Unilateral biportal endoscopic versus uniportal full-endoscopic for lumbar degenerative disease: A meta-analysis.

BACKGROUND: Despite the increasing use of unilateral biportal endoscopic (UBE) and uniportal full-endoscopic (UPFE) techniques in lumbar degenerative disease (LDD), few comprehensive and systematic studies have been published comparing UBE and UPFE. Therefore, we conducted a meta-analysis to compare the surgical outcomes of the two procedures. METHODS: We searched all studies that compared operative outcomes of UBE and UPFE for lumbar disc degeneration disease from PubMed, Google Scholar, Web of Science, Chinese Biomedical Literature Database, China National Knowledge Infrastructure (CNKI), Wanfang and other databases up to March 30, 2022. RESULTS: This meta-analysis, which included nine articles, showed that in operative time, (mean difference [MD]: 17.14; 95% confidence intervals [CI]: 6.52 to 27.76), intraoperative bleeding (MD: 59.01; 95% CI: 21.29 to 96.73) and hospital stay (MD: 2.12; 95% CI: 0.35 to 3.90), the UPFE group was more advantageous. UBE had an advantage in terms of postoperative dural expansion area (MD: 59.01; 95% CI: 21.29 to 96.73). These aspects included postoperative clinical score (MD: 0.48; 95% CI: -0.27 to 1.24; MD: -0.07; 95% CI: -0.30 to 0.16; MD: 0.09; 95% CI: -0.09 to 0.26; MD: 0.11; 95% CI: -0.04 to 0.26; MD: -0.81; 95% CI: -3.03 to 1.41; MD: -0.38; 95% CI: -1.02 to 0.26), excellent and good rate (odds ratio [OR] = 1.08; 95% CI: 0.34 to 3.44), complications (OR = 0.82; 95% CI: 0.31 to 2.12), postoperative hospital stay (MD: 1.63; 95% CI: -0.81 to 4.07) and mean number of fluoroscopies (MD: -7.18; 95% CI: -22.84 to 8.48), with no significant difference between the two groups. Meanwhile, the lumbar disc herniation (LDH) subgroup of UPFE had a significantly shorter operation time (MD: 31.67; 95% CI: 12.44 to 50.90) than that of UBE. CONCLUSION: Our study showed that UPFE was associated with shorter operative time, less intraoperative bleeding and shorter hospital stay, whereas UBE was associated with a greater increase in postoperative dural sac area. Postoperative visual analog scale (VAS) scores, Oswestry Disability Index (ODI) scores, satisfaction rates, complications, and mean number of fluoroscopic views were not dramatically dissimilar in UBE and UPFE for LDD. In the LDH subgroup, postoperative hospital stay and operative time were significantly lower in the UPFE group than in the UBE group.

Comparison of the Safety and Efficacy of Three-Dimensional Guiding Templates and Free Hand Technique for Cervical Pedicle Screw Fixation: A Retrospective Study.

Aim. To compare the safety and efficacy of computed tomography (CT)-assisted three-dimensional guiding templates (3DGTs) and free-hand (FH) technique for posterior cervical pedicle screw fixation in cervical spondylotic myelopathy (CSM) treatment. Methods. Thirty-five patients (216 screws) with CSM and developmental cervical stenosis were randomly divided into groups A (FH) and B (3DGTs). All patients underwent modified posterior surgery with cervical pedicle screw insertion (C1-7). Preoperative, postoperative, and intergroup comparisons of efficacy were evaluated using the visual analog scale (VAS), Japanese Orthopaedic Association (JOA), and Short Form 12 (SF-12) scores and JOA score improvement rate. Incidence of intra- and postoperative complications was analyzed. Postoperative cervical spine CT was performed to evaluate (i) the pedicle screws' deviation angle from the optimal path (sagittal deviation, α; coronal deviation angle, ß), screw insertion point's deviation distance (d), and screw accuracy and (ii) the deviation angle and distance of screw entrance point of pedicle screws from the optimal channel. Results. All patients successfully completed the procedures. Groups A and B did not significantly differ in age, sex ratio, body mass index, operative time, or intraoperative blood loss amount. Postoperative VAS, JOA, and SF-12 scores improved in both groups. VAS, JOA, or SF-12 scores did not significantly differ between the 2 groups. The α, ß, and d scores were lower in group B, but accuracy was higher in group B. Conclusions. 3DGTs and FH technique show comparable outcomes with respect to neurological improvement and safety.

Z-Type Ligand Enables Efficient and Stable Deep-Blue Perovskite Light-Emitting Diodes.

