Characterization of changes in the electronic structure of platinum sub-nanoclusters supported on graphene induced by oxygen adsorption.

As the sizes of noble metal catalysts, such as platinum, have been successfully minimized, fundamental insights into the electronic properties of metal sub-nanoclusters are increasingly sought for optimizing their catalytic performance. However, it is difficult to rationalize the catalytic activities of metal sub-nanoclusters owing to their more complex electronic structure compared with those of small molecules and bulky solids. In this study, the adsorption of molecular oxygen on a Pt13 sub-nanocluster supported on a graphene layer was analyzed using density functional theory. Unlike bulk Pt, the Pt13 sub-nanocluster has multiple adsorption sites, and the adsorption energy depends strongly on the type of adsorption site. The O2 adsorption energy does not correlate with the transferred charge between O2 and the Pt13 moiety; therefore, to elucidate the differences in the adsorption sites, we propose an original approach for analyzing the electronic structure change in metal sub-nanoclusters caused by molecular adsorption. Our analysis of the integrated local density of state (LDOS) revealed that O2 adsorption on the Pt13 sub-nanocluster has a distinct feature, different from that on a smaller Pt2 cluster or rather a larger Pt slab. The change in the electronic structure of the Pt13 moiety was primarily observed near the Fermi level, different from that of the Pt slab whose DOS was distributed over a wide energy range. Furthermore, the change in the integrated LDOS correlated well with the O2 adsorption energy on the Pt13 sub-nanocluster.

A Multiconfigurational Wave Function Theoretical Study on Electronic Structure and Magnetic Susceptibility of Dilanthanide Single Molecule Magnet.

Single molecule magnets (SMMs) have been a promising material for next-generation high-density information storage and molecular spintronics. N23--bridged dilanthanide complexes, {[(Me3Si)2N]2Ln(THF)(µ-η2:η2-N2)(THF)Ln[(Me3Si)2N]2}1-, exhibit high blocking temperatures and have been one of the promising candidates for future application. Rational understanding should be established between the magnetic properties and electronic structure. However, the theoretical study is still challenging due to the complexities in their electronic structures. Here, we theoretically studied the magnetic susceptibility of dilanthanide SMMs based on the state-of-the-art multistate-complete active space self-consistent field and perturbation theory at the second order and restricted active space state interaction with spin-orbit coupling calculations. Temperature dependence of the magnetic susceptibility (χmT-T curve) was quantitatively reproduced by the theoretical calculations. The complexities in the electronic states of these dilanthanide complexes originate from significantly strong static electron correlations in the lanthanide 4f and N2 π* orbitals and the SOC effect. The temperature dependence of the magnetic susceptibility results from the energy levels and magnetic properties of the low-lying excited state. The χmT values below 50 K are dominated by the ground state, while thermal distribution in the low-lying excited state affects the χmT values over 50 K. Saturation magnetization at low temperatures was also evaluated, and the result agrees with the experimental observation.

Highly Enantioselective Radical Cation [2 + 2] and [4 + 2] Cycloadditions by Chiral Iron(III) Photoredox Catalysis.

Radical cations show a unique reactivity that is fundamentally different from that of conventional cations and have thus attracted considerable attention as alternative cationic intermediates for novel types of organic reactions. However, asymmetric catalysis to promote enantioselective radical cation reactions remains a major challenge in contemporary organic synthesis. Here, we report that the judicious design of an ion pair consisting of a radical cation and a chiral counteranion induces an excellent level of enantioselectivity. This strategy was applied to enantio-, diastereo-, and regioselective [2 + 2] cycloadditions, as well as enantio-, diastereo-, and regioselective [4 + 2] cycloadditions, by using chiral iron(III) photoredox catalysis. We anticipate that this strategy has the potential to expand the use of several mature chiral anions to develop numerous unprecedented enantioselective radical cation reactions.

Dynamic Behavior of Intermediate Adsorbates to Control Activity and Product Selectivity in Heterogeneous Catalysis: Methanol Decomposition on Pt/TiO2(110).

