RESUMEN
The PdPtVOx/CeO2-ZrO2 (PdPtVOx/CZO) catalysts were obtained by using different approaches, and their physical and chemical properties were determined by various techniques. Catalytic activities of these materials in the presence of H2O or SO2 were evaluated for the oxidation of ethylbenzene (EB). The PdPtVOx/CZO sample exhibited high catalytic activity, good hydrothermal stability, and reversible sulfur dioxide-poisoning performance, over which the specific reaction rate at 160°C, turnover frequency at 160°C (TOFPd or Pt), and apparent activation energy were 72.6 mmol/(gPtâ sec) or 124.2 mmol/(gPdâ sec), 14.2 sec-1 (TOFPt) or 13.1 sec-1 (TOFPd), and 58 kJ/mol, respectively. The large EB adsorption capacity, good reducibility, and strong acidity contributed to the good catalytic performance of PdPtVOx/CZO. Catalytic activity of PdPtVOx/CZO decreased when 50 ppm SO2 or (1.0 vol.% H2O + 50 ppm SO2) was added to the feedstock, but was gradually restored to its initial level after the SO2 was cut off. The good reversible sulfur dioxide-resistant performance of PdPtVOx/CZO was associated with the facts: (i) the introduction of SO2 leads to an increase in surface acidity; (ii) V can adsorb and activate SO2, thus accelerating formation of the SOx2- (x = 3 or 4) species at the V and CZO sites, weakening the adsorption of sulfur species at the PdPt active sites, and hence protecting the PdPt active sites to be not poisoned by SO2. EB oxidation over PdPtVOx/CZO might take place via the route of EB â styrene â phenyl methyl ketone â benzaldehyde â benzoic acid â maleic anhydride â CO2 and H2O.
Asunto(s)
Derivados del Benceno , Dióxido de Azufre , Dióxido de Azufre/química , Oxidación-Reducción , Catálisis , Estrés Oxidativo , Amoníaco/químicaRESUMEN
Superhydrophobic and slippery lubricant-infused surfaces have garnered significant attention for their potential to passively transport low-viscosity liquids like water (1 mPa s). Despite exciting progress, these designs have proven ineffective for transporting high-viscosity liquids such as polydimethylsiloxane (5500 mPa s) due to their inherent limitations imposed by the homogenous surface design, resulting in high viscous drags and compromised capillary forces. Here, a heterogenous water-infused divergent surface (WIDS) is proposed that achieves spontaneous, rapid, and long-distance transport of viscous liquids. WIDS reduces viscous drag by spatially isolating the viscous liquids and surface roughness through its heterogenous, slippery topological design, and generates capillary forces through its heterogenous wetting distributions. The essential role of surface heterogeneity in viscous liquid transport is theoretically and experimentally verified. Remarkably, such a heterogenous paradigm enables transporting liquids with viscosities exceeding 12â¯500 mPa s, which is two orders of magnitude higher than state-of-the-art techniques. Furthermore, this heterogenous design is generic for various viscous liquids and can be made flexible, making it promising for various systems that require viscous liquid management, such as micropatterning.
RESUMEN
Catalytic combustion is thought as an efficient and economic pathway to remove volatile organic compounds, and its critical issue is the development of high-performance catalytic materials. In this work, we used the in situ synthesis method to prepare the silicalite-1 (S-1)-supported Pd nanoparticles (NPs). It is found that the as-prepared catalysts displayed a hexagonal prism morphology and a surface area of 390-440 m2/g. The sample (0.28Pd/S-1-H) derived after reduction at 500°C in 10 vol% H2 showed the best catalytic activity for toluene combustion (T50% = 180°C and T90% = 189°C at a space velocity of 40,000 mL/(g·hr), turnover frequency (TOFPd) at 160°C = 3.46 × 10-3 sec-1, and specific reaction rate at 160°C = 63.8 µmol/(gPd·sec)), with the apparent activation energy (41 kJ/mol) obtained over the best-performing 0.28Pd/S-1-H sample being much lower than those (51-70 kJ/mol) obtained over the other samples (0.28Pd/S-1-A derived from calcination at 500°C in air, 0.26Pd/S-1-im derived from the impregnation route, and 0.27Pd/ZSM-5-H prepared after reduction at 500°C in 10 vol% H2). Furthermore, the 0.28Pd/S-1-H sample possessed good thermal stability and its partial deactivation due to CO2 or H2O introduction was reversible, but SO2 addition resulted in an irreversible deactivation. The possible pathways of toluene oxidation over 0.28Pd/S-1-H was toluene â p-methylbenzoquinone â maleic anhydride, benzoic acid, benzaldehyde â carbon dioxide and water. We conclude that the good dispersion of Pd NPs, high adsorption oxygen species concentration, large toluene adsorption capacity, strong acidity, and more Pd0 species were responsible for the good catalytic performance of 0.28Pd/S-1-H.
