RESUMEN
Fe5-xGeTe2 is a two-dimensional van der Waals material that exhibits ferromagnetic order with a high Curie temperature (TC) of around room temperature. In addition to TC, two magnetic transitions occur with decreasing temperature, and a charge-ordered state is observed at low temperatures. We employed Ge Kα X-ray fluorescence holography (XFH) for Fe5-xGeTe2 to directly investigate the local structure in the charge-ordered state, i.e., the 3×3 superstructure. The Ge Kα XFH results revealed local atomic structures around the Ge atom, thus clarifying the simultaneous locations and arrangements of the Te, Fe, and Ge atoms. The atomic positions relative to the Ge atom are useful for understanding the coexistence of the ideal 1 × 1 structure and 3×3 superstructure found in the charge-ordered state.
RESUMEN
X-ray fluorescence holography (XFH) is a powerful atomic resolution technique capable of directly imaging the local atomic structure around atoms of a target element within a material. Although it is theoretically possible to use XFH to study the local structures of metal clusters in large protein crystals, the experiment has proven difficult to perform, especially on radiation-sensitive proteins. Here, the development of serial X-ray fluorescence holography to allow the direct recording of hologram patterns before the onset of radiation damage is reported. By combining a 2D hybrid detector and the serial data collection used in serial protein crystallography, the X-ray fluorescence hologram can be directly recorded in a fraction of the measurement time needed for conventional XFH measurements. This approach was demonstrated by obtaining the Mn Kα hologram pattern from the protein crystal Photosystem II without any X-ray-induced reduction of the Mn clusters. Furthermore, a method to interpret the fluorescence patterns as real-space projections of the atoms surrounding the Mn emitters has been developed, where the surrounding atoms produce large dark dips along the emitter-scatterer bond directions. This new technique paves the way for future experiments on protein crystals that aim to clarify the local atomic structures of their functional metal clusters, and for other related XFH experiments such as valence-selective XFH or time-resolved XFH.
Asunto(s)
Holografía , Rayos X , Holografía/métodos , Fluorescencia , Proteínas , Radiografía , Cristalografía por Rayos XRESUMEN
X-ray fluorescence holography (XFH) is a relatively new technique capable of providing unique three-dimensional structural information around specific atoms that act as a light source in crystalline samples. So far, XFH has typically been applied to inorganic materials such as dopants in metals and semiconductors. Here, we investigate the possibility of using XFH to visualize the metal active site in sperm whale myoglobin (Mb), a monomeric oxygen storage heme protein. We demonstrate that the atomic images reconstructed from the hologram data of crystals of carbonmonoxy myoglobin (MbCO) are moderately consistent with the crystal structure, which is also determined in this study by X-ray crystallography in the near-atomic resolution, as well as simulation results. These results open up a new avenue for the application of XFH to local atomic and electronic structure imaging of metal-sites in biomolecules.
Asunto(s)
Holografía , Mioglobina , Mioglobina/química , Rayos X , Holografía/métodos , Cristalografía por Rayos X , Hemo/química , Metales , Conformación ProteicaRESUMEN
A intermediate multidomain state and large crystallographic tilting of 1.78° for the (hh0)pc planes of a (001)pc-oriented single-domain Mn-doped BiFeO3 (BFMO) thin film were found when an electric field was applied along the [110]pc direction. The anomalous crystallographic tilting was caused by ferroelastic domain switching of the 109° domain switching. In addition, ferroelastic domain switching occurred via an intermediate multidomain state. To investigate these switching dynamics under an electric field, we used in situ fluorescent X-ray induced Kossel line pattern measurements with synchrotron radiation. In addition, in situ inverse X-ray fluorescence holography (XFH) experiments revealed that atomic displacement occurred under an applied electric field. We attributed the atomic displacement to crystallographic tilting induced by a converse piezoelectric effect. Our findings provide important insights for the design of piezoelectric and ferroelectric materials and devices.