Dynamic behavior of intermediate adsorbates, such as diffusion, spillover, and reverse spillover, has a strong influence on the catalytic performance in oxide-supported metal catalysts. However, it is challenging to elucidate how the intermediate adsorbates move on the catalyst surface and find active sites to give the corresponding products. In this study, the effect of the dynamic behavior of methoxy intermediate on methanol decomposition on a Pt/TiO2(110) surface has been clarified by combination of scanning tunneling microscopy (STM), temperature-programmed desorption (TPD), and density functional theory (DFT) calculations. The methoxy intermediates were formed by the dissociative adsorption of methanol molecules on Pt nanoparticles at room temperature followed by spillover to the TiO2(110) support surface. TPD results showed that the methoxy intermediates were thermally decomposed at >350 K on the Pt sites to produce CO (dehydrogenation) and CH4 (C-O bond scission). A decrease of the Pt nanoparticle density lowered the activity for the decomposition reaction and increased the selectivity toward CH4, which indicates that the reaction is controlled by diffusion and reverse spillover of the methoxy intermediates. Time-lapse STM imaging and DFT calculations revealed that the methoxy intermediates migrate on the five-fold coordinated Ti (Ti5c) sites along the [001] or [11¯0] direction with the aid of hydrogen adatoms bonded to the bridging oxygens (Obr) and can move over the entire surface to seek and find active Pt sites. This work offers an in-depth understanding of the important role of intermediate adsorbate migration in the control of the catalytic performance in oxide-supported metal catalysts.

First-principles study on unidirectional proton transfer on anatase TiO2 (101) surface induced by external electric fields.

The electric field (EF) effect on hydrogen or proton transfer (PT) via hydroxyl groups on an anatase TiO2 (101) surface is examined using first-principles density functional theory and the modern theory of polarization. This study focuses on unidirectional surface PT caused by external EFs at various orientations toward the surface. The preferred PT pathway can change depending on the magnitude and direction of the EF. Detailed analysis reveals that the variation in the energy profile with the EF is significantly different from that determined by the classical electric work of an EF carrying a point charge. The EF effect on the energy profile of the PT is governed by the rearrangement of the chemical bond network at the interface between the water molecules and the surface.

Optimization of General Molecular Properties in the Equilibrium Geometry Using Quantum Alchemy: An Inverse Molecular Design Approach.

Inverse molecular design allows the optimization of molecules in chemical space and is promising for accelerating the development of functional molecules and materials. To design realistic molecules, it is necessary to consider geometric stability during optimization. In this work, we introduce an inverse design method that optimizes molecular properties by changing the chemical composition in the equilibrium geometry. The optimization algorithm of our recently developed molecular design method has been modified to allow molecular design for general properties at a low computational cost. The proposed method is based on quantum alchemy and does not require empirical data. We demonstrate the applicability and limitations of the present method in the optimization of the electric dipole moment and atomization energy in small chemical spaces for (BF, CO), (N2, CO), BN-doped benzene derivatives, and BN-doped butane derivatives. It was found that the optimality criteria scheme adopted for updating the molecular species yields faster convergence of the optimization and requires a less computational cost. Moreover, we also investigate and discuss the applicability of quantum alchemy to the electric dipole moment.

Iron/Photosensitizer Hybrid System Enables the Synthesis of Polyaryl-Substituted Azafluoranthenes.

Photosensitization of organometallics is a privileged strategy that enables challenging transformations in transition-metal catalysis. However, the usefulness of such photocatalyst-induced energy transfer has remained opaque in iron-catalyzed reactions despite the intriguing prospects of iron catalysis in synthetic chemistry. Herein, we demonstrate the use of iron/photosensitizer-cocatalyzed cycloaddition to synthesize polyarylpyridines and azafluoranthenes, which have been scarcely accessible using the established iron-catalyzed protocols. Mechanistic studies indicate that triplet energy transfer from the photocatalyst to a ferracyclic intermediate facilitates the thermally demanding nitrile insertion and accounts for the distinct reactivity of the hybrid system. This study thus provides the first demonstration of the role of photosensitization in overcoming the limitations of iron catalysis.

