3D (x-y-t) Raman imaging of tomato fruit cuticle: Microchemistry during development.

The cuticle is a protective extracellular matrix that covers the above-ground epidermis of land plants. Here, we studied the cuticle of tomato (Solanum lycopersicum L.) fruits in situ using confocal Raman microscopy. Microsections from cuticles isolated at different developmental stages were scanned to visualize cuticle components with a spatial resolution of 342 nm by univariate and multivariate data analysis. Three main components, cutin, polysaccharides, and aromatics, were identified, with the latter exhibiting the strongest Raman scattering intensity. Phenolic acids and flavonoids were differentiated within the cuticle, and three schematic cuticle models were identified during development. Phenolic acids were found across the entire cuticle at the earliest stage of development, i.e. during the formation of the procuticle layer. Based on a mixture analysis with reference component spectra, the phenolic acids were identified as mainly esterified p-coumaric acid together with free p-hydroxybenzoic acid. During the cell expansion period of growth, phenolic acids accumulated in an outermost layer of the cuticle and in the middle region of the pegs. In these stages of development, cellulose and pectin were detected next to the inner cuticle region, close to the epidermal cell where flavonoid impregnation started during ripening. In the first ripening stage, chalconaringenin was observed, while methoxylated chalcones were chosen by the algorithm to fit the mature cuticle spectra. The colocation of carbohydrates, esterified p-coumaric acid, and methoxylated chalconaringenin suggests that the latter two link polysaccharide and cutin domains. Elucidating the different distribution of aromatics within the cuticle, suggests important functions: (1) overall impregnation conferring mechanical and thermal functions (2) the outermost phenolic acid layer displaying UV-B protection of the plant tissue.

Synergic photoprotection of phenolic compounds present in tomato fruit cuticle: a spectroscopic investigation in solution.

Coumaric acids and flavonoids play pivotal roles in protecting plants against ultraviolet radiation (UVR) exposure. In this work, we focus our photoprotection studies on p-coumaric acid and the flavonoid naringenin chalcone. Photoprotection is well-understood in p-coumaric acid; in contrast, information surrounding photoprotection in naringenin chalcone is lacking. Additionally, and vitally, how these two species work in unison to provide photoprotection across the UV-B and UV-A is unknown. Herein, we employ transient absorption spectroscopy together with steady-state irradiation studies to unravel the photoprotection mechanism of a solution of p-coumaric acid and naringenin chalcone. We find that the excited state dynamics of p-coumaric acid are significantly altered in the presence of naringenin chalcone. This finding concurs with quenching of the p-coumaric acid fluorescence with increasing concentration of naringenin chalcone. We propose a Förster energy transfer mechanism is operative via the formation of dipole-dipole interactions between p-coumaric acid and naringenin chalcone. To our knowledge, this is the first demonstration in plants of a synergic effect between two classes of phenolics to bypass the potentially damaging effects of UVR.

Cutinsomes and CUTIN SYNTHASE1 Function Sequentially in Tomato Fruit Cutin Deposition.

The aerial parts of plants, including the leaves, fruits and non-lignified stems, are covered with a protective cuticle, largely composed of the polyester cutin. Two mechanisms of cutin deposition have been identified in tomato (Solanum lycopersicum) fruit. The contribution of each mechanism to cutin synthesis and deposition has shown a temporal and coordinated sequence that correlates with the two periods of organ growth, cell division and cell expansion. Cutinsomes, self-assembled particles composed of esterified cutin monomers, are involved in the synthesis of the procuticle during cell division and provide a template for further cutin deposition. CUTIN SYNTHASE1 (CUS1), an acyl transferase enzyme that links cutin monomers, contributes to massive cuticle deposition during the early stages of the cell expansion period by incorporating additional cutin to the procuticle template. However, cutin deposition and polymerization appear to be part of a more complex biological scenario, which is yet not fully understood. CUS1 is also associated with the coordinated growth of the cutinized and non-cutinized domains of the outer epidermal wall, and affects cell size. A dynamic and complex interplay linking cutin synthesis with cell wall development and epidermal cell size has been identified.

Structure, isomerization and dimerization processes of naringenin flavonoids.

In this study, the theoretical and experimental results on the molecular structure and reactivity of the plant flavonoids naringenin chalcone and naringenin are reported. UV-vis and Raman spectra were recorded and their main bands have been assigned theoretically. Moreover, the analysis of the naringenin chalcone-naringenin cyclization-isomerization reaction and the formation of homodimers and heterodimers have been performed within a DFT framework. The presence of H-bonded water networks is mandatory to make the cyclization energetically suitable, suggesting that this equilibrium will occur in an aqueous intracellular environment rather than in the extracellular and hydrophobic plant cuticles. Additionally, the preferential formation of homodimers stabilized by π-π stacking that will interact with other dimers by H-bonding over the formation of naringenin chalcone-naringenin heterodimers is also proposed in a hydrophobic environment. These results give a plausible model to explain how flavonoids are located within the cuticle molecular arrangement.

