvascular endothelial cell (HPMEC) adhesion and proliferation are superior on the films produced below the polymers LCST compared to those produced above. Cells sheets are detached by simply lowering the ambient temperature to below the LCST. Transmission electron, scanning electron, and light microscopies indicate that the detached HPMEC sheets maintain their integrity.

Adsorption kinetics of NIPAM-based polymers at the air-water interface as studied by pendant drop and bubble tensiometry.

The adsorption of N-isopropylacrylamide (NIPAM) based thermoresponsive polymers at the air-water interface was investigated by using drop and bubble shape tensiometry. The molecular weight dependence of polymer adsorption rate was studied by using narrowly distributed polymer fractions (polydispersity < 1.2) that were prepared by solvent:nonsolvent fractionation. The time-dependent surface tension profiles were fitted to the Hua-Rosen equation and the t values obtained were applied for interpretation of the kinetic data. It was found that the rate of polymer adsorption increased as the molecular weight of the polymer decreased. The relationship between polymer surface concentration and surface tension was determined by applying the pendant drop as a Langmuir-type film balance. From this relationship, the kinetics of polymer adsorption determined experimentally was compared with the adsorption rates predicted by a diffusion-controlled adsorption model based on the Ward-Tordai equation. The predicted adsorption rates were in good agreement with what was found experimentally. The dependence of the adsorption rate on the molecular weight of polymers can be satisfactorily described within the diffusion-controlled model.

Film Thickness Determines Cell Growth and Cell Sheet Detachment from Spin-Coated Poly(N-Isopropylacrylamide) Substrates.

Poly(N-isopropylacrylamide) (pNIPAm) is widely used to fabricate thermoresponsive surfaces for cell sheet detachment. Many complex and expensive techniques have been employed to produce pNIPAm substrates for cell culture. The spin-coating technique allows rapid fabrication of pNIPAm substrates with high reproducibility and uniformity. In this study, the dynamics of cell attachment, proliferation, and function on non-cross-linked spin-coated pNIPAm films of different thicknesses were investigated. The measurements of advancing contact angle revealed increasing contact angles with increasing film thickness. Results suggest that more hydrophilic 50 and 80 nm thin pNIPAm films are more preferable for cell sheet fabrication, whereas more hydrophobic 300 and 900 nm thick spin-coated pNIPAm films impede cell attachment. These changes in cell behavior were correlated with changes in thickness and hydration of pNIPAm films. The control of pNIPAm film thickness using the spin-coating technique offers an effective tool for cell sheet-based tissue engineering.

Accelerated Development of Supramolecular Corneal Stromal-Like Assemblies from Corneal Fibroblasts in the Presence of Macromolecular Crowders.

Tissue engineering by self-assembly uses the cells' secretome as a regeneration template and biological factory of trophic factors. Despite the several advantages that have been witnessed in preclinical and clinical settings, the major obstacle for wide acceptance of this technology remains the tardy extracellular matrix formation. In this study, we assessed the influence of macromolecular crowding (MMC)/excluding volume effect, a biophysical phenomenon that accelerates thermodynamic activities and biological processes by several orders of magnitude, in human corneal fibroblast (HCF) culture. Our data indicate that the addition of negatively charged galactose derivative (carrageenan) in HCF culture, even at 0.5% serum, increases by 12-fold tissue-specific matrix deposition, while maintaining physiological cell morphology and protein/gene expression. Gene analysis indicates that a glucose derivative (dextran sulfate) may drive corneal fibroblasts toward a myofibroblast lineage. Collectively, these results indicate that MMC may be suitable not only for clinical translation and commercialization of tissue engineering by self-assembly therapies, but also for the development of in vitro pathophysiology models.

Macromolecularly crowded in vitro microenvironments accelerate the production of extracellular matrix-rich supramolecular assemblies.

