Ozone therapy effect in medication-related osteonecrosis of the jaw as prevention or treatment: microtomographic, confocal laser microscopy and histomorphometric analysis.

OBJECTIVE: This study aimed to evaluate the efficacy of ozone therapy in the preoperative (prevention) and/or postoperative (treatment) of MRONJ. MATERIAL AND METHODS: Forty male Wistar rats were caudally treated with zoledronic acid (ZOL) and to ozone therapy before extraction (prevention, POG), after extraction (treatment, TOG), or both (prevention and treatment, TPOG), and treated with saline (SAL). The animals received intramuscular fluorochrome (calcein and alizarin), and 28 days postoperatively, they were euthanized, and the tissues were subjected to microtomographic computed tomography (microCT), LASER confocal, and histomorphometric analyses. RESULTS: Micro-CT showed a higher bone volume fraction average in all groups than that in the ZOL group (P < 0.001), the ZOL group showed high porosity (P = 0.03), and trabecular separation was greater in the TOG group than in the POG group (P < 0.05). The mineral apposition rate of the POG group was high (20.46 ± 6.31) (P < 0.001), followed by the TOG group (20.32 ± 7.4). The TOG group presented the highest mean newly formed bone area (68.322 ± 25.296) compared with the ZOL group (P < 0.05), followed by the SAL group (66.039 ± 28.379) and ZOL groups (60.856 ± 28.425). CONCLUSIONS: Ozone therapy modulated alveolar bone repair in animals treated with ZOL, mainly after surgery trauma, leading to bone formation as healing tissue. CLINICAL RELEVANCE: Osteonecrosis has been a challenge in dentistry, and owing to the lack of a consensus regarding therapy, studies presenting new therapies are important, and ozone has been one of the therapies explored empirically.

A regenerative approach for temporomandibular joint repair: An in vitro and ex vivo study.

BACKGROUND: Current clinical approaches to regenerate temporomandibular joint (TMJ) articulating cartilage defects only treat the symptoms (i.e. pain and dysfunction) and do not seek to restore joint integrity for long-term relief. Therefore, we investigated a novel self-assembling tissue-engineered cartilage to overcome this significant clinical issue for TMJ regenerative purposes. OBJECTIVES: Examine the maturation of dynamic self-regenerating cartilage (dSRC) using auricular chondrocytes and evaluate a novel combinatorial approach with fractional laser treatment and dSRC implantation for TMJ cartilage repair. MATERIALS AND METHODS: A suspension of 107 freshly harvested rabbit ear chondrocytes was cultured under a continuous reciprocating motion to form the dSRC. After 2, 4 and 8 weeks of culture, dSRC samples were stained with H&E, Safranin-O and Toluidine Blue. Immunohistochemistry (IHC) was performed for collagens type I and II. Channels (300-500 µm diameter and 1.2-1.5 mm depth) were created in six freshly harvested condyles using a fractional Erbium laser. Two groups were tested: dSRC in a laser-ablated lesion (experimental) and an empty laser-ablated channel (control). TMJ condyles were cultured for up to 8 weeks and analysed as described above. RESULTS: H&E staining showed a high cell density in dSRC compared to native cartilage. All dSRC groups demonstrated intense Safranin-O staining, indicating high glycosaminoglycan (GAG) production and intense Toluidine Blue staining showed high proteoglycan content. IHC confirmed that dSRC consisted predominantly of collagen type II. The experimental group showed improved cartilage repair at both time points compared to the empty channels. CONCLUSION: dSRC viability and successful matrix formation were demonstrated in vitro. The combination of fractional laser ablation and dSRC implantation enhanced cartilage repair.

Orthobiologics in delayed union and non-union of adult long bones fractures: A systematic review.