Photoinduced Copper-Catalyzed Asymmetric Acylation of Allylic Phosphates with Acylsilanes.

We report a visible-light-induced copper-catalyzed highly enantioselective umpolung allylic acylation reaction with acylsilanes as acyl anion equivalents. Triplet-quenching experiments and DFT calculations supported our reaction design, which is based on copper-to-acyl metal-to-ligand charge transfer (MLCT) photoexcitation that generates a charge-separated triplet state as a highly reactive intermediate. According to the calculations, the allylic phosphate substrate in the excited state undergoes novel molecular activation into an allylic radical weakly bound to the copper complex. The allyl radical fragment undergoes copper-mediated regio- and stereocontrolled coupling with the acyl group under the influence of the chiral N-heterocyclic carbene ligand.

Mechanism of BPh3 -Catalyzed N-Methylation of Amines with CO2 and Phenylsilane: Cooperative Activation of Hydrosilane.

BPh3 catalyzes the N-methylation of secondary amines and the C-methylenation (methylene-bridge formation between aromatic rings) of N,N-dimethylanilines or 1-methylindoles in the presence of CO2 and PhSiH3 ; these reactions proceed at 30-40 °C under solvent-free conditions. In contrast, B(C6 F5 )3 shows little or no activity. 11 B NMR spectra suggested the generation of [HBPh3 ]- . The detailed mechanism of the BPh3 -catalyzed N-methylation of N-methylaniline (1) with CO2 and PhSiH3 was studied by using DFT calculations. BPh3 promotes the conversion of two substrates (N-methylaniline and CO2 ) into a zwitterionic carbamate to give three-component species [Ph(Me)(H)N+ CO2 - ⋅⋅⋅BPh3 ]. The carbamate and BPh3 act as the nucleophile and Lewis acid, respectively, for the activation of PhSiH3 to generate [HBPh3 ]- , which is used to produce key CO2 -derived species, such as silyl formate and bis(silyl)acetal, essential for the N-methylation of 1. DFT calculations also suggested other mechanisms involving water for the generation of [HBPh3 ]- species.

Asymmetric Dehydrative Cyclization of Allyl Alcohol to Cyclic Ether Using Chiral Brønsted Acid/CpRu(II) Hybrid Catalysts: A DFT Study of the Origin of Enantioselectivity.

To elucidate the reaction mechanism and the origin of the enantioselectivity of the asymmetric dehydrative cyclization of allyl alcohol to cyclic ether catalyzed by a Cp-ruthenium complex and a chiral pyridinecarboxylic acid, (R)-X-Naph-PyCOOH, density functional theory (DFT) calculations were performed. According to the DFT calculations, the rate-determining step is the dehydrative σ-allyl formation step with ΔG‡ = 18.1 kcal mol-1 at 80 °C. This agrees well with the experimental data (ΔG‡ = 19.01 kcal mol-1 at 80 °C). The DFT result showed that both hydrogen and halogen bonds play a key role in the high enantioselectivity by facilitating the major R,SRu-catalyzed reaction pathway via a σ-allyl Ru intermediate to generate the major (S)-product. In contrast, the reaction is sluggish in the presence of the diastereomeric R,RRu catalyst with an apparent activation energy of 33.1 kcal mol-1; the minor (R)-product is formed via a typical π-allyl Ru intermediate and via a minor pathway for the cyclization step. In addition, the calculated activation Gibbs free energies, 14.4 kcal mol-1 for I < 16.8 kcal mol-1 for Br < 18.1 kcal mol-1 for Cl, reproduced the observed halogen-dependent reactivity with the (R)-X-Naph-PyCOOH ligands. The origin of the halogen trend was clarified by a structural decomposition analysis.

Selective Catalytic Reduction of NOx with NH3 by Using Novel Catalysts: State of the Art and Future Prospects.