Asunto(s)
Óxidos , Tolueno , Catálisis , Oxidación-Reducción , Estrés OxidativoRESUMEN
Polychlorinated biphenyls (PCBs) are bioaccumulative persistent organic pollutants with a great impact on cetaceans. To examine the content of PCBs and their risks to finless porpoises, this study determined the concentrations of seven typical PCB congeners in 56 tissue samples of East Asian finless porpoises (EAFPs) sampled in 2009-2012 from Ningbo (29.8835° N, 122.0644° E), Pingtan (25.5133° N, 119.8172° E) and Lvsi (32.1035° N, 121.6078° E). PCB138, PCB153 and PCB101 were the predominant congeners, accounting for 31.15%, 18.59% and 15.75%, respectively, of all PCBs detected. The content of PCBs increased with age in males but decreased from juveniles to adults in females due to transfer to calves by reproduction and lactation. EAFPs in Ningbo and Pingtan accumulated more PCBs than those in Lvsi Port. The trophic positions of EAFPs from Lvsi, Pingtan and Ningbo were 9.41, 8.95 and 9.43, respectively. PCB concentrations did not accumulate significantly with increasing trophic levels. The risk quotient index indicated that the risk of trichlorobiphenyl (3-PCB), tetrachlorobiphenyl (4-PCB), pentachlorobiphenyls (5-PCB), and hexachlorobiphenyls (6-PCB) to EAFPs in the East China Sea was generally low and within safe limits thus far. Supplementary Information: The online version contains supplementary material available at 10.1007/s43188-023-00221-0.
RESUMEN
Recreational boats are common in many coastal waters, yet their effects on cetaceans and other sensitive marine species remain poorly understood. To address this knowledge gap, we used drone video footage recorded from a recreational boat to quantify how harbour porpoises (Phocoena phocoena) responded to the boat approaching at different speeds (10 or 20 knots). Furthermore, we used a hydrophone to record boat noise levels at full bandwidth (0.1-150 kHz) and at the 1/3 octave 16 kHz frequency band for both experimental speeds. The experiments were carried out in shallow waters near Funen, Denmark (55.51° N, 10.79° E) between July and September 2022. Porpoises were more likely to move further away from the path of the boat when approached at 10 knots, but not when approached at 20 knots. In contrast, they swam faster when approached at 20 knots, but not when approached at 10 knots. The recorded received sound level did not depend on how fast the boat approached, suggesting that differences in porpoise responses were related to the speed of the approaching boat rather than to sound intensity. In addition, porpoises generally reacted within close proximity (<200 m) to the approaching boat and quickly (<50 s) resumed their natural behaviour once the boat had passed, indicating that the direct impact of small vessels on porpoise behaviour was most likely small. Nevertheless, repeated exposure to noise from small vessels may influence porpoises' activity or energy budget, and cause them to relocate from disturbed areas. The approach used in this study increases our understanding of recreational boats' impact on harbour porpoises and can be used to inform efficient mitigation measures to help focus conservation efforts.
RESUMEN
The development of new electromagnetic absorbing materials is the main strategy to address electromagnetic radiation. Once traditional electromagnetic wave-absorbing materials are prepared, it is difficult to dynamically change their electromagnetic wave-absorbing performance. Facing the complexity of the information age and the rapid development of modern radar, it is significant to develop intelligent modulation of electromagnetic wave-absorbing materials. Here, CNTs/VO2/ANF composite aerogels with dynamic frequency tunability and switchable absorption on/off were synthesized. Based on the phase change behavior of VO2, the degree of polarization and interfacial effects of multiple heterogeneous interfaces between VO2 and CNTs and aramid nanofibers (ANFs) were modulated at different temperatures. With the increase in temperature (from 25 to 200 °C), the maximum absorption frequency of the frequency tunable aerogel is modulated from 12.24 to 8.56 GHz in the X-band, and the absorption intensity remains stable. The maximum effective switching bandwidth (ΔEAB) of the wave-absorbing switchable aerogel is 3.70 GHz. This study provides insights into intelligent electromagnetic wave absorption performance and paves the way for temperature-driven application of intelligent modulation of electromagnetic absorbers.
