Effects of radiofrequency channel numbers on B1+ mapping using the Bloch-Siegert shift method.

PURPOSE: This paper aims to investigate the impact of the channel numbers on the performance of B1+ mapping, by using the Bloch-Siegert shift (BSS) method. B1+ mapping plays a crucial role in various brain imaging protocols. THEORY AND METHODS: We simulated the radiofrequency field of the human head model in six groups of multi-channel receive coil with a range of different channel numbers. MR signals were synthesized according to the standard BSS sequence, with quantified Gaussian added. Next, we combined the signals of each channel to reconstruct the B1+ map by weighted averaging and maximum likelihood estimation strategies and evaluate the bias by relative standard deviation of each coil. RESULTS: The simulation results revealed that the accuracy of B1+ maps improved with the increasing of channel numbers, meanwhile the per channel efficiency of B1+maps accuracy gradually decrease. Both trends slowed down when the channel numbers reached 12 or above. CONCLUSION: Our finding suggests that increasing the channel numbers can improve the accuracy of B1+map. However, a diminishing efficiency of per channel accuracy improvement was overserved, indicating that the relationship between quality of B1+ map and the channel numbers is nonlinear. Based on these findings, our study provides a reference for determining channel numbers to achieve a balance of coil selection and manufacturing cost. It also provides a theoretical basis for evaluating other B1+ mapping techniques.

Statistical analysis of the accuracy of water content-based electrical properties tomography.

Water content-based electrical properties tomography (wEPT) can retrieve electrical properties (EPs) from water content maps, thereby eliminating the need for B1 field measurement in the traditional magnetic resonance electrical properties tomography method. The wEPT is performed by conventional MR scanning, such as T1 -weighted spin-echo imaging, and thus can be directly applied to clinical settings. However, the random noise propagation involved in wEPT causes inaccuracy in EP mapping. To guarantee the EP estimates desired for clinical practice, this study statically investigates the noise-specific uncertainty of wEPT through probability density function models. We calculated the probability distribution of EP maps with different noise levels and examined the effects of scan parameters on reconstruction accuracy with various flip angles (FAs) and repetition time (TR) settings. The theoretical derivation was validated by Monte Carlo simulations and human imaging experiment at 3 T. Results showed that a serious deviation could occur in tissues with large conductivity value at a low signal-to-noise ratio and quantitatively demonstrate that such deviation could be mitigated by increased FAs or TRs. This study provided useful information for the setup of scan parameters, evaluation of accuracy of the wEPT under specific SNR levels, and promote its clinical applications.

Obtaining source current density related to irregularly structured electromagnetic target field inside human body using hybrid inverse/FDTD method.

Inverse method is inherently suitable for calculating the distribution of source current density related with an irregularly structured electromagnetic target field. However, the present form of inverse method cannot calculate complex field-tissue interactions. A novel hybrid inverse/finite-difference time domain (FDTD) method that can calculate the complex field-tissue interactions for the inverse design of source current density related with an irregularly structured electromagnetic target field is proposed. A Huygens' equivalent surface is established as a bridge to combine the inverse and FDTD method. Distribution of the radiofrequency (RF) magnetic field on the Huygens' equivalent surface is obtained using the FDTD method by considering the complex field-tissue interactions within the human body model. The obtained magnetic field distributed on the Huygens' equivalent surface is regarded as the next target. The current density on the designated source surface is derived using the inverse method. The homogeneity of target magnetic field and specific energy absorption rate are calculated to verify the proposed method.

[Research of the influences on the electromagnetic fields by the pelvic tissues in the design of the radio frequency coils].

In the present study, the effect of the electromagnetic field, induced by radio frequency (RF) coils and coupled with the pelvic tissues, was calculated with the method of finite difference time domain (FDTD). Using the established electromagnetic model of human pelvis region, the simulation was implemented. The imaging uniformity was quantitatively calculated and scaled with the values of the percentage image uniformity (PIU). The electromagnetic model was derived from the anatomical data of human pelvic region and loaded into the simulation. The results showed that the homogeneity of the magnetic fields was severely damaged due to the coupling between the RF coil and the human tissues when loaded with the human pelvis in the Birdcage RF coils at 3T. The research results set a basis meaningful for the design of RF coils.

Sensitivity investigation of open-ended coaxial probe in skin cancer detection.

Open-ended coaxial probe method is one of the most common modalities in measuring dielectric properties (DPs) of biological tissues. Due to the significant differences between the tumors and normal tissues in DPs, the technique can be used to detect skin cancer in the early stage. Although various studies have been reported, systematic assessment is in urgent need to advance it to clinical applications, for its parameters interactions and detecting limitations remained unclear. In this study, we aim to provide a comprehensive examination of this method, including the minimum detectable tumor size by using a three-layer skin model via simulation and demonstrated that open-ended coaxial probe method can be used for detection of early-stage skin cancer. The smallest detecting size are subject to different subtypes: for BCC, inside the skin is 0.5 mm radius × 0.1 mm height; for SCC, inside the skin is 1.4 mm × 1.3 mm in radius and height; the smallest distinguishing size of BCC is 0.6 mm × 0.7 mm in radius and height; for SCC is 1.0 mm × 1.0 mm in radius and height; for MM is 0.7 mm × 0.4 mm in radius and height. The experiment results showed that sensitivity was affected by tumor dimension, probe size, skin height, and cancer subtype. The probe is more sensitive to cylinder tumor radius than height growing on the surface of the skin while the smallest size probe is the most sensitive among the working probes. We provide a detailed systematic evaluation of the parameters employed in the method for further applications.

