RESUMEN
Photocatalytic reduction of 4-nitrophenol (4-NP) for converting it to nontoxic 4-aminophenol (4-AP) is one of the most efficient approaches for removing toxic 4-NP. Using porous organic polymers (POPs) as the support to immobilize noble metal catalysts has exhibited remarkable reduction performance but is rarely reported. Herein, a cationic triphenylamine-based POP was synthesized by quaternization to immobilize PtCl62- to prepare an efficient photocatalyst named DCM-TPA-Pt for the reduction of 4-NP to 4-AP in the presence of NaBH4. Different from reported methods which realize immobilization by doping or complexing, the support and PtCl62- are combined through electrostatic interaction with milder reaction conditions to produce a photocatalyst in this work. DCM-TPA-Pt shows excellent photocatalytic reduction performance, reaching 99.9% conversion within 3 min, and its pseudo-first-order constant is 0.0305 s-1, surpassing most of the reported photocatalysts. Moreover, DCM-TPA-Pt also exhibits equal reduction efficiency after five continuous cycles, which highlights its potential utilization in practical applications.
RESUMEN
Integrating a biomimetic extracellular matrix to improve the microenvironment of 3D printing scaffolds is an emerging strategy for bone substitute design. Here, a "soft-hard" bone implant (BM-g-DPCL) consisting of a bioactive matrix chemically integrated on a polydopamine (PDA)-coated porous gradient scaffold by polyphenol groups is constructed. The PDA-coated "hard" scaffolds promoted Ca2+ chelation and mineral deposition; the "soft" bioactive matrix is beneficial to the migration, proliferation, and osteogenic differentiation of stem cells in vitro, accelerated endogenous stem cell recruitment, and initiated rapid angiogenesis in vivo. The results of the rabbit cranial defect model (Φ = 10 mm) confirmed that BM-g-DPCL promoted the integration between bone tissue and implant and induced the deposition of bone matrix. Proteomics confirmed that cytokine adhesion, biomineralization, rapid vascularization, and extracellular matrix formation are major factors that accelerate bone defect healing. This strategy of highly chemically bonded soft-hard components guided the construction of the bioactive regenerative scaffold.
Asunto(s)
Osteogénesis , Andamios del Tejido , Animales , Conejos , Porosidad , Biomimética , Remodelación ÓseaRESUMEN
Deep red/near-infrared (NIR, >650â nm) emissive organic luminophores with aggregation-induced emission (AIE) behaviours have emerged as promising candidates for applications in optoelectronic devices and biological fields. However, the molecular design philosophy for AIE luminogens (AIEgens) with narrow band gaps are rarely explored. Herein, we rationally designed two red organic luminophores, FITPA and FIMPA, by considering the enlargement of transition dipole moment in the charge-transfer state and the transformation from aggregation-caused quenching (ACQ) to AIE. The transition dipole moments were effectively enhanced with a "V-shaped" molecular configuration. Meanwhile, the ACQ-to-AIE transformation from FITPA to FIMPA was induced by a methoxy-substitution strategy. The experimental and theoretical results demonstrated that the ACQ-to-AIE transformation originated from a crystallization-induced emission (CIE) effect because of additional weak interactions in the aggregate state introduced by methoxy groups. Owing to the enhanced transition dipole moment and AIE behaviour, FIMPA presented intense luminescence covering the red-to-NIR region, with a photoluminescence quantum yield (PLQY) of up to 38 % in solid state. The promising cell-imaging performance further verified the great potential of FIMPA in biological applications. These results provide a guideline for the development of red and NIR AIEgens through comprehensive consideration of both the effect of molecular structure and molecular interactions in aggregate states.
RESUMEN
Nanoparticles (NPs) transfer is usually induced by adding ligands to modify NP surfaces, but aggregation of NPs oftentimes hampers the transfer. Here, we show that aggregation during NP phase transfer does not necessarily result in transfer failure. Using a model system comprising gold NPs and amphiphilic polymers, we demonstrate an unusual mechanism by which NPs can undergo phase transfer from the aqueous phase to the organic phase via a single-aggregation-single pathway. Our discovery challenges the conventional idea that aggregation inhibits NP transfer and provides an unexpected pathway for transferring larger-sized NPs (>20â nm). The charged amphiphilic polymers effectively act as chaperons for the NP transfer and offer a unique way to manipulate the dispersion and distribution of NPs in two immiscible liquids. Moreover, by intentionally jamming the NP-polymer assembly at the liquid/liquid interface, the transfer process can be inhibited.
