RESUMEN
Developing efficient, lightweight, and durable all-solid-state supercapacitors is crucial for future energy storage systems. The study focuses on optimizing electrode materials to achieve high capacitance and stability. This study introduces a novel two-step pyrolysis process to synthesize activated carbon nanosheets from jute sticks (JAC), resulting in an optimized JAC-2 material with a high yield (≈24%) and specific surface area (≈2600 m2 g-1). Furthermore, an innovative in situ synthesis approach is employed to synthesize hybrid nanocomposites (NiCoLDH-1@JAC-2) by integrating JAC nanosheets with nickel-cobalt-layered double hydroxide nanoflowers (NiCoLDH). These nanocomposites serve as positive electrode materials and JAC-2 as the negative electrode material in all-solid-state asymmetric hybrid supercapacitors (HSCs), exhibiting remarkable performance metrics. The HSCs achieve a specific capacitance of 750 F g-1, a specific capacity of 209 mAh g-1 (at 0.5 A g-1), and an energy density of 100 Wh kg-1 (at 250 W kg-1) using PVA/KOH solid electrolyte, while maintaining outstanding cyclic stability. Importantly, a density functional theory framework is utilized to validate the experimental findings, underscoring the potential of this novel approach for enhancing HSC performance and enabling the large-scale production of transition metal-based layered double hydroxides.
RESUMEN
A simple and scalable method to fabricate a novel high-energy asymmetric supercapacitor using tomato-leaf-derived hierarchical porous activated carbon (TAC) and electrochemically deposited polyaniline (PANI) for a battery-free heart-pulse-rate monitor is reported. In this study, TAC is prepared by simple pyrolysis, exhibiting nanosheet-type morphology and a high specific surface area of ≈1440 m2 g-1 , and PANI is electrochemically deposited onto carbon cloth. The TAC- and PANI- based asymmetric supercapacitor demonstrates an electrochemical performance superior to that of symmetric supercapacitors, delivering a high specific capacitance of 248 mF cm-2 at a current density of 1.0 mA cm-2 . The developed asymmetric supercapacitor shows a high energy density of 270 µWh cm-2 at a power density of 1400 µW cm-2 , as well as an excellent cyclic stability of ≈95% capacitance retention after 10 000 charging-discharging cycles while maintaining ≈98% Coulombic efficiency. Impressively, the series-connected asymmetric supercapacitors can operate a battery-free heart-pulse-rate monitor extremely efficiently upon solar-panel charging under regular laboratory illumination.
RESUMEN
The fabrication of smart, efficient, and innovative devices critically needs highly refined thin-film nanomaterials; therefore, facile, scalable, and economical methods of thin films production are highly sought-after for the sustainable growth of the hi-tech industry. The chemical vapor deposition (CVD) technique is widely implemented at the industrial level due to its versatile features. However, common issues with a precursor, such as reduced volatility and thermal stability, restrict the use of CVD to produce novel and unique materials. A modified CVD approach, named aerosol-assisted CVD (AACVD), has been the center of attention due to its remarkable tendency to fabricate uniform, homogenous, and distinct nano-architecture thin films in an uncomplicated and straightforward manner. Above all, AACVD can utilize any custom-made or commercially available precursors, which can be transformed into a transparent solution in a common organic solvent; thus, a vast array of compounds can be used for the formation of nanomaterial thin films. This review article highlights the importance of AACVD in fabricating heterobimetallic oxide thin films and their potential in making energy production (e. g., photoelectrochemical water splitting), energy storage (e. g., supercapacitors), and environmental protection (e. g., electrochemical sensors) devices. A heterobimetallic oxide system involves two metallic species either in a composite, solid solution, or metal-doped metal oxides. Moreover, the AACVD tunable parameters, such as temperature, deposition time, and precursor, which drastically affect thin films microstructure and their performance in device applications, are also discussed. Lastly, the key challenges and issues of scaling up AACVD to the industrial level and processing for emerging functional materials are also highlighted.