RESUMEN
Advanced manufacturing technology and systems (AMTSs) combine the principles of mechanical engineering with design innovation to create products and processes that are better, faster and more precise [...].
RESUMEN
Certain polybrominated diphenyl ethers (PBDEs) have been banned for years, however, they still possess the potential to harm marine cetaceans. In this study, 56 East Asian finless porpoises (EAFPs) collected from three locations of the East China Sea between 2009 and 2011, were analyzed to determine the presence of typical PBDE congeners. Among all the samples, BDE47 was the main congener, constituting â¼48.3 % of the ΣPBDEs. Significant variations (p < 0.01) in PBDE abundance were observed among different regions (Pingtan: 172.8 ng/g, Lvsi: 61.2 ng/g and Ningbo: 32.9 ng/g). In addition, there was a significant positive correlation between PBDE abundance and male body length. The general ΣPBDEs concentration of this population was lower compared to other populations and cetaceans. Although combined risk assessments indicated a low risk to porpoise health, long-term surveillance is essential as PBDEs are not completely banned.
Asunto(s)
Monitoreo del Ambiente , Éteres Difenilos Halogenados , Marsopas , Contaminantes Químicos del Agua , Animales , Masculino , China , Monitoreo del Ambiente/métodos , Éteres Difenilos Halogenados/análisis , Contaminantes Químicos del Agua/análisis , Océanos y MaresRESUMEN
Liver diseases are the primary reason for morbidity and mortality in the world. Owing to a shortage of organ donors and postoperative immune rejection, patients routinely suffer from liver failure. Unlike 2D cell models, animal models, and organoids, 3D bioprinting can be successfully employed to print living tissues and organs that contain blood vessels, bone, and kidney, heart, and liver tissues and so on. 3D bioprinting is mainly classified into four types: inkjet 3D bioprinting, extrusion-based 3D bioprinting, laser-assisted bioprinting (LAB), and vat photopolymerization. Bioinks for 3D bioprinting are composed of hydrogels and cells. For liver 3D bioprinting, hepatic parenchymal cells (hepatocytes) and liver nonparenchymal cells (hepatic stellate cells, hepatic sinusoidal endothelial cells, and Kupffer cells) are commonly used. Compared to conventional scaffold-based approaches, marked by limited functionality and complexity, 3D bioprinting can achieve accurate cell settlement, a high resolution, and more efficient usage of biomaterials, better mimicking the complex microstructures of native tissues. This method will make contributions to disease modeling, drug discovery, and even regenerative medicine. However, the limitations and challenges of this method cannot be ignored. Limitation include the requirement of diverse fabrication technologies, observation of drug dynamic response under perfusion culture, the resolution to reproduce complex hepatic microenvironment, and so on. Despite this, 3D bioprinting is still a promising and innovative biofabrication strategy for the creation of artificial multi-cellular tissues/organs.
RESUMEN
(1) Background: Microfluidic chips have found extensive applications in multiple fields due to their excellent analytical performance. As an important platform for micro-mixing, the performance of micromixers has a significant impact on analysis accuracy and rate. However, existing micromixers with high mixing efficiency are accompanied by high pressure drop, which is not conducive to the integration of micro-reaction systems; (2) Methods: This paper proposed a novel "Tai Chi"-shaped planar passive micromixer with high efficiency and low pressure drop. The effect of different structural parameters was investigated, and an optimal structure was obtained. Simulations on the proposed micromixer and two other micromixers were carried out while mixing experiments on the proposed micromixer were performed. The experimental and simulation results were compared; (3) Results: The optimized values of the parameters were that the straight channel width w, ratio K of the outer and inner walls of the circular cavity, width ratio w1/w2 of the arc channel, and number N of mixing units were 200 µm, 2.9, 1/2, and 6, respectively. Moreover, the excellent performance of the proposed micromixer was verified when compared with the other two micromixers; (4) Conclusions: The mixing efficiency M at all Re studied was more than 50%, and at most Re, the M was nearly 100%. Moreover, the pressure drop was less than 18,000 Pa.
