Encapsulated Rose Bengal Enhances the Photodynamic Treatment of Triple-Negative Breast Cancer Cells.

Among breast cancer subtypes, triple-negative breast cancer stands out as the most aggressive, with patients facing a 40% mortality rate within the initial five years. The limited treatment options and unfavourable prognosis for triple-negative patients necessitate the development of novel therapeutic strategies. Photodynamic therapy (PDT) is an alternative treatment that can effectively target triple-negative neoplastic cells such as MDA-MB-231. In this in vitro study, we conducted a comparative analysis of the PDT killing rate of unbound Rose Bengal (RB) in solution versus RB-encapsulated chitosan nanoparticles to determine the most effective approach for inducing cytotoxicity at low laser powers (90 mW, 50 mW, 25 mW and 10 mW) and RB concentrations (50 µg/mL, 25 µg/mL, 10 µg/mL and 5 µg/mL). Intracellular singlet oxygen production and cell uptake were also determined for both treatment modalities. Dark toxicity was also assessed for normal breast cells. Despite the low laser power and concentration of nanoparticles (10 mW and 5 µg/mL), MDA-MB-231 cells experienced a substantial reduction in viability (8 ± 1%) compared to those treated with RB solution (38 ± 10%). RB nanoparticles demonstrated higher singlet oxygen production and greater uptake by cancer cells than RB solutions. Moreover, RB nanoparticles display strong cytocompatibility with normal breast cells (MCF-10A). The low activation threshold may be a crucial advantage for specifically targeting malignant cells in deep tissues.

Nutraceuticals in Bulk and Dosage Forms: Analysis by 35Cl and 14N Solid-State NMR and DFT Calculations.

This study uses 35Cl and 14N solid-state NMR (SSNMR) spectroscopy and dispersion-corrected plane-wave density functional theory (DFT) calculations for the structural characterization of chloride salts of nutraceuticals in their bulk and dosage forms. For eight nutraceuticals, we measure the 35Cl EFG tensor parameters of the chloride ions and use plane-wave DFT calculations to elucidate relationships between NMR parameters and molecular-level structure, which provide rapid NMR crystallographic assessments of structural features. We employ both 35Cl direct excitation and 1H→35Cl cross-polarization methods to characterize a dosage form containing α-d-glucosamine HCl, observe possible impurity and/or adulterant phases, and quantify the weight percent of the active ingredient. To complement this, we also investigate 14N SSNMR spectroscopy and DFT calculations to characterize nitrogen atoms in the nutraceuticals. This includes a discussion of targeted acquisition experimental protocols (i.e., acquiring a select region of the overall pattern that features key discontinuities) that allow ultrawideline spectra to be acquired rapidly, even for unreceptive samples (i.e., those with long values of T1(14N), short values of T2eff(14N), or very broad patterns). It is hoped that these experimental and computational protocols will be useful for the characterization of various solid forms of nutraceuticals (i.e., salts, polymorphs, hydrates, solvates, cocrystals, amorphous solid dispersions, etc.), help detect impurity and counterfeit solid phases in dosage forms, and serve as a foundation for future NMR crystallographic studies of nutraceutical solid forms, including studies using ab initio crystal structure prediction algorithms.

Nontargeted Identification of Plasma Proteins O-, N-, and S-Transmethylated by O-Methyl Organophosphates.

Organophosphates (OPs) are used worldwide as pesticides. However, acute and chronic exposure to OPs can cause serious adverse health effects. The mechanism of delayed OP toxicity is thought to involve off-target inhibition of serine proteases, although the precise molecular details remain unclear owing to the lack of an analytical method for global detection of protein targets of OPs. Here, we report the development of a mass spectrometry method to identify OP-adducted proteins from complex mixtures in a nontargeted manner. Human plasma was incubated with the OP dichlorvos that was 50% isotopically labeled and 50% unlabeled. Proteins and protein adducts were extracted, digested, and analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) to detect "twin ions" of peptides that were covalently modified by a chemical reaction with dichlorvos. The LC-MS/MS data were processed by a blended data analytics software (Xenophile) to detect the amino acid residue sites of proteins that were covalently modified by exposure to OPs. We discovered that OPs can transmethylate the N, S, and O side chains of His, Cys, Glu, Asp, and Lys residues. For model systems, such transmethylation reactions were confirmed by LC-MS, nuclear magnetic resonance (NMR), and rationalized using electronic structure calculations. Methylation of the ubiquitous antioxidant glutathione by dichlorvos can decrease the reducing/oxidizing equilibrium of glutathione in liver extracts, which has been implicated in diseases and pathological conditions associated with delayed OP toxicity.