RESUMEN
Nanoparticles prepared from bio-reduction agents are of keen interest to researchers around the globe due to their ability to mitigate the harmful effects of chemicals. In this regard, the present study aims to synthesize copper oxide nanoparticles (CuO NPs) by utilizing root extracts of ginger and garlic as reducing agents, followed by the characterization and evaluation of their antimicrobial properties against multiple drug resistant (MDR) S. aureus. In this study, UV-vis spectroscopy revealed a reduced degree of absorption with an increase in the extract amount present in CuO. The maximum absorbance for doped NPs was recorded around 250 nm accompanying redshift. X-ray diffraction analysis revealed the monoclinic crystal phase of the particles. The fabricated NPs exhibited spherical shapes with dense agglomeration when examined with FE-SEM and TEM. The crystallite size measured by using XRD was found to be within a range of 23.38-46.64 nm for ginger-doped CuO and 26-56 nm for garlic-doped CuO. Green synthesized NPs of ginger demonstrated higher bactericidal tendencies against MDR S. aureus. At minimum and maximum concentrations of ginger-doped CuO NPs, substantial inhibition areas for MDR S. aureus were (2.05-3.80 mm) and (3.15-5.65 mm), and they were measured as (1.1-3.55 mm) and (1.25-4.45 mm) for garlic-doped NPs. Conventionally available CuO and crude aqueous extract (CAE) of ginger and garlic roots reduced MB in 12, 21, and 38 min, respectively, in comparison with an efficient (100%) reduction of dye in 1 min and 15 s for ginger and garlic doped CuO NPs.
Asunto(s)
Nanopartículas del Metal , Nanopartículas , Zingiber officinale , Animales , Antibacterianos/química , Antibacterianos/farmacología , Bovinos , Cobre/química , Cobre/farmacología , Nanopartículas del Metal/química , Pruebas de Sensibilidad Microbiana , Nanopartículas/química , Extractos Vegetales/farmacología , Staphylococcus aureusRESUMEN
Heavy fuel oil ash (HFOA) is generated as an industrial waste material during the combustion of heavy fuel oil in power/desalination plants. With increasing energy demands, a significant volume of HFOA is generated. It is generally disposed of in landfills, causing environmental pollution, as it contains several toxic elements. Recently, efforts were made towards developing strategies for reusing industrial waste materials and creating value-added products from the waste materials. Despite significant information available in the literature on the utilization of HFOA, there is still a need for a thorough and systematic review on the characterization and utilization of HFOA in various applications. Consequently, this paper aims to present a critical review of the literature on HFOA generation, its chemical composition, physical properties, morphology, and applications. It is encouraging to note that HFOA has been used in several potential applications, such as the preparation of activated carbon and carbon nanotubes, metal recovery, environmental pollutant removal, polymer composites and construction materials, etc. However, the development of several value-added materials utilizing HFOA and its applications in other areas such as coatings, cathodic protection systems, and phase change materialswould emerge as a new topic of research. It is expected that this review will act as a precursor for further research on the use of HFOA in industrial applications. Since the use of HFOA will lead to environmental, economic, and technical benefits, research in the utilization of this industrial waste material is highly recommended.
RESUMEN
There is an increasing demand for sustainable and safe packaging technologies to improve consumer satisfaction, reduce food loss during storage and transportation, and track the quality status of food throughout its distribution. This study reports the fabrication of colorimetric pH-indicative and flame-retardant nanocomposite films (NCFs) based on polyvinyl alcohol (PVA) and nanoclays for smart and safe food packaging applications. Tough, flexible, and transparent NCFs were obtained using 15% nanoclay loading (PVA-15) with superior properties, including low solubility/swelling in water and high thermal stability with flame-retardant behavior. The NCFs showed average mechanical properties that are comparable to commercial films for packaging applications. The color parameters were recorded at different pH values and the prepared NCFs showed distinctive colorimetric pH-responsive behavior during the transition from acidic to alkaline medium with high values for the calculated color difference (∆E ≈ 50). The prepared NCFs provided an effective way to detect the spoilage of the shrimp samples via monitoring the color change of the NCFs during the storage period. The current study proposes the prepared NCFs as renewable candidates for smart food packaging featuring colorimetric pH-sensing for monitoring food freshness as well as a safer alternative choice for applications that demand films with fire-retardant properties.