RESUMEN
Static repellency and pressure resistance to liquids are essential for high-performance super-omniphobic surfaces. However, these two merits appear mutually exclusive in conventional designs because of their conflicting structural demands: Static liquid repellency necessitates minimal solid-liquid contact, which in turn inevitably undercuts the surface's ability to resist liquid invasion exerted by the elevated pressure. Here, inspired by the Springtail, these two merits can be simultaneously realized by structuring surfaces at two size scales, with a micrometric reentrant structure providing static liquid repellency and a nanometric reentrant structure providing pressure resistance, which dexterously avoids the dilemma of their structural conflicts. The nanometric reentrants are densely packed on the micrometric ones, serving as "armor" that prevents liquids invasion by generating multilevel energy barriers, thus naming the surface as the armored reentrants (AR) surface. The AR surface could repel liquids with very low surface tensions, such as silicone oil (21 mN m-1 ), and simultaneously resist great pressure from the liquids, exemplified by enduring the impact of low-surface-tension liquids under a high weber number (>400), the highest-pressure resistance ever reported. With its scalable fabrication and enhanced performance, our design could extend the application scope of liquid-repellent surfaces toward ultimate industrial settings.
RESUMEN
Background: To study the active ingredient and possible mechanism of Huisheng oral liquid in the treatment of lung cancer by network pharmacology. Methods: The active ingredient and drug targets of Huisheng oral liquid were screened using the Traditional Chinese Medicine Systems Pharmacology Database and Analysis Platform (TCMSP) and Traditional Chinese Medicine Integrated Database (TCMID), and lung cancer targets were screened using the Gene Expression Omnibus (GEO) database. The drug targets of the effective components of Huisheng oral liquid were matched with disease targets and the obtained intersecting targets were imported into the Search Tool for the Retrieval of Interaction Gene/Proteins (STRING) database to construct a protein-protein interaction (PPI) network. R software and the Kyoto Encyclopedia of Genes and Genomes (KEGG) database were used for Gene Ontology (GO) and KEGG enrichment analyses, and Cytoscape software was used to construct a Huisheng oral liquid component target-lung cancer target network. The function and pathway of the therapeutic target of Huisheng oral liquid for lung cancer were analyzed. Results: A total of 1,376 differentially expressed genes (DEGs) of lung cancer were obtained, and 185 potential effective components of Huisheng oral liquid in the treatment of lung cancer were obtained, including quercetin, luteolin, kaempferol, and baicalein. There were 36 intersecting targets between Huisheng oral liquid and lung cancer, and the key targets for lung cancer treatment were CDKN1A, CCNB1, MDM2, CDK1, ErbB2, E2F1, EGFR, etc. Huisheng oral liquid mainly regulates the p53 signaling pathway. Conclusions: The mechanism of Huisheng oral liquid in the treatment of lung cancer is mainly reflected in regulating tumor cell apoptosis, inhibiting angiogenesis, and improving immunity.
RESUMEN
Compacted graphite iron (CGI) has become the most ideal material for automotive engine manufacturing owing to its excellent mechanical properties. However, tools are severely worn during processing, considerably shortening their lifespan. In this study, we prepared a series of cemented carbide-coated tools and evaluated their coating properties in cutting tests. Among all tested coatings, PVD coating made of AlCrN (AC) presented with the best surface integrity and mechanical properties, achieving the best comprehensive performance in the coating test. The AC-coated tool also exhibited the best cutting performance at a low speed of 120 m/min, corresponding to a 60% longer cutting life and the lowest workpiece surface roughness relative to other coated tools. In the cutting test at a high speed of 350 m/min, the CVD double-layer coated tool (MT) with a TiCN inner layer of and an Al2O3 outer layer had a 70% longer cutting life and the lowest workpiece surface roughness relative to other coated tools.
RESUMEN
Background: Sintilimab is an immune checkpoint inhibitor (ICI). It can induce immune-related Adverse Events (irAEs). Severe adverse skin reactions are rare, but the mortality rate is high. We report the first case of successful treatment of adverse skin reactions using traditional Chinese medicine (TCM). Case Description: Here we present the case of a 67-year-old male with advanced lung squamous carcinoma. After 8 cycles of chemotherapy, the patient's disease progressed and the treatment regimen was adjusted to sintilimab combined with albumin paclitaxel and cisplatin. Thirty-two days after this cycle, the patient reported a sporadic rash with pruritus on the face, front chest, and both upper limbs. The area of rash was 40%, and the adverse reaction was grade 3. The level of interleukin-related indicators was above normal. The patient's skin symptoms disappeared after treatment with hormones, TCM, and other drugs. The patient's adverse skin reaction was due to an immune-related toxicity caused by sintilimab, so treatment with sintilimab was suspended. The albumin-paclitaxel plus cisplatin regimen was continued to treat lung cancer. Conclusions: Although rare, case of fatal adverse reaction caused by sintilimab have been reported. We recommend early monitoring and recognition of symptoms. During management, high-dose hormones combined TCM may be helpful.
