The nanochannel delivery system for constant testosterone replacement therapy.

INTRODUCTION: The goal of testosterone replacement is to provide long-term physiological supplementation at sufficient levels to mitigate the symptoms of hypogonadism. AIM: The objective of this work is to determine if the implantable nanochannel delivery system (nDS) can present an alternative delivery strategy for the long-term sustained and constant release of testosterone. METHODS: A formulation of common testosterone esters (F1) was developed to enable nanochannel delivery of the low water soluble hormone. In vivo evaluation of testosterone, luteinizing hormone (LH) and follicle stimulating hormone (FSH) levels by liquid chromatography/mass spectrometry and a multiplex assay, respectively, in castrated Sprague-Dawley rats implanted with nDS-F1 implants or polymeric pellets was performed over a 6-month period. The percent of testosterone concentrations observed that fell within the normal range of testosterone levels for each animal was calculated and used to compare the study groups. MAIN OUTCOME MEASURES: Sustain release of testosterone in vivo for over 6 months. RESULTS: The subcutaneous release of F1 from nDS implants exhibited sustained in vivo release kinetics and attained stable clinically relevant plasma testosterone levels. Plasma LH and FSH levels were significantly diminished in nDS-F1 implant-treated animals, confirming biological activity of the released testosterone. CONCLUSIONS: In conclusion, we demonstrate that nDS-F1 implants represents a novel approach for the treatment of male hypogonadism. Further studies will be performed in view of translating the technology to clinical use.

Real-time dynamic single-molecule protein sequencing on an integrated semiconductor device.

Studies of the proteome would benefit greatly from methods to directly sequence and digitally quantify proteins and detect posttranslational modifications with single-molecule sensitivity. Here, we demonstrate single-molecule protein sequencing using a dynamic approach in which single peptides are probed in real time by a mixture of dye-labeled N-terminal amino acid recognizers and simultaneously cleaved by aminopeptidases. We annotate amino acids and identify the peptide sequence by measuring fluorescence intensity, lifetime, and binding kinetics on an integrated semiconductor chip. Our results demonstrate the kinetic principles that allow recognizers to identify multiple amino acids in an information-rich manner that enables discrimination of single amino acid substitutions and posttranslational modifications. With further development, we anticipate that this approach will offer a sensitive, scalable, and accessible platform for single-molecule proteomic studies and applications.

Nanochannel technology for constant delivery of chemotherapeutics: beyond metronomic administration.

PURPOSE: The purpose of this study is to demonstrate the long-term, controlled, zero-order release of low- and high-molecular weight chemotherapeutics through nanochannel membranes by exploiting the molecule-to-surface interactions presented by nanoconfinement. METHODS: Silicon membranes were produced with nanochannels of 5, 13 and 20 nm using standardized industrial microfabrication techniques. The study of the diffusion kinetics of interferon α-2b and leuprolide was performed by employing UV diffusion chambers. The released amount in the sink reservoir was monitored by UV absorbance. RESULTS: Continuous zero-order release was demonstrated for interferon α-2b and leuprolide at release rates of 20 and 100 µg/day, respectively. The release rates exhibited by these membranes were verified to be in ranges suitable for human therapeutic applications. CONCLUSIONS: Our membranes potentially represent a viable nanotechnological approach for the controlled administration of chemotherapeutics intended to improve the therapeutic efficacy of treatment and reduce many of the side effects associated with conventional drug administration.

A robust nanofluidic membrane with tunable zero-order release for implantable dose specific drug delivery.

This manuscript demonstrates a mechanically robust implantable nanofluidic membrane capable of tunable long-term zero-order release of therapeutic agents in ranges relevant for clinical applications. The membrane, with nanochannels as small as 5 nm, allows for the independent control of both dosage and mechanical strength through the integration of high-density short nanochannels parallel to the membrane surface with perpendicular micro- and macrochannels for interfacing with the ambient solutions. These nanofluidic membranes are created using precision silicon fabrication techniques on silicon-on-insulator substrates enabling exquisite control over the monodispersed nanochannel dimensions and surface roughness. Zero-order release of analytes is achieved by exploiting molecule to surface interactions which dominate diffusive transport when fluids are confined to the nanoscale. In this study we investigate the nanofluidic membrane performance using custom diffusion and gas testing apparatuses to quantify molecular release rate and process uniformity as well as mechanical strength using a gas based burst test. The kinetics of the constrained zero-order release is probed with molecules presenting a range of sizes, charge states, and structural conformations. Finally, an optimal ratio of the molecular hydrodynamic diameter to the nanochannel dimension is determined to assure zero-order release for each tested molecule.