RESUMEN
OBJECTIVE: To compare the in vitro potential of dentin tubule occlusion of two novel experimental dentifrices consisting of fluoride containing bioactive glass (BG) with zinc oxide nanoparticles. MATERIALS AND METHODS: Forty-eight dentin discs (n = 48) were divided into 6 groups (n = 8), based on their brushing dentifrices: Group 1 = artificial saliva (AS; control); Group 2 = fluoride dentifrice (Colgate Palmolive©, UK); Group 3 = experimental nonactive agent dentifrice; Group 4 = experimental dentifrice with 1.5% BG; Group 5 = experimental dentifrice with 4% BG; and Group 6 = BioMinF© dentifrice. Postbrushing, the discs were subjected to acidic challenge with 6% wt citric acid (pH = 4.0) for 1 min. Scanning electron microscope (SEM) and energy-dispersive X-ray (EDX) spectroscopy were performed pre- and post-citric acid challenges, and percentages of tubule occlusion assessed. RESULTS: SEM micrographs of group 1 (AS) show no tubule occlusion (0%), whereas those of groups 2 and 3 show partial tubule occlusion (25 to <50% of tubules occluded). The SEM micrographs of dentifrices containing fluoride-BG (groups 4, 5, and 6) show that most of the tubules (>50 and <100%) were occluded. For all the groups (excluding group 1), pre- and post-citric acid challenge values are statistically significant (p < 0.05). EDX analysis reveals the presence of zinc in experimental dentifrices only. CONCLUSION: The results of novel experimental dentifrices are comparable to those of the BioMinF©, in terms of tubule occlusion. Dentifrices containing BG could serve as an alternative in dentin sensitivity management.
Asunto(s)
Dentífricos/farmacología , Dentina/efectos de los fármacos , Fluoruros/farmacología , Óxido de Zinc/farmacología , Vidrio , Humanos , Microscopía Electrónica de Rastreo , NanopartículasRESUMEN
OBJECTIVE: To compare effectiveness of ethylenediaminetetraacetic acid (EDTA) and citric acid in removing collagen fiber network covering dentinal tubules of human teeth. MATERIALS AND METHODS: Eighteen dentin discs were divided in three groups; Gp 1: discs received no treatment (control), Gp 2: discs etched with 17% EDTA (pH = 7.1), and Gp 3: discs etched with 6 wt% citric acid (pH = 4.0). Scanning electron microscopy (SEM) was performed to assess collagen fiber removal and X-ray diffraction (XRD) was implemented to analyse crystal peaks of discs. RESULTS: The SEM analysis demonstrated more collagen removal with EDTA treatment compared to citric acid treated specimens. Grade 6 (81% to 100% fiber removal) was mostly achieved for Gp 2 samples whereas grade 2 (1% to 20% fiber removal) was mostly achieved for Gp 3 samples and inter-group comparisons between these groups were statistically significant (p < 0.05). X-ray diffractogram of control and experimental samples demonstrated absence of calcite phase in experimental groups. The change in peak shapes and intensities were observed and citric acid treated samples revealed more intense peaks than EDTA group. CONCLUSION: Our study found 17% EDTA to be more effective in removing collagen fibers when matched with 6% citric acid.
RESUMEN
Activated carbon is an attractive adsorbent for capturing various environmental pollutants, including CO2. Herein, an optimal synthesis and impressive performance of activated carbon made from Balanites aegyptiaca (Desert date) seed shells is reported, which is an abundant agricultural waste in the Middle East and Africa. The synthesis route involved pretreating the biomass with KOH and heating it under a suitable temperature profile. An optimal KOH-to-biomass ratio and multi-stage carbonization yielded activated carbon with a surface area above 3000â m2/g and an average pore size of nearly 4.1â nm. At 0 °C, this activated carbon exhibited CO2 uptake of 11.3â mmol g-1 that surpassed the uptake capacity of previously reported activated carbons. The selectivity towards CO2 was also found to be significantly higher compared to other gases. Thus, the present approach demonstrates an efficient conversion of agricultural waste to activated carbon for capturing CO2 and other environmental contaminants.