Background: Fracture healing poses a significant challenge in orthopedics. Successful regeneration of bone is provided by mechanical stability and a favorable biological microenvironment. This systematic review aims to explore the clinical application of orthobiologics in treating aseptic delayed union and non-union of long bones in adults. Methods: A systematic review was conducted following the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) guidelines. Three databases were explored, with no date restrictions, using keywords related to orthobiologics and delayed union and non-union. Eligible studies included human clinical studies in English, with available full texts, examining orthobiologics such as platelet-rich plasma (PRP), mesenchymal stem cells (MSCs), and bone morphogenetic protein (BMPs) for treating aseptic delayed unions and non-unions in adults. Animal studies, in vitro research, and studies on non-unions due to congenital defects, tumors or infections were excluded. Results: The initial search identified 9417 studies, with 20 ultimately included in the review. These studies involved 493 patients affected by non-union and 256 patients affected by delayed union, with an average age respectively of 40.62 years and 41.7 years. The mean follow-up period was 15.55 months for non-unions and 8.07 months for delayed unions. PRP was the most used orthobiologic, and outcomes were evaluated through time to union, functional scores, and clinical examinations. The results indicated that orthobiologics, especially PRP, tended to yield better outcomes compared to surgical procedures without biological factors. Conclusion: This systematic review suggests that orthobiologics, such as PRP, BMPs, and MSCs, can be effective and safe in the management of delayed union and non-union fractures. These biological treatments have the potential to improve union rates, reduce healing times, and enhance functional outcomes in patients with non-union fractures. Further research is essential to refine treatment protocols and determine the most suitable orthobiologic for specific patient populations and fracture types.

The influence of electrical high-speed rotation on mandibular third molar surgeries: a prospective, randomized, split-mouth clinical and radiographic study.

The aim of this split-mouth randomized clinical trial was to evaluate the clinical outcomes (operative time, edema, trismus, and pain), the immediate histological effects, the alveolar repair (2 and 4 months), and the quality of life after the extraction of impacted third molars using high-speed pneumatic and electrical rotation. Sixteen patients underwent extraction of the two mandibular third molars with a minimum interval of 15 days. On one side of the participant's mouth, high-speed pneumatic rotation was used (Control Group-CG) while for the other side, high-speed electrical rotation was used (Study Group-SG). Statistical analysis included ANOVA repeated measures and Pearson correlations. SG group showed: shorter operative time (p = 0.019), less pain (p = 0.034), swelling (p < 0.001) and trismus (p = 0.025) on the 1st postoperative day; less pain (p = 0.034) and trismus (p = 0.010) on the 3rd postoperative day; less trismus (p = 0.032) on the 7th postoperative day; and better quality of life (p = 0.007). No differences were observed for peripheral bone damage or bone density of alveolar repair at 2 and 4 months between groups. Electric high-speed rotation provided better postoperative clinical parameters of pain, edema and trismus when compared with pneumatic high-speed rotation for mandibular third molar surgery.Trial registration: Brazilian Registry of Clinical Trials registration number RBR-4xyqhqm ( https://ensaiosclinicos.gov.br/rg/RBR-4xyqhqm ).

Rodents as an animal model for studying tooth extraction-related medication-related osteonecrosis of the jaw: assessment of outcomes.

OBJECTIVE: To assess the outcomes of several rodent animal models for studying tooth extraction-related medication-related osteonecrosis of the jaw (MRONJ). DESIGN: After a search of the databases, 2004 articles were located, and 118 corroborated the inclusion factors (in vivo studies in rodents evaluating tooth extraction as a risk factor for the development of MRONJ). RESULTS: Numerous studies attempting to establish an optimal protocol to induce MRONJ were found. Zoledronic acid (ZA) was the most used drug, followed by alendronate (ALN). Even when ZA did not lead to the development of MRONJ, its effect compromised the homeostasis of the bone and soft tissue. The association of other risk factors (dexamethasone, diabetes, and tooth-related inflammatory dental disease) besides tooth extraction also played a role in the development of MRONJ. In addition, studies demonstrated a relationship between cumulative dose and MRONJ. CONCLUSIONS: Both ZA and ALN can lead to MRONJ in rodents when equivalent human doses (in osteoporosis or cancer treatment) are used. Local oral risk factors and tooth-related inflammatory dental disease increase the incidence of MRONJ in a tooth extraction-related rodent model.

Early Peri-Implant Bone Healing on Laser-Modified Surfaces with and without Hydroxyapatite Coating: An In Vivo Study.

(1) Objective: The aim of this study was to assess the biological behavior of bone tissue on a machined surface (MS) and modifications made by a laser beam (LS) and by a laser beam incorporated with hydroxyapatite (HA) using a biomimetic method without thermic treatment (LHS). (2) Methods: Scanning electron microscopy coupled with energy-dispersive X-ray spectrometry (SEM/EDX) was performed before and after installation in the rabbit tibiae. A total of 20 Albinus rabbits randomly received 30 implants of 3.75 × 10 mm in the right and left tibias, with two implants on each surface in each tibia. In the animals belonging to the 4-week euthanasia period group, intramuscular application of the fluorochromes calcein and alizarin was performed. In implants placed mesially in the tibiofemoral joint, biomechanical analysis was performed by means of a removal torque (N/cm). The tibias with the implants located distally to the joint were submitted for analysis by confocal laser microscopy (mineral apposition rate) and for histometric analysis by bone contact implant (%BIC) and newly formed bone area (%NBA). (3) Results: The SEM showed differences between the surfaces. The biomechanical analysis revealed significant differences in removal torque values between the MSs and LHSs over a 2-week period. Over a 4-week period, both the LSs and LHSs demonstrated removal torque values statistically higher than the MSs. BIC of the LHS implants were statistically superior to MS at the 2-week period and LHS and LS surfaces were statistically superior to MS at the 4-week period. Statistical analysis of the NBA of the implants showed difference between the LHS and MS in the period of 2 weeks. (4) Conclusions: The modifications of the LSs and LHSs provided important physicochemical modifications that favored the deposition of bone tissue on the surface of the implants.