During the synthesis of deep-blue perovskite quantum dots (PQDs), they generally emerge as a two-dimensional byproduct with poor yield and low photoluminescence quantum yield (PLQY) due to amine ligand enrichment-induced abundant surface defects. Herein, we provide a colloidal synthesis method to prepare deep-blue CsPbBr3 PQDs in a green nontoxic solvent via strategic Z-type ligand engineering. Z-type ligands of zinc octanoate enable the formation of robust coordination bonds with surface bromide ions of PQDs, maintaining acid-base equilibrium and reducing excess amine enrichment on the PQDs surface. Consequently, homogeneous and monodispersed PQDs with improved PLQY of 73% are successfully synthesized, achieving efficient deep-blue LEDs with a peak EQE of 5.46%, a maximum luminance of 847.6 cd/m2, and an operational half-lifetime of 14 min. The devices exhibit color coordinates of (0.137, 0.049), closely approximating the Rec. 2020 blue standard. Our work offers a potentially eco-friendly and viable route for realizing high-performance LEDs in the deep-blue region.

Two-dimensional Cs3Sb2Br9 inducing transformation of three-dimensional CsPbBr3 to nanoplates.

This communication describes an effective morphological control strategy involving introducing two-dimensional (2D) Cs3Sb2Br9 to induce a transformation of three-dimensional (3D) CsPbBr3 to 2D nanoplates (NPLs). By tuning the Sb/Pb ratio, 2D CsPbBr3 NPLs exhibiting a deep-blue emission centered at a wavelength of 464 nm with an FWHM of 24 nm have been produced. The absence of organic ligands in these high-quality 2D NPLs mitigate the instability issue induced by organic ligand migration and penetration, and these NPLs exhibit 80% of the initial PL intensity after 55 days.

Percutaneous Curved Vertebroplasty and Bilateral-Pedicle-Approach Percutaneous Vertebroplasty in the Treatment of Osteoporotic Vertebral Compression Fracture: A Meta-Analysis.

Introduction: The aim of this study was to evaluate the use of percutaneous curved vertebroplasty procedure (PCVP) and bilateral-pedicle-approach percutaneous vertebroplasty (bPVP) for the treatment of osteoporotic vertebral compression fractures (OVCFs) through a systematic review and meta-analysis of the scientific literature. Methods: A systematic review of the scientific literature in PubMed, China National Knowledge Infrastructure (CNKI), Wanfang and other databases was conducted in conjunction with different keywords. Nine studies were included; all but 3 were randomised controlled studies and all were prospective or retrospective cohort studies. Results: We observed statistically significant differences between the PCVP group and the bPCVP group in terms of postoperative visual analogue scale (VAS) scores (mean difference [MD]: -.08; 95% confidence intervals [CI]: -.15 to .00), bone cement leakage rates (OR = .33; 95%CI: .20 to .54), bone cement injection (MD: -1.52; 95%CI: -1.58 to 1.45), operative times (MD: -16.69; 95%CI: -17.40 to -15.99) and intraoperative fluoroscopies (MD: -8.16; 95%CI: -9.56 to -6.67), with the PCVP group being more dominant. There were no statistical differences in postoperative Oswestry Disability Index (ODI) scores (MD: -.72; 95%CI: -2.11 to .67) and overall bone cement distribution rates (MD: 2.14; 95%CI: .99 to 4.65) between the 2 groups. Conclusions: Meta-analysis showed more favourable outcomes in the PCVP group compared to the bPVP group. PCVP might be effective and safe in the treatment of OVCFs because it relieves postoperative patient pain, reduces operative time and cement injection, and decreases the risk of cement leakage and radiation exposure to the surgeon and patient.

Stable deep-blue FAPbBr3 quantum dots facilitated by amorphous metal halide matrices.

This communication describes a strategy to synthesize stable deep blue FAPbBr3 quantum dots (QDs) by constructing a matrix structure. Amorphous Ni2+-based metal halide matrices can stabilize QDs from both chemical and physical factors, and Ni2+ doping can further enhance their structural stability due to lattice shrinking. Such deep blue QD films exhibit stable X-ray diffraction patterns and photoluminescence even after 245 days of storage.

Multidentate Ligand-Passivated CsPbI3 Perovskite Nanocrystals for Stable and Efficient Red-Light-Emitting Diodes.

CsPbI3 nanocrystals (NCs) have become a research hot spot in the field of light-emitting diodes (LEDs). Whereas, the long chain ligands with weak affinity to CsPbI3 NCs have prevented their further development and commercialization. Herein, a novel multidentate short ligand tetramethylthiuram disulfide (TMTD) was employed via a ligand exchange process to enhance hole mobility and decrease trap density of the CsPbI3 NCs film. Therefore, TMTD passivated CsPbI3 NCs LED exhibited 20.65% maximum external quantum efficiency and 3861 cd/m2 maximum luminance. Furthermore, TMTD passivated CsPbI3 NCs LED exhibited good operational stability with a 128 min half-lifetime. This strategy using multidentate short ligand passivation provides an effective way to promote perovskite LED development and commercialization.