Food waste and soybean curd residue composting by black soldier fly.

This study attempted to manage the food waste and soybean curd residue generated in Taiwan's National Ilan University by black soldier fly-aided co-composting. The food waste and soybean curd residue were co-composted with rice husk as a bulking agent in 4:1 ratio and 0.42 mg BSF/g waste. The higher organic matter degradation of 31.9% was found in Container B (black soldier flies aided food waste and rice husk co-composting) with a rate constant of 0.14 d-1. In Container D (black soldier flies aided soybean curd residue and rice husk co-composting), the organic matter degradation of 29.4% was found with a rate constant of 0.29 d-1. The matured compost of 6.02 kg was obtained from 20 kg of food waste, while 5.83 kg of matured compost was generated from 20 kg of soybean curd residue. The physico-chemical parameters of the final matured compost were in the favorable range of Taiwan's compost standards. The germination index was 188.6% and 194.78% in Containers B and D, respectively. The present study will expand the application of BSF at the institutional level which prove to be a feasible solution for rapid, clean, and efficient composting of post-consumer food wastes.

Making basic health care accessible to rural communities: a case study of Kiang West district in rural Gambia.

This study focuses on lack of access to basic health care, which is one of the hindrances to the development of the poor, and subjects them to the poverty penalty. It also focuses on contributing to the Bottom of the Pyramid in a general sense, in addition to meeting the health needs of communities where people live on less than $1 a day. Strengthened multistakeholder responses and better-targeted, low-cost prevention, and care strategies within health systems are suggested to address the health burdens of poverty-stricken communities. In this study, a multistakeholder model which includes the government, World Health Organization, United Nations Children Emergency Fund, and the Medical Research Council was created to highlight the collaborative approach in rural Gambia. The result shows infant immunization and antenatal care coverage were greatly improved which contributes to the reduction in mortality. This case study also finds that strategies addressing health problems in rural communities are required to achieve 'Millennium Development Goals'. In particular, actual community visits to satellite villages within a district (area of study) are extremely vital to making health care accessible.

Carbon footprint assessment of recycling technologies for rare earth elements: A case study of recycling yttrium and europium from phosphor.

Rare earth elements are key raw materials in high-technology industries. Mining activities and manufacturing processes of such industries have caused considerable environmental impacts, such as soil erosion, vegetation destruction, and various forms of pollution. Sustaining the long-term supply of rare earth elements is difficult because of the global shortage of rare earth resources. The diminishing supply of rare earth elements has attracted considerable concern because many industrialized countries regarded such elements as important strategic resources for economic growth. This study aims to explore the carbon footprints of yttrium and europium recovery techniques from phosphor. Two extraction recovery methods, namely, acid extraction and solvent extraction, were selected for the analysis and comparison of carbon footprints. The two following functional units were used: (1) the same phosphor amounts for specific Y and Eu recovery concentrations, and (2) the same phosphor amounts for extraction. For acid extraction method, two acidic solutions (H2SO4 and HCl) were used at two different temperatures (60 and 90°C). For solvent extraction method, acid leaching was performed followed by ionic liquid extraction. Carbon footprints from acid and solvent extraction methods were estimated to be 10.1 and 10.6kgCO2eq, respectively. Comparison of the carbon emissions of the two extraction methods shows that the solvent extraction method has significantly higher extraction efficiency, even though acid extraction method has a lower carbon footprint. These results may be used to develop strategies for life cycle management of rare earth resources to realize sustainable usage.

Voluntary GHG reduction of industrial sectors in Taiwan.

The present paper describes the voluntary greenhouse gas (GHG) reduction agreements of six different industrial sectors in Taiwan, as well as the fluorinated gases (F-gas) reduction agreement of the semiconductor and Liquid Crystal Display (LCD) industries. The operating mechanisms, GHG reduction methods, capital investment, and investment effectiveness are also discussed. A total of 182 plants participated in the voluntary energy saving and GHG reduction in six industrial sectors (iron and steel, petrochemical, cement, paper, synthetic fiber, and textile printing and dyeing), with 5.35 Mt reduction from 2004 to 2008, or 33% higher than the target goal (4.02 Mt). The reduction accounts for 1.6% annual emission or 7.8% during the 5-yr span. The petrochemical industry accounts for 49% of the reduction, followed by the cement sector (21%) and the iron and steel industry (13%). The total investment amounted to approximately USD 716 million, in which, the majority of the investment went to the modification of the manufacturing process (89%). The benefit was valued at around USD 472 million with an average payback period of 1.5 yr. Moreover, related energy saving was achieved through different approaches, e.g., via electricity (iron and steel), steam and oil consumption (petrochemical) and coal usage (cement). The cost for unit CO(2) reduction varies per industry, with the steel and iron industrial sector having the highest cost (USD 346 t(-1) CO(2)) compared with the average cost of the six industrial sectors (USD 134 t(-1) CO(2)). For the semiconductor and Thin-Film Transistor LCD industries, F-gas emissions were reduced from approximately 4.1 to about 1.7 Mt CO(2)-eq, and from 2.2 to about 1.1 Mt CO(2)-eq, respectively. Incentive mechanisms for participation in GHG reduction are also further discussed.

Using a composite material containing waste tire powder and polypropylene fiber cut end to recover spilled oil.

The superior oil absorption capacity of recycled polypropylene (PP) fiber and waste tire powder were used to recover spilled engine oil. We used ASTM F726-99 method to evaluate oil adsorbing capability of PP fiber and found it to have a large, rapid oil sorption capacity. However, its lack of elasticity dramatically limited that capacity after repeated use. Tire powder, which absorbs less oil more slowly, is more elastic than PP fiber and can be used repeatedly up to a hundred times without losing its oil adsorption capability. We combined PP fiber and tire powder to develop a composite material capable of recovering greater amounts of oil than any of its components. This composite can be use repeatedly for at least 100 times. Thus, the material cost for recovering 1 ton of spilled oil is about USD $0.03, making it very competitive on the market.