RESUMEN
In this paper, we present a new method to realize anisotropy by restricting a droplet on an unstructured Si hydrophobic domain between two superhydrophobic strips fabricated by femtosecond laser. The water contact angles and corresponding water baseline length were investigated. The results showed that anisotropy would vary with the volume-induced pinning-depinning-repinning behavior of the droplet. Furthermore, through the observation of water response on small Si domain, the adhesive force of the structure is proven to be the key factor giving rise to the anisotropy wetting. This phenomenon could potentially be used as a model for fundamental research, and such structures could be utilized to control large volume in microfluidic devices, lab-on-chip system, microreactors, and self-cleaning surfaces.
RESUMEN
Novel coronavirus disease 2019 (COVID-19) is a global pandemic caused by severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2), which can be transmitted from person to person. As of September 21, 2021, over 228 million cases were diagnosed as COVID-19 infection in more than 200 countries and regions worldwide. The death toll is more than 4.69 million and the mortality rate has reached about 2.05% as it has gradually become a global plague, and the numbers are growing. Therefore, it is important to gain a deeper understanding of the genome and protein characteristics, clinical diagnostics, pathogenic mechanisms, and the development of antiviral drugs and vaccines against the novel coronavirus to deal with the COVID-19 pandemic. The traditional biology technologies are limited for COVID-19-related studies to understand the pandemic happening. Bioinformatics is the application of computational methods and analytical tools in the field of biological research which has obvious advantages in predicting the structure, product, function, and evolution of unknown genes and proteins, and in screening drugs and vaccines from a large amount of sequence information. Here, we comprehensively summarized several of the most important methods and applications relating to COVID-19 based on currently available reports of bioinformatics technologies, focusing on future research for overcoming the virus pandemic. Based on the next-generation sequencing (NGS) and third-generation sequencing (TGS) technology, not only virus can be detected, but also high quality SARS-CoV-2 genome could be obtained quickly. The emergence of data of genome sequences, variants, haplotypes of SARS-CoV-2 help us to understand genome and protein structure, variant calling, mutation, and other biological characteristics. After sequencing alignment and phylogenetic analysis, the bat may be the natural host of the novel coronavirus. Single-cell RNA sequencing provide abundant resource for discovering the mechanism of immune response induced by COVID-19. As an entry receptor, angiotensin-converting enzyme 2 (ACE2) can be used as a potential drug target to treat COVID-19. Molecular dynamics simulation, molecular docking and artificial intelligence (AI) technology of bioinformatics methods based on drug databases for SARS-CoV-2 can accelerate the development of drugs. Meanwhile, computational approaches are helpful to identify suitable vaccines to prevent COVID-19 infection through reverse vaccinology, Immunoinformatics and structural vaccinology.
Asunto(s)
COVID-19/epidemiología , Biología Computacional/métodos , Pandemias , Antivirales/uso terapéutico , Inteligencia Artificial , COVID-19/virología , Humanos , Simulación del Acoplamiento Molecular , Simulación de Dinámica Molecular , SARS-CoV-2/aislamiento & purificación , Tratamiento Farmacológico de COVID-19RESUMEN
Deep-and-narrow micro-grooves are the common functional structures of miniature parts. The fabrication of the micromilled grooves with high quality and accuracy is the essential guarantee of the causative performance for these miniature parts, and micromilling is the most versatile process to machine such micro-grooves. However, micromilling technology is a highly tool-dependent process, and the commercial carbide micromilling cutter has shown obvious deficiencies in terms of rapid tool wear and inferior machined quality during the machining process. In this paper, a polycrystalline diamond (PCD) micromilling cutter with a large-aspect-ratio (LAR) was designed and prepared by the self-proposed hybrid fabrication method of laser and precision grinding. Micromilling experiments on oxygen-free copper were conducted, and the carbide micromilling cutter was selected in the comparative experiments. The variations of milling forces and specific energy were analyzed through the parameter experiments. Then, the surface quality, machined accuracy and tool wear were further investigated. Results showed that the PCD micromilling cutter with an aspect ratio of 3.25 was successfully manufactured by the proposed hybrid method. The self-fabricated PCD micromilling cutter presented remarkable superiority in terms of the surface quality, machined accuracy, and tool wear when preparing deep-and-narrow micro-grooves. Finally, a satisfactory micromilled groove with an aspect ratio of 2.5 was achieved with the self-fabricated LAR PCD cutter under the optimized conditions.