Bone Incorporation of a Poly (L-Lactide-Co-D, L-Lactide) Internal Fixation Device in a Rat's Tibia: Microtomographic, Confocal LASER, and Histomorphometric Analysis.

This study evaluated the bone incorporation process of a screw-shaped internal fixation device made of poly (L-lactide-co-D, L-lactide) (PLDLLA). Thirty-two male Wistar rats received 32 fixation devices (2 mm × 6 mm) randomly assigned to either the right or left tibia and one implant in each animal. After 7, 14, 28, and 42 days, the rats were euthanized and the specimens were subjected to microtomographic computed tomography (microCT) and histomorphometric analyses to evaluate bone interface contact (BIC%) and new bone formation (NBF%) in cortical and cancellous bone areas. The animals euthanized on days 28 and 42 were treated with calcein and alizarin red, and confocal LASER microscopy was performed to determine the mineral apposition rate (MAR). Micro-CT revealed a higher percentage of bone volume (p < 0.006), trabecular separation (p < 0.001), and BIC in the cortical (p < 0.001) and cancellous (p = 0.003) areas at 28 and 42 days than at 7 and 14 days. The cortical NBF at 42 days was greater than that at 7 and 14 days (p = 0.022). No statistically significant differences were observed in cancellous NBF or MAR at 28 and 42 days. Based on these results, it can be seen that the PLDLLA internal fixation device is biocompatible and allows new bone formation around the screw thread.

Perspectivas atuais da engenharia de tecidos da articulação temporomandibular / Perspectivas Actuales de la Ingeniería de Tejidos para la Articulación Temporomandibular / Current Perspectives of Tissue Engineering for the Temporomandibular Joint

Introdução: As limitações das terapias atuais para doenças degenerativas da articulação temporomandibular (ATM) levaram ao aumento do interesse em estratégias regenerativas. A engenharia de tecidos (ET), combinando células-tronco, arcabouços e fatores de crescimento, pode fornecer uma substituição biológica funcional e permanente das estruturas da ATM, além de prevenir o avanço de doenças degenerativas. Objetivo: Este artigo descreve as perspectivas atuais da ET das estruturas da ATM em modelos animais. Metodologia: As abordagens da ET foram categorizadas de acordo com as estruturas primárias da ATM: 1) o disco articular, 2) o côndilo mandibular e 3) a fossa glenóide e eminência articular. Resultados: As áreas com a maior quantidade de estudos são o côndilo mandibular e disco articular, em estudos que abordam o uso de arcabouços tridimensionais, de origem sintética e/ou natural, podendo ou não estar associados a células tronco (diferenciadas ou não) e a fatores de crescimento. Conclusão: A ET da ATM ainda é uma área relativamente nova, em desenvolvimento e em constante avanço. Os avanços tecnológicos desenvolvidos nessa área têm o potencial de auxiliar no desenvolvimento de terapias mais eficientes e menos invasivos... (AU)

Introducción: Las limitaciones de las terapias actuales para las enfermedades degenerativas de la articulación temporomandibular (ATM) han llevado a un mayor interés en las estrategias regenerativas. La ingeniería de tejidos, que combina células, andamios y factores de crecimiento, puede proporcionar un reemplazo biológico funcional y permanente de las estructuras de la ATM, además de prevenir el avance de enfermedades degenerativas. Objetivo: Este artículo describe las perspectivas actuales de la ingeniería de tecidos de las estructuras de la ATM en modelos animales. Metodología: Los enfoques de ingeniería de tejidos se clasificaron según las estructuras primarias de la ATM: 1) el disco articular, 2) el cóndilo mandibular y 3) la fosa glenoidea y la eminencia articular. Resultados: Las áreas con mayor número de estudios son el cóndilo mandibular y el disco articular, en estudios que abordan el uso de estructuras tridimensionales, de origen sintético y/o natural, que pueden o no estar asociadas a células (diferenciadas o no) y con factores de crecimiento. Conclusión: La ingeniería de tejidos de la ATM es todavía un área relativamente nueva, en desarrollo y en constante avance. Los avances tecnológicos desarrollados en esta área tienen el potencial de ayudar en el desarrollo de terapias más eficientes y menos invasivas... (AU)