RESUMEN
Three-dimensional printing (3DP), known as additive layer manufacturing (ALM), is a manufacturing process in which a three-dimensional structure is constructed by successive addition of deposited layers. Fused Deposition Modeling (FDM) has evolved as the most frequently utilized ALM process because of its cost-effectiveness and ease of operation. Nevertheless, layer adhesion, delamination, and quality of the finished product remain issues associated with the FDM process parameters. These issues need to be addressed in order to satisfy the requirements commonly imposed by the conventional manufacturing industry. This work is focused on the optimization of the FDM process and post-process parameters for Polylactic acid (PLA) samples in an effort to maximize their tensile strength. Infill density and pattern type, layer height, and print temperature are the process parameters, while annealing temperature is the post-process parameter considered for the investigation. Analysis based on the Taguchi L18 orthogonal array shows that the gyroid infill pattern and annealing cycle at 90 °C results in a maximum ultimate tensile strength (UTM) of 37.15 MPa. Furthermore, the regression model developed for the five variables under study was able to predict the UTS with an accuracy of more than 96%.
RESUMEN
In this work, microcrystalline cellulose (MCC) was isolated from jute sticks and sodium carboxymethyl cellulose (Na-CMC) was synthesized from the isolated MCC. Na-CMC is an anionic derivative of microcrystalline cellulose. The microcrystalline cellulose-based hydrogel (MCCH) and Na-CMC-based hydrogel (Na-CMCH) were prepared by using epichlorohydrin (ECH) as a crosslinker by a chemical crosslinking method. The isolated MCC, synthesized Na-CMC, and corresponding hydrogels were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electronic microscopy (SEM), and energy dispersive spectroscopy (EDS) for functional groups, crystallinity, surface morphology, and composite elemental composition, respectively. Pseudo-first-order, pseudo-second-order, and Elovich models were used to investigate the adsorption kinetics. The pseudo-second-order one is favorable for both hydrogels. Freundlich, Langmuir, and Temkin adsorption isotherm models were investigated. MCCH follows the Freundlich model (R2 = 0.9967), and Na-CMCH follows the Langmuir isotherm model (R2 = 0.9974). The methylene blue (MB) dye adsorption capacities of ionic (Na-CMCH) and nonionic (MCCH) hydrogels in different contact times (up to 600 min), initial concentrations (10-50 ppm), and temperatures (298-318 K) were investigated and compared. The maximum adsorption capacity of MCCH and Na-CMCH was 23.73 and 196.46 mg/g, respectively, and the removal efficiency of MB was determined to be 26.93% for MCCH and 58.73% for Na-CMCH. The Na-CMCH efficiently removed the MB from aqueous solutions as well as spiked industrial wastewater. The Na-CMCH also remarkably efficiently reduced priority metal ions from an industrial effluent. An effort has been made to utilize inexpensive, readily available, and environmentally friendly waste materials (jute sticks) to synthesize valuable adsorbent materials.
RESUMEN
α-SiAlON is commonly used to machine superalloys owing to its desirable thermal and structural properties. α-SiAlON is among the crystalline forms of SiAlON and has more favorable properties than ß-SiAlON. However, it becomes fragile during the machining of hard-to-cut materials due to its low fracture toughness and machinability. Recent research efforts focus on improving the thermal and structural properties of α-SiAlON using suitable dopants, nano-sized precursors, and the addition of metallic/ceramic reinforcement particles. The present study presents a material-by-design approach to designing and developing ceramic and metal-particle-reinforced Ca-α-SiAlON composites with properties tailored for the cutting tool applications. The mean-field homogenization theories and effective medium approximations implemented in an in-house code are used to effectively optimize the thermal and structural properties of the Ca-α-SiAlON composite by varying essential parameters such as inclusion material, volume fraction, porosity, particulate size, and thermal interface resistance. Individual properties of the matrix and reinforcements are considered in the computations of effective properties such as thermal conductivity, thermal expansion coefficient, modulus of elasticity, and fracture toughness. The main objective of the study is to enhance the thermal conductivity and fracture toughness of Ca-α-SiAlON, while lowering its thermal expansion coefficient. At the same time, the elastic modulus and hardness/strength must be maintained within an acceptable range. As a validation, Ni/Ca-α-SiAlON and SiC/Ca-α-SiAlON composites are synthesized from the nano-sized precursors, CaO dopant, and Ni/SiC microparticles via spark plasma sintering (SPS) process. The thermal conductivity, coefficient of thermal expansion, and elastic modulus of the composites are measured and compared with the computational predictions. The computational predictions are found to be comparable to that of the experimental measurements. Moreover, the studies show that WC, SiC, and Cr can be suitable reinforcement materials for enhancing the thermal and structural properties of Ca-α-SiAlON material for the cutting tool inserts.