Selective catalytic reduction with NH3 (NH3-SCR) is the most efficient technology to reduce the emission of nitrogen oxides (NOx) from coal-fired industries, diesel engines, etc. Although V2O5-WO3(MoO3)/TiO2 and CHA structured zeolite catalysts have been utilized in commercial applications, the increasing requirements for broad working temperature window, strong SO2/alkali/heavy metal-resistance, and high hydrothermal stability have stimulated the development of new-type NH3-SCR catalysts. This review summarizes the latest SCR reaction mechanisms and emerging poison-resistant mechanisms in the beginning and subsequently gives a comprehensive overview of newly developed SCR catalysts, including metal oxide catalysts ranging from VOx, MnOx, CeO2, and Fe2O3 to CuO based catalysts; acidic compound catalysts containing vanadate, phosphate and sulfate catalysts; ion exchanged zeolite catalysts such as Fe, Cu, Mn, etc. exchanged zeolite catalysts; monolith catalysts including extruded, washcoated, and metal-mesh/foam-based monolith catalysts. The challenges and opportunities for each type of catalysts are proposed while the effective strategies are summarized for enhancing the acidity/redox circle and poison-resistance through modification, creating novel nanostructures, exposing specific crystalline planes, constructing protective/sacrificial sites, etc. Some suggestions are given about future research directions that efforts should be made in. Hopefully, this review can bridge the gap between newly developed catalysts and practical requirements to realize their commercial applications in the near future.

Impact of tensile and compressive forces on the hydrolysis of cellulose and chitin.

Mechanochemistry enables unique reaction pathways in comparison to conventional thermal reactions. Notably, it can achieve selective hydrolysis of cellulose and chitin, a set of abundant and recalcitrant biomass, by solvent-free ball-milling in the presence of acid catalysts. Although the merits of mechanochemistry for this reaction are known, the reaction mechanism is still unclear. Here, we show how the mechanical forces produced by ball-milling activate the glycosidic bonds of carbohydrate molecules towards hydrolysis. This work uses experimental and theoretical evaluations to clarify the mechanism. The experimental results reveal that the ball-mill accelerates the hydrolysis by mechanical forces rather than local heat. Meanwhile, the classical and quantum mechanics calculations indicate the subnano to nano Newton order of tensile and compressive forces that activate polysaccharide molecules in the ball-milling process. Although previous studies have taken into account only the stretching of the molecules, our results show that compressive forces are stronger and effective for the activation of glycosidic bonds. Accordingly, in addition to stretching, compression is crucial for the mechanocatalytic reaction. Our work connects the classical physics of ball-milling on a macro scale with molecular activation at a quantum level, which would help to understand and control mechanochemical reactions.

On the Electronic Structure Origin of Mechanochemically Induced Selectivity in Acid-Catalyzed Chitin Hydrolysis.

Recently, mechanical ball milling was applied to chitin depolymerization. The mechanical activation afforded higher selectivity toward glycosidic bond cleavage over amide bond breakage. Hence, the bioactive N-acetylglucosamine (GlcNAc) monomer was preferentially produced over glucosamine. In this regard, the force-dependent mechanochemical activation-deactivation process in the relaxed and pulled GlcNAc dimer undergoing deacetylation and depolymerization reactions was studied. For the relaxed case, the activation energies of the rate-determining steps (RDS) proved that the two reactions could occur simultaneously. Mechanical forces associated with ball milling were approximated with linear pulling and were introduced explicitly in the RDS of both reactions through force-modified potential energy surface (FMPES) formalism. In general, as the applied pulling force increases, the activation energy of the RDS of deacetylation shows no meaningful change, while that of depolymerization decreases. This result is consistent with the selectivity exhibited in the experiment. Energy and structural analyses for the depolymerization showed that the activation can be attributed to a significant change in the glycosidic dihedral at the reactant state. A lone pair of the neighboring pyranose ring O adopts a syn-periplanar conformation relative to the glycosidic bond. This promotes electron donation to the σ*-orbital of the glycosidic bond, leading to activation. Consequently, the Brønsted-Lowry basicity of the glycosidic oxygen also increases, which can facilitate acid catalysis.

Spin-inversion mechanisms in O2 binding to a model heme compound: A perspective from nonadiabatic wave packet calculations.