Analysis of CYP450 gene allelic variants can predict ifosfamide toxicity in Mexican paediatric patients.

Context: Ifosfamide (IFA) is an effective antineoplastic for solid tumours in children, although it is associated with high levels of systemic toxicity and causes death in some cases. Objective: The aim of this study was to determine whether the presence of certain allelic variants of genes CYP2B6, CYP2C9, CYP3A4 and CYP3A5 increases the risk of toxicity in children with solid tumours treated with ifosfamide.Materials and methods: A total of 131 DNA samples were genotyped by real-time polymerase chain reaction (RT-PCR) using TaqMan probes. Toxicity was assessed using WHO criteria, and survival analysis was performed using Kaplan-Meier curves.Results: The rs3745274 allelic variant in CYP2B6 was associated with haematological toxicity, affecting neutrophils; CYP3A4 variant rs2740574 was also associated with toxicity, affecting both leukocytes and neutrophils. Additionally, the CYP3A5 gene variant rs776746 was found to affect haemoglobin.Conclusions: Our results show that allelic variants rs3745274 (CYP2B6), rs2740574 (CYP34) and rs776746 (CYP3A5) increase the risk for high haematological toxicity.Clinical trial registration: 068/2013.

Plant cuticle under global change: Biophysical implications.

Climatic stressors due to global change induce important modifications to the chemical composition of plant cuticles and their biophysical properties. In particular, plant cuticles can become heavier, stiffer and more inert, improving plant protection.

Ultrastructure of the Epidermal Cell Wall and Cuticle of Tomato Fruit (Solanum lycopersicum L.) during Development.

The epidermis plays a pivotal role in plant development and interaction with the environment. However, it is still poorly understood, especially its outer epidermal wall: a singular wall covered by a cuticle. Changes in the cuticle and cell wall structures are important to fully understand their functions. In this work, an ultrastructure and immunocytochemical approach was taken to identify changes in the cuticle and the main components of the epidermal cell wall during tomato fruit development. A thin and uniform procuticle was already present before fruit set. During cell division, the inner side of the procuticle showed a globular structure with vesicle-like particles in the cell wall close to the cuticle. Transition between cell division and elongation was accompanied by a dramatic increase in cuticle thickness, which represented more than half of the outer epidermal wall, and the lamellate arrangement of the non-cutinized cell wall. Changes in this non-cutinized outer wall during development showed specific features not shared with other cell walls. The coordinated nature of the changes observed in the cuticle and the epidermal cell wall indicate a deep interaction between these two supramolecular structures. Hence, the cuticle should be interpreted within the context of the outer epidermal wall.

Cutin from agro-waste as a raw material for the production of bioplastics.

Cutin is the main component of plant cuticles constituting the framework that supports the rest of the cuticle components. This biopolymer is composed of esterified bi- and trifunctional fatty acids. Despite its ubiquity in terrestrial plants, it has been underutilized as raw material due to its insolubility and lack of melting point. However, in recent years, a few technologies have been developed to obtain cutin monomers from several agro-wastes at an industrial scale. This review is focused on the description of cutin properties, biodegradability, chemical composition, processability, abundance, and the state of art of the fabrication of cutin-based materials in order to evaluate whether this biopolymer can be considered a source for the production of renewable materials.

QTL mapping of fruit mineral contents provides new chances for molecular breeding of tomato nutritional traits.

KEY MESSAGE: Agronomical characterization of a RIL population for fruit mineral contents allowed for the identification of QTL controlling these fruit quality traits, flanked by co-dominant markers useful for marker-assisted breeding. Tomato quality is a multi-variant attribute directly depending on fruit chemical composition, which in turn determines the benefits of tomato consumption for human health. Commercially available tomato varieties possess limited variability in fruit quality traits. Wild species, such as Solanum pimpinellifolium, could provide different nutritional advantages and can be used for tomato breeding to improve overall fruit quality. Determining the genetic basis of the inheritance of all the traits that contribute to tomato fruit quality will increase the efficiency of the breeding program necessary to take advantage of the wild species variability. A high-density linkage map has been constructed from a recombinant inbred line (RIL) population derived from a cross between tomato Solanum lycopersicum and the wild-relative species S. pimpinellifolium. The RIL population was evaluated for fruit mineral contents during three consecutive growing seasons. The data obtained allowed for the identification of main QTL and novel epistatic interaction among QTL controlling fruit mineral contents on the basis of a multiple-environment analysis. Most of the QTL were flanked by candidate genes providing valuable information for both tomato breeding for new varieties with novel nutritional properties and the starting point to identify the genes underlying these QTL, which will help to reveal the genetic basis of tomato fruit nutritional properties.