Qualitative and quantitative 1 H NMR spectroscopy for determination of divalent metal cation concentration in model salt solutions, food supplements, and pharmaceutical products by using EDTA as chelating agent.

This paper introduces an 1 H NMR method to identify individual divalent metal cations Be2+ , Mg2+ , Ca2+ , Sr2+ , Zn2+ , Cd2+ , Hg2+ , Sn2+ , and Pb2+ in aqueous salt solutions through their unique signal shift and coupling after complexation with the salt of ethylenediaminetetraacetic acid (EDTA). Furthermore, quantitative determination applied for the divalent metal cations Ca2+ , Mg2+ , Hg2+ , Sn2+ , Pb2+ , and Zn2+ (limit of quantification: 5-22 µg/ml) can be achieved using an excess of EDTA with aqueous model salt solutions. An internal standard is not required because a known excess of EDTA is added and the remaining free EDTA can be used to recalculate the quantity of chelated metal cations. The utility of the method is demonstrated for the analysis of divalent cations in some food supplements and in pharmaceutical products.

The value of universally available raw NMR data for transparency, reproducibility, and integrity in natural product research.

Covering: up to 2018With contributions from the global natural product (NP) research community, and continuing the Raw Data Initiative, this review collects a comprehensive demonstration of the immense scientific value of disseminating raw nuclear magnetic resonance (NMR) data, independently of, and in parallel with, classical publishing outlets. A comprehensive compilation of historic to present-day cases as well as contemporary and future applications show that addressing the urgent need for a repository of publicly accessible raw NMR data has the potential to transform natural products (NPs) and associated fields of chemical and biomedical research. The call for advancing open sharing mechanisms for raw data is intended to enhance the transparency of experimental protocols, augment the reproducibility of reported outcomes, including biological studies, become a regular component of responsible research, and thereby enrich the integrity of NP research and related fields.

Correction: The value of universally available raw NMR data for transparency, reproducibility, and integrity in natural product research.

Correction for 'The value of universally available raw NMR data for transparency, reproducibility, and integrity in natural product research' by James B. McAlpine et al., Nat. Prod. Rep., 2018, DOI: .

Superphenylphosphines: Nanographene-Based Ligands That Control Coordination Geometry and Drive Supramolecular Assembly.

Tertiary phosphines remain widely utilized in synthesis, most notably as supporting ligands in metal complexes. A series of triarylphosphines bearing one to three hexa-peri-hexabenzocoronene (HBC) substituents has been prepared by an efficient divergent route. These "superphenylphosphines", P{HBC(t-Bu)5}nPh3-n (n = 1-3), form the palladium complexes PdCl2L2 and Pd2Cl4L2 where the isomer distribution in solution is dependent on the number of HBC substituents. The crystalline structures of five complexes all show intramolecular π-stacking between HBC-phosphines to form a supramolecular bidentate-like ligand that distorts the metal coordination geometry. When n = 2 or 3, the additional HBC substituents engage in intermolecular π-stacking to assemble the complexes into continuous ribbons or sheets. The phosphines adopt HBC's characteristics including strong optical absorption, green emission, and redox activity.

From Lead(II) Dithiocarbamate Precursors to a Fast Response PbS Positive Temperature Coefficient Thermistor.