RESUMEN
Due to rapid technological advancements, the demand for lightweight materials with improved tribo-mechanical properties is continuously growing. The development of composite materials is one of the routes taken by researchers to meet these target properties. Aluminum (Al) is one of the most suitable materials used for developing composites for a wide range of applications because of its light weight, high conductivity, and high specific strength. In this study, aluminum hybrid nanocomposites with alumina (10 Vol% Al2O3) and varying loadings of graphene oxide (0.25, 0.5 and 1 wt% GO) were fabricated using the spark plasma sintering technique. The tribological properties of the developed hybrid composites were evaluated by conducting ball-on-disk wear tests at a normal load of 3N, with a sliding speed of 0.1 m/s, and for a sliding distance of 100 m. A 440C hardened stainless steel ball with a diameter of 6.3 mm and a hardness of 62 RC was used as a counterface. Scanning electron microscopy (SEM), elemental X-ray dispersive analysis (EDS), and optical profilometry were used to ascertain the involved wear mechanisms. The results revealed that Al-10 Vol%Vol% Al2O3-0.25 wt% GO hybrid nanocomposite showed an increase of 48% in the hardness, a reduction of 55% in the specific wear rate, and a reduction of 5% in COF compared with pure aluminum.
RESUMEN
Mixed Matrix Membranes (MMM) with enhanced selectivity and permeability are preferred for gas separations. The porous metal-organic frameworks (MOFs) materials incorporated in them play a crucial part in improving the performance of MMM. In this study, Zeolitic imidazolate frameworks (ZIF-90) are selected to fabricate Polyetherimide (PEI) MMMs owing to their lucrative structural and chemical properties. This work reports new controlled post-synthetic modifications of ZIF-90 (50-PSM-ZIF-90) with ethanolamine to control the diffusion and uptake of CO2. Physical and chemical properties of ZIF-90, such as stability and presence of aldehyde functionality in the imidazolate linker, allow for easy modulation of the ZIF-90 pores and window size to tune the gas transport properties across ZIF-90-based membranes. Effects of these materials were investigated on the performance of MMMs and compared with pure PEI membranes. Performance of the MMMs was evaluated in terms of permeability of different gases and selective separation of CO2 and H2 gas. Results presented that the permeability of all membranes was in the following order, i.e., P(H2) > P(CO2) > P(O2) > P(CH4) > P(C2H6) > P(C3H8) > P(N2), demonstrating that kinetic gas diffusion is the predominant gas transport mode in these membranes. Among all the membranes, permeability of pure PEI membrane was highest for all gases due to the uniform porous morphology. The pure PEI membrane showed highest permeability of H2, which is 486.5 Barrer, followed by 49 Barrer for O2, 29 Barrer for N2, 142 Barrer for CO2, 41 Barrer for CH4, 40 Barrer for C2H6 and 39.6 Barrer for C3H8. Results also confirm the superiority of controlled PSM-ZIF-90-PEI membrane over the pure PEI and ZIF-90-PEI membranes in CO2 and H2 separation performance. The 50-PSM-ZIF-90 PEI membrane exhibited a 20% increase in CO2 separation from methane and a 26% increase over nitrogen compared to the ZIF-90-PEI membrane. The 50-PSM-ZIF-90 PEI membrane showed 15% more H2/O2 separation and 9% more H2/CH4 separation than ZIF-90 PEI membrane. Overall, this study represents the role of controlled PSM in enhancing the property of new materials like ZIF and its application in MMMs fabrication to develop a promising approach for the CO2 capture and separation.
RESUMEN
Over the past few years, the environmentally friendly synthesis of nanomaterials, including graphene using green chemistry, has attracted tremendous attention due to its easy handling, low cost, and biocompatibility. Here we demonstrate a facile and efficient green synthesis route for producing highly stable and electrochemically active three-dimensional interconnected graphene frameworks (3DIGF) from jute sticks. Initially, jute sticks derived three-dimensional amorphous activated carbon nanosheets (3DAACNs) were prepared at low temperatures (i. e., 850 °C) in an inert environment. The resultant 3DAACNs were then heat treated at a high temperature (i. e., 2700 °C) under an inert environment, resulting in 3DIGF. The prepared carbonaceous materials were fully characterized, and various experimental techniques confirmed the preparation of 3DIGF. The prepared 3DIGF shows a highly stable nature in thermal and chemical environments and demonstrates a highly dynamic nature for the electrooxidation of sulfide. This study could be considered a vital contribution towards the economic and simple approach for preparing 3DIGF from biomass.