Therapeutic strategies based on the principles of tissue engineering by self-assembly put forward the notion that functional regeneration can be achieved by utilising the inherent capacity of cells to create highly sophisticated supramolecular assemblies. However, in dilute ex vivo microenvironments, prolonged culture time is required to develop an extracellular matrix-rich implantable device. Herein, we assessed the influence of macromolecular crowding, a biophysical phenomenon that regulates intra- and extra-cellular activities in multicellular organisms, in human corneal fibroblast culture. In the presence of macromolecules, abundant extracellular matrix deposition was evidenced as fast as 48 h in culture, even at low serum concentration. Temperature responsive copolymers allowed the detachment of dense and cohesive supramolecularly assembled living substitutes within 6 days in culture. Morphological, histological, gene and protein analysis assays demonstrated maintenance of tissue-specific function. Macromolecular crowding opens new avenues for a more rational design in engineering of clinically relevant tissue modules in vitro.

Poly(N-isopropylacrylamide) co-polymer films as potential vehicles for delivery of an antimitotic agent to vascular smooth muscle cells.

INTRODUCTION: Local delivery of antimitotic agents is a potential therapeutic strategy for protection of injured coronary vasculature against intimal hyperplasia and restenosis. This study sought to establish the principle that thermoresponsive poly(N-isopropylacrylamide) co-polymer films can be used to deliver, in a controlled manner, an antimitotic agent to vascular smooth muscle cells (VSMC). METHODS: A series of co-polymer films was prepared, using varying ratios (w/w) of N-isopropylacrylamide (NiPAAm) monomer to N-tert-butylacrylamide (NtBAAm) and loaded with the antimitotic agent colchicine (100 nmol/film) at room temperature. RESULTS: The extent of colchicine release at 37 degrees C was inversely proportional to the amount of NtBAAm in co-polymer films: release after 48 h from 85:15, 65:35 and 50:50 (NiPAAm:NtBAAm) films was 26, 17 and 0.5 nmol, respectively. In cytotoxicity studies, when medium incubated with co-polymers for 24 h (in the absence of colchicine) was further incubated with target bovine aortic smooth muscle cells (BASMC), no loss of cell viability occurred. Colchicine released from all three co-polymer films significantly inhibited proliferation and random migration of BASMC: 100 nM colchicine (released from 65:35 NiPAAm:NtBAAm) reduced cell proliferation to 25.7+/-1.7% of levels seen in the absence of colchicine (control) and random cell migration to 37.7+/-5.7% of control (mean+/-S.E.M., n = 3, P < .01 and P < .05, respectively). The magnitudes of these effects were comparable to those seen in separate experiments with native colchicine and were observed in samples of released colchicine which had been stored at -20 degrees C for up to 6 months. CONCLUSIONS: This study has shown that the release of the antimitotic agent colchicine, from NiPAAm/NtBAAm co-polymer films can be manipulated by changes in co-polymer composition. Furthermore, such drug released at 37 degrees C retains comparable bioactivity to that of native colchicine.

Macrophages behavior on different NIPAm-based thermoresponsive substrates.

Thermoresponsive materials and surfaces are widely used in cell culture applications. There is a lot of research work employing thermoresponsive materials with various structure and compositions. However, little is known about the immunological response to the thermoresponsive materials. Macrophage-like transformed murine cell line RAW264.7 was selected as it is a widely used standard model for immune activation analysis. This study proposes to compare the effects of thermoresponsive films with various compositions on macrophage cells. Thermoresponsive materials are a useful utility as a non-enzymatic harvesting system for tissue culture. As RAW264.7 cells are difficult to remove from the substrate by enzymatic methods we also explored the possibility to use thermoresponsive materials for the macrophage cultivation. Spin coating and solvent casting was used to produce films of N-isopropylacrylamide-based polymers from the nanometer to micrometer range. Successful cell adhesion and proliferation was highly dependent on the thickness and composition of the coating. RAW264.7 cells were successfully detached from the coatings upon temperature reduction. Furthermore, results indicate that the RAW264.7 cells remained inactivated as cell secreted cytokine remained at a low level and the surface receptor profile of RAW264.7 was not altered when cells were detached in this manner.

Macromolecular crowding meets tissue engineering by self-assembly: a paradigm shift in regenerative medicine.

MMC, the addition of inert polydispersed macromolecules in the culture media, effectively emulates the dense in vivo extracellular space, resulting in amplified deposition of ECM in vitro and subsequent production of cohesive, ECM-rich living substitutes.