PbS submicron crystals were formed by thermolysis of two different lead dithiocarbamate complexes. These precursors were readily synthesized and fully characterized, and in situ synchrotron powder diffraction experiments were performed to characterize their decomposition. The structure and purity of resultant PbS was examined using scanning electron and transmission electron microscopies, powder X-ray diffraction, and infrared spectroscopy. Submicron crystalline PbS was used to create a new PbS thermistor with excellent sensitivity and an ultrarapid thermal response time.

Dynamic Nuclear Polarization NMR Spectroscopy of Polymeric Carbon Nitride Photocatalysts: Insights into Structural Defects and Reactivity.

Metal-free polymeric carbon nitrides (PCNs) are promising photocatalysts for solar hydrogen production, but their structure-photoactivity relationship remains elusive. Two PCNs were characterized by dynamic-nuclear-polarization-enhanced solid-state NMR spectroscopy, which circumvented the need for specific labeling with either 13 C- or 15 N-enriched precursors. Rapid 1D and 2D data acquisition was possible, providing insights into the structural contrasts between the PCNs. Compared to PCN_B with lower performance, PCN_P is a more porous and more active photocatalyst that is richer in terminal N-H bonds not associated with interpolymer chains. It is proposed that terminal N-H groups act as efficient carrier traps and reaction sites.

Mineral-Biochar Composites: Molecular Structure and Porosity.

Dramatic changes in molecular structure, degradation pathway, and porosity of biochar are observed at pyrolysis temperatures ranging from 250 to 550 °C when bamboo biomass is pretreated by iron-sulfate-clay slurries (iron-clay biochar), as compared to untreated bamboo biochar. Electron microscopy analysis of the biochar reveals the infusion of mineral species into the pores of the biochar and the formation of mineral nanostructures. Quantitative (13)C nuclear magnetic resonance (NMR) spectroscopy shows that the presence of the iron clay prevents degradation of the cellulosic fraction at pyrolysis temperatures of 250 °C, whereas at higher temperatures (350-550 °C), the clay promotes biomass degradation, resulting in an increase in both the concentrations of condensed aromatic, acidic, and phenolic carbon species. The porosity of the biochar, as measured by NMR cryoporosimetry, is altered by the iron-clay pretreatment. In the presence of the clay, at lower pyrolysis temperatures, the biochar develops a higher pore volume, while at higher temperature, the presence of clay causes a reduction in the biochar pore volume. The most dramatic reduction in pore volume is observed in the kaolinite-infiltrated biochar at 550 °C, which is attributed to the blocking of the mesopores (2-50 nm pore) by the nonporous metakaolinite formed from kaolinite.

NMR spectroscopy to follow reaction progress in ionic liquids.

In order to understand reaction outcomes in ionic liquids, it is crucial to be able to follow the progress of these reactions. This review highlights the advantages of NMR spectroscopy over other analytical techniques in following reaction progress in ionic liquids, particularly addressing the practical aspects of the methodology and highlighting the range of processes that can be readily followed. Copyright © 2014 John Wiley & Sons, Ltd.

Evidence of Decoupling Protein Structure from Spidroin Expression in Spider Dragline Silks.

The exceptional strength and extensibility of spider dragline silk have been thought to be facilitated by two spidroins, major ampullate spidroin 1 (MaSp1) and major ampullate spidroin 2 (MaSp2), under the assumption that protein secondary structures are coupled with the expressed spidroins. We tested this assumption for the dragline silk of three co-existing Australian spiders, Argiope keyserlingi, Latrodectus hasselti and Nephila plumipes. We found that silk amino acid compositions did not differ among spiders collected in May. We extended these analyses temporally and found the amino acid compositions of A. keyserlingi silks to differ when collected in May compared to November, while those of L. hasselti did not. To ascertain whether their secondary structures were decoupled from spidroin expression, we performed solid-state nuclear magnetic resonance spectroscopy (NMR) analysis on the silks of all spiders collected in May. We found the distribution of alanine toward ß-sheet and 3,10helix/random coil conformations differed between species, as did their relative crystallinities, with A. keyserlingi having the greatest 3,10helix/random coil composition and N. plumipes the greatest crystallinity. The protein secondary structures correlated with the mechanical properties for each of the silks better than the amino acid compositions. Our findings suggested that a differential distribution of alanine during spinning could decouple secondary structures from spidroin expression ensuring that silks of desirable mechanical properties are consistently produced. Alternative explanations include the possibility that other spidroins were incorporated into some silks.