Cutinsomes as building-blocks of Arabidopsis thaliana embryo cuticle.

Cutinsomes, spherical nanoparticles containing cutin mono- and oligomers, are engaged in cuticle formation. Earlier they were revealed to participate in cuticle biosynthesis in Solanum lycopersicum fruit and Ornithogalum umbellatum ovary epidermis. Here, transmission electron microscopy (TEM) and immunogold labeling with antibody against the cutinsomes were applied to aerial cotyledon epidermal cells of Arabidopsis thaliana mature embryos. TEM as well as gold particles conjugated with the cutinsome antibody revealed these structures in the cytoplasm, near the plasmalemma, in the cell wall and incorporated into the cuticle. Thus, the cutinsomes most probably are involved in the formation of A. thaliana embryo cuticle and this model plant is another species in which these specific structures participate in the building of cuticle in spite of the lack of the lipotubuloid metabolon. In addition, a mechanism of plant cuticle lipid biosynthesis based on current knowledge is proposed.

Transcriptional Activity of the MADS Box ARLEQUIN/TOMATO AGAMOUS-LIKE1 Gene Is Required for Cuticle Development of Tomato Fruit.

Fruit development and ripening entail key biological and agronomic events, which ensure the appropriate formation and dispersal of seeds and determine productivity and yield quality traits. The MADS box gene Arlequin/tomato Agamous-like1 (hereafter referred to as TAGL1) was reported as a key regulator of tomato (Solanum lycopersicum) reproductive development, mainly involved in flower development, early fruit development, and ripening. It is shown here that silencing of the TAGL1 gene (RNA interference lines) promotes significant changes affecting cuticle development, mainly a reduction of thickness and stiffness, as well as a significant decrease in the content of cuticle components (cutin, waxes, polysaccharides, and phenolic compounds). Accordingly, overexpression of TAGL1 significantly increased the amount of cuticle and most of its components while rendering a mechanically weak cuticle. Expression of the genes involved in cuticle biosynthesis agreed with the biochemical and biomechanical features of cuticles isolated from transgenic fruits; it also indicated that TAGL1 participates in the transcriptional control of cuticle development mediating the biosynthesis of cuticle components. Furthermore, cell morphology and the arrangement of epidermal cell layers, on whose activity cuticle formation depends, were altered when TAGL1 was either silenced or constitutively expressed, indicating that this transcription factor regulates cuticle development, probably through the biosynthetic activity of epidermal cells. Our results also support cuticle development as an integrated event in the fruit expansion and ripening processes that characterize fleshy-fruited species such as tomato.

Transient silencing of CHALCONE SYNTHASE during fruit ripening modifies tomato epidermal cells and cuticle properties.

Tomato (Solanum lycopersicum) fruit ripening is accompanied by an increase in CHALCONE SYNTHASE (CHS) activity and flavonoid biosynthesis. Flavonoids accumulate in the cuticle, giving its characteristic orange color that contributes to the eventual red color of the ripe fruit. Using virus-induced gene silencing in fruits, we have down-regulated the expression of SlCHS during ripening and compared the cuticles derived from silenced and nonsilenced regions. Silenced regions showed a pink color due to the lack of flavonoids incorporated to the cuticle. This change in color was accompanied by several other changes in the cuticle and epidermis. The epidermal cells displayed a decreased tangential cell width; a decrease in the amount of cuticle and its main components, cutin and polysaccharides, was also observed. Flavonoids dramatically altered the cuticle biomechanical properties by stiffening the elastic and viscoelastic phase and by reducing the ability of the cuticle to deform. There seemed to be a negative relation between SlCHS expression and wax accumulation during ripening that could be related to the decreased cuticle permeability to water observed in the regions silencing SlCHS. A reduction in the overall number of ester linkages present in the cutin matrix was also dependent on the presence of flavonoids.

Wettability, polarity, and water absorption of holm oak leaves: effect of leaf side and age.