RESUMEN
Stabilizing liquids based on supramolecular assembly (non-covalent intermolecular interactions) has attracted significant interest, due to the increasing demand for soft, liquid-based devices where the shape of the liquid is far from the equilibrium spherical shape. The components comprising these interfacial assemblies must have sufficient binding energies to the interface to prevent their ejection from the interface when the assemblies are compressed. Here, we highlight recent advances in structuring liquids based on non-covalent intermolecular interactions. We describe some of the progress made that reveals structure-property relationships. In addition to treating advances, we discuss some of the limitations and provide a perspective on future directions to inspire further studies on structured liquids based on supramolecular assembly.
RESUMEN
To better exploit all-liquid 3D architectures, it is essential to understand dynamic processes that occur during printing one liquid in a second immiscible liquid. Here, the interfacial assembly and transition of 5,10,15,20-tetrakis(4-sulfonatophenyl) porphyrin (H6 TPPS) over time provides an opportunity to monitor the interfacial behavior of nanoparticle surfactants (NPSs) during all-liquid printing. The formation of J-aggregates of H4 TPPS2- at the interface and the interfacial conversion of the J-aggregates of H4 TPPS2- to H-aggregates of H2 TPPS4- is demonstrated by interfacial rheology and in situ atomic force microscopy. Equally important are the chromogenic changes that are characteristic of the state of aggregation, where J-aggregates are green in color and H-aggregates are red in color. In all-liquid 3D printed structures, the conversion in the aggregate state with time is reflected in a spatially varying change in the color, providing a simple, direct means of assessing the aggregation state of the molecules and the mechanical properties of the assemblies, linking a macroscopic observable (color) to mechanical properties.
Asunto(s)
Porfirinas , Porfirinas/química , Reología , Tensoactivos/químicaRESUMEN
With the interfacial jamming of nanoparticles (NPs), a load-bearing network of NPs forms as the areal density of NPs increases, converting the assembly from a liquid-like into a solid-like assembly. Unlike vitrification, the lineal packing of the NPs in the network is denser, while the remaining NPs can remain in a liquid-like state. It is a challenge to determine the point at which the assemblies jam, since both jamming and vitrification lead to a solid-like behavior of the assemblies. Herein, we show a real-time fluorescence imaging method to probe the evolution of the interfacial dynamics of NP surfactants at the water/oil interface using aggregation-induced emission (AIE) as a reporter for the transition of the assemblies into the jammed state. The AIEgens show typical fluorescence behavior at densities at which they can move and rotate. However, when aggregation of these fluorophores occurs, the smaller intermolecular separation distance arrests rotation, and a significant enhancement in the fluorescence intensity occurs.
RESUMEN
Locking nonequilibrium shapes of liquids into targeted architectures by interfacial jamming of nanoparticles is an emerging area in material science. 5,10,15,20-tetrakis(4-sulfonatophenyl) porphyrin (H6 TPPS) shows three different aggregation states that present an absorption imaging platform to monitor the assembly and jamming of supramolecular polymer surfactants (SPSs) at the liquid/liquid interface. The interfacial interconversion of H6 TPPS, specifically H4 TPPS2- dissolved in water, from J- to an H-aggregation was induced by strong electrostatic interactions with amine-terminated polystyrene dissolved in toluene at the water/toluene interface. This resulted in color-tunable liquids due to interfacial jamming of the SPSs formed between H4 TPPS2- and amine-terminated polystyrene. However, the formed SPSs cannot lock in nonequilibrium shapes of liquids. In addition, a self-wrinkling behavior was observed when amphiphilic triblock copolymers of PS-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) were used to interact with H4 TPPS2- . Subsequently, the SPSs formed can lock in nonequilibrium shapes of liquids.
RESUMEN
Soft polymeric Janus nanoparticles (JNPs), made from polystyrene-b-poly(butadiene)-b-poly(methylmethacrylate), PS-PB-PMMA, triblock terpolymers, assemble into a monolayer at the water-oil interface to reduce interfacial tension. The extent to which the polymer chains can deform influences the packing density of the JNPs at the interface. The longer the polymer chains are relative to the core, the softer are the JNPs, resulting in a JNPs assembly with a lower initial lateral packing density. The interfacial activity of JNPs can be further tuned by complexation of the PMMA chains with lithium ions that are introduced into the water phase. This work provides a fundamental understanding of soft JNPs packing at the water-oil interface and provides a strategy to tailor the areal density of soft JNPs at liquid-liquid interface, enabling the design of smart responsive structured-liquid systems.
RESUMEN
The strong electrostatic interactions at the oil-water interface between a small molecule, 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin, H6 TPPS, dissolved in water, and an amine terminated hydrophobic polymer dissolved in oil are shown to produce a supramolecular polymer surfactant (SPS) of H6 TPPS at the interface with a binding energy that is sufficiently strong to allow an intermolecular aggregation of the supramolecular polymers. SPSs at the oil-water interface are confirmed by inâ situ real-space atomic force microcopy imaging. The assemblies of these aggregates can jam at the interface, opening a novel route to kinetically trap the liquids in non-equilibrium shapes. The elastic film, comprised of SPSs, wrinkles upon compression, providing a strategy to stabilize liquids in non-equilibrium shapes.