RESUMEN
There has been increasing concern about trace element accumulation in finless porpoises over the past decades, while the long-term variation of its concentration has been little known. Since most soft tissues of porpoises in the past were not preserved until now, the bone tissue is the only ideal material available. Here, 27 East Asian finless porpoise bone samples collected from Nantong, the East China Sea during two periods (1984-1992 and 2009) were used to explore the temporal variation of nine typical elements' concentration (Fe, Mn, Cu, Ni, Hg, Cr, Pb, As, and Cd, dry weight). An upward trend for total trace element accumulation from 329.04 mg/kg in 1984-1992 to 1535.81 mg/kg in 2009 was found; this could have resulted from the increasing industrial development in the Nantong region. The Mn, Fe, and As levels increased significantly while the concentrations of Cd, Cu, and Pb significantly decreased. Generally, our results suggested that most trace elements posed low threats to East Asian finless porpoises' health during both periods, while elements Mn (2009), Ni (both periods), Fe (2009), and As (2009) posed a potentially higher health risk to porpoises. Thus, the trace element levels warrant concern and continuous monitoring.
Asunto(s)
Mercurio , Marsopas , Oligoelementos , Animales , Huesos/química , China , Oligoelementos/análisisRESUMEN
BACKGROUND: Triple-negative breast cancer (TNBC) is the most common and aggressive type of breast cancer with an unfavourable outcome worldwide. Novel therapeutic targets are urgently required to explore this malignancy. This study explored the ceRNA network and the important genes for predicting the therapeutic targets. METHODS: It identified the differentially expressed genes of mRNAs, lncRNAs and miRNAs between TNBC and non-TNBC samples in four cohorts (TCGA, GSE38959, GSE45827 and GSE65194) to explore the novel therapeutic targets for TNBC. Downstream analyses, including functional enrichment analysis, ceRNA network, protein-protein interaction and survival analysis, were then conducted by bioinformatics analysis. Finally, the potential core protein of the ceRNA network in TNBC was validated by immunohistochemistry. RESULTS: A total of 1,045 lncRNAs and 28 miRNAs were differentially expressed in the TCGA TNBC samples, and the intersections of 282 mRNAs (176 upregulations and 106 downregulations) between the GEO and TCGA databases were identified. A ceRNA network composed of 7 lncRNAs, 62 mRNAs, 12 miRNAs and 244 edges specific to TNBC was established. The functional assay showed dysregulated genes, and GO, DO and KEGG enrichment analysis were performed. Survival analysis showed that mRNA LIFR and lncRNA AC124312.3 were significantly correlated with the overall survival of patients with TNBC in the TCGA databases (P < 0.05). Finally, the LIFR protein was validated, and immunohistochemical results showed the upregulated expression of LIFR in TNBC tissues. CONCLUSION: Thus, our study presents an enhanced understanding of the ceRNA network in TNBC, where the key gene LIFR may be a new promising potential therapeutic target for patients with TNBC.
RESUMEN
Shanshan Li, Huili Gao, Xiuqing Hao, Lin Zhu, Ting Li, Hongke Zhang, Yi Zhou, Xinrong Xu, Guang Yang, and Bingyao Chen (2018) Cetacean habitat use based on different environmental phases varies between species and geographies, and little is known about Pacific humpback dolphin habitat use in the Beibu Gulf. Here we aimed to identify seasonal, lunar and tidal influences on the spatial use of Beibu humpback dolphins based on two parameters: water depth and distance to an estuary. The ANOVA test indicated that habitat use was influenced by seasons and tidal phases, but not lunar phases. The humpback dolphins utilized shallow areas near an estuary throughout the wet season and high tides, and moved toward deeper water during the dry season and low tides. This habitat preference is likely synchronized with prey seasonal and tidal movements. The wet season and high tides bring abundant prey resources and increase accessibility to inshore shallow waters for humpback dolphins. The present study provides new information on regular habitat use by Indo- Pacific humpback dolphins, which is crucial for developing effective conservation strategies.