[Molecular characterization of Staphylococcus aureus ST6 and ST7 isolates from food-borne illness outbreaks].

Objective: To analyze the Staphylococcal enterotoxins, Staphylococcal enterotoxin genes, drug resistance and molecular typing of 41 Staphylococcus aureus isolates from 2 food-borne illness outbreaks on 21 August and 27 September 2020 in Guangzhou. Methods: A total of 41 Staphylococcus aureus isolates from 2 outbreaks were analyzed by multilocus sequence typing (MLST) and spa typing. The Staphylococcal enterotoxins typing and the Staphylococcal enterotoxin genes of the isolates were analyzed by ELISA and PCR, respectively. The antimicrobial susceptibility of the isolates was performed by disc diffusion. 21 Staphylococcus aureus isolates were characterized using whole genome sequencing (WGS). Based on the whole genome single nucleotide polymorphism (SNP), the phylogenetic tree was constructed by Snippy. Results: 41 Staphylococcus aureus isolates were divided into 2 types by MLST and spa typing: ST6-t701 and ST7-t091. 2 ST7-t091 isolates were identified as methicillin-resistant Staphylococcus aureus (MRSA). 25 ST7-t091 isolates and 14 ST6-t701 isolates were methicillin-sensitive Staphylococcus aureus (MSSA), and were resistant to 7 and 6 antibiotics, respectively. All isolates were positive for sea by PCR. WGS revealed all 21 isolates carried scn, sak, sea, hla, hld, hlgA, hlgB, hlgC, lukD virulence genes. The results showed the isolates contained an immune evasion cluster type D which located in bacteriophage ϕSa3. The SNP phylogenetic tree showed 2 MRSA ST7-t091 were constituted a separate clade from the 12 MSSA ST7-t091 isolates and 7 ST6-t701 isolates showed high similarity to each other. Conclusion: Base on the results of phylogenetic analysis, the 2 food-borne illness outbreaks occurred on 21 August and 27 September 2020 are caused by the combination of the MRSA ST7-t091 strain and the MSSA ST7-t091 strain, and the MSSA ST6-t701 strain, respectively. All isolates have high level of antibiotic resistance and carry high virulent genes.

Mutations in 23S rRNA and ribosomal protein L4 account for resistance in Chlamydia trachomatis strains selected in vitro by macrolide passage.

Thirteen strains of Chlamydia trachomatis were exposed to subinhibitory concentrations of erythromycin (0.5 microg ml(-1)), azithromycin (0.5 microg ml(-1)) and josamycin (0.04 microg ml(-1)) to select macrolide-resistant mutants with serial passages. The C. trachomatis mutants presented with low-level resistance to erythromycin, azithromycin and josamycin for which a 16-fold increase, a 16-fold increase and an 8-fold increase respectively in the minimal inhibitory concentration (MICs) for the mutant strains compared with the MIC for the susceptible strains were found. The results of chemosensitivity showed that josamycin had the highest susceptibility rate compared with erythromycin and azithromycin in the treatment of C. trachomatis. The ribosomal protein L4 and 23S rRNA genes of the susceptible and resistant strains of C. trachomatis were partially sequenced. A double mutation was found in ribosomal protein L4 of the mutants, leading to Pro109(CCG)-->Leu(CTG), and Pro151(CCG)-->Ala(GCC) (Escherichia coli numbering) in the corresponding protein, but these mutations were also found in parent strains. An investigation into the sequences of 23S rRNAs in the mutants revealed point mutations of A2057G, A2059G and T2611C (E. coli numbering). These results suggest that point mutations located in 23S rRNA were associated with macrolide resistance in C. trachomatis.

Hyaluronic acid-poly-D-lysine-based three-dimensional hydrogel for traumatic brain injury.

Brain tissue engineering in the postinjury brain represents a promising option for cellular replacement and rescue, providing a cell scaffold for either transplanted or resident cells. In this article, a hyaluronic acid (HA)-poly-D-lysine (PDL) copolymer hydrogel with an open porous structure and viscoelastic properties similar to neural tissue has been developed for brain tissue engineering. The chemicophysical properties of the hydrogel with HA:PDL ratios of 10:1, 5:1, and 4:1 were investigated by scanning electron microscopy (SEM) and X-ray photoelectron spectrometry. Neural cells cultured in the hydrogel were studied by phase-contrast microscope and SEM. The incorporation of PDL peptides into the HA-PDL hydrogel allowed for the modulation of neuronal cell adhesion and neural network formation. Macrophages and multinucleated foreign body giant cells found at the site of implantation of the hydrogel in the rat brain within the first weeks postimplantation decreased in numbers after 6 weeks, consistent with the host response to inert implants in numerous tissues. Of importance was the infiltration of the hydrogel by glial fibrillary acidic protein-positive cells-reactive astrocytes-by immunohistochemistry and the contiguity between the hydrogel and the surrounding tissue demonstrated by SEM. These findings indicated the compatibility of this hydrogel with brain tissue. Collectively, the results demonstrate the promise of an HA-PDL hydrogel as a scaffold material for the repair of defects in the brain.