Spin-inversion dynamics in O2 binding to a model heme complex, which consisted of Fe(II)-porphyrin and imidazole, were studied using nonadiabatic wave packet dynamics calculations. We considered three active nuclear degrees of freedom in the dynamics, including the motions along the Fe-O distance, Fe-O-O angle, and Fe out-of-plane distance. Spin-free potential energy surfaces for the singlet, triplet, quintet, and septet states were developed using density functional theory calculations, and spin-orbit coupling elements were obtained from CASSCF-level electronic structure calculations. The spin-inversion mainly occurred between the singlet state and one of the triplet states due to large spin-orbit couplings and the contributions of other states were extremely small. The present quantum dynamics calculations suggested that the narrow crossing region model plays a dominant role in the O2 binding dynamics. In addition, the one-dimensional Landau-Zener model underestimated the nonadiabatic transition probability.

Spin-inversion mechanisms in O2 binding to a model heme complex revisited by density function theory calculations.

Spin-inversion mechanisms in O2 binding to a model heme complex, consisting of Fe(II)-porphyrin and imidazole, were investigated using density-functional theory calculations. First, we applied the recently proposed mixed-spin Hamiltonian method to locate spin-inversion structures between different total spin multiplicities. Nine spin-inversion structures were successfully optimized for the singlet-triplet, singlet-quintet, triplet-quintet, and quintet-septet spin-inversion processes. We found that the singlet-triplet spin-inversion points are located around the potential energy surface region at short Fe-O distances, whereas the singlet-quintet and quintet-septet spin-inversion points are located at longer Fe-O distances. This suggests that both narrow and broad crossing models play roles in O2 binding to the Fe-porphyrin complex. To further understand spin-inversion mechanisms, we performed on-the-fly Born-Oppenheimer molecular dynamics calculations. The reaction coordinates, which are correlated to the spin-inversion dynamics between different spin multiplicities, are also discussed.

Delocalization Effect Promoted the Indoor Air Purification via Directly Unlocking the Ring-Opening Pathway of Toluene.

The ring-opening process was generally considered as the rate-determining step for aromatic volatile organic compound photocatalytic degradation. A sophisticated and intensive degradation pathway is critical to the poor removal efficiency and low mineralization. In the present contribution, we successfully tailored and identified the ring-opening pathway of toluene elimination by electron delocalization in a borocarbonitride photocatalyst. By means of modulation of the dopant coordination configuration and electron geometry in the catalyst, the lone electrons of carbon transform into delocalized counterparts, sequentially elevating the interaction between the toluene molecules and photocatalyst. The aromatic ring of toluene can be attacked directly in the effect of electron delocalization without engendering additional intermediate species, significantly facilitating the removal and mineralization of toluene. This unprecedented route-control strategy alters the aromatic-ring-based reaction behavior from toluene to CO2 and paves a way to purify the refractory pollutants from the top design.

Extending nudged elastic band method to reaction pathways involving multiple spin states.

There are diverse reactions including spin-state crossing, especially the reactions catalyzed by transition metal compounds. To figure out the mechanisms of such reactions, the discussion of minimum energy intersystem crossing (MEISC) points cannot be avoided. These points may be the bottleneck of the reaction or inversely accelerate the reactions by providing a better pathway. It is of great importance to reveal their role in the reactions by computationally locating the position of the MEISC points together with the reaction pathway. However, providing a proper initial guess for the structure of the MEISC point is not as easy as that of the transition state. In this work, we extended the nudged elastic band (NEB) method for multiple spin systems, which is named the multiple spin-state NEB method, and it is successfully applied to find the MEISC points while optimizing the reaction pathway. For more precisely locating the MEISC point, a revised approach was adopted. Meanwhile, our examples also suggest that special attention should be paid to the criterion to define an image optimized as the MEISC point.

Constraint structure optimization to a specific minimum using ionization energy.