Introduction: The limitations of current therapies for degenerative diseases of the temporomandibular joint (TMJ) have led to increased interest in regenerative strategies. Tissue engineering (TE), combining stem cells, scaffolds, and growth factors, can provide a functional and permanent biological replacement of TMJ structures, in addition to preventing the advancement of degenerative diseases. Aim: This article describes current TE perspectives of TMJ structures in animal models. Methods: TE approaches were categorized according to the primary TMJ structures: 1) the articular disc, 2) the mandibular condyle, and 3) the glenoid fossa and articular eminence. Results: The areas with the greatest number of studies are the mandibular condyle and articular disc, in studies that address the use of three-dimensional scaffolds, of synthetic and/ or natural origin, which may or may not be associated with stem cells (differentiated or not) and with growth factors. Conclusion: TE of the TMJ is still a relatively new, developing, and constantly advancing area. The technological advances developed in this area have the potential to assist in the development of more efficient and less invasive therapies... (AU)

Perspectivas atuais da Engenharia de Tecidos da articulação temporomandibular / Perspectivas Actuales de la Ingeniería de Tejidos para la Articulación Temporomandibular / Current Perspectives of Tissue Engineering for the Temporomandibular Joint

Introdução: As limitações das terapias atuais para doenças degenerativas da articulação temporomandibular (ATM) levaram ao aumento do interesse em estratégias regenerativas. A engenharia de tecidos (ET), combinando células-tronco, arcabouços e fatores de crescimento, pode fornecer uma substituição biológica funcional e permanente das estruturas da ATM, além de prevenir o avanço de doenças degenerativas. Objetivo: Este artigo descreve as perspectivas atuais da ET das estruturas da ATM em modelos animais. Metodologia: As abordagens da ET foram categorizadas de acordo com as estruturas primárias da ATM: 1) o disco articular, 2) o côndilo mandibular e 3) a fossa glenóide e eminência articular. Resultados: As áreas com a maior quantidade de estudos são o côndilo mandibular e disco articular, em estudos que abordam o uso de arcabouços tridimensionais, de origem sintética e/ou natural, podendo ou não estar associados a células tronco (diferenciadas ou não) e a fatores de crescimento. Conclusão: A ET da ATM ainda é uma área relativamente nova, em desenvolvimento e em constante avanço. Os avanços tecnológicos desenvolvidos nessa área têm o potencial de auxiliar no desenvolvimento de terapias mais eficientes e menos invasivos... (AU)

Introducción: Las limitaciones de las terapias actuales para las enfermedades degenerativas de la articulación temporomandibular (ATM) han llevado a un mayor interés en las estrategias regenerativas. La ingeniería de tejidos, que combina células, andamios y factores de crecimiento, puede proporcionar un reemplazo biológico funcional y permanente de las estructuras de la ATM, además de prevenir el avance de enfermedades degenerativas. Objetivo: Este artículo describe las perspectivas actuales de la ingeniería de tecidos de las estructuras de la ATM en modelos animales. Metodología: Los enfoques de ingeniería de tejidos se clasificaron según las estructuras primarias de la ATM: 1) el disco articular, 2) el cóndilo mandibular y 3) la fosa glenoidea y la eminencia articular. Resultados: Las áreas con mayor número de estudios son el cóndilo mandibular y el disco articular, en estudios que abordan el uso de estructuras tridimensionales, de origen sintético y/o natural, que pueden o no estar asociadas a células (diferenciadas o no) y con factores de crecimiento. Conclusión: La ingeniería de tejidos de la ATM es todavía un área relativamente nueva, en desarrollo y em constante avance. Los avances tecnológicos desarrollados en esta área tienen el potencial de ayudar en el desarrollo de terapias más eficientes y menos invasivas... (AU)