Plant trichomes play important protective functions and may have a major influence on leaf surface wettability. With the aim of gaining insight into trichome structure, composition, and function in relation to water-plant surface interactions, we analyzed the adaxial and abaxial leaf surface of holm oak (Quercus ilex) as a model. By measuring the leaf water potential 24 h after the deposition of water drops onto abaxial and adaxial surfaces, evidence for water penetration through the upper leaf side was gained in young and mature leaves. The structure and chemical composition of the abaxial (always present) and adaxial (occurring only in young leaves) trichomes were analyzed by various microscopic and analytical procedures. The adaxial surfaces were wettable and had a high degree of water drop adhesion in contrast to the highly unwettable and water-repellent abaxial holm oak leaf sides. The surface free energy and solubility parameter decreased with leaf age, with higher values determined for the adaxial sides. All holm oak leaf trichomes were covered with a cuticle. The abaxial trichomes were composed of 8% soluble waxes, 49% cutin, and 43% polysaccharides. For the adaxial side, it is concluded that trichomes and the scars after trichome shedding contribute to water uptake, while the abaxial leaf side is highly hydrophobic due to its high degree of pubescence and different trichome structure, composition, and density. Results are interpreted in terms of water-plant surface interactions, plant surface physical chemistry, and plant ecophysiology.

Lipotubuloids in ovary epidermis of Ornithogalum umbellatum act as metabolons: suggestion of the name 'lipotubuloid metabolon'.

A metabolon is a temporary, structural-functional complex formed between sequential metabolic enzymes and cellular elements. Cytoplasmic domains called lipotubuloids are present in Ornithogalum umbellatum ovary epidermis. They consist of numerous lipid bodies entwined with microtubules, polysomes, rough endoplasmic reticulum (RER), and actin filaments connected to microtubules through myosin and kinesin. A few mitochondria, Golgi structures, and microbodies are also observed and also, at later development stages, autolytic vacuoles. Each lipotubuloid is surrounded by a tonoplast as it invaginates into a vacuole. These structures appear in young cells, which grow intensively reaching 30-fold enlargement but do not divide. They also become larger due to an increasing number of lipid bodies formed in the RER by the accumulation of lipids between leaflets of the phospholipid bilayer. When a cell ceases to grow, the lipotubuloids disintegrate into individual structures. Light and electron microscope studies using filming techniques, autoradiography with [(3)H]palmitic acid, immunogold labelling with antibodies against DGAT2, phospholipase D1 and lipase, and double immunogold labelling with antibodies against myosin and kinesin, as well as experiments with propyzamide, a microtubule activity inhibitor, have shown that lipotubuloids are functionally and structurally integrated metabolons [here termed lipotubuloid metabolons (LMs)] occurring temporarily in growing cells. They synthesize lipids in lipid bodies in cooperation with microtubules. Some of these lipids are metabolized and used by the cell as nutrients, and others are transformed into cuticle whose formation is mediated by cutinsomes. The latter were discovered in planta using specific anti-cutinsome antibodies visualized by gold labelling. Moreover, LMs are able to rotate autonomously due to the interaction of microtubules, actin filaments, and motor proteins, which influence microtubules by changing their diameter.

Biomechanical properties of the tomato (Solanum lycopersicum) fruit cuticle during development are modulated by changes in the relative amounts of its components.

In this study, growth-dependent changes in the mechanical properties of the tomato (Solanum lycopersicum) cuticle during fruit development were investigated in two cultivars with different patterns of cuticle growth and accumulation. The mechanical properties were determined in uniaxial tensile tests using strips of isolated cuticles. Changes in the functional groups of the cuticle chemical components were analysed by attenuated total reflectance-Fourier transform infrared (ATR-FTIR). The early stages of fruit growth are characterized by an elastic cuticle, and viscoelastic behaviour only appeared at the beginning of cell enlargement. Changes in the cutin:polysaccharide ratio during development affected the strength required to achieve viscoelastic deformation. The increase in stiffness and decrease in extensibility during ripening, related to flavonoid accumulation, were accompanied by an increase in cutin depolymerization as a result of a reduction in the overall number of ester bonds. Quantitative changes in cuticle components influence the elastic/viscoelastic behaviour of the cuticle. The cutin:polysaccharide ratio modulates the stress required to permanently deform the cuticle and allow cell enlargement. Flavonoids stiffen the elastic phase and reduce permanent viscoelastic deformation. Ripening is accompanied by a chemical cleavage of cutin ester bonds. An infrared (IR) band related to phenolic accumulation can be used to monitor changes in the cutin esterification index.

Factors influencing fruit cracking: an environmental and agronomic perspective.