Unexpected behaviors in molecular transport through size-controlled nanochannels down to the ultra-nanoscale.

Ionic transport through nanofluidic systems is a problem of fundamental interest in transport physics and has broad relevance in desalination, fuel cells, batteries, filtration, and drug delivery. When the dimension of the fluidic system approaches the size of molecules in solution, fluid properties are not homogeneous and a departure in behavior is observed with respect to continuum-based theories. Here we present a systematic study of the transport of charged and neutral small molecules in an ideal nanofluidic platform with precise channels from the sub-microscale to the ultra-nanoscale (<5 nm). Surprisingly, we find that diffusive transport of nano-confined neutral molecules matches that of charged molecules, as though the former carry an effective charge. Further, approaching the ultra-nanoscale molecular diffusivities suddenly drop by up to an order of magnitude for all molecules, irrespective of their electric charge. New theoretical investigations will be required to shed light onto these intriguing results.

Docetaxel/2-Hydroxypropyl ß -Cyclodextrin Inclusion Complex Increases Docetaxel Solubility and Release from a Nanochannel Drug Delivery System.

Breast cancer remains the second leading cause of cancer deaths for women in the U.S. The need for new and alternative strategies to treat this cancer is imperative. Here we show the optimization of our nanochannel delivery system (nDS) for constant and sustained delivery of docetaxel (DTX) for thetreatment of triple negative breast cancer. DTX is a highly hydrophobic drug, making it difficult to reach the therapeutic levels when released in aqueous solutions from our implantable delivery system. To overcome this challenge and test the release of DTX from nDS, we prepared DTX/2-hydroxypropyl ß-cyclodextrin (DTX/HPCD) inclusion complexes in different molar ratios. The 1:10 DTX/HPCD complex achieved 5 times higher solubility than the 1:2 complex and 3 times higher in vitrorelease of DTX than with free DTX. When released in SCID/Beige mice from nanochannel system, the DTX/HPCD complex showed reduced tumor growth, comparable to the standard bolus injections of DTX, indicating that the structural stability and biological activity of DTX were retained in the complex, after its diffusion through the nanochannel system.

Leveraging electrokinetics for the active control of dendritic fullerene-1 release across a nanochannel membrane.

General adoption of advanced treatment protocols such as chronotherapy will hinge on progress in drug delivery technologies that provide precise temporal control of therapeutic release. Such innovation is also crucial to future medicine approaches such as telemedicine. Here we present a nanofluidic membrane technology capable of achieving active and tunable control of molecular transport through nanofluidic channels. Control was achieved through application of an electric field between two platinum electrodes positioned on either surface of a 5.7 nm nanochannel membrane designed for zero-order drug delivery. Two electrode configurations were tested: laser-cut foils and electron beam deposited thin-films, configurations capable of operating at low voltage (≤1.5 V), and power (100 nW). Temporal, reproducible tuning and interruption of dendritic fullerene 1 (DF-1) transport was demonstrated over multi-day release experiments. Conductance tests showed limiting currents in the low applied potential range, implying ionic concentration polarization (ICP) at the interface between the membrane's micro- and nanochannels, even in concentrated solutions (≤1 M NaCl). The ability of this nanotechnology platform to facilitate controlled delivery of molecules and particles has broad applicability to next-generation therapeutics for numerous pathologies, including autoimmune diseases, circadian dysfunction, pain, and stress, among others.

Sustained zero-order release of intact ultra-stable drug-loaded liposomes from an implantable nanochannel delivery system.