A Reliable Approach for Fabricating Tissue-Mimicking Phantoms with Designated Dielectric Properties from 16 MHz to 3 GHz.

Tissue-mimicking dielectric phantoms are widely used to mimic the relative permittivity and conductivity of human tissues in various medical applications. The artificial material combinations determine the characterization of dialectic phantoms. However, a method that reliably determined the composition of artificial materials with designed values of dielectric properties and frequency is still lacking. In this work, we propose a method that easily determine the compositions of phantom to mimic the human tissues from 16 MHz to 3 GHz.

Numerical optimization of a three-channel radiofrequency coil for open, vertical-field, MR-guided, focused ultrasound surgery using the hybrid method of moment/finite difference time domain method.

The numerical optimization of a three-channel radiofrequency (RF) coil with a physical aperture for the open, vertical-field, MR-guided, focused ultrasound surgery (MRgFUS) system using the hybrid method of moment (MoM)/finite difference time domain (FDTD) method is reported. The numerical simulation of the current density distribution on an RF coil with a complicated irregular structure was performed using MoM. The electromagnetic field simulation containing the full coil-tissue interactions within the region of interest was accomplished using the FDTD method. Huygens' equivalent box with six surfaces smoothly connected the MoM and FDTD method. An electromagnetic model of the human pelvic region was reconstructed and loaded in the FDTD zone to optimize the three-channel RF coil and compensate for the lower sensitivity at the vertical field. In addition, the numerical MoM was used to model the resonance, decoupling and impedance matching of the RF coil in compliance with engineering practices. A prototype RF coil was constructed to verify the simulation results. The results demonstrate that the signal-to-noise ratio and the homogeneity of the B(1) field were both greatly improved compared with previously published results.

[Decoupling of multi-channel RF coil and its application in the intraoperative MRI].

The coupling from different elements of the multi-channel coil leads to the splitting of the resonance frequency and deviation from the Lamor frequency. Decoupling between different elements is the key technology in the design of the radiofrequency (RF) coil. The electrical decoupling circuits should vary with different arrangements of the elements. A novel method of decoupling for the RF coil used in the intraoperative MR-guided focused ultrasound system is reported in the paper. The prototype RF coil was made according to the proposed decoupling method. The bench test of the prototype showed that the performance of the decoupling of the coil was excellent. The images in vivo were acquired with the designed prototype RF coil.

Effect of radiofrequency inhomogeneity on water-content based electrical properties tomography and its correction by flip angle maps.

Water-content based electrical properties tomography (wEPT) can retrieve electrical properties (EPs) from water-content maps. B1+ field information is not involved in the traditional magnetic resonance electrical properties tomography approach. wEPT can be performed through conventional MR scanning, such as T1-weighted spin-echo imaging, which provides convenient access to multiple clinical applications. However, the inhomogeneous radiofrequency (RF) field induced by RF coils would cause inaccuracy in wEPT reconstructions during MR scanning. We conducted a detailed investigation to evaluate the effect of inhomogeneous RF field on wEPT reconstructions to guarantee that EP mapping is desired for clinical practice. Two important considerations are involved, namely, multiple typical coil configurations and various flip angles (FAs). We proposed a correction scheme with actual FA mapping to calibrate the RF inhomogeneity and finally validated it by using human imaging at 3 T. This study illustrates a detailed evaluation for wEPT under imperfect RF homogeneity and further provides a feasible correction procedure to mitigate it. The profound knowledge of wEPT provided in our work will benefit its performance in clinical applications.

Channel-combination method for phase-based |B1+| mapping techniques.

PURPOSE: The aim of this study was to propose a channel combination method for |B1+| mapping methods using phase difference to reconstruct |B1+| map. THEORY AND METHODS: Phase-based |B1+| mapping methods commonly consider the phase difference of two scans to measure |B1+|. Multiple receiver coils acquire a number of images and the phase difference at each channel is theoretically the same in the absence of noise. Affected by noise, phase difference is approximately governed by Gaussian distribution. Considering data from all channels as samples, estimation can be achieved by maximum likelihood method. With this method, all phase differences at each channel are combined into one. In this study, the proposed method is applied with Bloch-Siegert shift |B1+| mapping method. Simulations are performed to illustrate the phase difference distribution and demonstrate the feasibility and facility of the proposed method. Phantom and vivo experiments are carried out at 1.5 T scanner equipped with 8-channel receiver coil. In all experiments, the proposed method is compared with weighted averaging (WA) method. RESULTS: Simulations revealed appropriateness of approximating the distribution of phase difference to Gaussian distribution. Compared with WA method, the proposed method reduces errors of |B1+| calculation. Phantom and vivo experiments provide further validation. CONCLUSION: Considering phase noise distribution, the proposed method achieves channel combination by finding the estimation from data acquired by multiple receivers coil. The proposed method reduces |B1+| reconstruction errors caused by noise.