Purity assessment of organic calibration standards using a combination of quantitative NMR and mass balance.

Quantitative NMR spectroscopy (qNMR) has been examined for purity assessment using a range of organic calibration standards of varying structural complexities, certified using the traditional mass balance approach. Demonstrated equivalence between the two independent purity values confirmed the accuracy of qNMR and highlighted the benefit of using both methods in tandem to minimise the potential for hidden bias, thereby conferring greater confidence in the overall purity assessment. A comprehensive approach to purity assessment is detailed, utilising, where appropriate, multiple peaks in the qNMR spectrum, chosen on the basis of scientific reason and statistical analysis. Two examples are presented in which differences between the purity assignment by qNMR and mass balance are addressed in different ways depending on the requirement of the end user, affording fit-for-purpose calibration standards in a cost-effective manner.

Solid-state NMR as a probe of anion binding: molecular dynamics and associations in a [5]polynorbornane bisurea host complexed with terephthalate.

A range of solid-state NMR techniques is used to characterise a molecular host:guest complex consisting of a [5]polynorbornane bisurea host binding a terephthalate dianion guest. Detailed information is obtained on the molecular dynamics and associations from the point of view of both the host and guest molecules. The formation of the complex in the solid state is confirmed using (1)H 2D exchange NMR, and the 180° flipping of the (2)H-labelled terephthalate guest and its eventual expulsion from the complex at elevated temperatures are quantified using variable-temperature (2)H spin-echo experiments. Two-dimensional (1)H-(13)C HETCOR spectra obtained under fast magic angle spinning conditions (60 kHz) show a high resolution despite the poor crystallinity of the solid complex, and clearly reveal changes in the rigidity of the host molecule when complexed. Short-range intra- and intermolecular (1)H-(1)H proximities are also detected using 2D SQ-DQ correlation methods, providing insight into the molecular packing in the solid phase.

The electronic, optical and magnetic consequences of delocalization in multifunctional donor-acceptor organic polymers.

Two organic polymers containing alternating electron donating triarylamine and electron accepting thiazolo[5,4-d]thiazole (TzTz) moieties have been synthesized and their redox states investigated. When donor and acceptor units are proximal (polymer )1, electron density is delocalized, leading to a small electrical and optical band gap; these are larger with the inclusion of an adjoining alkynyl-phenyl bridge (polymer 2), where electron density is more localized due to the rotation of the monomer units. As a result, 1 and 2 display different optical and fluorescence properties in their neutral states. Upon chemical and electrochemical redox reactions, radicals form in both 1 and 2, yielding magnetic materials that display temperature-independent paramagnetism, attributable to delocalization of radical spins along the polymeric backbones. The ability to convert between diamagnetic and paramagnetic states upon chemical oxidation and/or reduction allows for the materials to display switchable magnetism and fluorescence, imparting multifunctionality to these solid-state purely organic materials.

Incorporation of 5-hydroxyindazole into the self-polymerization of dopamine for novel polymer synthesis.

Investigation into the mussel-inspired polymerization of dopamine has led to the realization that other compounds possessing potential quinone structures could undergo similar self-polymerizations in mild buffered aqueous conditions. To this end, 5-hydroxyindazole was added to a dopamine polymerization matrix in varying amounts, to study its incorporation into a polydopamine coating of silica particles. Solid-state (13) C NMR spectroscopy confirmed the presence of the indazole in the polymer shell when coated onto silica gel. SEM and DLS analysis also confirmed that the presence of the indazole in the reaction matrix yielded monodisperse polymer-coated particles, which retained their polymer shell upon HF etching, except when high levels of the indazole were used. Characterization data and examination of incorporation mechanism suggests that the 5-hydroxyindazole performs the function of a chain-terminating agent. Cytotoxicity studies of the polymer particles containing 5-hydroxyindazole showed dramatically lower toxicity levels compared to polydopamine alone.