Asunto(s)
Grafito , Biomasa , Grafito/químicaRESUMEN
Energy-levels well-matched direct Z-scheme ZnNiNdO/CdS heterojunction was successfully fabricated using facile co-precipitation and ultra-sonication techniques and characterized with XRD, FTIR, Raman, PL, UV-vis, and FE-SEM. The XRD diffractograms confirmed the co-doping of Ni-Nd in ZnO and the formation of heterostructured nanocomposite. FTIR and Raman data showed the presence of metal-oxygen vibration and optical phonon modes of ZnO and CdS. FE-SEM images exhibited the network type morphology. The energy bandgap was redshifted by co-doping (3.37-2.9 eV) and was further reduced (2.6 eV) by making a composite with CdS. The ZnNiNdO/CdS catalyst degraded 99.7, 49, 96.6, 98.6, and 98.6% methylene blue (MB), p-nitroaniline (P-Nitro), methyl orange (MO), methyl red (MR), and rhodamine B (RhB) dyes under 50 min sunlight irradiation. Moreover, ZnNiNdO/CdS showed intense inhibition activity towards Staphylococcus aureus, Escherichia coli, Proteus vulgaris, and Pseudomonas aeruginosa bacterial strains with maximum inhibition zone diameters 30, 33, 27, and 31 mm, respectively. The synergistic effects arising from band alignment can lead to efficient vectorial charge separation, transportation, and lower recombination of photoinduced charge carriers, ultimately boosting photocatalytic and antibacterial performance. The ZnNiNdO/CdS photocatalyst has higher stability up to the 7th cycle towards MB dye with ~ 5% deficit in degradation efficiency. The higher generation of superoxide and hydroxyl radical was confirmed by species trapping experiments responsible for photodegradation of dyes molecules. Furthermore, the results showed that the photocatalytic and antibacterial performance of pristine ZnO can be enhanced by co-doping and tuning energy bandgap.
Asunto(s)
Contaminantes Ambientales , Óxido de Zinc , Antibacterianos/farmacología , Colorantes/farmacología , Desinfección , Contaminantes Ambientales/farmacología , Escherichia coli , Azul de Metileno , Aguas Residuales , Óxido de Zinc/farmacologíaRESUMEN
For effective cutting tool inserts that absorb thermal shock at varying temperature gradients, improved thermal conductivity and toughness are required. In addition, parameters such as the coefficient of thermal expansion must be kept within a reasonable range. This work presents a novel material design framework based on a multi-scale modeling approach that proposes nickel (Ni)-reinforced alumina (Al2O3) composites to tailor the mechanical and thermal properties required for ceramic cutting tools by considering numerous composite parameters. The representative volume elements (RVEs) are generated using the DREAM.3D software program and the output is imported into a commercial finite element software ABAQUS. The RVEs which contain multiple Ni particles with varying porosity and volume fractions are used to predict the effective thermal and mechanical properties using the computational homogenization methods under appropriate boundary conditions (BCs). The RVE framework is validated by the sintering of Al2O3-Ni composites in various compositions. The predicted numerical results agree well with the measured thermal and structural properties. The properties predicted by the numerical model are comparable with those obtained using the rules of mixtures and SwiftComp, as well as the Fast Fourier Transform (FFT) based computational homogenization method. The results show that the ABAQUS, SwiftComp and FFT results are fairly close to each other. The effects of porosity and Ni volume fraction on the mechanical and thermal properties are also investigated. It is observed that the mechanical properties and thermal conductivities decrease with the porosity, while the thermal expansion remains unaffected. The proposed integrated modeling and empirical approach could facilitate the development of unique Al2O3-metal composites with the desired thermal and mechanical properties for ceramic cutting inserts.