Evaluation of four cell lines for assay of infectious adenoviruses in water samples.

Human viral contamination in drinking and recreational waters poses health risks. The application of PCR-based molecular technology has advanced our knowledge of the occurrence and prevalence of human viruses in water; however, it has provided no information on viral viability and infectivity. Four human cell lines were compared for their sensitivity to different serotypes of human adenoviruses using the TCID50 test. The sensitivity of each cell line varied with different serotypes of adenovirus. Human embryonic kidney cell line 293A and human lung carcinoma cell line A549 were the most sensitive, especially to enteric adenovirus 40 and 41. Plaque assay of primary sewage samples showed 293A can detect viral plaques in 7 of 13 primary sewage samples tested. Adenoviruses were also isolated using 293A from environmental water concentrates. Cloning and sequencing of environmental adenoviral isolates indentified them to be aligned with adenoviruses serotype 40 and serotype 5. The result of this study suggests that plaque assay with 293A cell line is suitable for detection of adenovirus in the aquatic environment. Combining this cell culture with molecular methods for viral assay in the aquatic environment will provide critical information for risk assessment.

Inverse design of an organ-oriented RF coil for open, vertical-field, MR-guided, focused ultrasound surgery.

The advantages of open, vertical-field, magnetic resonance-guided, focused ultrasound surgery (MRgFUS) are attractive. The inverse technique using the bi-boundary conditions is proposed to design a uterine-oriented intraoperative RF coil with an ultrasound aperture for the MRgFUS system. In the current proposed scheme, the desired magnetic field of the RF coil was set to completely overlap the target organ. The current density distribution on the RF coil surface, accounting for the expected magnetic field, was solved using the inverse technique. The stream function was available through the 'discretization' of the current density distribution on the RF coil surface. The coil windings were obtained from the contour plot of the stream function. As a modification of previous designs, the bi-boundary conditions are proposed in the inverse technique for the existence of the ultrasound aperture. Based on the obtained coil windings, a prototype coil was constructed. MR imaging of the phantom and the human body was performed to show the efficacy of the prototype coil. The results of temperature measurement using the prototype coil in a 0.4-T MR system were satisfactory. The performance of the prototype coil improved compared with the previously reported design.

Combined processes of two-stage Fenton-biological anaerobic filter-biological aerated filter for advanced treatment of landfill leachate.

There are numerous non-biodegradable organic materials in the mature landfill leachate. To meet the new discharge standard of China, additional advanced treatment is needed for the effluent from the biological treatment processes of leachate. In this study, a combined process including two stages of "Fenton-biological anaerobic filter (BANF)-biological aerated filter (BAF)" was evaluated to address the advanced treatment need. The Fenton oxidation was applied to reduce chemical oxygen demand (COD) and enhance biodegradability of refractory organics, and the BANF-BAF process was then applied to remove the total nitrogen (TN). The treatment achieved effluent concentrations of COD<70 mg/L, TN<40 mg/L and NH(3)-N<10 mg/L. The removal efficiency of COD and TN were 96.1% and 95.9%, respectively. The effluent quality met the new discharge standard for Pollution Control on the Landfill Site of Municipal Solid of PR China (GB16889-2008). The operation cost of these processes was about 36.1CHY/t (5.70USD/t).

Development of a calibration phantom set for MRI temperature imaging system quality assurance.

RATIONALE AND OBJECTIVES: Magnetic resonance imaging (MRI) temperature imaging systems need to be routinely calibrated to guarantee accurate temperature results and qualified MRI. No independent physical temperature calibration phantom (TCP) set is currently available. An economical TCP set was developed to routinely ensure the quality of MRI temperature imaging system. MATERIALS AND METHODS: The novel TCP was constructed using a heating unit, temperature sensor, and MRI phantom liquid. A specialized heating unit was developed using carbon fibers. The TCP set design was an integration of the TCP, temperature measurement unit, display unit, and control unit. The proposed MRI calibration kit, which is a combination of the TCP set and standard MRI phantom, was used in the MRI thermometry calibration and MRI quality calibration. RESULTS: The TCP set provided an efficient, accurate, and homogeneous temperature map as the reference standard temperature for calibration. Accuracy and heating efficiency of the TCP set were 1°C and 1°C/minute, respectively. Calibration of the MRI thermometry and MRI quality were implemented successfully. CONCLUSION: The proposed TCP set is completely compatible with the MRI system and can be used to calibrate MRI thermometry and MRI quality to ensure the quality performance of the MRI temperature imaging system.