Polymorphism and a metastable solvate of duloxetine hydrochloride.

Duloxetine hydrochloride (1) is an important antidepressant that acts as a serotonin and noradrenaline reuptake inhibitor that has only recently been characterized by single-crystal X-ray diffraction. This study describes an investigation into polymorphism of duloxetine hydrochloride, discusses the challenges of characterizing new structures, and reports a new metastable solvate (1(acetone)) where acetone is trapped in a duloxetine hydrochloride host lattice. In view of the importance of formulation processing and bioavailability characteristics of the crystalline forms of 1, a comprehensive structural study of 1(acetone) was carried out using single-crystal and powder X-ray diffraction, infrared and Raman spectroscopies, and solid-state NMR spectroscopy. The rapid desolvation from 1(acetone) to the stable unsolvated form was investigated, and the structures of free and solvated forms are discussed in terms of the noncovalent intermolecular interactions.

Ionic liquids through the looking glass: theory mirrors experiment and provides further insight into aromatic substitution processes.

Aromatic substitution of 1-fluoro-2,4-dinitrobenzene has been shown to proceed more rapidly in an ionic liquid than in ethanol, primarily due to entropic, rather than enthalpic, effects. By using molecular dynamics simulations, an anion-pi interaction appears to contribute to strong ordering within the starting material complex that accounts for the relative differences in the S(N)Ar k.

Photodynamic therapy with nanoparticles to combat microbial infection and resistance.

Infections caused by drug-resistant pathogens are rapidly increasing in incidence and pose an urgent global health concern. New treatments are needed to address this critical situation while preventing further resistance acquired by the pathogens. One promising approach is antimicrobial photodynamic therapy (PDT), a technique that selectively damages pathogenic cells through reactive oxygen species (ROS) that have been deliberately produced by light-activated chemical reactions via a photosensitiser. There are currently some limitations to its wider deployment, including aggregation, hydrophobicity, and sub-optimal penetration capabilities of the photosensitiser, all of which decrease the production of ROS and lead to reduced therapeutic performance. In combination with nanoparticles, however, these challenges may be overcome. Their small size, functionalisable structure, and large contact surface allow a high degree of internalization by cellular membranes and tissue barriers. In this review, we first summarise the mechanism of PDT action and the interaction between nanoparticles and the cell membrane. We then introduce the categorisation of nanoparticles in PDT, acting as nanocarriers, photosensitising molecules, and transducers, in which we highlight their use against a range of bacterial and fungal pathogens. We also compare the antimicrobial efficiency of nanoparticles to unbound photosensitisers and examine the relevant safety considerations. Finally, we discuss the use of nanoparticulate drug delivery systems in clinical applications of antimicrobial PDT.

Brewing coffee? - Ultra-sonication has clear beneficial effects on the extraction of key volatile aroma components and triglycerides.

Ultrasound has been investigated as a new technique for brewing coffee. A two-level factorial experimental design was conducted to identify the effects of ultra-sonication on the extraction of coffee components during ultrasonically-assisted coffee brewing. Different brews were produced by aqueous extraction from roasted ground coffee beans with sonication, and without it as a control, by varying coffee concentration (5% and 10% w/w), temperature (25 and 50 °C) and sonication time (1 and 5 min). These brews were tested for antioxidant capacity (using the ABTS assay), caffeine and triglycerides (using quantitative NMR spectroscopy) and specific aroma/flavour volatiles (using headspace SPME-GC-MS). Additional observations of colour, foaming, body and flavour were also reported. Ultrasound was found to significantly increase the extraction of caffeine, triglycerides and several of the key volatile compounds from coffee, although it did appear to decrease the concentration of antioxidants over the controls, especially with longer time and higher temperature. Furthermore, all the sonicated samples exhibited a lighter caramel colour and lower foam formation which were attributed to their higher triglyceride content. The increased concentration of triglycerides and volatiles were by far the most outstanding responses.