RESUMEN
The local structure of the two-dimensional van der Waals material, Fe5-xGeTe2, which exhibits unique structural/magnetic phase transitions, was investigated by Te K-edge extended X-ray absorption fine structure (EXAFS) and Te Kα X-ray fluorescence holography (XFH) over a wide temperature range. The formation of a trimer of Te atoms at low temperatures has been fully explored using these methods. An increase in the Te-Fe distance at approximately 150 K was suggested by EXAFS and presumably indicates the formation of a Te trimer. Moreover, XFH displayed clear atomic images of Te atoms. Additionally, the distance between the Te atoms shortened, as confirmed from the atomic images reconstructed from XFH, indicating the formation of a trimer of Te atoms, i.e., a charge-ordered superstructure. Furthermore, Te Kα XFH provided unambiguous atomic images of Fe atoms occupying the Fe1 site; the images were not clearly observed in the Ge Kα XFH that was previously reported because of the low occupancy of Fe and Ge atoms. In this study, EXAFS and XFH clearly showed the local structure around the Te atom; in particular, the formation of Te trimers caused by charge-ordered phase transitions was clearly confirmed. The charge-ordered phase transition is fully discussed based on the structural variation at low temperatures, as established from EXAFS and XFH.
RESUMEN
A cryostat was designed for x-ray fluorescence holography (XFH) experiments at low temperatures down to 4 K, where many functional materials show characteristic transitions, such as high-temperature superconducting, magnetic, dielectric, and valence transitions. For XFH measurements, changes in two angles of samples with respect to the incident synchrotron x-ray beam, i.e., incident angle θ and azimuthal angle Ï, are necessary. A low-temperature specialized small piezoelectric motor is installed at the cryostat head for Ï, and the cryostat itself is rotated by a stepping motor for θ. The heat from the piezoelectric motor for Ï and the cryostat power determining the total cryostat mass were optimized for the limited working spaces and beamtimes of synchrotron experiments. Some examples of the XFH results at low temperatures, such as a Pb crystal and an YbInCu4 valence transition material, are presented to show the feasibility of this low-temperature equipment.
RESUMEN
Local structures around impurities in solids provide important information for understanding the mechanisms of material functions, because most of them are controlled by dopants. For this purpose, the x-ray absorption fine structure method, which provides radial distribution functions around specific elements, is most widely used. However, a similar method using neutron techniques has not yet been developed. If one can establish a method of local structural analysis with neutrons, then a new frontier of materials science can be explored owing to the specific nature of neutron scattering-that is, its high sensitivity to light elements and magnetic moments. Multiple-wavelength neutron holography using the time-of-flight technique with pulsed neutrons has great potential to realize this. We demonstrated multiple-wavelength neutron holography using a Eu-doped CaF2 single crystal and obtained a clear three-dimensional atomic image around trivalent Eu substituted for divalent Ca, revealing an interesting feature of the local structure that allows it to maintain charge neutrality. The new holography technique is expected to provide new information on local structures using the neutron technique.
RESUMEN
Experimental procedure and setup for obtaining X-ray fluorescence hologram of crystalline metalloprotein samples are described. Human hemoglobin, an α2ß2 tetrameric metalloprotein containing the Fe(II) heme active-site in each chain, was chosen for this study because of its wealth of crystallographic data. A cold gas flow system was introduced to reduce X-ray radiation damage of protein crystals that are usually fragile and susceptible to damage. A χ-stage was installed to rotate the sample while avoiding intersection between the X-ray beam and the sample loop or holder, which is needed for supporting fragile protein crystals. Huge hemoglobin crystals (with a maximum size of 8 × 6 × 3 mm(3)) were prepared and used to keep the footprint of the incident X-ray beam smaller than the sample size during the entire course of the measurement with the incident angle of 0°-70°. Under these experimental and data acquisition conditions, we achieved the first observation of the X-ray fluorescence hologram pattern from the protein crystals with minimal radiation damage, opening up a new and potential method for investigating the stereochemistry of the metal active-sites in biomacromolecules.
Asunto(s)
Hemoglobinas/química , Holografía/métodos , Espectrometría por Rayos X/métodos , Dominio Catalítico , HumanosRESUMEN
X-ray fluorescence holography (XFH) is a method of atomic resolution holography which utilizes fluorescing atoms as a wave source or a monitor of the interference field within a crystal sample. It provides three-dimensional atomic images around a specified element and has a range of up to a few nm in real space. Because of this feature, XFH is expected to be used for medium-range local structural analysis, which cannot be performed by x-ray diffraction or x-ray absorption fine structure analysis. In this article, we explain the theory of XFH including solutions to the twin-image problem, an advanced measuring system, and data processing for the reconstruction of atomic images. Then, we briefly introduce our recent applications of this technique to the analysis of local lattice distortions in mixed crystals and nanometer-size clusters appearing in the low-temperature phase of a shape-memory alloy.