Metronomic chemotherapy supports the idea that long-term, sustained, constant administration of chemotherapeutics, currently not achievable, could be effective against numerous cancers. Particularly appealing are liposomal formulations, used to solubilize hydrophobic therapeutics and minimize side effects, while extending drug circulation time and enabling passive targeting. As liposome alone cannot survive in circulation beyond 48 h, sustaining their constant plasma level for many days is a challenge. To address this, we develop, as a proof of concept, an implantable nanochannel delivery system and ultra-stable PEGylated lapatinib-loaded liposomes, and we demonstrate the release of intact vesicles for over 18 d. Further, we investigate intravasation kinetics of subcutaneously delivered liposomes and verify their biological activity post nanochannel release on BT474 breast cancer cells. The key innovation of this work is the combination of two nanotechnologies to exploit the synergistic effect of liposomes, demonstrated as passive-targeting vectors and nanofluidics to maintain therapeutic constant plasma levels. In principle, this approach could maximize efficacy of metronomic treatments.

Silicon micro- and nanofabrication for medicine.

This manuscript constitutes a review of several innovative biomedical technologies fabricated using the precision and accuracy of silicon micro- and nanofabrication. The technologies to be reviewed are subcutaneous nanochannel drug delivery implants for the continuous tunable zero-order release of therapeutics, multi-stage logic embedded vectors for the targeted systemic distribution of both therapeutic and imaging contrast agents, silicon and porous silicon nanowires for investigating cellular interactions and processes as well as for molecular and drug delivery applications, porous silicon (pSi) as inclusions into biocomposites for tissue engineering, especially as it applies to bone repair and regrowth, and porous silica chips for proteomic profiling. In the case of the biocomposites, the specifically designed pSi inclusions not only add to the structural robustness, but can also promote tissue and bone regrowth, fight infection, and reduce pain by releasing stimulating factors and other therapeutic agents stored within their porous network. The common material thread throughout all of these constructs, silicon and its associated dielectrics (silicon dioxide, silicon nitride, etc.), can be precisely and accurately machined using the same scalable micro- and nanofabrication protocols that are ubiquitous within the semiconductor industry. These techniques lend themselves to the high throughput production of exquisitely defined and monodispersed nanoscale features that should eliminate architectural randomness as a source of experimental variation thereby potentially leading to more rapid clinical translation.

Leveraging nanochannels for universal, zero-order drug delivery in vivo.

Drug delivery is essential to achieve effective therapy. Herein we report on the only implantable nanochannel membrane with geometrically defined channels as small as 2.5 nm that achieves constant drug delivery in vivo. Nanochannels passively control the release of molecules by physico-electrostatic confinement, thereby leading to constant drug diffusion. We utilize a novel design algorithm to select the optimal nanochannel size for each therapeutic agent. Using nanochannels as small as 3.6 and 20 nm, we achieve sustained and constant plasma levels of leuprolide, interferon α-2b, letrozole, Y-27632, octreotide, and human growth hormone, all delivered at clinically-relevant doses. The device was demonstrated in dogs, rats, and mice and was capable of sustaining target doses for up to 70 days. To provide evidence of therapeutic efficacy, we successfully combined nanochannel delivery with a RhoA pathway inhibitor to prevent chronic rejection of cardiac allografts in a rat model. Our results provide evidence that the nanochannel platform has the potential to dramatically improve long-term therapies for chronic conditions.

Gated and near-surface diffusion of charged fullerenes in nanochannels.

Nanoparticles and their derivatives have engendered significant recent interest. Despite considerable advances in nanofluidic physics, control over nanoparticle diffusive transport, requisite for a host of innovative applications, has yet to be demonstrated. In this study, we performed diffusion experiments for negatively and positively charged fullerene derivatives (dendritic fullerene-1, DF-1, and amino fullerene, AC60) in 5.7 and 13 nm silicon nanochannels in solutions with different ionic strengths. With DF-1, we demonstrated a gated diffusion whereby precise and reproducible control of the dynamics of the release profile was achieved by tuning the gradient of the ionic strength within the nanochannels. With AC60, we observed a near-surface diffusive transport that produced release rates that were independent of the size of the nanochannels within the range of our experiments. Finally, through theoretical analysis we were able to elucidate the relative importance of physical nanoconfinement, electrostatic interactions, and ionic strength heterogeneity with respect to these gated and near-surface diffusive transport phenomena. These results are significant for multiple applications, including the controlled administration of targeted nanovectors for therapeutics.