Hyaluronic acid hydrogel as Nogo-66 receptor antibody delivery system for the repairing of injured rat brain: in vitro.

Nogo-66 and NgR are important receptors inhibiting neuronal regeneration and therefore are targets for treating CNS injury. Antagonists of this receptor including blocking antibodies are potential therapeutic agents for CNS axonal injuries such as spinal cord and brain trauma. A new antibody (IgG) releasing system has been developed by covalently attaching IgG to the biodegradable hyaluronic acid (HA) hydrogel via the hydrolytically unstable hydrazone linkage, aiming to deliver the antibody of CNS regeneration inhibitors to the injured brain. In this paper we describe the synthesis, physico-chemical characteristics and test results of biological activity of antibody released from hyluronic acid hydrogel. To form the conjugates the antibody is attached to the polymer backbone using a condensation reaction between aldehyde group of the antibody and hydrazide group of the HA hydrogel. Furthermore, pH sensitive linkage-hydrozone has been formed between hydrogel and antibody. The amount of conjugated antibodies can reach 135 microg antibody/mg hydrogel in the dry state. At low pH, the antibodies released quite fast. However, the antibodies released much slower in neutral and alkaline environment. The bioactivity of antibody released from hydrogel was retained as demonstrated by indirect immunofluorescence technique.

Culture of neural cells on silicon wafers with nano-scale surface topograph.

The adherence and viability of central neural cells (substantia nigra) on a thin layer of SiO(2) on Si wafers with different surface roughness were investigated. Variable roughness of the Si wafer surface was achieved by etching. The nano-scale surface topography was evaluated by atomic force microscopy. The adherence and subsequent viability of the cells on the wafer were examined by scanning electron microscopy (SEM) and fluorescence immunostaining of tyrosine hydroxylase (TH). It is found that the surface roughness significantly affected cell adhesion and viability. Cells survived for over 5 days with normal morphology and expressed neuronal TH when grown on surfaces with an average roughness (Ra) ranging from 20 to 50 nm. However, cell adherence was adversely affected when surfaces with Ra less than 10 nm and rough surfaces with Ra above 70 nm were used as the substrate. Such a simple preparation procedure may provide a suitable interface surface for silicon-based devices and neurones or other living tissues.

Primary insertion of osseointegrated dental implants into fibula osteoseptocutaneous free flap for mandible reconstruction.

Twelve patients with segmental mandibular defects were reconstructed with fibula osteoseptocutaneous flaps and simultaneous placement of osseointegrated implants. Decision to perform this procedure was based on the facts that all patients had benign diseases, did not require postoperative radiotherapy, were in good general and oral conditions, and were psychologically motivated. A total of 34 fixtures was inserted in the first stage. Eight patients underwent second stage surgery, which consisted of connection of the implant abutments to the fixtures and the use of palatal mucosal grafts around the implants. Final dental prostheses were fixed 1 month later in seven patients, at this time. All flaps survived after surgery, and no implant failure was observed after a mean follow-up period of 25 months. Only one fixture was not used during the subsequent stage and was left as a sleeper. Fixed dental prostheses were used in five patients and removable overlay prostheses in the other two. Chewing function was recovered between 4 and 6 weeks after the start using the definitive dental prosthesis. In contrast to previous results, we conclude that excellent results can be achieved when this combined procedure is used in carefully selected patients. In addition, it is confirmed that the fibula osteoseptocutaneous flap is a versatile, reliable composite tissue that facilitates primary placement of osseointegrated dental implants during mandible reconstruction, thus allowing full oral rehabilitation in a shorter period of time.

Carpal bone dislocations: review of 20 cases.

Twenty cases of carpal bone dislocation were encountered during a 7-year period, with an average of 27 months of follow-up. There were 10 types of dislocation in this series, the most common type was transscaphoid perilunate dislocation seen in 9 cases. In addition, there were 2 scaphoid subluxations, 1 volar lunate dislocation, 1 dorsal perilunate dislocation, 1 scaphoid perilunate dislocation, 1 hamate and pisiform dislocation, 1 transhamate pisiform dislocation, 1 trapezoid and 2-5 carpometacarpal joint dislocation, 1 trapezium, trapezoid and 2-4 carpometacarpal joint dislocation, and 2 trapezium periscapholunate dislocations. Methods of treatment included open reduction, closed reduction, proximal row carpectomy, total wrist arthrodesis, and excision of the lunate. In this series, the patterns of dislocation were different for crushing injuries and dorsiflexion injuries. The clinical results associated with the soft tissue injuries of the ipsilateral hand were mostly caused by crushing forces. Although carpal instabilities were noted, there was no significant correlation between the clinical and radiographic results in some of our cases. Best results invariably relied on a stable anatomic reduction and an adequate period of immobilization. Poor results were demonstrated in those cases with incomplete initial reduction, secondary degenerative arthrosis, or nonunion.