Fruit cracking, a widespread physiological disorder affecting various fruit crops and vegetables, has profound implications for fruit quality and marketability. This mini review delves into the multifaceted factors contributing to fruit cracking and emphasizes the pivotal roles of environmental and agronomic factors in its occurrence. Environmental variables such as temperature, relative humidity, and light exposure are explored as determinants factors influencing fruit cracking susceptibility. Furthermore, the significance of mineral nutrition and plant growth regulators in mitigating fruit cracking risk is elucidated, being calcium deficiency identified as a prominent variable in various fruit species. In recent years, precision farming and monitoring systems have emerged as valuable tools for managing environmental factors and optimizing fruit production. By meticulously tracking parameters such as temperature, humidity, soil moisture, and fruit skin temperature, growers can make informed decisions to prevent or alleviate fruit cracking. In conclusion, effective prevention of fruit cracking necessitates a comprehensive approach that encompasses both environmental and agronomic factors.

Revalorization of Yerba Mate Residues: Biopolymers-Based Films of Dual Wettability as Potential Mulching Materials.

Biodegradable mulching films are a very attractive solution to agronomical practices intended to achieve more successful crop results. And, in this context, the employment of agricultural and industrial food residues as starting material for their production is an alternative with economic and environmental advantages. This work reports the preparation of bilayer films having two different wettability characteristics from three bio-derived biopolymers: TEMPO-oxidized cellulose nanofibers isolated from infused Yerba Mate residues, Chitosan and Polylactic acid. The infused Yerba Mate residues, the isolated and oxidized cellulose nanofibers, and the films were characterized. Nanofibrillation yield, optical transmittance, cationic demand, carboxyl content, intrinsic viscosity, degree of polymerization, specific surface area and length were studied for the (ligno)cellulose nanofibers. Textural and chemical analysis, thermal and mechanical properties studies, as well as water and light interactions were included in the characterization of the films. The bilayer films are promising materials to be used as mulching films.

New insights into the properties of pubescent surfaces: peach fruit as a model.

The surface of peach (Prunus persica 'Calrico') is covered by a dense indumentum, which may serve various protective purposes. With the aim of relating structure to function, the chemical composition, morphology, and hydrophobicity of the peach skin was assessed as a model for a pubescent plant surface. Distinct physicochemical features were observed for trichomes versus isolated cuticles. Peach cuticles were composed of 53% cutan, 27% waxes, 23% cutin, and 1% hydroxycinnamic acid derivatives (mainly ferulic and p-coumaric acids). Trichomes were covered by a thin cuticular layer containing 15% waxes and 19% cutin and were filled by polysaccharide material (63%) containing hydroxycinnamic acid derivatives and flavonoids. The surface free energy, polarity, and work of adhesion of intact and shaved peach surfaces were calculated from contact angle measurements of water, glycerol, and diiodomethane. The removal of the trichomes from the surface increased polarity from 3.8% (intact surface) to 23.6% and decreased the total surface free energy chiefly due to a decrease on its nonpolar component. The extraction of waxes and the removal of trichomes led to higher fruit dehydration rates. However, trichomes were found to have a higher water sorption capacity as compared with isolated cuticles. The results show that the peach surface is composed of two different materials that establish a polarity gradient: the trichome network, which has a higher surface free energy and a higher dispersive component, and the cuticle underneath, which has a lower surface free energy and higher surface polarity. The significance of the data concerning water-plant surface interactions is discussed within a physiological context.

Tomato fruit continues growing while ripening, affecting cuticle properties and cracking.

Fruit cuticle composition and their mechanical performance have a special role during ripening because internal pressure is no longer sustained by the degraded cell walls of the pericarp but is directly transmitted to epidermis and cuticle which could eventually crack. We have studied fruit growth, cuticle modifications and its biomechanics, and fruit cracking in tomato; tomato has been considered a model system for studying fleshy fruit growth and ripening. Tomato fruit cracking is a major disorder that causes severe economic losses and, in cherry tomato, crack appearance is limited to the ripening process. As environmental conditions play a crucial role in fruit growing, ripening and cracking, we grow two cherry tomato cultivars in four conditions of radiation and relative humidity (RH). High RH and low radiation decreased the amount of cuticle and cuticle components accumulated. No effect of RH in cuticle biomechanics was detected. However, cracked fruits had a significantly less deformable (lower maximum strain) cuticle than non-cracked fruits. A significant and continuous fruit growth from mature green to overripe has been detected with special displacement sensors. This growth rate varied among genotypes, with cracking-sensitive genotypes showing higher growth rates than cracking-resistant ones. Environmental conditions modified this growth rate during ripening, with higher growing rates under high RH and radiation. These conditions corresponded to those that favored fruit cracking. Fruit growth rate during ripening, probably sustained by an internal turgor pressure, is a key parameter in fruit cracking, because fruits that ripened detached from the vine did not crack.