An implantable thermoresponsive drug delivery system based on Peltier device.

Locally dropping the temperature in vivo is the main obstacle to the clinical use of a thermoresponsive drug delivery system. In this paper, a Peltier electronic element is incorporated with a thermoresponsive thin film based drug delivery system to form a new drug delivery device which can regulate the release of rhodamine B in a water environment at 37 °C. Various current signals are used to control the temperature of the cold side of the Peltier device and the volume of water on top of the Peltier device affects the change in temperature. The pulsatile on-demand release profile of the model drug is obtained by turning the current signal on and off. The work has shown that the 2600 mAh power source is enough to power this device for 1.3 h. Furthermore, the excessive heat will not cause thermal damage in the body as it will be dissipated by the thermoregulation of the human body. Therefore, this simple novel device can be implanted and should work well in vivo.

Thermoresponsive substrates used for the expansion of human mesenchymal stem cells and the preservation of immunophenotype.

The facile regeneration of undifferentiated human mesenchymal stem cells (hMSCs) from thermoresponsive surfaces facilitates the collection of stem cells avoiding the use of animal derived cell detachment agents commonly used in cell culture. This communication proposes a procedure to fabricate coatings from commercially available pNIPAm which is both affordable and a significant simplification on alternative approaches used elsewhere. Solvent casting was used to produce films in the micrometer range and successful cell adhesion and proliferation was highly dependent on the thickness of the coating produced with 1 µm thick coatings supporting cells to confluence. 3T3 cell sheets and hMSCs were successfully detached from the cast coatings upon temperature reduction. Furthermore, results indicate that the hMSCs remained undifferentiated as the surface receptor profile of hMSCs was not altered when cells were detached in this manner.

Synthesis and characterization of a novel thermoresponsive copolymer series and their application in cell and cell sheet regeneration.

A series of poly-(N-isopropyl acrylamide)-based copolymers were developed with a view to biomedical applications, specifically cell cultivation and recovery. Ethylpyrrolidone methacrylate (EPM), the monomer of poly-(ethylpyrrolidone methacrylate) (pEPM), which is itself thermoresponsive, was copolymerized with N-isopropylacrylamide in varying ratios to create this novel thermoresponsive copolymer series. Characterization indicated a moderate increase of copolymer lower critical solution temperature with increasing EPM content. Films of the copolymers successfully hosted cells to monolayer. Cells detached from the copolymers upon temperature reduction with cell to cell junctions maintained, avoiding the damage which can be caused using conventional detachment techniques. These results indicate that these copolymers are highly cell compatible and may be useful for a range of biomedical applications.

A mathematical model for pulsatile release: controlled release of rhodamine B from UV-crosslinked thermoresponsive thin films.

A controlled drug delivery system fabricated from a thermoresponsive polymer was designed to obtain a pulsatile release profile which was triggered by altering the temperature of the dissolution medium. Two stages of release behaviour were found: fast release for a swollen state and slow (yet significant and non-negligible) release for a collapsed state. Six cycles of pulsatile release between 4 °C and 40 °C were obtained. The dosage of drug (rhodamine B) released in these cycles could be controlled to deliver approximately equal doses by altering the release time in the swollen state. However, for the first cycle, the swollen release rate was found to be large, and the release time could not be made short enough to prevent a larger dose than desired being delivered. A model was developed based on Fick's law which describes pulsatile release mathematically for the first time, and diffusion coefficients at different temperatures (including temperatures corresponding to both the fully swollen and collapsed states) were estimated by fitting the experimental data with the theoretical release profile given by this model. The effect of temperature on the diffusion coefficient was studied and it was found that in the range of the lower critical solution temperature (LCST), the diffusion coefficient increased with decreasing temperature. The model predicts that the effective lifetime of the system lies in the approximate range of 1-42 h (95% of drug released), depending on how long the system was kept at low temperature (below the LCST). Therefore this system can be used to obtain a controllable pulsatile release profile for small molecule drugs thereby enabling optimum therapeutic effects.