Medical methods for cervical ripening before the removal of intrauterine devices in postmenopausal women: a systematic review.

In China, most women with intrauterine devices (IUDs) ask to have them removed following the menopause. As the cervix is stenotic after the menopause and most IUDs do not have a thread attached, various medical methods are used for cervical ripening prior to IUD removal. A systematic review of the relevant literature was conducted to compare different medical methods for cervical priming with no treatment, or with other methods, prior to IUD removal in postmenopausal women. Multiple electronic databases including the Cochrane Central Register of Controlled Trials, EMBASE, MEDLINE, the WHO Reproductive Health Library (2011) and the Chinese Biomedical Literature Database were searched systematically. Reference lists of articles published in English or Chinese between 1980 and 2011 were searched. All randomized controlled trials (RCTs) on IUD removal following the menopause using medical agents compared with no treatment, or with other treatments, were included. Outcomes were the ease of IUD removal, need for forced cervical dilatation, cervical width, procedure time, severe pain and any side-effects. Data were processed using RevMan 5 software. Thirty original RCTs were eligible for inclusion. Most medical agents such as oestrogens, mifepristone, misoprostol and methyl carboprost were highly effective for facilitating IUD removal, and reduced the need for further dilatation during the procedure. In particular, treatment with mifepristone or misoprostol prior to IUD removal was found to increase the width of the cervical canal and reduce the procedure time. Mifepristone was more effective than vaginal misoprostol for cervical dilatation, but it showed similar effectiveness to misoprostol and nilestriol in terms of the ease of IUD removal. Sublingual misoprostol was superior to oral misoprostol for facilitating IUD removal. A dose of misoprostol as low as 200µg was effective for cervical priming. For vaginal and oral misoprostol, the optimum times of application were 2-3h and 1 day prior to the procedure, respectively. All the prophylactic medical methods were able to alleviate pain during IUD removal, and vaginal misoprostol was more effective than nilestriol. Uterine injury was more common with no treatment and with nilestriol. Gastrointestinal side-effects such as nausea and diarrhoea were common with oral misoprostol and vaginal misoprostol, respectively. Therefore, mifepristone or sublingual misoprostol should be the medical treatments of choice. Oestrogen regimens might be alternatives when mifepristone or misoprostol are contraindicated, and there is a need for further study on combined regimens for cervical priming.

Hyaluronic acid hydrogels with IKVAV peptides for tissue repair and axonal regeneration in an injured rat brain.

A biocompatible hydrogel of hyaluronic acid with the neurite-promoting peptide sequence of IKVAV was synthesized. The characterization of the hydrogel shows an open porous structure and a large surface area available for cell interaction. Its ability to promote tissue repair and axonal regeneration in the lesioned rat cerebrum is also evaluated. After implantation, the polymer hydrogel repaired the tissue defect and formed a permissive interface with the host tissue. Axonal growth occurred within the microstructure of the network. Within 6 weeks the polymer implant was invaded by host-derived tissue, glial cells, blood vessels and axons. Such a hydrogel matrix showed the properties of neuron conduction. It has the potential to repair tissue defects in the central nervous system by promoting the formation of a tissue matrix and axonal growth by replacing the lost tissue.

Hyaluronic acid hydrogel immobilized with RGD peptides for brain tissue engineering.

In this paper, hyaluronic acid hydrogels with open porous structure have been developed for scaffold of brain tissue engineering. A short peptide sequence of arginine-glycine-aspartic acid (RGD) was immobilized on the backbone of the hydrogels. Both unmodified hydrogels and those modified with RGD were implanted into the defects of cortex in rats and evaluated for their ability to improve tissue reconstruction. After 6 and 12 weeks, sections of brains were processed for DAB and Glees staining. They were also labeled with GFAP and ED1 antibodies, and observed under the SEM for ultrastructral examination. After implanting into the lesion of cortex, the porous hydrogels functioned as a scaffold to support cells infiltration and angiogenesis, simultaneously inhibiting the formation of glial scar. In addition, HA hydrogels modified with RGD were able to promote neurites extension. Our experiments showed that the hyaluronic acid-RGD hydrogel provided a structural, three-dimensional continuity across the defect and favoured reorganization of local wound-repair cells, angiogenesis and axonal growth into the hydrogel scaffold, while there was little evidence of axons regeneration in unmodified hydrogel.

High-pressure injection injuries of the hand.

The majority of high-pressure injection injuries can produce serious damage to the hand. Nevertheless, the injury may follow a relatively benign course if the injected substance possesses a less harmful nature. Treatment for these injuries requires immediate and aggressive surgery in most circumstances, but conservative treatment may be justified in certain instances. During a 4-year period, eight cases of high-pressure injection injury were encountered. The types of injected material were: four from paint, and one each from grease, water, benzene, and hydraulic oil. Time is an important factor regarding the results, while the types of injected material modify the clinical courses. It is advisable that the etiology of high-pressure injection injury should be established initially, and this factor be taken into consideration in choosing treatment options.