RESUMEN
Green enhanced oil recovery (GEOR) is an environmentally friendly enhanced oil recovery (EOR) process involving the injection of green fluids to improve macroscopic and microscopic sweep efficiencies while boosting tertiary oil production. Carbon nanomaterials such as graphene, carbon nanotube (CNT), and carbon dots have gained interest for their superior ability to increase oil recovery. These particles have been successfully tested in EOR, although they are expensive and do not extend to GEOR. In addition, the application of carbon particles in the GEOR method is not well understood yet, requiring thorough documentation. The goals of this work are to develop carbon nanoparticles from biomass and explore their role in GEOR. The carbon nanoparticles were prepared from date leaves, which are inexpensive biomass, through pyrolysis and ball-milling methods. The synthesized carbon nanomaterials were characterized using the standard process. Three formulations of functionalized and non-functionalized date-leaf carbon nanoparticle (DLCNP) solutions were chosen for core floods based on phase behavior and interfacial tension (IFT) properties to examine their potential for smart water and green chemical flooding. The carboxylated DLCNP was mixed with distilled water in the first formulation to be tested for smart water flood in the sandstone core. After water flooding, this formulation recovered 9% incremental oil of the oil initially in place. In contrast, non-functionalized DLCNP formulated with (the biodegradable) surfactant alkyl polyglycoside and NaCl produced 18% more tertiary oil than the CNT. This work thus provides new green chemical agents and formulations for EOR applications so that oil can be produced more economically and sustainably.
RESUMEN
This study aimed to fabricate nano-hydroxyapatite (nHA) grafted/non-grafted E-glass-fiber-based (nHA/EG) and E-glass fiber (EG) orthodontic retainers and to compare their properties with commercially available retainers. Stainless-steel (SS) retainers and everStick Ortho (EST) were used as control groups. The retainers were evaluated with Raman spectroscopy and bonded to bovine teeth. The samples were fatigued under cyclic loading (120,000 cycles) followed by static load testing. The failure behavior was evaluated under an optical microscope and scanning electron microscope. The strain growth on the orthodontic retainers was assessed (48h and 168h) by an adhesion test using Staphylococcus aureus and Candida albicans. The characteristic peaks of resin and glass fibers were observed, and the debonding force results showed a significant difference among all of the groups. SS retainers showed the highest bonding force, whereas nHA/EG retainers showed a non-significant difference from EG and EST retainers. SS retainers' failure mode occurred mainly at the retainer-composite interface, while breakage occurred in glass-fiber-based retainers. The strains' adhesion to EST and EG was reduced with time. However, it was increased with nHA/EG. Fabrication of nHA/EG retainers was successfully achieved and showed better debonding force compared to other glass-fiber-based groups, whereas non-linear behavior was observed for the strains' adhesion.
RESUMEN
Aluminum matrix composites are among the most widely used metal matrix composites in several industries, such as aircraft, electronics, automobile, and aerospace, due to their high specific strength, durability, structural rigidity and high corrosion resistance. However, owing to their low hardness and wear resistance, their usage is limited in demanding applications, especially in harsh environments. In the present work, aluminum hybrid nanocomposite reinforced with alumina (Al2O3) and graphene oxide (GO) possessing enhanced mechanical and thermal properties was developed using spark plasma sintering (SPS) technique. The focus of the study was to optimize the concentration of Al2O3 and GO content in the composite to improve the mechanical and thermal properties such as hardness, compressive strength, heat flow, and thermal expansion. The nanocomposites were characterized by FESEM, EDS, XRD and Raman spectroscopy to investigate their morphology and structural properties. In the first phase, different volume percent of alumina (10%, 20%, 30%) were used as reinforcement in the aluminum matrix to obtain (Al+X% Al2O3) composite with the best mechanical/thermal properties which was found to be 10 V% of Al2O3. In the second phase, a hybrid nanocomposite was developed by reinforcing the (Al + 10 V% Al2O3) with different weight percent (0.25%, 0.5%, 1%) of GO to obtain the optimum composition with improved mechanical/thermal properties. Results revealed that the Al\10 V% Al2O3\0.25 wt.% GO hybrid nanocomposite showed the highest improvement of about 13% in hardness and 34% in compressive strength as compared to the Al\10V% Al2O3 composite. Moreover, the hybrid nanocomposite Al\10 V% Al2O3\0.25 wt.% GO also displayed the lowest thermal expansion.