RESUMEN
The diverse functionalities of large N-heteroacenes continue to be developed in terms of their strategic synthesis and application in the organic electronic field. Here, we report a novel large stable pyrene-containing N-heteroacene with ten linearly-annulated rings in one row. Remarkably, it exhibited excellent tri-state resistive memory property, which held great promise to achieve ultrahigh-density data storage. To the best of our knowledge, it is the first demonstration of organic multistate memory device based on large N-heteroacene (n≥10), which provides guidelines for designing more proof-of-concept larger N-heteroacene-based memory electronics.
RESUMEN
The molecular-level motions of a coronene-based supramolecular rotator are amplified into macroscopic changes of crystals by co-assembly of coronene and TCNB (1,2,4,5-tetracyanobenzene) into a charge-transfer complex. The as-prepared cocrystals show remarkable self-healing behavior and thermo-mechanical responses during thermally-induced reversible single-crystal-to-single-crystal (SCSC) phase transitions. Comprehensive analysis of the microscopic observations as well as differential scanning calorimetry (DSC) measurements and crystal habits reveal that a thermally-reduced-rate-dependent dynamic character exists in the phase transition. The crystallographic studies show that the global similarity of the packing patterns of both phases with local differences, such as molecular stacking sequence and orientations, should be the origin of the self-healing behavior of these crystals.
RESUMEN
Realizing the control of emission colors of single molecules is very important in the development of full-color emitting materials. Herein, three novel phenazine derivatives (2,3,7,8-tetrakis(decyloxy)phenazine (2a), 2,3-didecyloxy-5,14-diaza-7,12-dioxo-9,10- dicyanopentacene (2b), and 2,3,13,14-tetradecyloxy-5,11,16,22-tetraaza-7,9,18,20-tetraoxo-8,19-dicyanoenneacene (2c)) have been successfully synthesized and fully characterized. Compound 2c can emit blue light in toluene solution (450 nm), green light in the powder/film state (502/562 nm), and red light in the 2c/TFA state (610 nm). The OLED with 2c emits a strong green light at a peak of 536 nm with a maximum luminance of the OLED of about 8600 cd m(-2), which indicates that 2c could be a promising fluorescent dye for OLED applications.
RESUMEN
Described here is a visible-light-promoted cascade carboxylation/arylation of indole-tethered unactivated alkenes with CO2 to access various carboxylated indole-fused heterocycles. This reaction is initiated by the addition of a CO2 radical anion to the alkene motif toward an alkyl carbon radical, followed by its addition to the aromatic ring, and then rearomatization to afford the final products. This reaction provides a facile and sustainable protocol for the construction of carboxylated indole-fused heterocycles using CO2 as the carboxylic source.
RESUMEN
A BODIPY-containing conjugated microporous polymer (CMP, LBFD-1) was modified with calixarene to develop a hydrophilic CMP (LBFD-2) with broader absorption extending to the near-infrared-II region. LBFD-2 exhibited an H2O2 production rate of 2.14 mmol g-1 h-1 in the air without any sacrificial agents. The removal efficiency (η) of LBFD-2 towards methylene blue and rhodamine B reached >99.5% within 20 and 40 min in light. LBFD-2 can withstand diverse environmental changes, showing excellent reusability and potential for practical applications in real-water systems.
RESUMEN
Pyrophosphoric acid (PPi) is a crucial indicator for monitoring adenosine triphosphate hydrolysis processes, and abnormal PPi levels in the human body seriously threaten human health. Thus the efficient detection of the concentration of PPi in the aqueous solution is important and urgent. This paper described the successful synthesis of a tetraphenylethylene (TPE) derivative, named as TPE-4B, which contained four chelate pyridinium groups exhibiting aggregation-induced emission characteristics. TPE-4B was explicitly developed for the selective and sensitive fluorescence detection of PPi in aqueous solutions, showing a fluorescence "turn-on" response, and the detection limit was 65 nM. The four chelate pyridinium moieties of TPE-4B exhibited robust electrostatic interactions and binding capacity towards PPi, leading to the formation of aggregations, which was confirmed by zeta potential, dynamic light scattering, and scanning electron microscopy. Compared with free TPE-4B in the aqueous solution, the zeta potential of aggregations decreased from 20.7 to 4.2 mV, the average diameter increased from 155 to 403 nm, and the morphology transformed from porous nanostructures into a block-like format. Leveraging these properties, TPE-4B is a promising candidate for a "turn-on" fluorescence sensor designed to detect PPi in the aqueous solution.