A structure optimization method with ionization energy constraint is developed to explore structures with specific ionization energy. The Levine-Coe-Martínez penalty function (J Phys Chem B 2008, 112, 405) was adopted, and the penalty function includes a predefined core-ionization energy and inner-shell ionization energy. For an SN 2 reaction, isomerization of a platinum complex, a proton transfer reaction, and carbon monoxide adsorption on a palladium cluster, the present method was tested, and the targeted energy minima were obtained as designated by the input ionization energy. The shape of the objective function, the parameters in the penalty function, and structural changes during the optimization process were discussed. An automated parameter setting and possible problems are discussed for future direction. © 2018 Wiley Periodicals, Inc.

Theoretical Study on the Rhodium-Catalyzed Hydrosilylation of C═C and C═O Double Bonds with Tertiary Silane.

Reaction mechanisms of hydrosilylation of ketone and alkene with tertiary silane using the Wilkinson-type catalyst were theoretically investigated on the basis of density functional calculations using ωB97XD functional. Previously proposed three mechanisms, the Chalk-Harrod (CH) mechanism, the modified Chalk-Harrod (mCH) mechanism, and the outer-sphere mechanism were examined. Besides, we also found two mechanisms, the alternative CH (aCH) mechanism and the double hydride (DH) mechanism. In the aCH mechanism, a four-coordinate rhodium hydride complex formed through the elimination of R3Si-Cl is a catalytically active species. In the DH mechanism, the active species is a six-coordinate complex with two Rh-H bonds. For the C═O double bond hydrosilylation, the rate-determining steps of the aCH and DH mechanisms are both acetone insertion into the Rh-H bond, and the order of the activation barrier is DH < aCH ≈ CH < mCH. For the C═C double bond hydrosilylation, except for the mCH pathway whose rate-determining step is the hydrosilane addition reaction, the rate-determining steps of the CH, aCH, and DH pathways are Si-C reductive elimination reactions. The order of the energy barrier is DH ≈ mCH < aCH ≈ CH. In the outer-sphere mechanism, no stable intermediate or transition state was found. Consequently, we concluded that the DH mechanism is adopted as the mechanism for the Rh-catalyzed hydrosilylation of the carbonyl group while the mCH or DH mechanism is adopted as the mechanism for alkenes under conditions where their active intermediates are formed. The present result revises a hypothesis that the hydrosilylation of the carbonyl group is in general accomplished by the mCH mechanism. The active species in the DH mechanism has one more extra Rh-H bond compared to that of the other pathways, and its interaction with a silyl group, trans-influence, and small steric effect are the origin of the highly efficient catalytic activity, which was not reported before.

SO2-Tolerant Selective Catalytic Reduction of NO x over Meso-TiO2@Fe2O3@Al2O3 Metal-Based Monolith Catalysts.

It is an intractable issue to improve the low-temperature SO2-tolerant selective catalytic reduction (SCR) of NO x with NH3 because deposited sulfates are difficult to decompose below 300 °C. Herein, we established a low-temperature self-prevention mechanism of mesoporous-TiO2@Fe2O3 core-shell composites against sulfate deposition using experiments and density functional theory. The mesoporous TiO2-shell effectively restrained the deposition of FeSO4 and NH4HSO4 because of weak SO2 adsorption and promoted NH4HSO4 decomposition on the mesoporous-TiO2. The electron transfer at the Fe2O3 (core)-TiO2 (shell) interface accelerated the redox cycle, launching the "Fast SCR" reaction, which broadened the low-temperature window. Engineered from the nano- to macro-scale, we achieved one-pot self-installation of mesoporous-TiO2@Fe2O3 composites on the self-tailored AlOOH@Al-mesh monoliths. After the thermal treatment, the mesoporous-TiO2@Fe2O3@Al2O3 monolith catalyst delivered a broad window of 220-420 °C with NO conversion above 90% and had superior SO2 tolerance at 260 °C. The effective heat removal of Al-mesh monolithcatalysts restrained NH3 oxidation to NO and N2O while suppressing the decomposition of NH4NO3 to N2O, and this led to much better high-temperature activity and N2 selectivity. This work supplies a new point for the development of low-temperature SO2-tolerant monolithic SCR catalysts with high N2 selectivity, which is of great significance for both academic interests and practical applications.