Introduction: The limitations of current therapies for degenerative diseases of the temporomandibular joint (TMJ) have led to increased interest in regenerative strategies. Tissue engineering (TE), combining stem cells, scaffolds, and growth factors, can provide a functional and permanent biological replacement of TMJ structures, in addition to preventing the advancement of degenerative diseases. Aim: This article describes current TE perspectives of TMJ structures in animal models. Methods: TE approaches were categorized according to the primary TMJ structures: 1) the articular disc, 2) the mandibular condyle, and 3) the glenoid fossa and articular eminence. Results: The areas with the greatest number of studies are the mandibular condyle and articular disc, in studies that address the use of three-dimensional scaffolds, of synthetic and/or natural origin, which may or may not be associated with stem cells (differentiated or not) and with growth factors. Conclusion: TE of the TMJ is still a relatively new, developing, and constantly advancing area. The technological advances developed in this area have the potential to assist in the development of more efficient and less invasive therapies... (AU)

Protocolo de laser de baixa potência na prevenção de dor, edema e trismo decorrente de extrações de terceiros molares inferiores retidos: estudo clínico, comparativo, randomizado e duplo cego / The effect of lowlevel laser protocol on the prevention of pain, edema and trismus due to retained lower third molar extractions: a clinical, comparative, randomized, double blind study

O objetivo desse ensaio clínico randomizado (split mouth) foi avaliar um protocolo de laser de baixa potência, no controle de dor, edema e trismo após extração de terceiros molares retidos. Foram selecionados 13 pacientes com terceiros molares inclusos bilateralmente e com posição semelhante foram utilizados para um estudo de boca dividida. Os pacientes foram distribuídos de forma randomizada, conforme o tratamento administrado, Lado Laser: dose única de laser de baixa potência no comprimento de onda 810 nm, 6 J (100 mW, 60s/ponto); e lado sham: simulação de aplicação do laser. Após a cirurgia realizada, os pacientes foram acompanhados três dias consecutivos para avaliação da 1) Dor, através da média de consumo de analgésico de resgate (NAR), Escala Visual Analógica (EVA) nos períodos de 0h, 1h, 2h, 3h, 12h, 24h, 48h, 72h e média do tempo de consumo do primeiro analgésico; 2) Edema, através da EVA, e média obtidas das medidas faciais lineares obtidas entre o ângulo mandibular até canto do olho, do tragus até comissura labial e do tragus até mento (porção central) nos períodos de 0h, 24h, 48h, 72h; 3) Trismo, através da média de abertura bucal nos períodos de 0h, 24h, 48h, 72h. Os resultados da EVA mostram que o laser controlou melhor a dor nos períodos de 3 (p = 0,010), 24 (p = 0,002), e 48 horas (p = 0,013). Não houve diferença entre Laser e Sham para NAR (p = 0,329) e para o tempo necessário para o primeiro consumo de analgésico (p = 0,462). Os resultados da EVA para edema mostram que o laser controlou melhor nos períodos de 24 (p = 0,041) e 48 horas (p = 0,013). A redução da abertura bucal foi menor no grupo Sham em todos os períodos avaliados (p < 0,05). Conclui-se que o protocolo de laser utilizado nessa pesquisa permitiu redução de dor e edema, conduto sem efeito para o trismo(AU)

The aim of this randomized clinical trial (split mouth) was to evaluate a low intensity laser protocol to control pain, edema and trismus after extraction of retained third molars. . For this, 13 patients with similarly positioned bilateral third molars were used and each patient served twice as a sample unit. Patients were randomized according to the treatment they would receive, laser side: single low power laser at 810 nm wavelength, 6 J (100 mW, 60s / dot); and sham side: laser application simulation. After surgery, patients were followed for three consecutive days to assess 1) Pain, by means of rescue analgesic consumption (NAR), Visual Analog Scale (VAS) in the periods of 0h, 1h, 2h, 3h, 12h , 24h, 48h, 72 h and mean time of first analgesic use; 2) Edema, through VAS, and mean obtained from the linear facial measurements obtained between the mandibular angle to the corner of the eye, the tragus to the labial commissure and the tragus to the chin (central por tion) in the periods of 0h, 24h, 48h, 72h; 3) Trismus, through the mouth opening average in the periods of 0h, 24h, 48h, 72h. The VAS results show that the laser better controlled pain at periods of 3 (p = 0.010), 24 (p = 0.002), and 48 hours (p = 0.013). There was no difference between Laser and Sham for NAR (p = 0.329) and for the time required for the first analgesic use (p = 0.462). VAS results for edema show that the laser controlled better at 24 (p = 0.041) and 48 hours (p = 0.013). Mouth opening redu ction was smaller in the Sham group in all periods evaluated (p <0.05). It is concluded that the laser protocol used in this research allowed pain and edema reduction, conduit without effect for trismus(AU)