RESUMEN
Bone regenerative scaffolds with a bionic natural bone hierarchical porous structure provide a suitable microenvironment for cell migration and proliferation. Here, a bionic scaffold (DP-PLGA/HAp) with directional microchannels is prepared by combining 3D printing and directional freezing technology. The 3D printed framework provides structural support for new bone tissue growth, while the directional pore embedded in the scaffolds provides an express lane for cell migration and nutrition transport, facilitating cell growth and differentiation. The hierarchical porous scaffolds achieve rapid infiltration and adhesion of bone marrow mesenchymal stem cells (BMSCs) and improve the expression of osteogenesis-related genes. The rabbit cranial defect experiment presents significant new bone formation, demonstrating that DP-PLGA/HAp offers an effective means to guide cranial bone regeneration. The combination of 3D printing and directional freezing technology might be a promising strategy for developing bone regenerative biomaterials.
Asunto(s)
Regeneración Ósea , Células Madre Mesenquimatosas , Osteogénesis , Impresión Tridimensional , Andamios del Tejido , Regeneración Ósea/fisiología , Animales , Conejos , Andamios del Tejido/química , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/metabolismo , Osteogénesis/efectos de los fármacos , Osteogénesis/fisiología , Porosidad , Diferenciación Celular , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Ingeniería de Tejidos/métodos , Proliferación Celular , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Durapatita/químicaRESUMEN
This study introduces a self-driven system that effectively achieves synchronized sulfur recovery and hydrogen production using a Zn-air battery. The system ingeniously integrates the sulfur oxidation reaction (SOR) and the hydrogen evolution reaction (HER) into a single, efficient process. Central to this system is the trifunctional phosphorus-doped cobalt molybdate catalyst (P-CoMoO4/NF), which exhibits superior performance in both HER (ηj = 100 = 0.13 V) and SOR (ηj = 100 = 0.30 V) with remarkable stability (â¼360 h), reaching 0.64 V at 100 mA cm-2 for simultaneous sulfur ion degradation and hydrogen production. Through density functional theory simulations and extensive characterizations, it has been shown that phosphorus doping in the cobalt molybdate catalyst facilitates electron redistribution, enhancing the catalyst's conductivity, generating more oxygen vacancies, and promoting improved mass and electron transfer. This modification also lowers the energy barrier for adsorbing reaction intermediates, thus increasing the hydrogen production rate and sulfur oxide conversion in this self-powered system. In summary, this research marks a substantial advancement in the development of trifunctional catalysts and proposes an eco-friendly, cost-effective strategy for integrated reaction systems, paving the way for sustainable energy solutions.
RESUMEN
Organic photothermal materials based on conjugated structures have significant potential applications in areas such as biomedical diagnosis, therapy, and energy conversion. Improving their photothermal conversion efficiency through molecular design is critical to promote their practical applications. Especially in similar structures, understanding how the position of heteroatoms affects the conversion efficiency is highly desirable. Herein, we prepared two isomeric small D-A molecules with different sulfur atom positions (TBP-MPA and i-TBP-MPA), which display strong and broad absorption in the UV-visible region due to their strong intramolecular charge transfer characteristics. Compared to i-TBP-MPA, TBP-MPA demonstrates aggregation-induced photothermal enhancement (AIPE). Under simulated sunlight (1 kW m-2) irradiation, the stable temperature of TBP-MPA powder reached 60 °C, significantly higher than the 50 °C achieved by i-TBP-MPA. Experimental and theoretical results indicate that the Sâ¯N non-covalent interactions in TBP-MPA impart a more rigid conjugated framework to the molecule, inducing ordered molecular stacking during aggregation. This ordered stacking provides additional non-radiative transition channels between TBP-MPA molecules, enhancing their photothermal performance in the aggregated state. Under 1 sun irradiation, TBP-MPA achieved a water evaporation rate of 1.0 kg m-2 h-1, surpassing i-TBP-MPA's rate of 0.92 kg m-2 h-1.
RESUMEN
Structural and physiological cues provide guidance for the directional migration and spatial organization of endogenous cells. Here, a microchannel scaffold with instructive niches is developed using a circumferential freeze-casting technique with an alkaline salting-out strategy. Thereinto, polydopamine-coated nano-hydroxyapatite is employed as a functional inorganic linker to participate in the entanglement and crystallization of chitosan molecules. This scaffold orchestrates the advantage of an oriented porous structure for rapid cell infiltration and satisfactory immunomodulatory capacity to promote stem cell recruitment, retention, and subsequent osteogenic differentiation. Transcriptomic analysis as well as its in vitro and in vivo verification demonstrates that essential colony-stimulating factor-1 (CSF-1) factor is induced by this scaffold, and effectively bound to the target colony-stimulating factor-1 receptor (CSF-1R) on the macrophage surface to activate the M2 phenotype, achieving substantial endogenous bone regeneration. This strategy provides a simple and efficient approach for engineering inducible bone regenerative biomaterials.